ADDN/ALTN AND SPECIAL REPAIRS OF SELECTED OLD MD ACCN AT JAMNAGAR MIL STN (JOB NO 01/AMWP/JAMNAGAR/2021-22)

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of unreinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

S&F Non-skid ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thck screed bed in CM 1:4 including 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate complete all as specified and directed.

S&F Non-skid ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick plaster in CM 1:3 complete all as specified and directed.

S&F Non-skid ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thck bedding layer in CM 1:4 complete all as specified and directed.

S&F coloured Glazed ceramic tiles in vertical surface of size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in CM 1:3 complete all as specified and directed.

M&L 20mm thick Granite(of any type) work (table rubbed and polished) in cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment with hole for gas pipe line complete all as specified and directed.

M&L 18-20mm thick Granite(of any type) work (table rubbed and polished) in window cills in single piece set in cement mortar (1:4) including pointing using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of reinforced Concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspendedwork complete all as specified and directed.

M&L Reinforced cement concrete (nominal mix) type A-1 (1:1.5:3) using 20 mm graded stone aggregate in chajjas complete all as specified and directed.

M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges on flat surface complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L 20-25 mm thick Machine cut & double side polished Kota stone slab as cupboard shelves and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and fixing in position after all necessary arrangements complete all as specified and directed

M&L Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick CM 1:6 bedding layer laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 15-18mm thick Machine cut kota stone slab as in skirting over & including 10 mm thick CM 1:3 backing coat and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down Doors chowkat or frame n exc 1.5 Sqm but with shutters (without taking off shutters from the frames) and removing out of site complete all as specified and directed.

Taking down Doors chowkat or frame exc 1.5 Sqm and n.exc 4.00 Sqm each but with shutters (without taking off shutters from the frames) and removing out of site complete all as specified and directed.

Taking down Doors chowkat or frame upto 1 Sqm but with shutters (without taking off shutters from the frames) and removing out of site complete all as specified and directed.

S&F Factory made solid PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

S&F Pressed steel frames for doors size 125 mm X60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed.

S&F Pressed steel frames for doors size 105 mm X60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed.

M&L PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) filling in door and frames, any size, single or double rebated, including arrangements complete all as specified and directed.

M&L applying one coat of black bituminus paint on Surfaces of any description wood,steel, iron, concrete, brick, stone, etc exceeding 10cm in width or girth complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F factory made 35mm thick 2nd class hard wood glazed & skeleton door shutters,open rebated and prepared to recive gauge etc(without sash bars) edgs of framing plain, chamfered or etc,size of members of shutters as specified in SSR Pt-I, Sec-8 Clause 8.20 (a) without sash bar etc complete all as specified and directed.

S&F 25 mm Thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 25 mm wide 6 mm thick teak wood lipping on veneered particle board fixed with nails as in cupboard shutter and shelves complete all as specified and directed.

S&F 100 mm long Hasp and staple, safety type, aluminium annodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and directed.

Taking down steel/wooden ventilators chowkat or frames exc 1.5 Sqm but n exc 4 Sqm each. with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down steel/wooden ventilators chowkat or frames n.exc 1.5 Sqm each. with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F powder coated anodised Aluminium alloy sections 3 tier track sliding windows seires B weight of section frame 1.248Kg/RM and shutter section weight 0.547Kg/RM duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0mm nominal thickness, Aluminium wire cloth 0.45mm dia and average width of aperture 1.4mm, aluminium alloy handles etc. complete all as specified and directed. Note : Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, etc.

S&F powder coated anodised Aluminium ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick or equivalent section fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pinhead glass and remaining portion to be louvered using 4mm thick pinhead glass and louvered portion covered with Aluminium wire cloth 0.45mm dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and directed. Note : Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading etc

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples or with second class hard wood beadings complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250 mm long complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 150mm long complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 100mm long complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, 140 mm with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 100mm butt hinges, medium weight, stainless steel complete all as specified and directed.

S&F 75 mm butt hinges, medium weight, stainless steel fixed in MS frame or welded with MS angle frame complete all as specified and directed.

S&F in repair Tubular towel rail, brass CP 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair SS Curtain Rod Decorative pattern 25 mm dia complete all as specified and directed.

S&F SS Curtain Rod Bracket decorative type suitable for 25 mm dia curtain rod complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 15 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 20 mm dia complete all as specified and directed.

M&L for cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth in stone or PCC wall complete all as specified and directed.

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying 50 mm dia (LDPE) silent pipe of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed.

S&F in repair 25 mm bore Ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brassferrule and fixed complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in any position not otherwise specifically provided complete all as specified and as directed (sunken tortion) complete all as specified and directed.

M&L 5mm thick rendering in cement plaster 1:3 with WPC on walls of sunken floor incl finished even and smooth w/o using extra cement at side walls complete all as specified and directed. Note:- (WPC will be measered and paid saperately)

M&L 30 mm thick PCC type B-0, 1:2:4 (12.5mm graded aggregate) flooring on the base of sunken portion complete all as specified and directed.

M&L for cleaning vertical and horizontal surfaces of sunken slab using wire brushing followed by sanding with emery paper for loose materials/dust and applying two coats of epoxy resin component (Dr. Fixit DAMPGUARD or equivalent) solution/mix using nylon brush pouring Base part in appropriate container followed by the Hardner part and mix thoroughly to attain homogeneous smooth paste and dilute the mixed compound with water in ratio 1 part Base: 1 part Hardner: 1 part water by slow addition and mix thoroughly until a brushable consistency is obtained, first coat will be allowed to dry for 6 to 8 hrs before application of second/final coat) including curing treated surface for 24 hrs complete including applying evenly a coat of blown bitumen @ 1.5kg/sqm over entire treated surfaces including spout holes before filling lean concrete complete and all as specified as per manufacturer instruction.

M&L PCC type E-2, 1:5:10 (40 mm graded stone aggregate) as in mass concrete for filling in sunken floor after applying appropriate treatment to side walls complete all as specified and directed.

M&L 75 mm thick Cement concrete type C-1, 1:3:6 (20 mm graded aggregate) as in plinth protection complete all as specified and directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A complete all as specified and directed.

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick surfaces complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on stone surfaces finishing fair and even without using extra cement complete all as specified and directed.

M&L for applying 3mm thick wall care putty on Internal walls complete all as specified and directed.

M&L for rendering 15 mm thick rendering in two layers in 5 mm thick rendering in CM 1:4 over a coat of 10 mm thick rendering in CM 1:6 on the external surfaces of stone masonary fair and even without using extra cement with WPC complete all as specified and directed. Note:- (WPC will be measered and paid saperately)

M&L for rendering 5 mm thick in CM 1:3 on ceiling to be finished even and smooth complete all as specified and directed.

M&L for preparation of new ceiling surface and applying 3 coats of white wash complete all as specified and directed.

M&L for preparation of plastered or unplastered surfaces of walls any width or girth etc and applying two coats of exterior weather coat paint over a coat of exterior wall care putty and a coat of primer complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls any width or girth etc and applying two coats of exterior weather coat paint complete all as specified and directed.

M&L for preparation of new plastered surfaces by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulation distemper on wall etc complete all as specified and directed.

M&L for complete removal of existing treatment on wall and applying two coats of oil bond distemper over a coat of primer and 3 mm wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling and applying two coats of white wash after preperation old decorated surface complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc capacity 250 Ltrs to 500 Ltrs complete all as specified and directed.

S&F Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed complete all as specified and directed.

S&F in repair PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 110mm PVC (SWR) single 'T' equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) bend any radius, 110 mm dia complete all as specified and directed.

S&F in repair PVC (SWR) bend any radius, 75 mm dia complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) branch piece, single (double Y) equal or unequal complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair fancy type CP bib taps, 15 mm bore with crutch or butterfly handle and screwed down, fixed complete all as specified and directed.

S&F in repair CP Pillar taps 15 mm dia, fancy type, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair stop valves cast copper alloy chromium plated 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends, fixed complete all as specified and directed.

S&F in repair Soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Vitreous china squatting pan, 'Orrisa' pattern , size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F Waste fittings, 32mm dia brass, chromium plated for glazed ware sinks , basins, etc. with long screwed shanks and fly -nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair 15 mm bore Chromium plated shower roses with or without swivel joints, any size, including fixing to GI pipe or union complete all as specified and directed.

S&F in repair PVC valveless syphonic action type ,flushing cistern Low level white,with,with inlet ball valve, float and handle 10 Ltr capacity including brackets complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 36" x 18" bowl size 16" x 14" x8" complete all as specified and directed. Make: Bluestar Sanitary Industries Pvt Ltd (Siever Shine), Model No BSS BSD 53 or technocommercial equivalent makes as per Appx 'B'.

