PROVN OF JIG PLATFORM, ANTISTATIC TILES, TOILET BLOCK, GATE, SECURITY STREET LIGHTS SPL REPAIRS TO LIGHT FITTING AT LL BARODA

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete.

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation, etc or for the shafts, well, cesspits, manholes, pier holes, etc n exc 10 Sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete.

Excavation in trenches n exc 1.5 mtr wide for for foundation, taking out cable / pipe line etc., n.exc 10 sq mtr on plan but exc 1.5 mtr and n.exc. 3.0mtr depth and getting out in soft/loose soil complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete

Spreading and leveling of soft/loose soil in floor in layers n exc. 25 cm thick including well ramming watering as required complete.

Removing excavated soil n exc 50 m and deposited where directed at a level n. exc 1.5 m above the starting point complete

M&L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable complete.

M&l for hardcore of guage n. exc 63mm, deposited, spread & leveled in layers n exc. 15cm thick,watered & rammed to a true surface complete

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with back fill to be measured) complete

Treating the top surface of filled earth at the rate of 5 litres of emulsion per squaremetre of surface complete

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete

Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete

M&L Plain Cement Concrete (PCC) type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete complete.

M&L Plain Cement Concrete type C2, 1:3:6 ( 40 mm gde stone aggregate) in foundation filling and mass concrete complete.

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, kneelers, apex stone, bed plates and the like including weathering slightly rounded or chamfered angles and throating including use of form work complete.

M&L for Plain Cement Concrete type B1 1:2:4 using 12.5 mm graded aggregate as in DPC complete.

M&L for Nominal mix reinforcement cement concrete 1:2:4 type B-1 ( using 20mm graded stone aggregates) as in foundations, including raft, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete.

M&L Nominal Mix reinforcement cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc complete.

M&L for M-25 Grade design mix reinforced cement concrete in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, mass concrete complete.

M&L for M-20 reinforced cement concrete work (design mix) with using 20mm graded stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. Complete

M&L for M-20 reinforced cement concrete work (design mix) with using 20mm graded stone aggregates as in Roof Slab complete

M&L for M-25 Grade design mix reinforced cement concrete in lintel, lintel beams; plinth beams; bases for columns, etc; basement slabs, mass concrete.

M&L for M-20 reinforced cement concrete work (design mix) with using 20mm graded stoneaggregates as in beams, (Roof Beam or Plinth Beam) cantilievers, bressumers over 1.5 mtr, lintel Beam including chajja complete.

M&L for M-25 Grade design mix reinforced cement concrete in column, pier, pillars beams; plinth beams; bases for columns, etc; basement slabs, concrete complete.

M&L for M-20 reinforced cement concrete work (design mix) with using 20mm graded stoneaggregates as in columns, pillars, piers, posts and struts complete.

M&L for M-20 reinforced cement concrete work (design mix) with using 20mm graded stone aggregates as in Fins, Fascia complete.

Supply only water proofing compound

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement Mortar 1:6 complete

M&L for brick work with sub class 'B' bricks built in CM 1:4 straight or curved on plan to any radius in half brick thick walls with old size bricks complete.

M&L well burnt bricks sub class 'B' as in protection of cable laid dry, flat abutting each other width wise complete.

M&L for 16-18mm thick green marble in one piece machine cut as in cooking plate form set and jointed in grey cement slurry and pointed in coloured cement (1:2) using marble dust with admixture of pigment to match with marble shade, laid over and including 20mm thick screed bed in CM 1:4 complete.

M&L for Use and waste formwork for rough finished flat surface of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete.

M&L for use and waste of formwork to soffits of suspended slab such as roof slab floor slab, landing and similar work complete

M&L for Use and waste of formwork for rough finished flat surface of concrete sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete.

M&L for use and waste of formwork for rough finished flat surface to fins, louvers, fascias complete.

M&L for form work to sides of pillars, posts, struts, columns, of rough finished surface of concrete flat faces complete.

S&F factory made 35 mm thick 2nd class HW plain, framed, panelled shutters (two panels), with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), cleaned seasoned and chemically pressure treated complete.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram / product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required complete.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as per specifications and as per drawing shown on sl page No 150 of SSR part II (for item-884) complete,

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete

S&F Butt hinges, Medium weight, cold rolled mild steel, and fixed 100mm size complete

S&F 200mm size aluminium anodised, barel tower bolt of extruded section complete.

S&F 150mm aluminium alloy handles, fabricated type anodised complete

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete

M&L mild steel work as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete

M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete

S&F MS steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, cut to length, bent to shape required including cranking bending for hooping for column, hooking ends and bindings with and including mild steel wire (annealel) not less than 0.9mm dia complete.

M&L for framed work as in doors or gates of angle or other section with gusset plates, MS Plates, rails, braces etc., drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings the same with necessary stainless steel nuts and bolts including cutting holes for bolts, hanging; also fastening and fixing of Fe-410-W Gde E-250 of quality "A' complete.

M&L for 105 x 60mm pressed steel door frames for doors with one or more rebates including necessary fixing lugs, hinges, locks strike plates etc. Complete.

S&F of Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. Complete

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete.

M&L for granite tiles 12 mm thick machine cut bedded, jointed and pointed in white cement with admixture of to match the shade of granite stone including grinding and polishing over & including 20mm thick screed in CM 1:3 complete

M&L cement concrete 100mm thk, type D2 1:4:8 (40 mm graded stone aggregate) in sub base of flooring complete.

M&L 75 mm thick plain cement concrete type D-2, 1:4:8 using 40 mm graded aggregate as in subbase complete

M&L 25mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in floor complete.

M&L for cement concrete 100mm thick type B2 1:2:4 40mm graded aggrete as in approach path laid in alternate pannels incl use of form work / screed and to dividing the area in panel, finished even and smooth complete.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete.

M&L for glazed ceramic coloured wall tiles in vertical surface 300x200 / 350x250 / 450X350mm X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick rendering in CM 1:4 complete.

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM(1:6) complete

M&L for vitrified coloured tiles 10mm thick Industrial use, area of each tiles exceeding 0.11sqm and n. exc 0.18 sqm in floors etc. Set and jointed in neat cement slurry and pointed out in white or coloured cement to match, laid over and including screed bed 15mm thick in CM 1:6 complete.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 grade with Grey cement and pigment over 25 mm thick sand cushioning complete

Dismantling of floor hearth or wall tiling including cement mortar bedding complete.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 for finished even and smooth without using extra cement complete.

M&L for 15mm thick Screed bed or bedding layer of cement mortar 1:4 for laying floor finishes with 3mm thick trowelled to even and smooth finish in CM 1:2 complete.

M&L Rendering 10mm thick in CM 1:4 on concrete / brick masonry surfaces, finished even and smooth without using extra cement complete.

M&L for rendering 10mm thick on fair faces of concrete surfaces on ceiling with CM 1:4 complete.

M&L for rendering 15mm thick on brick on other than fair faces of bricks or concrete surfaces with CM 1:4 complete.

M&L for 10 mm thick cement plaster in CM 1:3 with using water proofing compound @ 3% by weight of cement as per manufacturer's instructions complete. (WPC will be measured separately).

M&L rendering 15mm thick on other than fair face of brick-work or on one side of lathing in CM 1:4, finished even and smooth without using extra cement & mixed with waterproofing compound @ 3% by weight of cement as per manufacturer's instructions complete. Note:- WPC shall be measured and paid separately.

M&L preparation of newly plastered surface and applying two coat of cement base paint over one coat of alkali resistant primer complete.

M&L for prepararion of new plsatered surface of wall and applying two coats of cement base paint over a coat of cement base primer complete

M&L preparing new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete

M&L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrom primer complete.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or grith and apply two coats of synthetic enamel paint over a coat of pink primer complete.

S&F powder coated aluminium window/door sliding type with 3 track ( one mosquito proof shutter & two glazed shutter ) without sash bar with stile and rail of size 40mm X 18 mm and 0.91 mm thick and frame of size 92 mm X 32 mm and 1.30 mm thick including 5.00 mm thick sheet glass, galvanised mild steel wire cloth 0.56 mm nominal dia of wire and 1.18 mm aparture including glazing clip, rubber packing, decco grill and handle cum locking device complete.

M&L for Antistatic flooring with 600 X 600 X 9.50 mm Antistatic tiles with grout (conductive) 320grms/Sqm,18 gauge copper wire grid of 600 X 600 mm (7.69mtr/sqm) all as per Manufacturer's instruction etc. Complete

M&L for 40mm dia bore GI tubing light grade fixed on wall/pole complete

M&L for 40mm dia bore GI tubing light grade laid in trenches / under road complete

M&L for bracket for fixing street light fitting made out of 40mm dia GI pipe medium grade including welding with pole of 17 degree angle to shape of length 01 mtr complete

S&F 20mm bore of pipe GI steel tubing medium grade to wall/trenches including all fittings such as Tees, elbow, bends etc complete

Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete

Supplying and laying of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete.

Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete

M&L for Rotational moulded polyethylene (HDPE) water storage tanks, double layer (cylindrical vertical with closed top) capacity 1000 litres hoisted and placed in posiition on PCC platform complete

S&F Bib tap cast copper alloy with crutch or butterfly handle screwed down, fancy type chromium plated screwed for 15 MM bore iron pipe or brass, ferrule & fixed complete.

S&F 15 mm bore CP stop cock / Angle cook cast copper alloy, fency type screwed down high pressure with capston head screwed for iron pipe complete

S&F Stop valve, cast copper alloy, chromium plated fancy type handle, screwed down, high pressure with push type handle screwed for 15mm bore iron pipe and fixed complete.

S&F in repair Gun metal gate valve iron wheel head screwed both ends for GI steel tubing suitable for 20mm bore of pipe complete

S&F 20mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete.

S&F 20mm dia Ball brass valves, high pressure, with polythene float and flynut, screwed for iron pipe or brass ferrule and fixed complete

M&L for Grating square 150 mm size of PTMT (Minimum weight 100gms) complete

S&F for Towel rail 600 mm long with PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats.complete

S&F PVC connection 600mm long of dia 15mm complete.

S&F 75 mm PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors complete

S&F 110mm PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors complete

M&L PVC (SWR) pipes, 110 mm bore, single socketed pipe in any length with rubber ring joints fixed to wall complete

M&L PVC (SWR) pipes, 75 mm bore, single socketed pipe in any length with rubber ring joints fixed to wall complete

S&F 110mm PVC (SWR) junction single, (Single T, 'Y' type) equal or unequal complete.

S&F 75mm PVC (SWR) junction single, (Single, 'Y' type T) equal or unequal complete.

M&L PVC (SWR) bends door suitable for 75mm Bore pipe fixed complete.

M&L PVC (SWR) bends door suitable for 110mm bore pipe fixed complete.

M&L PVC (SWR) bends with access door suitable for 75mm Bore pipe fixed complete.

M&L PVC (SWR) bends with access door suitable for 110mm bore pipe fixed complete.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal, dia 75mm complete.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal, dia 110mm complete.

S&F PVC (SWR) vent cowl 100mm dia complete

S&F 110 mm PVC (SWR) 'P’ trap complete

S&F 110mm PVC (SWR) WC connector with lip ring complete.

S&F 110mm PVC (SWR) WC connector bent type to fit WC outlet complete.

M&L for 75mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia SWG pipe complete.

M&L Salt Glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches and jointed and testing complete.

M&L for Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe complete.

M&L in repair for GI tubing light grade fixed on wall/pole of the Size 50 mm complete

M&L in repair for GI tubing light grade laid in trenches/under road of the Size 50 mm complete

M&L GI tubing light grade fixed on wall/pole of the Size 50 mm complete

M&L GI tubing light grade laid in trenches/under road of the Size 50 mm complete.

S&F vitreous china wash down water closet pan (pedestal pettern) white including white plastic water closet seat and back with flat bottum and cover mild steel chromium plated and aluminium anodised hinging device (excluding flaushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding complete.

S&F PVC valveless 10lts capacity syphonic action type flushing cistern low level, white with inlet, ball valve float and handle including brackets and 32 mm dia polyethylene waste pipe complete

M&L for Vitreous china wash hand basin white flat back 550 x 400 mm with pedestal of standard size including chromium plated brass waste coupling, waste pipe, vulcanite plug with ring, pillar taps, PVC connection of suitable length, brackets and cutting for & pinning in ends of brackets etc complete.

S&F Low density polyethylene (LDPE) pipes of 32mm dia of pressure rating 6 kgf/sq. Cm complete

S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete

S&F brass CP hand spray (health faucet) for EWC including bracket and 1.5m long connection pipe complete

M&L for soap dish, vitreous china white, fixed to plugs with chromium plated brass screws complete

S&F Toilet paper holder, vitreous China, box type complete

M&L for applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre (Paving bitumin) complete.

S&F Steel tubular swaged Pole complete with cast iron base plate,final taper plug,bolts,nuts & screws as specified type 410 SP-31 9.0 Mtr long complete.

Supply, Laying, jointing and testing for 10sqmm 2 core electric under ground LT cable PVC/XLPE insulated armoured aluminium conductor cable 1100 volts grade in trenches ducts, pipe on walls, poles complete

Supply, Laying, jointing and testing for 16 sqmm 4 core electric under ground LT cable PVC/XLPE insulated armoured aluminium conductor cable 1100 volts grade in trenches ducts, pipe on walls, poles complete.

S&F LED Street light fitting 90 watt 230 volt AC out door type with high pressure die cast aluminium housing and heat resistant with driver lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete

Taking down carefully of existing old unsv light of any capacity and make etc complete.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site complete.

M&L for concealed point wiring with 1.5Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694 & color code in conduit system of wiring, drawn in & including medium grade PVC conduit 25mm dia concealed, including cutting chases, finising of slote by making good to the existing surface of the wall & touching with the existing colour of wall, sunk in pressed steel terminal boxes of required size not less than 3.0mm thick factory made and factory painted with top cover 3.0 mm thick plastic laminated sheet & fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit etc for One light/fan/bell point controlled by one switch 6 Amp one way complete

S&F switch piano flush type single pole, one way 6amp complete

S&F TPN 63 Amps 10 KA rupturing capacity complete.

S&F MCB DB SPN 4 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs / Isolators / RCCBs etc complete

S&F in replacement TPN 4 Way MCB DB factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc complete

S&F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 230 volts ISI marked complete.

M&L for earthing with galvanised steel earth plate electrode 60 cm X 60 cm X 6.0 mm burried directly in ground level with top edge of earth plate at a depth not less than 1.5 m below ground level connected to and including galvanised iron steel wire 4mm dia as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No. 3 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, cast iron cover with lifting handle, funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 40 mm bore light grade 7.5 m long test point etc complete.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6.0 mm burried directly in ground level with top edge of earth plate at a depth not less than 1.5 m below ground level connected to and including galvanised iron strip 25 X 4 mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No. 5 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, cast iron cover with lifting handle, funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 40 mm bore light grade 7.5 m long test point etc complete.

M&L for sub main wiring concealed conduit using two single core 2.5 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly including 2.5 Sqmm earth wire, PVC insulated & unsheathed complete.

S&F MCB SP 5 to 32 Amp, amp rating 240V, 10KA 'C' curve of poles and current carrying capacity in the MCB DB with connection testing and commissioning complete.

S&F 7W LED Bulb Including lamp holder and System Efficacy should be > 85 lm/ W. PF > 0.9, The Lamp Should have Cool Day light Color temp of 6500K, lumen output >600 lm. complete

S&F 4' 18W LED Tube With Batten with system lumen output of 1800 lumens. System Efficacy should be > 115lm/ W. The Luminaire Should have Cool Daylight Color temp of 6500K & CRI>80. Life 40K burning hrs with 70% lumen maintenace. PF>0.95 Surge Protecton of 3KV. All the Photometrical & Electrical parametrs must be supported by LM79-08 test report from NABL Accridiated LAB OR UL, R9 Value > 0. Lamp starting time is not more than 1 Sec. The LED tube light conforms to applicable IS complete

S&F MCB SPN 32 Amp 240V, 10KA 'C' curve of poles and current carrying capacity in the MCB DB with connection testing and commissioning complete.

S&F Exhaust fan 250 mm sweep Ventilator 1250 RPM with minimum airflow/air delivery 720 Cmh, 06 blades, light weight, rust proof body & blades, self opening louvers for protection from birds & rain water, IP-55, 230 Volt AC supply, rated power input not more that 45watt, connecting up including provison of cable from ceiling rose to fan complete

S&F wall security light LED type 25 watt with GI pipe 40mm dia light grade bend 1.2 mtr and fixing on wall/pole with clamp of FI 25 x 6mm with suitable nut & bolt complete

S&F Automatic street light switch of rating 5-8 KW in three phase using nature sensor for automatic switching "ON/OFF" of street lighting based on lux level of natural lgiht along with 20 Amps three pole contactor, MCB 63 Amps three pole with support terminals prewired with PVC insulated 16 sqmm multistrand copper wire enclosed/housed in pole wall mounted enclosure made of rust proof, shock proof, termite proof & dust proof, FR grade special moulded compound conforming to IP-54 similar to Model SWADEEP - 02 EC 5 KW 3P of Make "Nature Switch" (Kakatiya Energy systems Pvt Ltd) complete.

S&F street light box of PVC similar to make sintex consisting of 01 No MCB 10 Amps, 10 KA capacity (3 phase and neutral) including aluminium strip bus bar for incoming and outgoing cable with necessary connection duly fixed on the pole with FI 25x5mm of MS clamp with suitable nut bolts etc. complete.

M&L for sigle core copper conductor cable of size 1.0 sqmm for junction box to street light fitting complete

S&F LED Bay Light 100 Watt high lumen efficiancy made of die cast aluminium housing with 10KV SPD & Lens embedded PC cover IP 66 protection complete

S&F LED Flood Light 150 Watt highly efficient made of pressure die cast aluminium housing suitable lens and toughened glass IP 66 protection complete

Dagli Engineers