SAC

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle)

Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge

Filling with Gravel , including cost of Gravel, seinourage charges and conveyance to site, filling charges, watering, tamping and rammming and all labour charges and operational charges complete as directed by the Departmental officers.

Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., to site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of overheads & contractors profit etc., complete for finished item of work in foundation and basement. (APSS No. 601 & 615).

Brick Masonary for panel walls in super structure with cement mortar (1:6) prop: (Cement:Sand) using second class bricks from approved source having minimum crushing strength of 40kg/sq cm including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges constructing masonary, lift chages curing etc., complete for finished item of works and as directed by the Engineer-in-charge of work for finished item of work for Super structure.(SS No.501&504 of APSS)

Reinforced Masonry for partition walls (100 mm thick) in CM (1:6) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., but excluding cost of steel and its fabrication charges complete for finished item of work

Supply and installation of High Pressure Laminate (HPL) toilet cubicles using 12mm thick panels, made from phenolic resins under high pressure. These panels have a density greater than 1.40 kg/cm³, water absorption below 0.60–0.8%, and are resistant to heat, bacteria, chemicals, scratches, and impacts, meeting IS-2046 and EN438 standards. Each cubicle will be 1200mm (W) x 1500mm (D) x 2000mm (H) with door size of 600mm (W) x 1800mm (H). Urinal Modesty Panels (UMP’s) will also be installed, each measuring 500mm (W) x 900mm (H). SS/Nylon hardware accessories include auto return hinges (3 per door), indicator lock, door knob, coat hook, adjustable legs, and anodized aluminum U, L, H profiles with a top rail. Installation includes adjustable feet with 150mm floor clearance and secure fixing using aluminum U-channels, top rails, and wall fixings.

Plastering 12mm thick for internal walls using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) for G.F FLOOR

Plastering with CM 2 coats for external wall, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904

Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work BLD-CSTN 10-25 P.No.71

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)

Dadooing to walls withglazed red or white full body ceramic wall tiles of Size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Painting to new walls with 2 coats of acrylic emulsion paint weather proof water based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound) content lessthan 50grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 2 Coats.

Providing & fixing 30 mm thick solidpanel PVC door shutter consisting of frame madeout of 19guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mmthick heat moulded PVC “C” channel ofsize of 30 x 50 mmforming stiles, 5mmthick75mmwidePVCsheetfortop, lock & bottom rail on either side20mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm (+/-) (5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded/sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5mm thick PVC strip of 20 mm width stuck on the interior side of the Channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification.

SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT): Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-in-charge.

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of - 0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work. Ventilators: Fixed louvers 4'-0" x 2'-0" (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour as directed by Engineer-in-charge.

Supplying & Fixing Orissa Pan White glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440 mm duly providing constructing Brick masonry seat using 2nd class bricks, CC Squatting plate in P.C.C 1:2:4, S&F PVC Low level system with internal components & short bend: 10 Litres capacity Single Flush, S&F of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 and S&F 15 mm nominal size PVC connection with brass union nut C.P coated including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work.

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated complete including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Double C.P. Pillar cock

Supply & Fixing of 12.7 mm dia NP push cock Ist quality Jaquar Continental series, Chrome Finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Angular stopcock with wall flange Jaquar Continental series, Chrome finish with 7 years warranty. (Make: Jaquar, Model: 5053) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Ring Round Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AQN-CHR-7721 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 590 x 375 x 390 mm of Ist quality including cost and conveyance of all materials, overheads and contractor's profit etc. complete for finished item of work in all respects.

Supplying and fixingTV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, etc. overhead & contractor's profit complete for finished item of work in all floors as directed by Engineer-in- charge.

Supplying, fixing and testing PVC soil, waste and vent pipes (SWR) confirming to IS13592 :1990, type B with Solvent Cement joint inclusive of all necessary specials like bends, tees, offsets, door ends, junctions, cowls, etc., laid under floor/fixed on walls,and in pipe shafts etc., complete.The quoted rate should include necessary MS supports like hanger supports, grip bolts and clamps etc., including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge

a) PVC soil, waste and vent pipes 160mm dia - 6Kg/Sq cm

b) PVC soil, waste and vent pipes 110mm dia - 6Kg/Sq cm

Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practicefor nominal dia 75 mm (3") and grating size 100 mm dia of weight not less than 4.0 Kgs including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying, fixing, testing and commissionig of approved make PVC vent cowl with necessary accessories etc., complete

Supplying & fixing 150 mm x 100 mm SWG gully trapsconforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Supplying, installing, testing and commissionig of R.C.C NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe with all leads and lifts, making necessary connections as required etc., complete. (Provision for road crossings

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size-

b) 25 mm dia (Screwed ends)

c) 32 mm dia (Screwed ends)

d) 40 mm dia (Screwed ends)

Supplying, installing, testing and commissioning CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU-G/Honeywel

Supplying and lying P.C.C support blocks of 1:2:4 concrete mix of sizes as given below for pipe supports on the terrace complete.

Providing water proofing Brick Bat cement Concrete (1:4:8) proportation niminal mix (Cement:fine aggregate :Brick )using broken 40mm country t Bricks including cost and conveyance of all materials like cement ,sand,Bricks,Water,Water Proofing Chemical 250 Ml per 50kg of cement bag etc to site ,including seigniorage charges,sales & other taxes on all material and including all charges ,sales & other taxes on all material and including all charges for Hand mixing ,laying concrete finishing top surface to the required level curing in toilet area filling etc.,complete for finished item of work (APSS No.402 & 701

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.for Rigid PVC rain water pipes conforming to IS 13592 - 1992 (Type A) with all fittings like shoes, bends fixed in the pipe shafts (ducts) with suitable supports etc., complete.(for RWP & balcony drainage

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tank

Weather proof Junction box Supply, fabrication, installation of Weather proof Junction box with suitable terminals, MCB , connections as per site conditions MCCB MAKE: L&T ( DSINE), ABB(TMAX)

Supply and laying of the following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 1554-1, including laying in existing cable trench as per specifications etc complete as required. [Makes: Polycab / RPG / Finolex / Havells

3 Core 4 Sqmm Copper cable

3 Core 2.5 Sqmm Copper cable

3 Core 1.5 Sqmm Copper cable

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI

3 Core 4 Sqmm Copper cable

3 Core 2.5 Sqmm Copper cable

3 Core 1.5 Sqmm Copper cable

Supply and making end termination with heavy Aluminum lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc., of following size: Makes:Dowels/Comet/SMI

3 Core 4 Sqmm Copper cable

3 Core 2.5 Sqmm Copper cable

3 Core 1.5 Sqmm Copper cable

Supply and installation of ESE Air Terminal of external wide area of protection system based on proactive Early Steamer Emission (ESE) Technology manufactured in accordance with NFC 17-102:2011, is made of high-quality, non corrosive and weather resistant XL-304 Stainless Steel Having triggering advance t= 30μs, Protection Radius ranging from 48 Meters in Level-I to 71 Meters in Level-IV when installed on a 5Meters Mast. ESE terminal is capable to withstand Current Impulses of 40kA (5 Shots of 8/20μs wave shape) and having capturing rod dia of 25mm. Makes : As per list of recommended brands. Make INE/ NIMBUS/ FOREND

Installation and commissioning of INE /NIMBUS/FOREND or equivalent advanced lighting protection systems which includes Laying of CC Bed.Installtion of lighting Rod, Counter, earth electrodes, Laying of down conductor Interconnection between the electrodes . Termination of down conductor to earth bus etc complete.

Supply of 6 Digit Electronic/Mechanical counter Makes : As per list of recommended brands

Supply and Installation of IEC 62561-7 compliant Eco-friendly, Maintenance free, anti-corrosive, leadfree, super conductive, mineral based high-grade earthing compound, To enhance soil conductivity. With resistance <0.12 ohms-meter, Sulphur Free, Should be tested as per IEC-62561-7 for resistance Toxic Elements, Leachable elements etc. 25 Kg Bag, Bentonite Moisture Retaining Powder 30 Kg Bag, Concrete Earth Pit of Dimensions: Width: 320 mm, Length: 320 mm, Height: 192mm, Weight 30 Kgs, Load bearing Capacity: 5000 Kgs Makes : As per list of recommended brands.

Supply and laying of down conductor of 1x70sqmm single core PVC insulated unarmoured copper conductor cable for voltage up to 1100V as per IS 694/1990 of ISI mark. Makes: Polycab / Havells / RPG / RR Kabel

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in brick masonry (CM 1:3) Chamber of 400mmx 400m x 400mm with suitable cast iron cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 0.3mtr. length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including brick masonry (CM 1:3) Chamber of size 400m x 400m x 400mm covered with suitable cast iron Slab filling with salt and charcoal giving earth connection from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).

Providing independent CI earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

32 x 6mm Copper strip

Supply ,erection ,testing and commissioning of following G.I. Strip/G.I. wire on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required.

25x3mm GI strip

Supply,erection and commisioning of cable route marker with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) of size 60cm x 60cm at the bottom and 50cm x 50cm at the top with a thickness of 10 cm including inscription duly engraved as required.

Supply, fabricating , installing structural steel supports for fixing of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting for HT yard structure and exhaust pipe supports in DG set.

Supply and laying of 100 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors for entry of cable at road crossing and central wedge of road at a depth of 900.00 mm wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete.

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete.

Earth work excacvation including all soils for trench,

Supply and laying of following size ISI …….. outer dia medium grade with IS:9537 part 3 FRLS regid PVC pipe,concealed in wall with PVC deep Junction Boxes confirms to IS : 3419, PVC Bends including required accessories complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/ AKG/Beljin

25mm (1.80 mm thickness)

32mm (2.10 mm thickness)

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box and front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Primary Light Point)

Secondary Light Point Supply and fixing of ceiling rose for secondary light point (conduit and wire is extra) complete

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box a nd front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Fan Point)

Supply and fixing of 1 no. 6A 3 pin modular socket with 1 no. 6A modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Separate switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Supply and Fixing of 16A 2Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ] Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Supply and fixing of 20A SP Metallic Plug and Socket with provision for 1 No of SP/TP MCB for control in SS enclosure as per IS 8623; IS 13032; IEC 61439-3 Makes: As per list of recommended brands as category I.

Supply and run of 1 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 1 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 56/0.3mm (4.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 1 of 56/0.3mm (4.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 4 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and fixing of distribution board Protection suitable for IP43, S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager - Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way SPN Distribution board 40A DP MCB 10KA 1 Nos as incomer and 8Nos 6-32A SP MCB's 10KA as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 4way TPN Distribution board 63A 4P MCB 1Nos as incomer and 12Nos 6-32A SP MCB's as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way TPN Distribution board 63A 4P MCB 1Nos as incomer and 24Nos 6-32A SP MCB's as outgoers

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I. a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight.

Supply and fixing of 18W heavy duty LED Down lighter, suitable for Recessed mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 120 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc.,complete with earth connection and not less than two years warranty. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArrt/ Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight

Supply ,installation testing comissioning of 12' (300mm) Light duty exhaust fan with wire guard Completely nuts and bolts and 23/0060 Twin core wire including all labour charges etc.,complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orienthill air.

Provision for Seignorage charges

Provision Towards merit 2%

Provision Towards DMF 30%

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item