M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia complete all as specified and directed.

M&L Mild steel TMT bars 6 to 8 mm ida, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia complete all as specified and directed.

S&F Welded steel wire fabric of weight exc 3.5 kg/Sqm and N. exc 4 kg/ Sqm, fixed to steel members with spikes complete all as specified nad directed

Removal of all loose/unsound/bad/damaged concrete or plaster existing RCC structure of slab/beams/walls by using chesel/hammar. Cut and remove unsound reinforcement bars, wires etc without damaging the sound reinforcement . clean loose rust from bars manually with brush, fixing mild steel welded fabric of weight exceeding 3.5 kg/sqm but n exc 4kg /Sqm with existing bars or by welding on it (supplymentary bars wiil be measured and paid separately). Applying eppoxy bonding agent and making good with polymer modified plaster 15 mm to 20 mm thick in CM 1:4 with epoxy bonding agent complete all as per manufacturer instructions over a coat of rust removing alkaline primer and match the finishing to the existing surface in ground floor complete all as specified and directed.

M&L for guniting/shotcrete using shrinkage controlled, polymer modified fiber reinforcement cementitious mortar ( Fosroc rendroc SP-40 or equivalent) using guniting / shotcrete pumps and allied equipment as required including taking out all loose material from repairable surface cleaning and exposing reinforcement etc where required and applying a coat of epoxy bonding agent to existing concrete surface and rust proof primer to reinforcement before shotcrete/ guniting complete all as specified and directed.

Taking down all existing roof treatment and demolition of existing cement concrete padding/levelling course min 60 mm incl wire brushing and cleaning loose dust etc from surfaces of RCC roof incl flashing and juntion of parapet complete all as specified and directed.

M&L 50 mm thick PCC type B1 1:2:4 (20 mm graded aggregate) as in levelling course/padding to desire slope and fill the depression with slope 1:40 complete all as specified and directed.

M&L for water proofing treatment to non assessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @3% by weight of cement & applying one coat of bitumenous primer @ 0.30 kg/Sqm and laying 3 mm thick APP based polymeric modifed membrane with polyster non woven reinforced of weight not less than 3kg/Sqm with polythene finished sealing with side overlaps of 75mm & 100 mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed.

S&F CP corner glass shelf 300 mm long with ABS bracket, CP brass screws etc. including minimum 6 mm thick plain glass complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F 32 mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F three way wall mixture CP for mixing hot & cold water screwed down for iron pipe 15 mm bore complete all as specified and directed.

S&F PTMT bathroom mirror cabinate 500mm x 400mm complete all as specified and directed. Make :-Prayag Cat No 556 equivelent make as per Appx 'B'.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified

Demolition and breaking up drain pipe 100 mm dia ( salt glazed ware AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil, complete all as specified and directed.

M&L for reinforced concrete pipes, class NP-2, 150 mm dia, laid and jointed complete with collars in trenches and jointed in cement mortar as specified complete all as specified and directed.

M&L for concrete bed to drain pipes of 150 mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregates) in precast manhole covers complete all as specified and directed. Note:- Reinforcement shall be measured and paid for separately.

M&L Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face with particle board core complete all as specified and directed.

M&L for MS works framed work such as framed guard bars ,barred iron doors, ladders, framed balusters, railings, frame work of water tanks and similar work conforming Fe 290 , Gde -E -165 , for ornamental and intricate design complete all as specified and directed.

M&L Dubbing out average 12-15mm thick on irregular face of walls (whenever specifically ordered in writing by Engineer-in-Charge) in CM 1:4 complete all as specified and directed. Note:- The Surface of the dubbing out coat shall be left rough or scored to provide key for the top plaster coat.

M&L Cutting holes into or through stone masonary built in cement mortor/ cement lime mortor and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required not exc 150 Sqcm each complete all as specified and directed.

Dismantling of structural steel work incl doors gate etc. complete all as specified and directed.

S&F Cast iron work grade FG 150, unmachined, in railing, frames, manhole, balusters and similar articles n exc 5 kg each complete all as specified and directed.

M&L Framed work Fe 410W (Gde- E- 250) quality-A as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or covering. Doors, etc. to beprepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F 20 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L wrought plain fillets, square, rectangular or triangular in section 2nd class hard wood of size exc 13 sqcm but n exc 25 sqcm, clean sawn, secured with nails or brads fixed with screws complete all as specified and directed.

S&F Stainless steel Kitchen plate racks 0.63 mm thick over all size 24" x 30" x10" complete all as specified and directed. Make: Bluestar Sanitary Industries Pvt Ltd (Siever Shine) Model No BKSPR-311 or equivelent make as per Appx 'B'.

S&F cloth drying system pully type four rod assembly 6 feet size apporved by the GE as per sample.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep getting out in hard / dense soil including clear away all shrubs, bushes etc complete all as specified & directed.

Excavating in post holes (or similar holes) in soft / loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified & directed.

M&L for providing plain cement concrete type C-2 (1:3:6) (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing plain cement concrete type D-2 (1:4:8) (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for precast cement concrete block masonry, Type C-1, 1:3:6 (20 mm graded stone aggregate) with solid blocks exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed.

Removing excavated material to a distance exc. 250 m but n exc. 500 m and depositing where directed at a level not exc 1.5 meter above the starting point complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

S&F Machine pressed precast Concrete interlocking paver block rubber moulded any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.

M&L 25 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for providing, cement concrete Type B-1 (1:2:4) using 20 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for rolled steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M&L for preparation of New steel surfaces of any description, over 10cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for rolled MS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long diameter of neck 5 to 10 mm complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,out let box, fitting and fixture such as bulk head fitting, sketch fittings and making good the disturbed rurfaces of walls floors etc all as directed.

Taking down sub main wiring of any size fixed in any position , complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories concealed in wall, ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anticorrosive paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick Hylam sheet cover for fixing of switches, sockets etc including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following :

One light/Fan point controlled by one way switch.

One light point controlled by two - 2 way switches for stair case.

One Bell point controlled by one switch bell push

One 5 Amps socket on same board with other switches.

All as per item No-144.00 hereinbefore but point wiring with 2.5 Sqmm single core multistranded copper conductor 2.5 sqmm PVC insulated unsheathed multistandard copper conductor (FRLSH) as earth wire on independent board for 15 Amps switch/ socket point complete all as specified and directed.

S&F switch piano flush type single pole one way 5 Amps 230 V. complete all as specified and directed.

S&F switch piano flush type single pole two way 5 Amps 230 V. complete all as specified and directed.

S&F switch socket out let 3 pin 5 Amps flush type 230 Volts multipurpose complete all as specified and directed.

S&F switch socket out let flush type 230 Volts 5 Amps and 15 Amps multipurpose 3 Pin, 15 Amps and one pin, 5 Amps controlled by one switch complete all as specified and directed.

S&F socket out let 3 pin, 5 Amps, 230 Volt multipurpose flush piano type. complete all as specified and directed.

S&F fan regulator Electronic Step type (min 5 steps) 2 module, 120W complete all as specified and directed.

S&F switch Bell Push botton type 5 Amps single pole one way. complete all as specified and directed.

S&F Bell Ding Dong AC 230 volts type single pole complete all as specified and directed.

S&F ceiling rose surface backelet ISI marked 2 to 3 terminal isolated body complete all as specified and directed

S&F lamp holder insulated body with back plate for batten fittings complete all as specified and directed.

S&F LED batten fittings 4ft 20 Watt with surge protection not less than 04 KV, luminous efficency more than 100 lumen/watt, minimum 50000 burning hours, CRI >80 incl clamps, PVC gutties and copper flexible wire for connecting to ceiling rose complete all as specified and directed.

S&F LED Batten fittings 1ft 5 Watt with surge protection not less than 04 KV, luminous efficency more than 100 lumen/watt, minimum 50000 burning hours, CRI >80 incl clamps, PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed.

S&F LED Retrofit lamp 9 Watt white 6500K cool day light in angle holder complete all as specified and directed.

S&F MCB Distribution board sheet metal enclosure 4 way TPN 415 volts double door for mounting MCBs complete all as specified and directed

S&F MCB Distribution board sheet metal enclosure 8 way SPN 240 volts for mounting MCB double door complete all as specified and directed

S&F MCB SPN 32 Amps 240 Volts rupturing capacity 10KA. complete all as specified and directed.

S&F MCB TPN 63 Amps 415 Volts rupturing capacity 10KA. complete all as specified and directed.

S&F MCB single pole 5 to 32 Amps C series all as specified and rupturing capacity 10 KA, complete all as specified and directed.

M&L for sub main wiring with two runs of 2.5 Sqmm single core PVC unsheathed and insulated 1100 Volt grade/multistranded copper conductor FRLSH drawn through PVC heavy duty conduit and accessories fixed and concealed in walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 2.5 Sqmm single core as earth continuity wire all as specified and directed.

M&L for sub main wiring with two runs of 4.0 Sqmm single core PVC unsheathed and insulated 1100 Volt grade/multistranded copper conductor FRLSH drawn through PVC heavy duty conduit and accessories fixed and concealed in walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor FRLSH of 4.00 Sqmm single core as earth continuity wire all as specified and directed.

Note for Item No 164.00 & 165.00 :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only complete all as specified and directed.

Taking down & refixing Exhaust fan 225mm sweep AC, 240 volts, metal body ,in same location after cleaning , greasing and painting with synthetic enamel paint by sprey painting including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose/connector to fan complete all as specified and directed.

Taking down & refixing Ceiling fan 1200mm sweep AC, 240 volts,Metal body ,after cleaning , greasing and painting with synthetic enamel paint by spreying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose/connector to fan complete all as specified and directed.

S&F ceiling fan complete and accessories 230 V, 1200 mm sweep 5 star rating complete all as specified and directed.

Taking down & refixing of water heater geyser 25 Ltr capacity glass lined metal body Geyser vertical type with complete accessories in same location after completion of repair of bldg including painting with synthetic enamel paint by spreying and filling cavities with filler, one coat after cleaning all dusts etc complete all as specified and directed.

Supply, fixing, testing and commissioning 30W LED security light fitting with system output of 3000 lumens & with dedicated street light optics, System efficacy of greater than 100lm/W luminarie should have pressure die cast aluminium LM6 housing. Luminaire should have dedicated street light optics for better uniformity & spacing. Luminarie should have air vents in housing for proper thermal management. Min IP preventation should be IP65. System power consumption (including driver losser) should not exceed 20W complete all as specified and directed.

S&F security light bracket made out of GI pipe 25mm light grade ISI marked 1.5 Mtr long bend to shape as required for LED fittings at site including M S Clamp 2 Nos made out of flat iron 50X5mm with necessary nuts bolts and two coats of alluminium paint over a coat of red oxide primer complete all as specified and directed.

Taking down existing energy meter from site and deposit to MES storeyard and refixing the same meter after completion of work complete all as specified and directed.

S&F smart single phase, four wire, dual source, prepaid energy meters BIS 15884 marked in existing meter board / floor panels with prepayment capacity touch keypad based digital having current range 10-60 Amp 240 volts accuracy class 1.0 alongwith parallel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbulit feature to sense the DG mode through PLSI, dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG capable to define for tariff slabs, happy hours and holiday defination including suitable size transparent acrylic enclosure with sealing arrangement complete all as specified and directed.

S&F Sheet metal enclosures with socket plug top and single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20Amp MCB SP 'C' series of 240 volts complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete.

NOTE FOR ITEM NO. 175.00:- Rate quoted by tenderers shall be deemed to include for following provisions:- [i] Excavation & earth work in any type of soil including removing of surplus material upto 50 Mtr. [ii] PCC 1:3:6 type C-1 using 20mm graded aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles. [iii] Main earthing lead from earth electrode to test point upto 7.5 mtr. [iv] Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd. [v] GI protection pipe of size 15 mm bore light grade 7.5 mtr.

Removing excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 meter above the starting point complete all as specified and directed.

Taking up/down GI tubing and connections 20mm size of pipes including all fittings complete all as specified and directed.

Taking up/down GI tubing and connections 25mm size of pipes including all fittings complete all as specified and directed.

Taking up/down GI tubing and connections 50mm size of pipes including all fittings complete all as specified and directed.

S&F GI tube medium grade 20mm dia with all fittings laid in trenches complete all as specified and directed.

S&F GI tube medium grade 25mm dia with all fittings laid in trenches complete all as specified and directed.

S&F GI tube medium grade 50 mm dia with all fittings laid in trenches complete all as specified and directed.

S&F gun metal valve with iron wheel head ,screwed both ends for iron pipe and fixed of size 20 mm complete all as specified and directed.

S&F gun metal valvs with iron wheel head ,screwed both ends for iron pipe and fixed of size 25 mm complete all as specified and directed.

S&F gun metal valve with iron wheel head ,screwed both ends for iron pipe and fixed of size 50 mm complete all as specified and directed.

RACON CONSTRUCTION

S t modi

dave engineering works

Vijay Construction Co

Hi Tech Transpower Pvt Ltd

SONU INFRATECH LTD