PROVISION OF 10 HP CENTRIFUGAL PUMP AT MES COMPELX AND PROVN OF STANDBY CHLORONOME PLANT AT AF STN BHOWALI.

Supply and fix GI tubing medium grade fixed to wall or alid in floors of size 80 MM dia including sockets reducers flanges etc complete all as specified and directed

Supply and fix UPVC pressure pipe PN 10 suitable for suction line from sump to pump set including all accessories like sockets, bends reducers laid and testing complete for 90 MM Dia complete all as specified and directed.

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 80mm dia

Supply and fix Strainer Y type conforming to IS, size 80 mm (3”) dia.

Supply and fix Valves, Sluice, flanged of class 1.6 PN ,80 mm (3”)dia.

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Earthing complete with GI earthplate of size 600X600X3.15 mm thick electrode burried directly in ground (Earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level connected by bracing / welding to 32X 6 MM Aluminum strip as earth lead by means of bolts nuts check nuts and washers of GI and GI tubing 20 MM bore light grade for earth lead protection upto main earth test point and including concrete pit in PCC 1;3;6 type C1 pre cast PCC 1;2;4 type B1 Cover slab 54X54X5 CM with one handle for lifting made out of 8 MM dia MS Bar , wire mesh 20 MM bore GI tubing for watering , charcol or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No 3 of SSR Part 1 and testing on completion complete all as specified and directed.

Supply install testing and commissioning of Centrifugal monoblock pump set 10 HP 415 Volt 3 Phase 50 Hz Sucton size 65 MM dia delivery 50 MM dia CI Impeller Cast iron body Max delivery 7.2 LPS 2900 RPM complete with motor and pump . Make Kirloskar KDS ++ or equivalent

Supply install testing and commissioning of starter panel made with CRCA powder coated sheet steel panel including panel fabrication , mounting, wiring complete with the following accessories a) Schneider Altistart 01 ATS01N232QN , 32 A 380-415 V , 15 KW soft starter -01 Nos b) 4 Pole MCCB 32 A , 25 KA suitable for 415 V with thermal and magnetic protection.-01 Nos c) AC-3 rated contactor suitable for 10 HP mptor-01 Nos d) Thermal over load relay , adjustable range selected according to motor name plate current- 01 Nos e) Phase failure/Phase sequence relay 415 V 3 Phase-01 Nos f) Control MCB 2 Pole 6 A -01 Nos g) Auto manual selector switch , start / stop push buttons and emergency stop- set 01 h) RYB phase indicater lamps - 01 Set j)Copper bus bar , terminal blocks control wiring PVC sleeves ferrules lugs cable glands and internal accessories -01 Set

Supply laying and connecting cable XLPE 1100 V grade insulated wire or strip armoured of size 35 Sq MM 3.5 Core from existing panel board to starter and mortor complete all as specified and as directed.