Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.4 LAccepted-AOC GORUBANDHA MISSAMARI 784 506 | SONITPUR | ASSAM | 784506 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹47.5 L+₹92,021.50 (1.98%)Rejected-Finance 1 SADHANA SOCIETY DEV BAUG DEVBAUG BHAVNAGAR GUJARAT 364001 | BHAVNAGAR | GUJARAT | 364001 | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹47.8 L+₹1.3 L (2.71%)Rejected-Finance GANGA NAGAR NEAR TUSHARCHAKRA MISAMARI 784506 | SONITPUR | ASSAM | 784506 | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹47.8 L+₹1.3 L (2.73%)Rejected-Finance HARIGAON PO NIKAMUL SATRA DIST SONITPUR ASSAM PIN 784001 | SONITPUR | ASSAM | 784001 | L4 | Rejected-Finance NOT BEING LOWEST | |
| 5 | L5₹48.5 L+₹2.0 L (4.23%)Rejected-Finance | L5 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹44.8 L
EMD Value
₹89,600
Closing Date
2 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MISSAMARI
PO-Missamari Dist-Sonitpur Assam
PROVISION OF STORAGE ACCOMMODATION AT AF STN AND SPL REPAIR TO BLDG NO T-41 (BATHROOM BLOCK) OF 13 FD REGT AT REKHAMARI UNDER GE MISSAMARI
2023_MES_605794_1
8383
Open Tender
Civil Works
Item Rate
270 days
GE MISSAMARI
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE MISSAMARI
₹89,600
Yes
21 Dec 2023
26 Jun 2023
4 Aug 2023
26 Jun 2023
2 Aug 2023
10 Jul 2023
Amount
Surface dressing n exc 15cm deep in soft/loose soil complete all as specified as directed.
Excavation in trenches in soft / loose soil not exceeding 1.5 metre wide for foundation etc or for shafts, wells cesspits, manholes etc not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out as directed by the Engineer-in-Charge.
All as per item No 2 above but exc 1.5 but n exc 3.0 m complete all as specified and directed.
M&L excavating in post holes (or similar holes) each in soft/ loose soil n exc 0.5 cum , getting out, returning , filling in and ramming earth or broken rubble mixed with earth around , in layers not exceeding 25 cm , watering , and removing surplas soil to a distance n. exc 50 cm and making good surface complete all as specified and directed.
M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate) in foundation, filling and mass concrete all as specified and as directed.
M&L Cement concrete type (1:4:8) (40 mm graded aggregate ) as in foundations, filling and mass concrete, complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soil, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.
Materials and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundation, footing of column, plinth beam, etc. complete all as specified and as directed.
Materials and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in column, pillars, piers, posts and struts complete all as specified and as directed.
Materials and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, lintel over 1.5m span or bands complete all as specified and as directed.
Materials and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in chajjas and similar works complete all as specified and as directed.
Materials and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in slab supported on walls beams and column in floors, roofs landing,deck slabs and in shelves complete all as specified and as directed.
Use and waste formwork to sides and suffit of suspended slabs such as roof slab, floor slabs, etc. with rough finished square/rectangular surfaces of concrete complete all as specified and as directed.
Use and waste formwork to sides of concrete of foundation, footings, plinth beam, etc. with rough finished square/rectangular surfaces of concrete complete all as specified and as directed.
Use and waste formwork to sides of concrete of columns, pillars, posts with rough finished square/rectangular surfaces of concrete complete all as specified and as directed.
Material & labour for formwork to sides and soffits of concrete of beam, lintels, cantilevers etc. with rough finished square/rectangular surfaces of concrete complete all as specified and as directed.
Material & labour for formwork to as in chajjas with rough finished square/rectangular surfaces of concrete complete all as specified and as directed.
Supply and fixing mild steel TMT bar 10mm dia and over, cut to length , bend to shape required, including cranking, bending, hooking end etc. including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
Supply and fixing mild steel TMT bar 6mm to 8mm dia, cut to length , bend to shape required, including cranking, bending, hooking end etc. including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
Supply and fixing mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, binders, cut to length, bend to shape required, including cranking, bending, hooking end etc. including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
M&L Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed.
