REPAIR MAINTENANCE OF INTERNAL ROAD OF OTM ACCN AT POCKET VII AND VIII UNDER GE ROORKEE

Amount

Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth making good by filling in screened and graded road metal, watering and well ramming making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) complete all as specified and directed.

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with broomny bags to remove all loose dirt etc complete all as specified and directed.

M & L applying evenly a tack coat/ priming coat with bituminous primer @ 5 Kg per 10 Sqm using paving bitumen, over surfaces including preparation of surfaces all as specified and directed.

M&L for premix bituminous Maccadam laid/ rolled and compacted to required gradiant and camber consolidated thickness n exc 75 mm with paving bitumen any penetration with VG -30 binder content @ 4% by weight of total mix complete al as specified and directed.

M&L for Bituminous premixed semi-dense asphaltic concrete 30 mm consolidated thckness with 5.5 % binder VG-30 content by weight of total mix rolled and compacted to required camber and gradient complete all as specified and directed.

M & L for applying termoplastic reflective paint as in road marking 02 mm thick single coat as in center line or edge line road marking of 150 mm width using HOT MARK termoplastic paint (HOT application) white by indigenous modem propelled road marking method as directed incl all ingredient such as binder glass beads Titanium -dioxide calcium carbonate linter fillers themoplastic requirement for glass beads shall be per Table no 800-4 specifiation incl spraying of glass beads instruction , approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

VERMA CONSTRUCTION CO (BID ID -3205657)

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3208173)

RADHA ENTERPRISES (BID ID -3206628)