REPAIR/REPLACEMENT OF GARDEN LIGHTS AND CONNECTED ACCESSORIES FOR 2ND AND 3RD AVENUE, CHILDREN PARK AT NORA LAWN LIGHT OF TRAINING SCHOOL AT NAVAL BASE KOCHI.

Supply and fixing in replacement of new generation IP 65 LED post top 25 Watts Warm/white energy saving, environmentally friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, clear cover bright illumination/opal cover offers as per requirement, including cable/wire connection from Junction box to light complete all as specified and directed. (colour of light warm or white will be ordered after as per site requirement by Engr-In-Charge) Note :Earth work/pipe/foundation/GI pole measured and paid separately

Supply and fixing in replacement of new generation IP 65 LED post top 40/45 Watts energy saving, environmentally friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, clear cover bright illumination, including cable/wire connection from Junction box to light complete all as specified and directed . (Colour of light warm or white will be ordered by after as per site requirement by Engr-In-Charge) Note :Earth work/pipe/foundation/GI pipe measured and paid separately

Supply and Laying in replacement of UG cable XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 3.5 core 50 Sqmm laid in trench /duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed

Supply and Laying in replacement of UG cable XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 4 core 16 Sqmm laid in trench /duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

Supply and Laying in replacement of UG cable XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 4 core 10 Sqmm laid in trench /duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre depth and getting out in soft / loose soil for laying of cable complete all as specified and directed.

Material and labour for common burnt clay building bricks sub-class 'B' designation of size 230X115X75mm complete all as specified and directed

Material and labour for filling riddle sand cushioning for under ground cables complete all as specified and directed. Note :- Punned thickness shall be measured and paid for the measurent purpose only

Returning and filling of soil including spreading levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level, not exceeding 1.5 metre above the starting point complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete in post hole complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in copping on wall including weathering, slightly rounded or chemfered angles or throating as directed complete all as specified.

Supply and lay in replacement of trenches/fixed on walls/poles GI tubing medium grade with all fittings of 40 mm bore complete all as specified and directed.

Supply and lay in trenches/fixed on walls/poles GI tubing medium grade with all fittings of 50 mm bore complete all as specified and directed.

Cutting existing concrete/metal/ bituminous road/PCC hard standing / interlock tile or tile walk way any type n.exc 45 cm width and n.exc 30 cm in depth in hard strata and making good disturbed surfaces, as per the existing with cold mix bituminous material/ PCC(1:4:8) type D2 using 40mm graded stone aggregate 150 mm thick over returning filling, watering ,ramming in layers ,disposal of surplus material to a distance n.exc 50 m, complete all as specified and as directed (GI pipe will be measured and paid separately)

Supply and fix junction box made of hot press moulded SMC junction boxes of size 270x225x135mm, GSJP-2520 including one MCB SP 6 Amps, cable connector and suitable size clamps fixing for pole/in pcc foundation and including taking down old unserviceable fitting complete

Supply and fix junction box made of hot press moulded SMC junction boxes of size 140x140x95mm, GSJB-1414 including one MCB SP 6 Amps, including terminal for 3phase cable connector and suitable size clamps fixing for pole/in pcc foundation and including taking down old unserviceable fitting complete

Supply and fixing wiring with three core of 1.5 Sqmm of PVC (FR) insulated multistranded copper conductor sheathed cable of 1.5 sqmm drawing through PVC conduits with continuous earth wire PVC (FR) insulated cable of size 1.5 sqmm connected to earth including all conduit accessories. Note :- Three run of sheathed cable and one run of PVC Conduit pipe measured as one unit.

Supply and lay High density poly ethylene pipes (HDPE) 40mm dia of pressure rating 6 kgf/cm2 laying in trench and fixed complete to walls, ceilings or in floors etc. all as specified and directed

Supply and fix in replacement of 90w LED street light with die cast aluminium housing and IP lense with IK08 ; THD0.95 ; CCT :5700K . Spd OF 4 KV+10KV ;

Supply and fix in replacement of 100W LED Flood Light output greater than 110 Lum/W with IP66 Protection .The beam angle should be of 60 Degree for aiming and achiving the desired Lux levels. The LED's shall be of High power LED using OSRAM/CREE/BRIDGELUX with a power factor greater than 0.98 at full load.The driver shall be of BIS potted one with SPD of 4KV +10KV ;The Luminaire shall made of Aluminium pressure die cast powder coated for corrotion resistance and made with diffucer of Toughened Glass. The Luminaire shall be single housing only for assymentrical aiming and easy maintance . the brand name should be embosed on product . TDS , LM79 & L70B30 @ 50000 hours.certificates shall be furnished.

Supply and fix in replacement of 200W LED Flood Light output greater than 110 Lm/W with IP66 Protection .The beam angle should be of 60 Degree for aiming and achieving the desired Lux levels. The LED's shall be of High power LED using OSRAM/CREE/BRIDGELUX with a power factor greater than 0.98 at full load. The driver shall be of BIS potted one with SPD of 4KV +10KV ;The Luminaire shall made of Aluminium pressure die cast powder coated for corrotion resistance and made with diffucer of Toughened Glass. The Luminaire shall be single housing only for asymmetrical aiming and easy maintance . the brand name should be embosed on product .

Supply and fixing in replacement of LED Flood Light 50W--COOL GREEN LED flood light with cast aluminium housing, toughened glass cover, high efficient LED, IP65/66, 10KV SPD, >100 lm/watt, and wired with all accessories complete with base plate and foundation with enamel white paint bolts and nuts including fixing top of pole angle iron frame complete all as specified and directed by Engg-in-Charge.

Supply and fixing in replacement of LED Flood Light 50W-LED flood light with cast aluminium housing, toughened glass cover, high efficient LED, IP65/66, 10KV SPD, >100 lm/watt, and wired with all accessories complete with base plate and foundation with enamel white paint bolts and nuts including fixing top of pole angle iron frame complete all as specified and directed by Engg-in-Charge.

Materiala and labour for earthing complete with galvanized iron or steel earth plate electrode 60cmx60cmx 6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to galvanized iron strip 32x6 mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work and connecting the earthing to an earthing test point /transformer neutral/body/ Lt panel etc. and testing on completion, complete all as specified and directed

Supply and fixing in replacement of 3 Mtr Mat black decorative Polyurethane painted pole made of galvanised steel tubing with bottom dia 114mm, top dia 60mm with height swaged at 2000 mm with total length 3 metres, die cast base of dia 340mm, decorative casting rings and service window at bottom for MCB and terminal block, fixing arrangement including erecting of pole, necessary PCC foundation and earth work, nut, bolts etc as per OEM Drawings attached complete all as specified and directed.

Supply and fixing in replacement of TETRIS 9W LED Bollard in rectangular shaped victorian design with opal acrylic diffuser and IP 65 protection 9w led ww 3000k along with wiring accessories including foundation with enamel white paint all as specified as directed

Please Enable Macros to View BoQ information