Material and labour for 100mm thick PCC 1:4:8 type D2 as in sub base of floor complete all as specified and as directed.
Material and labour for 25mm thick PCC 12:4 type B2 as in sub base of floor/Floor complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified as directed.
M& L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick cement screed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified as directed.
M&L for burnt brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed.
M&L 15mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:6 complete all as directed.
M&L 5mm thick cement plaster on ceiling surfaces without using extra cement finishing fair and even in CM 1:3 including necessary scaffolding complete all as directed.
M & L for 20 mm thick plastering in two layers, 10 mm each in cement mortar 1:4 with water proofing compound (@ 2% by weight of cement or as per manufacture's instructions) on brick/stone walls or concrete surfaces finished even and fair ( upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly under relevant item.
Supply only liquid water proofing compound complete all as specified and directed.
M&L 15mm thick cement plaster on brick or concrete walls finishing fair and even in in cement mortar 1:4 with water proofing compound (@ 2% by weight of cement or as per manufacture's instructions) on roof slab/ concrete surfaces for APP membrane complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly under relevant item
M&L Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer's instructions, complete all as specified and as directed :- (a) Rendering 10mm thick in Cement Mortar 1:4, Plastered Surfaces finished Even and Smooth. The Plastered Surfaces shall be cured properly for 7 Days by Ponding of Water over Roof. (b) Preparing and cleaning of fully dry Plastered Surfaces as per IS:3067-1966. (c) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.30 Litre per Square Metre. (d) Applying a layer of APP based Polymeric Membrance 3.0mm thick (minimum) weighing 3.50 Kilogram per Square Metre (reinforced) with Polyster Non-woven Fabric weighing not less than 160 Grams per Square Metre by Torch application. The Overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction. (e) Applying One Coat of Aluminium Paint @ 0.10 Litre per Square Metre over APP based Polymeric Membrane.
Preparation of new plastered surfaces and applying three coats of white wash on ceiling all as specified and directed.
Material and labour for 2 coats distemper dry over a coat of primer on internal plastered surfacesafter preparation of surfaces complete all as specified and as directed.
M&L applying two coat of cement base paint over a coat of cement base primer on newly plastered surfaces of walls including preparation of surfaces.
M&L Hardcore of gaugeof broken stone n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered andnrammed to a true surface.
M&L for 75 mm thick PCC type C2 (1:3:6) using 20mm graded crushed stone aggregate as in plinth protection , finishing cement concrete surfaces even & smooth without using extra cement.
Material and labour for 100mm thick PCC 1:3:6 type C2 as in foot path complete all as specified and as directed.
M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com• pound, Grade ‘A’, complete all as specified and as directed.
Material and labour for forming Contraction (Dummy)joints 65mm deep x 10mm wide,filled with sealing compound Grade Ä, complete all as specified and as directed.
Materials and labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills,copings, kneelers, apex stones,bed plates etc complete all as specified and as directed.
Supply and fixing mild steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete all as specified and as directed.
S& F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane, complete all as specified and as directed.
Supply and fixing mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps,plate washers and similar small articles conforming to Fe410-0 complete all as specified and as directed.
Supply and fixing mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe410-0 complete all as specified and as directed.
Supply and fixing mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 complete all as specified and as directed.
M&L for MS work for fencing post and struts made from angle iron and flat iron in any section including cutting tops to shape , drilling holes and notching for fixing of wires etc confirming to Fe -290 or Fe -330, complete all as specified and directed.
S&F mild steel screw bolt 11 to 15 mm dia (machine made) with hexagonal head at one end and screwed the other, screwed end to be fitted with one waher and hexagonal nut length not exc05cm long, complete all as specified and directed.
Supply only chain link MS Zink coating 60gsm as per IS 4826 fencing of any mesh size (as desired) and 4mm dia or wire , complete all as specified and as directed.
Fixing only chain link fencing including line wire, any mesh, size and any type of standards rails straining bolt etc including provision of binding wire complete all as specified and directed.
S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
S&F MS round bar for holding chain link fencing,nibs etc with fencing posts.
M&L for preparation of new surfaces of steel or iron surfaces of any description, nexc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Material and labour for preparing surface of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as speci-fied and as directed.
M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M & L for Point wiring with 1.5 Sq mm copper conductor single core FRLSH PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC Concealed conduit and its accessories of suitable size, high grade ISI marked in walls /roof and PVC boxes of suitable size including fixing/grouting sunken/ surface as per site requirement for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for One light point controlled by one, one way switch 5 Amps
All as per item No 57 but One ceiling fan / exhaust fan point controlled by one , one way switch and regulator
All as per item No 57 but One 3 point 5 Amps socket outlets point controlled by one switch on the same board
All as per item No 57 but One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board
All as per item No 57 but for one light point controlled by one, two way switch 5 Amps
All as per item No 57 above but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board.
S & F Switch piano flush type single pole one way 5 Amp, 230 Volts complete all as specified.
S & F Modular switch piano single pole flush type, two way, 6 amps, 230 volts.complete all as specified and directed.
S & F Socket outlet 2 in 1, 3 pin, 5 Amps complete all as specified and directed.
S & F Switch socket combination flush type multipurpose 2/3 pin 5 Amps two in one , 230 volts complete all as specified
S&F Switch socket combination 2 in 1 3 pin, 15 Amp flush type universal.
S&F ceilling rose three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm complete all specified
S & F sheet metal enclosure MCB VTPN 6 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels With provision for 4 Pole MCCB 100 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed.Make- L&T, Cat No: DBVTL006DD and equivalent in Legrand and Indo Asian.
S & F MCCB 4 Pole 415 volts 100 Amps with thermal - magnetic release with breaking capacity 36 KA and with adjustable overload setting complete all as specified. Type- DN2-250D Model:-CM92108OOL1OG, Make:- L&T and equivalent in Legrand and Indo Asian.
S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified. Make:- Indo Asian and equivalent in Legrand and Schnider
S & F MCB Double Pole 32 Amps 240/415 Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed.Make- L&T, Cat No: BB20320C or equivalent in Schinder/ Legrand.
S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed. Make -L&T,Model No-BB10060C,BB10100C,BB10160C and equivalent in Schinder/ Legrand.
S & F wall mounted LED 18 watts, box type light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements and connection from ceiling rose to fitting for LED tube 4'' x 18 watts complete including dismantling the existing unserviceable fitting, complete all as specified and as directed.
S & F Ultra bright LED T8 Tubelight 18 watts (single side connection) with very high efficacy with built in driver with metal Heat sink suited for installation in existing tubelight G13 lamp holders to give glare free light with necessary wiring and removal old existing unsv tube from fitting including taking up/ down old unserviceable Tube, disconnecting Choke, Starter etc from the Light Fitting complete all as specified and as directed.
S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 20 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. Make- Havells,Model No - SLE UL 15W IP66(LXN) Or Equivalent in CROMPTON and BAJAJ all as specified and directed.
M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as directed.
Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified.
Supply & Laying LT heavy duty UG Cable of size 35 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed. Make :- Polycab and equivalent in Havells and KEI
S & F GI Tubing light grade of size 50mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed.
Supply and Installation, commissioning of wall mounting air cooled split type unit air conditioner electric driven single phase indoor unit and outdoor unit with cordless remote control unit and with in built airioniser and plasma filter for better indoor air quality cutting ,brazing and connecting the copper pipe of size 1/2 inch and 1/4 inch size of pipe and making holes as for passing of copper pipes and electric cables and pressure testing with nitrogen and freon gas vacumising the system and charging the Non CFC refrigerent and testing the complete system for smooth functioning of split AC up to satisfactioning, minimum 5 star rating, confirming to IS-1391 Para II 1992 herimatically sealed air compressor working with Non CFC refrigerent suitable for wall mounting 2.0 Ton complete all as specified and directed. Make-BLUESTAR/SAMSUNG/VOLTAS
Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type wall mounted and designed for input variation between 130 volts to 300 volts with out put voltage stablized at 230 volts with accuracy of + 2.5% and capacity 5 KVA suitable for AC complete all as specified. MAKE- V guard/Microtek/Luminious.
S&F heavy duty exhaust fan 300 mm sweep MS Body, 3 wing 1400 rpm, single phase 240volts copper wounds complete with all accessories as louvers shutters etc incl making connection through 3 core PVC copper wire run through flexible pipe. Single phase type Make : Orient or Equivalent in USHA/ Havells.
Supply and fixing 5 star rated BLDC ceiling fans (without remote) AC 230 Volts single phase 1200 mm sweep complete with all accessories including MS Hook, Nuts, Bolts and washer for hanging arrangement complete all as specified and directed. Make: Usha ,Model- TECHNO AIR 5 Star /HAVELLS/Crompton
M&L for replacement Sub main wiring 2 x 6 Sqmm multi-strand FRLSH PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of FRLSH PVC insulated multi-strand copper conductor of size 6.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
Supply and fixing for single pole and neutral enclosure with a two pin and earth plug and socket complete with on one single pole MCB 20 Amp, 240 volts.Make:- L&T/Havells/Legrand
Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item.
Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I.
Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises.
Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 .
M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement
Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames)
S & F Solid pvc Door Frame of size 100mmx45 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc.
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed.
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F in repairs 10 Ltrs. Capacity PVC flusing cistern low level slimline or equivalen make / model with all accessories complete all as specified and directed.
Supply & Fix in repairs Vitreous EWC size 580 x 440 mm white with includig 'P' or 'S' traps complete all as specified and directed.
S&F in repairs Vitreous China squatting pan "Orissa" patern size 630x450mm white with integral foot rest (Excluding flushing cistern & flush pipe) complete all as specified and directed.
S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.
S & F PVC connection 15 mm bore 450 mm long complete all as specified and directed.
S&F in repairs brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
Taking down rain water pipes inculding all fittings any size and pattern complete all as specified and directed.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.
S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed.
Supply & fix 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.
S&F 15mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.
All as per item No 115 here in before but 20mm dia complete all as specified and directed.
S & F in repairs 15mm bore angular/ concealed stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S&F in repairs 15mm bore angular stop cock with flange screwed down high pressure with crutch or butter fly handdle screwed both end for iron pipe complete all as specified and directed.
S&F in repairs 15mm bore Two in one tap with flange screwed down high pressure with crutch or butter fly handdle screwed both end for iron pipe complete all as specified and directed.
S & F in repairs cromimum plated helth faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long Easy Flex tube in chrome finish complete all as specified and directed.
S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws,vitreous China white, ap proximate size 160x 160x90 complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge, thickness in roof covering.
S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
M&L preparation of new plastered surfaces & providing two coats of OBD over a coat of primer complete all as specified and directed.
M&L for preparing old surfaces of walls and applying one coat of oil bound distemper complete all as specified.
M&L for Preparation old decorated plastered surfaces of wall and applying two coat of cement base paint all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F Grating doom 100 mm dia. with waste hole of CP (minimum weight 40 gms), complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) floor trap 100 mm plain with grating including jointing with solvent cement complete all as specified and directed.
Taking down carefully existing unserviceable copper/ aluminium point wiring (light,call bell, two way, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators,bracket light fittings and making good to the disturbed surface complete all as specified and directed.
Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed.
Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles complete all as specified and directed.
S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/squareblocks complete all as specified and directed.
S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified.Make-Make- Havells, Cat No: LHLDEUEBML8Z010 or equivalent in CG or Polycab.
S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar , 4 way double door openable complete all as specified and directed.
S & F MCB Double Pole 20 Amps 240/415 Volt, confirms to IS/IEC 60898 Braeking Capacity of 10 kA, C-curve, complete all as specified and directed.Make- L&T, Cat No: BB20320B or equivalent in Schinder/ Legrand.
S & F MCB SP, 240 volts, 6A Amps 50 Hz ,confirms to IS/IEC 60898 Braeking Capacity of 10 kA, C-curve, complete all as specified and directed. Make -L&T,Model No-BB10060B/Schinder/ Legrand.
Supply & Laying LT UG XLPE cable of size 2 core x 10 sq mm laid in trenches/ floors/ on wall/ service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal/ cable gland as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable all as specified and directed.
M/S Krishna Construction Co.
M/S K.K.TRADERS
Markson
shree kamakhya traders
BEE KAAY TRADERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .