PROVISION OF GENTS AND LADIES TOILET AND FLOORING IN MES COMPLEX AT MALKAPURAM VISAKHAPATNAM UNDER AGE I CG VIZAG

Amount

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and as directed.

M&L for excavation in trenches, not exc 1.5 m wide and 1.5 m in depth in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n.exc 50 m and depositing where directed at a level in n. exc above the starting point complete all as specified and as directed.

M & L for Plain Cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Use and waste of form work to side of concrete foundation including rafts, footings, foundation beams, base of columns etc., for rough finished surfaces of conrete flat complete all as specified and as directed.

Formwork to sides of squar ,rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of conrete flat complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; and similar work not exc 200 mm thick; rough finished surfaces of concrete flat complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ,rough finished surfaces of concrete flat complete all as specified and as directed.

M & L for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M & L for Mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed

M & L for Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M & L for Reinforced Cement Concrete Type M-30 (Using 20mm graded granite stone aggregate) in Footings, Foundations beams, bases for columns etc. complete all as specified and as directed.

M & L for Reinforced Cement Concrete Type M-30 (Using 20mm graded granite stone aggregate) in Columns, Pillars, piers, posts and struts complete all as specified and as directed.

M & L for Reinforced Cement Concrete Type M-30 (Using 20mm graded granite stone aggregate) in Beams, Cantilever, lintels over 1.5 mtr. complete all as specified and as directed.

M & L for Reinforced Cement Concrete Type M-30 (Using 20mm graded granite stone aggregate) in slabs supported on walls, beams and columns in floors, roofs landings,deck slabs and in shelves etc. complete all as specified and as directed.

M&L for fly ash brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed.

M & L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including provision of 2 Nos 8mm dia TMT bars at every fourth course complete all as specified and as directed .

M&L 25 mm thick damp proof course to horizontal or vertical surfaces incl necessary form work in cement concrete 1:2:4, type B-0 complete all as specified and as directed .

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement complete all as specified and as directed .

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for Rendering in CM 1:4, 5 mm over CM 1:6 10mm, external of brick work or concrete surfaces , finished even and smooth without using extra cement including mixing with WPC all as per manufacturers instructions complete all as specified and as directed. (Note :- Liquid WPC will be measured and paid separately)

Preparing newly plastered surface and applying two coats of cement based paint over a coat of primer complete all as specified and as directed

Supply only integral water proofing compound complete all as specified and as directed.

M& L for rendering 5 mm thick on ceiling surface CM 1:3 to be finished even and smooth without using extra cement complete all as specified and as directed

M & L for preparation of new plastered surfaces on ceilings and applying three coats of white wash

M&L Anti Termite Treatment of the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M&L for Anti Termite Treatment of the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub-structure in contact with backfill to be measured) complete all as specified and as directed.

M&L for Anti Termite Treatment of the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M& L for hardcore of gauge not exceeding 63mm of broken stone, deposited , spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true suirface complete all as specified and as directed.

M & L for Plain cement concrete Type C1 [Nominal Mix] 1:3:6 using 20mm graded stone aggregate cast in situ in lintels up to 1.5m span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded aggregate) 100 mm thick as in sub base of flooring/hardstanding complete all as specified and as directed.

M&L for 40 mm thick Cement concrete type B-1, (1:2:4) (20mm graded aggregate) as in flooring surface finished even and smooth without using extra cement all as specified and directed.

S & F glass dividing strips,38 mm wide & 3mm thick inserted in position conform to design all as specified and as directed.

M & L for Non Skid Coloured ceramic tiles 7 to 8 mm mm thick (Square / Rectangular) area of each tile exceeding 0.06 Sq. M but not exceeding 0.11 Sq. M, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed. Make : Spartek / Johnson / Kajaria / Somany / Orient / Cera

M & L for Glazed coloured and cereamic tiles in vertical surfaces 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10 mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces complete all as specified and as directed. Make :Spartek / Johnson / Kajaria / Somany / Orient / Cera

M & L for Couloured chequered tiles 300mm x 300mm x 20 mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished, including provision of screed bed 15 mm thick in cement mortar 1:4 complete all as specified and as directed. Make : Eurocon/ Duracrete/ Ultra/ Mehtab

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per Specification & Drawing shown on Serial Page No. 160 of MES Schedule Part - II complete all as specified and as directed.

S&F Factory made Solid Panel PVC Door Shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in frame at site as per specification & drawing shown on Serial Page No. 157 of MES Schedule Part - II complete all as specified and as directed.

S&F Butt hinges of 100 mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm complete all as specified and as directed.

S&F 250 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F 15 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceilling or laid in floors in short lengths complete all as specified and as directed.

S&F 20 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceilling or laid in floors in short lengths complete all as specified and as directed.

S&F stop valve 15 mm, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and as directed. Make: Jaguar/Zoloto / Gem / Soma / Parco / Dripless / Seico

S&F stop valve 20 mm, cast copper alloy screwed down high pressure with crutch or butterfly handle scewed both ends for iron pipe or for unions complete all as specified and as directed.

S&F stainless steel towel rail 600 mm long fixed with & incl chromium plated brass screws and wooden/plastic cleats ( minimum wt 190 gms).complete all as specified and as directed.

S&F brass chromium plated toilet paper holder with flap complete all as specified and as directed.

S&F vitreous china wash hand basin white of size 500 x 450mm including brackets, pillar taps, waste pipe, PVC connection, stop valve etc complete all as specified and as directed. Make : Jaquar & Company Pvt Ltd / Prayag / Kohler / Roca / Cera( First quality)/ Hindware (Italian collection) /Parryware(superfine) / Johnson pedder.

S&F brass chromium plated health faucets 15mm bore with 1m long metallic expandable tube and hook complete all as specified and as directed. Make: Jaquar / Johnson / Plumber / Dripless

S&F Vitreous China Wash Down EWC, White, including 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe with PVC connection and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed. Make : Jaquar & Company Pvt Ltd / Prayag / Kohler / Roca / Cera( First quality)/ Hindware (Italian collection) /Parryware(superfine) / Johnson pedder.

S&F vitreous china bowl urinal flat back of size 465x355x265mm white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in CM (1:2) securing urinals to wall with 60mm long brass screws including flush pipe & waste pipe complete all as specified and as directed. Make : Jaquar & Company Pvt Ltd / Prayag / Kohler / Roca / Cera( First quality)/ Hindware (Italian collection) /Parryware(superfine) / Johnson pedder.

S&F Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs. complete all as specified and as directed. Make: M/s. Sintex/ Polycon//Oriplast/Jindal

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) 110 mm WC connector with lip ring complete all as specified and as directed.

S&F PVC (SWR) 'P’ trap 110 mm complete all as specified and as directed.

S&F 110 mm dia (SWR) bend any radius complete all as specified and as directed..

S&F PVC (SWR) branch piece, single (single Y) equal or unequal of 110mm bore with oval acess doors complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F 110mm PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M & L for PCC 1:4:8 type D-2 (40mm gradded aggergate) bed to drain pipe including packing under and hanching against side after they are laid and tested for 150mm dia pipe complete all as specified and as directed.

M & L for PCC precast solid block masonry 1:3:6 type C-1 (20mm graded aggregate built in CM 1:6) complete all as specified and as directed.

M & L for plain cement concrete, type B1, 1:2:4 (Using 20mm graded granite stone aggregate) cast in situ in bed blocks, copings and the like including weathering, solightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and as directed

M & L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded aggregate) in surface channels and drains complete all as specified and as directed.

M & L for Precast cement concrete type B1, 1:2:4 (Using 20 mm graded granite aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed

Extra for forming fair finished drain or channel 50 cm inner girth in cement conc,using extra cement,including forms,moulds,mitred / stopped ends complete all as specified and as directed

M&L for Light shade Vitrified Ceramic tiles 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36sqm and not exceeding 0.42 Sqm , in floors / Skirting / Dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles colour over 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finishes complete all as specified and as directed Make: Kajaria Ceramics Ltd/Asian Granito India Ltd/Somany eramics Limited/Varma Granito Pvt. Ltd /H&R Johnson India/Nitco/ Orient Bell Ltd

M&L 18 -20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

S&F 18mm Pre-laminated particle board, interior grade, prelaminated both side with decorative face veneers on both faces, fixed in shelves, Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work including necessary builders hardware all as specified and directed. Make:Kitply/Century/Archidply/Novapan/Ecoboard/Decoboard/Green Ply/Anchor

M & L for point wiring on wall and surface wiring on ceiling/roof/truss/false ceiling with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized Modular sunken boxes made out of MS sheet of standard thickness with earth dolly and crown plate and cover plate for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with captive MS screw including PVC-FRLS insulated and unsheathed copper multi-stranded copper conductor cable FRLS of size 1.5 Sqmm, PVC insulated connected to earth dolly, 1100 volts grade for continuous earthing all as specified and directed for the following:- (a) For one light/ fan point controlled by one switch.

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body for surface type, bakelite 65x50mm three terminal complete all as specified and as directed. Make : Anchor/Cona/Havells

S&F switch piano flush type single pole one way 5 amps, 230V AC, complete all as specified and as directed. Make: Anchor/Cona/Havells

M&L for energy saver LED Bright batten light fitting 18-22 watt, 230 Volts Integrated design including required fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting old unserviceable bracket with sketch fitting all as and as directed. Make :Philips/Wipro/Bajaj

M&L for energy saver LED mirror light fitting 10 watt, 230 Volts Integrated design including required fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting old unserviceable bracket with sketch fitting complete all all as specified and as directed. Make :Philips/Wipro/Bajaj

S&F pressed sheet metal enclosure (MCB DB), 4 way SPN with 200 Amps rated bus bar, double door type, 240 volts complete all all as specified and as directed. Make : Legrand or equivalent make in list of makes specified in PS.

S&F MCB SPN 6 to 32 amp 240 volts, "C" series 10 KA breaking capacity & connection complete all as specified and as directed. Make : Legrand or equivalent make in list of makes specified in PS.

S&F MCB single pole 6 to 32 amp 240 volts, "B" series 10 KA breaking capacity & connection complete all as specified and as directed. Make : Legrand or equivalent make in list of makes specified in PS.

S & F Heavy duty metal body Exhaust fan of 200 mm sweep having turbo force 900 RPM, 230/240 volt including metal body mounting ring and louvers and shutters with clamp sets, nuts and bolts suitable for exhaust fan 300mm sweep including making circular hole in wall and making good to its disturbed surface, connection cable as per conductor of size 1.5 sq mm, 3 core, PVC insulated complete all as specified and as directed. Make: Havells model Celso New or equivalent in M/s. Crompton Greaves / M/s. Bajaj

M&L Sub main wiring with two single core PVC-FRLS insulated unsheathed multistranded copper conductor cable of size 4 sqmm drawn in rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 25 mm including all conduit fittings like bend, elbow ,with 2.5 Sqmm PVC-FRLS insulated unsheathed multistranded copper conductor as a continuous earth wire complete all as specified and as directed. Note : Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. MAKE : FINOLEX/ POLYCAB/KEI

S&F building security light fitting 20 watt LED with pressure die cast housing IP 65 suitable for secondary road/building power consumption should not be more than 25 watt and power factor should not be less than .90 complete all as per specified and directed. Make: Philips Cat Part No. BRP022 LED 20 CWMR 51 PSUGR equivalent make in list of makes specified in PS.

Supply, lay, testing and commissioning XLPE insulated, PVC sheathed (heavy duty), galvanised steel strip or wire armoured, electric power cable with aluminium conductor, 1100 Volts grade of size 2 core 10 Sq.mm. drawn through cable tray complete all as specified and as directed . Make : FORT GLOSTER,/CCI/ ASIAN/ UNISTAR /POLYCAB [ ALL ARE ISI MARKED ]

N Sydeswara Rao

ANJALI ENTERPRISES

VIJAY VINAYAKA INFRA

K K INFRA