GENERAL G G H S S Balussery Construction Of Auditorium Cum Class room For High School General Civil Work

Amount

Building

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

OD15238/2024-2025:Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge.Note: Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is not payable and less usage of cement is recoverable. All work up to plinth level

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

M E P Work

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD89603/2024-2025:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, bending (hydraulic) fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete as per instruction of engineer in charge

OD110781/2024-2025:Steel work for purlin/single section with G I pipes including cutting, hoisting, bending(hydraulic) fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD90231/2024-2025:Providing and fixing M.S. Base plate above pedestal and anchoring done by necessary anchor bolts. (anchor bolt charges not included in this item)

OD90259/2024-2025:Providing and fixing Foundation Anchor bolt of 20mm dia and 700mm length (Mild steel) as instruction of engineer in charge.( Dual Nut per bolt inclusive in this item )

OD96988/2024-2025:Providing and fixing colour coated galvalume profile curved sheets upto any height (Colour and shape of profile as approved by the Engineer-incharge), 0.50mm(TCT) total coated thickness( tolerance as per relevant IS code), material yield strength 550 MPa, galvalume AZ-150 (zinc aluminium alloy coating nominal composition : 55% aluminium, 43.5% zinc & 1.5% silicon mass total of both sides) with regular modified polyester paint and coating of 20-25 micron RMP on exposed surface including primer and 7-10 micron epoxy coating on unexposed surface including primer. The sheet should be supplied in single length as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5X55mm) with EPDM seal and washers make coroshield/durotuff (as per instruction of Engineer-incharge) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. All screw should be sealed with silicon sealant.

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD89413/2024-2025:Providing and fixingUPVC 320mm Squre Rain gutter, fittings including Runner at necessary intervals. This includes jointing of pathy with one step PVC Solvent cement complete as per direction of Engineer-in-Charge. At lower end of roofing for collecting rain water and carried to pipe, including cutting chases and making good etc.

OD89414/2024-2025:Providing and fitting M.S Clamp for 320mm Pathy fixing in position ( round or rectangular ) etc., including ,fixing in position and applying a priming coat of approved steel primer, including welding etc. complete

OD98907/2024-2025:Providing and fixing PVC moulded fittings/ accessories for 320mm rain water gutter , including jointing with PVC solvent cement-320mm to 90mm drop

OD98908/2024-2025:Providing and fixing UPVC moulded fittings/ accessories for 320mm rain gutter -320 mm stop end

OD98934/2024-2025:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 90 mm dia 4 Kg/cm2

OD98939/2024-2025:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 90 mm dia Elbow

RAJAN P

Fahad Marakkar P P

THE URALUNGAL LABOUR CONTRACT CO-OPERATIVE SOCIETY

Bidder Name

THE URALUNGAL LABOUR CONTRACT CO-OPERATIVE SOCIETY

RAJAN P

FASALURAHMAN M K

Fahad Marakkar P P