Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 LAccepted-Finance 72 546A ERATHARA H LIBERTY LANE KALOOR PO KOCHI 682 017 | KOCHI | ERNAKULAM | KERALA | 682017 | L1 | Accepted-Finance Admitted Found Reasonable for Acceptance | |
| 2 | L2₹22.6 L+₹2.5 L (12.3%)Accepted-Finance | L2 | Accepted-Finance Rejected L1 being accepted | |
| 3 | L3₹23.9 L+₹3.7 L (18.6%)Accepted-Finance | L3 | Accepted-Finance Rejected L1 being accepted | |
| 4 | L4₹26.5 L+₹6.4 L (31.5%)Accepted-Finance | L4 | Accepted-Finance Rejected L1 being accepted |
Tender Value
₹22.1 L
EMD Value
₹44,220
Closing Date
2 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Trivandrum
Office of Garrison Engineer Army, Thirumala Post, Trivandrum-06
SPL REPAIRS OR RENOVATION TO ELECTRIFICATION OF SECONDARY BLOCK IN KENDRIYA VIDYALA AT PANGODE MIL TRIVANDRUM
2022_MES_561361_1
GE (ARMY) TVM 9464/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE Army Trivandrum
As per NIT
8 documents required · 8 mandatory
₹500
GE Army Trivandrum
₹44,220
Yes
31 Dec 2022
4 Nov 2022
9 Dec 2022
4 Nov 2022
2 Dec 2022
18 Nov 2022
Amount
Taking down carefully existing unserviceable copper/aluminium point wiring (Light, fan, socket or power) with complete fittings, fixtures and pendant, regulator, switches, lamp holders, switch sockets etc. including making good to disturbed surface/concealed in wall/ceiling/floors etc by finishes/ colouring with existing matching colour, filling of putties complete all as directed
M&L for point wiring complete for One light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including PVC casing-capping minimum 25 mm wide with all fittings and accessories such as bends, tees, joints etc. fixed to wall or ceiling with recessed, pressed steel terminal boxes not less than 1.6 mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly etc all as specified and directed NOTE: Pressed steel terminal boxes concealed in wall with suitable 3mm thick laminated sheet cover plate for mounting switch/sockets etc are deemed to be included in the quoted rate
All as per ser item No. 2 here-in-before but for One fan point controlled by one way switch and regulator
All as per ser item No. 2 here-in-before but for one 5 Amps outlet on same board with other switches/sockets
All as per ser item No. 2 here-in-before but for one 5 Amps socket outlet on independent board.
All as per ser item No. 2 here in above but point wiring with 2.5 Sqmm FRLS cable and 2.5 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.
All as per ser item No. 2 here-in-before but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.
S&F switch piano, flush type, single pole, one way 5 Amp, 240 volt, white or ivory ISI marked complete all as specified and directed
M&L for stepped type electronic fan regulator, 60 Watts, flush type 240 Volts, 50 Hz, suitable for ceiling fan 1200 mm/1400 mm sweep all as specified and directed
S&F switch socket outlet 5 pin, 5 Amps, 240 volts complete all as specified and directed
S&F switch socket combination 2 in 1, 5 pin, 5 Amps flush type 240 volts, white or ivory ISI marked complete all as specified and directed
S&F switch socket combination 2 in 1, 5 pin, 5/15 Amps flush type, universal, 240 volts, white or ivory ISI marked complete all as specified and directed
S&F ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified and directed
S&F sheet steel metal enclosure single pole & neutral with a 2 pin and earth plug and socket complete with one single pole MCB SP 20 Amp, 240 volts complete all as specified and directed.
M&L for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, TPN 4 way, 415 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, including taking down existing unserviceable one and removing from site complete all as directed
All as per ser item No. 15 here-in-before but for SPN 6, 240 volts grade with 200 Amps insulated rated busbar
S & F MCB single pole 5 to 32 Amps, 240 volt, 10 KA, C curve with IP-20 protected terminals including contact indication window for visual indication and safety of operator, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete all as specified and directed Make: Legrand / L&T / Indoasian / Havells
All as per ser item No. 17 here-in-before but for MCB SPN 25 to 40 Amps
All as per ser item No. 17 here-in-before but for MCB TPN 63 Amps
Supply and fixing sub main wiring with 2 runs of 6 sqmm single core, multi-stranded PVC insulated, unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, 20mm bore with conduit fittings and accessories concealed in wall/ceiling/floor including one run of 6 Sqmm multistranded PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete. NOTE: Two runs of 6.0 sqmm copper cable and one run of 6.0 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
All as per ser item No. 20 here-in-before but for sub main wiring with 2 run of 4 sqmm & 1 run of 4 sqmm as earth wire complete.
Taking down carefully existing serviceable Ceiling fan including ceiling cable connection, etc., removing the fan for keeping in safe custody and re-hanging the ceiling fan with down rod including clamps, hooks, holdfasteners etc and connecting up, including making electric connection from ceiling rose or connector to fan complete all as specified and directed.
Taking down carefully existing serviceable exhaust fan including ceiling cable connection, etc., removing the fan for keeping in safe custody and re-fixing the exhaust fan connecting up including making electric connection from ceiling rose/connector to fan complete all as specified and directed.
S&F surface/wall mounted LED batten light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver for and including 1 x 18/20 watt ultra bright LED polycarbonate tubelight 1200mm, 865-CRI 80, 6500K etc including prewired with 3 core flexible cables from connector to light fittings & connecting up including taking down old unserviceable one and removing from site complete all as specified and directed. NOTE: LED tube light and LED batten fittings are two different items Make: Crompton/Havells/ Philips/ Bajaj/ Wipro
S&F Suspended architectural LED luminaire linear in sleek design from ceiling LED batten, inbuilt integrated electronic driver for and including 20 watt, 5700K ultra bright soft-light and glare free symmetrical illumination LED tubelight etc including prewired with 3 core flexible cables from connector to light fittings & connecting up including taking down old unserviceable one and removing from site complete all as specified and directed. NOTE: LED tube light with fittings shall be suspended from ceiling Make: Wipro Cat No: LM22-251-XXX-57-WX or equivalent to Havells, Jaquar, Luker, HPL
Taking down carefully existing serviceable Split type AC of any capacity including cable connections ceiling cable end, etc., removing the AC for keeping in safe custody and refixing the same after rewiring including suitable MS bolts grouted to wall and connecting up and making good to the disturbed surface and testing on completion complete all as directed NOTE: Cost MS bolts, nuts & washers, etc., and minor parts, if any, those are not specified in the schedule and required for smooth functioning of AC shall be deemed to be included in the quoted rate
Excavating in trenches n. exc. 1.5 meter wide and n. exc. 1.5 meter in depth for foundation for erection of poles, stays, laying cables, stays etc and getting out in hard/dense soil and in road cutting all as specified and directed
Returning filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25cm in hard/dense soil complete all as specified and directed
Removing excavated material/surplus soil n. exc. 50 meters and depositing where directed at a level n. exc. 1.5 meter above starting point complete all as specified and directed
M&L for sand filling around the cable with approved quality clean dry river sand unwashed for sand cushioning of Under ground cable including spreading, levelling, watering & punning down to desired thickness complete all as specified and directed Note: Punned thickness only will be considered for payment
Supply and lay in trenches burnt clay bricks, sub class (Designation 75) 'B' of old size for cable protection over the cables complete all as specified and as directed
Supply & laying in trenches/drawn through pipes or in road crossing/paths/drains/ducts/floors/along poles/equipments etc., of XLPE insulated, armoured with multistranded aluminium conductor cable conforming to IS-7098 Part-I (1998), heavy duty (LT UG cable) conforming to IS-1554, 1100 Volts grade of size 50 sqmm 3½ core nominal cross sectional area including necessary double compression copper gland and connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and directed NOTE: Excavation, earthwork, sand cushioning, brick protection & cable protection etc. will be measured and paid separately under relevant items of this schedule. Make: Havells / V-Guard/Gloster/KEI//MESCab/Polycab
Supply & laying GI steel tubing light grade 80mm dia for protection of cable on poles, under road crossing etc, complete all as directed. Make: Jindal/ Tata/Swastik/Prakash/Zenith
Dismaqntling the existing unserviceable/outdated LT feeder panel box and supplying, fabricating, installing, testing & commission cubical pattern CPRI approved LT feeder Panel box Outdoor type, medium channel 75mm floor mounted (mounted on pedestal) totally enclosed factory made & tested, dust and weather/vermin proof (protection class IP-65) double door front opening with locking arrangement made of frame MS angle iron frame work of size not less than 100mm x 50mm x 6 mm (bottom base chanel) and CRCA sheet of 3.15 mm thick outer shell & 2.0mm thick for inner shell as per IS-5039 duly painted with two coats of synthetic enamelled paint of approved colour over a coat of red oxide primer outside & inside complete, suitable for 415 Volts, 50Hz, 3 phase 4 wire system having aluminium bus bar - 4 Nos. of two sets each with epoxy insulated coating duly colour coding and supported on SMC insulators of suitable length of 300 Amps current carrying capacity for three phase and neutral, having common aluminium earth bar of size 25mm x 5mm at the rear with 2 Nos. earth stud for entire panel, solid connections from main busbar to switch gears with required size copper conductor cables not less than 2.5 sqmm with suitable size PVC copper thimbles/lugs, nut, bolts & washers, gaskets etc., and providing cable glands at cable entry into panel, making all electrical connection of incoming and outgoing complete with the following accessories and mounting panel board on ground with PCC (1:3:6) bedding upto a height of 30cm above ground level complete all as specified and directed:-
M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0mm thick, burried directly in ground (earth pit not less then 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.
M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0mm thick, burried directly in ground (earth pit not less then 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised iron strip 25x4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.
SHILPA ENGINEERS AND CONTRACTORS
JESWIN BUILDERS
K A ANTONY & SONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .