Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹26,850
Closing Date
15 Sept 2026, 2:30 pm5d left
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
90 days
Expenditure
General
LV
3 conditions · 3 needing a document upload
1. Only OEM or OEM authorized dealers should quote. If authorized dealers are quoting, they should attach the tender specific authorizations letter from OEM for this tender. Else their offers shall be ignored. 2. [a] The tenderer with past performance of satisfactory execution of contracts to South Central Railway, or Other Zonal Railways/Production units[PUs] for supply of the same/similar i.e., 125 KVA DG Set for a quantity of one number or more quantity against a single contract during last three years prior to, and excluding tender opening date may be considered as responsive to South Central Railways requirements for placement of bulk and regular order. [b] Tenderers are requested to submit the past performance report for supply of same or similar items; such as copies of Receipt Notes[R.Notes] or Consignee Receipt and Acceptance Certificate [CRAC] or Proof of acceptance of material by the consignee etc. along with their offer; failing which offer will be summarily rejected without making any back reference. However, in cases where the tenderers are having satisfactory past supply performances of Same or Similar items, within South Central Railway or other Zonal Railways/ Production units, the supply performance data available in iMMIS under Vendor Performance with ALL-RAILWAY shall be taken into consideration while evaluating the offers of the tenderers.
1. Firm should submit Clause by Clause compliance for the specifications attached to the tender. 2. Firm should clearly bring out any deviations in the bid quoted. Later any technical deviations will not be entertained.
SCOPE OF SUPPLY : Supply Installation Testing And commissioning of 125KVA at 0.8 pf 415V 50 Hz 3 phase CPCB IV+ DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled (as per Specification). AND Including the civil work. NOTE:- Firm Should quote all inclusive for the above mentioned Scope of Supply as per the specification attached including the civil work.
20 conditions · 1 needing a document upload
a) It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. b) Offers with PVC will be summarily rejected. c) I/We agree to supply the tendered stores at the rates quoted by me/us inaccordance with the IRS Conditions of Contract and [or] special and [or]other conditions specified/attached with the tender. d) I/We agree to accept General Tender Conditions available at SOUTH CENTRAL RAILWAY STORES AND INSTRUCTIONS TO TENDERERS FOR E-TENDERS AS PER DOCUMENTS LINK. https://www.ireps.gov.in/epsn/works/irepsDocuments.do? activity=display&request For=supply. e) For GST conditions, tenderers are requested to refer the General Conditions / Instructions to tenderers. f) Please enter the percentage of local content in the material being offered.Please enter 0 for fully imported items, and 100 for fully indigenous items.The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions. g) This tender complies with public procurement policy (make in india) order-2017, date 15-06-2017., issued by department of Industrial promotion andpolicy, Ministry of commerce, circulated vide Railway Board letter no.2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017. h) All other terms and conditions as per IRS Conditions of Contract with latest amendments and latest General Tender Conditions, Instructions to Tenderers as attached with NIT and /or available in Public Documents of South- Central Railway Stores Department on IREPS website updated latest as on Tender Opening Date shall be applicable.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
By TPI [THIRD PARTY INSPECTION] Agency
Firms should provide the details of Place of Inspection
Firms are advised to quote as per delivery schedule mentioned in the tender. Offers with large variation from tendered delivery schedule are liable to be ignored, also Bidders quoting abnormally longer Delivery periods are liable to be rejected.
a) Security Deposit (SD) for Stores Contracts will be applicable as per tender conditions attached with this tender. (a) The Security Deposit amount shall be 5% of the value of the contract subject to Maximum of Rs. 50 lakhs. (b) There shall be no exemption from submission of Security Deposit (SD) for any tender or by any tenderer except exemptions as per tender conditions attached with this tender. (c) In case of failure by contractor to meet deliveries for any lot, Railways may cancel the contract for defaulted part by forfeiting SD commensurate to that lot. Wherever SD has been exempted, for any reason, and the supplier fails to supply goods as per conditions of contract, as amended from time to time, Purchaser shall have right to levy damages from the supplier for failing to comply with the contractual conditions, not by way of penalty, an amount equal to SD amount, as would have been applicable if the contract was with a non-exempted vendor. These damages shall be treated as recoveries outstanding against the vendor and dealt with accordingly. b) Delivery of the material & documents if any, to be sent to the Consignee only. 1]. 1 Consignee details: KONANGI SUNIL KUMAR, JE/E/M/HX, [9701374320], office of Senior Section Engineer / Elec/Maintenance/ Kadapa, South Central Railway, Kadapa, Kadapai (dist), ANDHRA PRADESH _516001. For payment details firm should contact the consignee only and not to buyer/Purchaser. 2] Bill passing officer: Sr.DEE/Elec/M/GTL (9701374300) 3] Bill paying officer: Accounts Department (9701374100 / 9701374103).
I/We hereby undertake not to withdraw or modify or impair or derogate from the bid in any respect within the period of validity of this bid/tender. I/we undertake that the information/documents furnished in this bid are not false, misleading or forged. On later date any documents/Information furnished by me/us is found misleading or forged or false, we shall bear the responsibility for the same and we are liable to be prosecuted and penalized as per law of the land.
Timely Commissioning of M&P /items: In the event of contractors failure t o have M&P commissioned by the time or times respectively as specified in contract, consignee may withhold deduct or recover from the contractor as penalty a sum @2% (Two Percent) of the price of M&P which the contractor has failed to commission as aforesaid for each and every month (Part of month being treated as a full month) during which the M&P may not have been commissioned, subject to an upper limit of10% (Ten Percent) of contract value.Warranty period for M&P will be 24(Twenty Four) months from the date of Commissioning and proving out of M&P, A maximum period of 02 (Two) weeks will be allowed for attending and rectification of faults during the warranty period.Maximum downtime during the guarantee period shall be 2% for on line and 10% for offline M&P calculated on quarterly basis, in the event of contractors failure to have M&P commissioned by the time or times respectively.A penalty of 0.5% per week of the contract value will be levied for delay in response time for attending and rectification of faults beyond specified time during the guarantee period as detailed above.Maximum penalty to be levied on account of guarantee failure shall be 5% of contract value calculated during whole of contract period and after that if there is any delay on the part of supplier, purchaser shall be entitled for encashment of bonds. In such cases of bad performance of firm during the guarantee/warranty period, the same shall be recorded and circulated to all railways. The same shall be given due regard in deciding future orders on the firm and when evidence to the contrary is not available, the firm may be even rejected.
1 condition
Firm should quote for atleast 50% of the tendered quantity and any firms who quote less than 50% of the tendered quantity their offer will be summarily rejected.
1 location across Andhra Pradesh · 1 Numbers total
Supply Installation Testing And commissioning of 125KVA at 0.8 pf 415V 50 Hz 3 phase CPCB IV+ DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled.
LV265467A~SCR
LV265467A
Open - Indigenous
Goods
Andhra Pradesh
₹0
₹26,850
31 Aug 2026
31 Aug 2026
1 item · 1 Numbers total
Supply Installation Testing And commissioning of 125KVA at 0.8 pf 415V 50 Hz 3 phase CPCB IV+ DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled. Alternator 1. 1500 RPM, 1P or 3P, Brushless type, screen protected , revolving field, Self-excited alternator conforming to IS/IEC 60034-1 IP23, with standard Alternator Protection (over volt age, over speed & Under voltage) 2. A reliable long life with superior class 'H' insulation with temperature rise to Class H Diesel Engine: Engine: Engine should comprise of Silencer, Electronic governor from >25 KVA & above, suitable rating battery , Battery charging alternator, battery charger , Inbuilt Fuel tank with fuel pipe, AVM pads , Control panel with 3P MCCB of suitable rating with short circuit protections (25kA,36kA, 50kA) with microprocessor based controller indicating genset parameters ( i.e. volt, amps, KWH, KVAR, Hrs etc.), The diesel engine shall be capable of providing 10% overload for 1 Hr for every 11 Hrs of continuous running at full load. The DG set shall be supplied as per OEM specifications and s hall be tested at site along with below. 1. CRDI Engine >25 KVA DG set 2. Water cooled Radiator coupled to engine 3. Dr y type air cleaner with service indicator 4. First fill of lube oil, Coolant & first fill of Diesel 5. Electrical starter motor with soft start System 6. Battery charging alternator 7. Remote Monitor system >58.5 KVA & Above 8. 2 years / 5000 Hrs Wa rranty from commissioning or 30-month form supply. 9. Emission control system - EGR & (DOC, SCR for >75 KVA DG set ) 10.10 Mtrs Exhaust pipe from Silencer Genset Controller: 1. Microprocessor based genset monitoring, metering and co ntrol system with full graphics LCD display for easy front panel access. 2. AMF relay, manual and remote start / stop mo des for 1-ph & 3-ph gensets 3. Backlit and full graphics display with power saving feature 4. Engine parameter monitori ng -Lube oil pressure, Engine coolant temperature, Fuel level, Battery voltage, Engine running hours 5. AC Alternator pa rameter monitoring -Voltage L-N & L_L, Current, kW, kVA (Phase & Total), Frequency, kWH, PF 6. Genset Protection: Engi ne: Low lube oil pressure, High coolant temperature, Battery High/Low Volts, Fail to Start, Sensor failure, Low fuel level, Overspeed AC Alternator: Over/Under Voltage, Over/Under, Frequency, Loss of AC sensing, Over frequency, Over Curren t, kW Overload, Unbalancing load 7. Maintenance notification based on Engine Run Hour & due date 8.Communication: USB port, RS485, CAN 9.30-50 Event logs Acoustic Enclosure: 1. Specially designed to meet stringent MOEF/CPCB IV+ n orms 2. Weatherproof, powder coated Acoustic enclosure for DG set for sound attenuation fabricated from 1.2 mm / 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.2mm /1.6 mm CRCA sheet and filled with PU Foam/Roc kwood for Fire retardant acoustic and for better safety 3. Designed to operate in extreme climatic conditions in tempera tures ranging from -10 deg to 55 deg without any external aid 4. Fabricated base frame with AVM pads. 5. Noise level is less than 75 db (A) at a distance of 1 Mtrs as per latest CPCB norms, complete in all respect. Description of Stage - 1 Ins pection: RITES (as 100% of POQty.) ]
| Delivery Location | State | Quantity |
|---|---|---|
| SE/ELEC/HX, SCR | Andhra Pradesh | 1.00 Numbers |
| Total | 1 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5889014.pdf
ATTACHMENT
5889018.pdf
ATTACHMENT
5889015.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .