PROVIDING FIXING AND ERECTION OF HOARDINGS WITH BANNERS AT DIFFERENT LOCATIONS INCLUDING SUPPLY PLACING OPERATION OF HOT AND COLD WATER DISPENSERS AND WATER TANKS AT DIFFERENT ESTABLISHED CONTROL ROOMS WITH OTHER ALLIED WORKS UNDER THE AMBIT OF SUB D

Development of water kiosk by means of providing/ supply and installation of water purifier and storage cum chiller/ heater with dispensing mechanism of following specifications to be approved by the Engineer In-charge. This item also includes providing and fixing of necessary fittings/ accessories/ pipe specials required to make the water purifier/dispenser fully functional in all respects and also connecting it to the water mains/storage tank at the place of installation. It includes the charges for the fitter/plumber/labour etc. required for completion of job. a)Specifications for R.O water purifier: Make: ISI Marked Reputed Make to be approved by Engineer In-Charge. Filtration rate: Minimum 40 litres per hour. Purification stages: RO+UV+UF+TDS Controller. Fully automatic operation with auto on/off. A pre-filter/bowl for silt/impurity collection is to be installed in the pipe prior to purifier. b)Specifications for storage cum Hot and Cold Stainless Steel Dispenser: Make: ISI Marked Reputed Make to be approved by Engineer In-charge. Total storage capacity=80 litres No of faucets=Minimum 2 No. Cooling technology: Compressor type. Storage tank material: stainless steel. Body material: Stainless Steel. The above items are inclusive of all carriages, taxes, levies.

Providing/supply and fixing of 2 KVA automatic voltage stabilizer of reputed make ISI Marked to be approved by the Engineer In-charge including all the necessary wires, switches/sockets to connect the purifier/cooler/stabilizer to the power outlets. It includes the charges for the electrician required for completion of job. The above items are inclusive of all carriages, taxes, levies.

Providing and installation of Hot, Cold and Normal Standing Water Dispenser of ISI marked and reputed make. Body made of ABS plastic with heavy duty bottle piercer/bottle holder. The above item is inclusive of all carriages, taxes, levies.

Providing and installation of 20 litre packaged drinking water jar of reputed brand with cost of installation. The above item is inclusive of all carriages, taxes, levies.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS : 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings. This includes testing of joints complete as per direction of Engineer In-charge. Internal work-exposed on wall the clamps at 1.00 meter, Spacing, PN-16, 16 mm OD(SDR-7.4)

Laying and fitting of G.I pipes (all classes) complete excluding cost of pipes, fittings and Earth Work. 15mm dia nominal bore

Providing and installation of Flex Banners with hollow MS Tubular frame with the texts and images printed as per the directions of Engineer In-charge complete job

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded.

Providing/fixing /installation of 0.5 HP Self Priming Water Pump/Motor including charges of all necessary fittings, wires, switches and fitter required.