LED Lamp 12 watt, B22 Inverter type with battery backup, operating voltage Range 230 volt, 50Hz. Make: Crompton/Polycab/Orient/Philips/Havells/Halonix/Surya/Bajaj/Wipro

Special Eligibility Criteria

1. 1

   Offers from make : Crompton/Polycab/Orient/Philips/Havells/Halonix/Surya/Bajaj/Wipro shall only be considered.
2. 2

   Earnest Money Deposit (EMD):- (i) EMD:- Firm shall submit EMD amount @2% of the estimated value of the tender rounded off to nearest higher Rs 10/-. Please read carefully Correction Slip No. 001 of SECR General Tender Conditions- 2019 regarding Earnest Money Deposit which is applicable in this case. (ii) Please note that submission of EMD is exempted only to those firms who are registered with UDYAM for tendered item / Indian Ordinance Factories/Other Railways and Government Departments/PSUs owned by Ministry of Railways and PSUs for the group of items that are manufactured by them. The Firm registered with PCMM, South East Central Railway/ Bilaspur for the trade group of the tendered item shall also be exempted for submission of Earnest Money Deposit according to the monetary limit of registration. Firm shall clearly indicate their registration number along with monetary limit of registration, if any. Tenderers must upload/submit valid documents for the exemption of EMD along with their bid. Note: If any tenderer neither submit EMD nor uploaded valid documents for exemption of EMD, then their offer will be summarily rejected.
3. 3

   Traders must enclose tender specific authorization from the OEM along with the offer.Bidder to quote with Bid specific authorization directly from OEM otherwise offer will be summarily rejected without any back reference and no representation will be entertained. The OEM's authorization certificate should be on Company's letter head and must contain the full name, designation, active e-Mail address & Mobile number of the authorized signatory along with company's stamp. Without these the authorization certificate from OEM will not be considered as valid and offer will be summarily rejected without any back reference and no representation will be entertained. Buyer can seek the authentication of valid authorization certificate from OEM, if required.

   Document requiredConfirmation required
4. 4

   [a]Tenderer with satisfactory past performance for the tendered item (with same/ equivalent drawing/specification) within last 3 years for minimum 20 percent of the tendered quantity against a single order to any Zonal railway or railway Pus shall only be eligible for full/bulk order. Other sources may be considered for developmental order, provided the firm submits documentary proof in support of their credentials/satisfactory performance. [b]All other offers can be considered only for developmental order upto 20 percent of the net procurable quantity provided tenderer is a manufacture or registered with any of the Zonal Railways/PU/CORE or MSE firm for the tendered item [Or for the item having same description, but of different sizes/ratings/capacities subject to their rate being lower than the rate of the lowest bidder eligible for bulk order. [c] The onus of submission of requisite documents (such as copies of Receipt note for stock items, receipt & acceptance for Non Stock items, capacity & capability credential, M&P required for manufacturing tendered item, T&p, Technical manpower, in house testing facilities, MSE credentials, financial credential PAN no/lrcc etc.) along with their e-offer regarding 'Bulk order' or 'Developmental order' lies with the tenderer. In case the tender do not submit the requisite documents as detailed above along with their e-offer, the tender will be decided on the basis of their past supp]y performance records as available with SECR[if any]. [d]In case tenderer participate as an authorized agent, then the performance as required above shall be that of the Principal, authorizing the agent. lt may so happen that the agent has credentials of past supply for a different Principal but this will not be considered as performance for placing bulk order in case of change of Principal. (e)For past performance firm should attach proof of supply signed by either purchaser, consigner, inspector nominated by purchaser( should not be firm's representative). For this purpose receipt note, inspection certificate, CRAC, receipted challan, work completion certificate etc. should be attached. Proof of supply should clearly indicate quantity supplied and date of supply. Only copy of purchase order, GeM contract, self signed tax invoice, self made performance statement will not establish that supply has been completed

   Document requiredConfirmation required

Check List

1. 1

   Offers with conditional approval by vendor approving agencies will be summarily rejected. bidders must ensure that they have got their prototypes, gauges etc. approved for tendered item. after placement of order firms request for DP extension on such grounds will not be considered and PO will be cancelled.
2. 2

   It is certified that I as a bidder had gone through the tendered quantity, I understand my Actual annual production capacity and I understand my annual production capacity as per UVAM in ireps. I had considered these factors while quoting the bid quantity.

Commercial-Compliance

1. 1

   Purchase Preference to MSEs:- Micro and Small Enterprises who want to avail benefits under MSE policy are advised to submit UDYAM certificate only. Certificates such as NSIC, DIC, UAM will not be considered and firm will be treated as non MSE firm. (Authority : Railway Board letter No.2022/RS(G)/363/1 dtd. 21.09.2022). If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprise (in percent of order value) with further breakup of MSE owned by SC/ST. (Information will be provided in % terms with 6 fields; Micro owned by SC, Micro owned by ST, Micro owned by Others, Small industry owned by SC, Small industry owned by ST, Small industry owned by Others) .

   Confirmation required
2. 2

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Firms are expected to quote for quantity not less than 50% of tendered quantity. Offers for a quantity less than 50% of tendered quantity will be considered unresponsive and will be summarily rejected.