Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹8.5 L+₹1.6 L (23.6%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
Refer Docs
EMD Value
₹22,000
Closing Date
19 Sept 2020, 6:00 pmClosed
GE SAMBA
GE SAMBA
REPAIR REWIRING MAINTENANCE OF INTERNAL ELECTRIFICATION FITTINGS FIXTURES ACCESSORIES AND ALLIED WORK OF OTM MD ACCN UNDER AOR OF GE SAMBA
2020_MES_371047_1
GE/SMB/T-28/2020-21
Open Tender
Civil Works
Item Rate
180 days
Samba
CLASS E CAT b i
8 documents required · 8 mandatory
₹500
Yes
GE SAMBA
₹22,000
Yes
24 Sept 2020
21 Aug 2020
21 Sept 2020
21 Aug 2020
19 Sept 2020
7 Sept 2020
21 Aug 2020 - 24 Aug 2020
Amount
Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) from PVC/matelic conduit,on surface wiring, on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. by unscrewing carefully from boards etc complete all as specfied and directed.
M & L for point wiring for one light/one fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)(Make of 1.5 sqmm copper wire:Grandlay, L&T and Plaza, PVC conduit Make: Finolex,Plaza/Bajaj).
All as per srl item No 2 above but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
All as per srl item No 2 above but for 3 pin 5 amps switch socket independent board complete all as specified and directed.
All as per srl item No 2 above but for call bell point complete all as specified and directed.
M & L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green)(Make of 2.5 sqmm copper wire:Grandlay, L&T and Plaza, PVC conduit Make: Finolex,Plaza/Bajaj).
S & F for switch piano flush type one way 5 amps SP complete all as specified and directed, make : Havells (REO) or technocommerically equivalent make of cona /SSK .
S & F socket outlet 3 pin 5 amps flush type complete all as specified and directed, make : Havells (REO) or technocommerically equivalent make of cona /SSK .
S & F for switch socket combination 2 in 1 , outlet 5 pin 5 amps multipurpose complete all as specified and directed,make : Havells (REO) or technocommerically equivalent make of cona /SSK .
S & F switch socket multipurpose 2 in 1, 6 pin 5 and 15 amps controlled by one switch flush type universal ,make : Havells (REO) or technocommerically equivalent make of cona /SSK .
S & F for lamp holder/batton holder/angle holder insulated body(Metal ring) with back bakelite plate suitable for batten fittings,make : Havells (REO) or technocommerically equivalent make of cona /SSK .
M & L for ceiling rose 65 x 50mm three terminals complete all as specified and directed, make : Havells (REO) or technocommerically equivalent make of cona /SSK .
Supply and fixing ceiling fan regulator electronic type 5 stage speed variation,socket type is size, ISI marked complete all as specified and directed,,make : Havells (REO) or technocommerically equivalent make of cona /SSK .
Supply and fix bell push flush type 5 Amps complete all as specified and directed, make : Havells (Reo) or technocommercially equivalent in Cona/SSK .
Supply and fixing electric bell ding-dong AC 230 Volts single pole complete all as specifed and directed, make : Havells (Reo) or technocommercially equivalent in Cona/SSK
Supply and fixing of Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs. suitable for 10W IP-66 make : Havells ,cat part no :HEXAFT10WLED857SSYMBOPC or technocommerically equivalant make of Crompton/Philips/Halonix.
M & L for LED tube light fitting 20 watt, 230 volt,box type complete bipin holders, connector block and retro LED rod of 20 watt polycarbonate diffuser having high efficacy (single side connection) complete with all accessories internally pre wired batten(single side connection) and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed,LED tube rod ,make :Havells ,cat part no: PHOTONULTRA 2.01213T8SSTL 20 W LED 865SPC and LED tube light batten ,make :Havells ,cat part no: REGAL BATTEN T8UPTO 1X22WSSBSWH or technocommerically equivalant make of Crompton/Philips/Halonix. Note: (i) Contractor shall produce LM 79 & LM 80 test report form OEM owned NABL accredited laboraory. (ii) Contractor shall give gurantee of complete fitting/ fixtures for minimum of 2 years form the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of fittings/fixtures at no extra cost.
S & F of street light fitting made up of pressure die cast aluminium housing with IP65 protection of 25 watts LED Cool Daylight complete fitted on bldg with brackets made out of 32 mm dia GI pipe medium grade 1.5 in length long with suitable size of 2 nos MS flat clamps FI 25 x 3 mm including nuts,bolts including connecting up with PVC copper conductor wire 1.5 sqmm s/c from security light to ceiling rose etc, complete all as specified and directed,make: Crompton ,cat part no : LSTS-25-CDL-M or technocommerically equivalant make of /Philips/Halonix/Havells. Note: (i) Contractor shall produce LM 79 & LM 80 test report form OEM owned NABL accredited laboraory. (ii) Contractor shall give gurantee of complete fitting/ fixtures for minimum of 2 years form the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of fittings/fixtures at no extra cost. (iv) Contractor shall arrange 70% material at site for approval of GE before incorporation in the work.
Supply and fixing sheet metal enclousre for TPN DBs when MCB to be used single door powder coated factory made flush fixed complete with 200 amps rated bus bar 415 volts, three phase 4 ways complete all as specified and directed,Make:Legrand or technocommerically equivalant make of ABB/Siemens. (Note: MCBs shall be measure and paid seprately).
Supply and fixing sheet metal enclousre for DBs when MCB to be used double door powder coated factory made flush fixed complete with 200 amps rated bus bar 240 volts single phase 12 ways complete all as specified and directed,Make:Legrand or technocommerically equivalant make of ABB/Siemens. (Note: MCBs shall be measure and paid seprately).
Supply and fixing sheet metal enclousre for DBs when MCB to be used double door powder coated factory made flush fixed complete with 200 amps rated bus bar 240 volts single phase 08 ways complete all as specified and directed,Make:Legrand or technocommerically equivalant make of ABB/Siemens. (Note: MCBs shall be measure and paid seprately).
Supply and fixing sheet metal enclousre for DBs when MCB to be used double door powder coated factory made flush fixed complete with 200 amps rated bus bar 240 volts single phase 04 ways complete all as specified and directed,Make:Legrand or technocommerically equivalant make of ABB/Siemens. (Note: MCBs shall be measure and paid seprately).
S & F for MCB SP 6 to 32 amps 240 Volt 'B' series complete all as specified and as directed,Make:Legrand or technocommerically equivalant make of ABB/Siemens.
S & F for MCB SPN 6 to 32 amps 240 Volt 'B' series complete all as specified and as directed,Make:Legrand or technocommerically equivalant make of ABB/Siemens.
Taking down the unservicable /brunt sub main wiring from wooden batten and M & L for submain wiring in and including PVC conduit 1.8 mm thick ,20 mm dia with two run of PVC insulated, unsheathed multistranded copper conductor of 6 sqmm(FRLS) and one run of PVC insulated,unsheathed multistranded copper conductor 6 sqmm (green in colour) for earth continuity conductor and connected to common earth dolly with thimble etc, complete all as specified and directed. (Two run of 6 sqmm plus one run 6 sqmm of earth wire will be measured as 1RM) Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green)(Make of 6 sqmm copper wire: Havells or technocommerically equivalant make of Grandlay/Finolex.
M & L earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore medium grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).
S & F of sheet metal enclosures distribution boards, double door ,VTPN, 415 volts 4 ways (one incoming three phase & twelve out goings single phase )for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 25 KA=01 NO (for incoming ) (b) MCB SP 06- 40 amps = 12 Nos (for outgoings) . ( Note :- (i)The DB shall be VTPN series of Make : Schneider or technocommerically equivalent make of L&T/ ABB/legrand . (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble properly crimped.(iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost .
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular soild conductor of size 16 sqmm complete all as specified and directed.
Taking down old /unserviceable light fittings any type and rating and supply and fixing of Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly,energy efficient suitable for 18 W LED 6000 K,make : Havells,cat part no: LHEXBLP7PN1W018,or technocommerically equivalant make of Crompton/Philips/Halonix. Note: (i) Contractor shall produce LM 79 & LM 80 test report form OEM owned NABL accredited laboraory. (ii) Contractor shall give gurantee of complete fitting/ fixtures for minimum of 2 years form the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of fittings/fixtures at no extra cost.
Supply and fixing LED Edge light luminaise suitable for Arnstrong/ grid ceiling complete for less ceiling applications suitable for 36 watt, complete all as specified and directed of Make : Havells, Cat Part No : STRA TO 2X2PLR36W LED 857 MOD or techno commercially equivalent Crompton/Phillips.
Vishav Karma Refrigeration and Electric Work
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .