Repair to area drainage, boundary wall, security fencing and allied works at Kannur under AGE (I) Cannanore.

Amount

Demolition of cement concrete (un reinforced) in ground floor and paving not exceeding 15 cm thick below or above ground level and removing debris outside MD land all as directed.

Demolition of brick or laterite stone masonry built in cement or cement lime mortar, including all quioins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete article and removing rubbish out side MD landall as directed.

M&L PCC 1:4:8, Type D2 (using 40mm graded stone aggregate) as in foundation, filling mass concrete for post,pole etc. all as specified and directed.

M&L for laterite stone masonry, squared rubble, regular coursed, well bonded and solidly hearted , built in CM (1:6) all as specified and directed.

M & L for cement concrete (1:2:4), type B1 (using 20 mm graded stone aggregate) as in coping etc including form work all as specified and directed.

Taking down cement or cement lime plaster on brick/stone walls incl racking out joints hacking for key scrubbing down with water etc and removing rubbish outside MD land all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on stone masonry surfaces, finished even and smooth without using extra cement all as specified and directed .

M&L 75mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base or pavings finished fair and even including necessary form work complete all as specified and directed .

M&L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes all as specified and directed.

M&L coloured chequered tiles, 250x250x25mm or 300x300x25mm thick set, jointed and pointed in neat cement slurry in floor with grey cement and pigments all as directed. Note: Screed shall be measured and paid seperately.

M&L 100mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavings or path and finished the surface with spike rolling making impressions of expanded metal whilst the concrete is green including necessary form work complete all as specified and directed .

M & L for PCC (1:3:6), type C-1,using 20mm graded stone aggregate as in surface channels and drains finished even and smooth with using extra cement including necessary form works all as specified and directed.

Dismantling fencing post/struts of any type and section including taking out embedded portion and making good disturbed ground to match with same specification and removing rubbish out side MD land all as directed.

Dismantling fencing post/struts of any type and section embedded in concrete including taking out embedded portion and making good disturbed ground to match with same specification and removing rubbish out side MD land all as directed.

Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil all as directed.

M&L PCC 1:3:6, Type C2 (using 40mm graded stone aggregate) as in foundation, filling mass concrete for post,pole etc. all as specified and directed.

M&L mild steel works as in post and struts in fencing including cutting tops to shape as directed, welding, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe- 410 or Fe-310 all as specified and directed.

M&L preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer all as specified and directed.

M&L in repair galvanised 2 stand, steel barbed wire 2.20 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of strandard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire , stples or steel pins etc as directed (each line wire to be measured) all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for except framed truss all as directed.

S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering,) and hanging; also fastening and fixing complete conforming to Gde Fe 410-0 or Fe 310-0 all as specified and directed.

S&F for 1.60mm thick, Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

M/S V B MOHAMMED ALI

Sujith T

RS ENTERPRISES