Special repairs to Bldg No. P-125 and Bathroom of bldg. No P-369 and 378 and Provision of certain sanctioned works at Dholewal Mil Complex under GE Ludhiana

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) complete all as specified and directed.

M&L 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded crushed stone aggregate) as in floors finished even & fair complete all as specified and directed.

M&L for machine cut kota stone slab flooring 16-18 mm thick laid over and including screed bed 15 mm thick in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and polishing complete all as specified and directed.

All as per item No 03 above but in one piece as in riser ,treads of stair,skirting / dado laid over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M&L chequerred cement concrete tiles 30cmx30 cm x25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F steel rolling shutters thickness of laths 1.00mm , without ball bearing, as specified including top cover, anchoring rod, hasp and staple, guide channels, stopper, handles, lock plate,sliding lock-2No. on each rolling shutter, 2 No. of bracket plate on each rolling shutter,, u-clamp, pulley as per requirement and erected in position as indicated, complete but gear operated type with bevel gear box and crank handle complete complete all as specified and directed.

S&F Ball bearing for rolling shutters ISI marked as approved complete all as specified and directed.

S&F helical wire spring with new 8 gauge helical wire spring complete all as specified and directed.

M&L Granite slab 18-20 mm thick (table rubbed and polished) as in in steps, jambs,pillars, window-cill, cooking platform over and including 15mm thick bedding layer in cement mortar (1:4) in and pointed with white or colour cement (1:2) using marble dust with admixture to match the shade of granite including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

S&F Gl frame work 605 x 605mm grid for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including dismantling wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs& MS / Aluminium grid, any thickness, including cover fillets complete all as specified and directed.

S&F Non asbestos fibre cement building boards 7- 8mm fixed or laid/ inserted to GI framework with screws in ceiling flat or sloping complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50sqm but not exceeding 4.00 sqm each and removing from site complete all as specified and directed.

S&F Anodised aluminium powder coated frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each Shutter, hinges, anodised aluminium snap beading including necessary aluminium builders hardware, screws etc. complete all as specified and directed.

S&F steel window & ventilator box type ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 Four Nos for each window including following fitting welded to frame shutter : (a) Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Fabrication & fixing arrangement . Note : Glass, guard bar and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

All as per item No 18 but fixing with wire mesh complete all as specified and directed. (Note : Wire mesh and painting shall be paid seperately).

S&F mild steel framed work such as grills, framed guard bars, grating and like confirming to Fe-410-O or Fe-310-O complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm each pane complete all as specified and directed.

S&F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 10mm thick on roof surface in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement including taking down existing treatment on roof surface complete all as specified and directed. (Note : Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule) .

M&L for Priming surfaces and applying normal treatment (for moderate conditions) using bitumen primer @ .30 Kg/Sqm applied hot complete all as specified and directed.

M&L providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/Sqm ) laid by torched application complete all as specified & directed.

BLANK

M&L for applying a two coats of aluminium paint over APP based polymeric membrane complete all as specified and directed.

Supply only Integral water proofing compound ISI marked as approved complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L Framed work as in cooler stand, chowkhat for cup-board , doors or gates of angle or other section drilled for fixing and hanging or sliding with and including either hooks and hinges or steel hangingdoor fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing (Fe410-W Gde E-250 Quality-A) complete all as specified and directed.

M&L Pre-laminated particle board thickness 18/19mm, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with steel frame work including dismantling boarding any description and in any position fixed with nails complete all as specified and directed.

M&L Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 100mm long complete all as specified and directed.

S&F Continuous (piano) hinges 30mm width of flaps (when open) ,mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F 200 mm aluminium anodised tower bolts of extruded section fixed with screw complete all as specified and directed.

M&L for Dubbing out in cement plaster (1:4) of average 10mm thick on irregular face of walls complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L 12mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finsihed the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 on wall even and fair without using extra cement complete all as specified and directed.

M&L for Post Constructional Antitermite Treatment by treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L Providing, plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L 40mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in floorings finished even and smooth with using extra cement complete all as specified and directed.

S&F 38mm width of strip glass dividing strips, 3mm thick and inserted in position to confirm to design complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc. 0.11 Sqm but n.exc 0.18 Sqm fixed in neat cement slurry and pointed in white or coloured cement with pigment to match over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L glazed ceramic coloured tiles 450mm x 300mm x 6 to 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar (1:3) including necessary cutting as per site requirement complete all as specified and directed.

Taking down chowkats or frames(without taking off shutters from the frame) area n.exc 1.5 Sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling & fixing in opening as per specification and drawing complete all as specified and directed.

S&F factory made soilid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed.

S&F for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc complete all as specified and directed. Sheet thickness 1.25mm.

M&L cement concrete 1:3:6 type Co (using 12.5 mm thick stone aggregate) as filled in door frame chamfered angles, Hold Fast and throating, complete all as specified and directed.

S&F plain framed pannelled door shutters 35mm thick (two layer panel) with lock rail and panel of 9mm BWP commercial ply or 12mm verneering on both faces. The size of rail and stile as per IS-1003, SSR Pt-I kiln seasoned and chemically treated complete all as specified and directed. Type of wood as approved.

S&F three track powder coated aluminium sliding type window with frame without sash bars,aluminium section weighing not less than 0.55kg/RM including necessary jointing cleats,glazing clips,rubber packing anodised aluminium snap beading screws,etc,Two shutter to be fitted with 5 to 6 mm thick tinted glass & one shutter to be fitted with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aprture 1.40mm guide channel at top and bottom with suitable roller including necessary aluminium builders hardware( locking arrangement), complete all as specified and directed. Note:- window frame & shutters including glass & wire mess will be measured as one unit.

M&L for preparation of new or previously untreated wooden surface of any description exc.10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in Aluminium handles, cast type, anodised 150mm long completed all as specified and directed.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified and directed.

S&F in Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 250 mm complete all as specified and directed.

M&L rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling complete all as specified and directed.

M&L preparing newly plastered or pointed surface of wall and applying three coats of white wash complete all as specified and directed.

M&L preparation of newly plastered or pointed surface of walls and applying two coat of cement base paint complete all as specified and directed.

M&L preparing of new surface of plaster and applying three coats of white wash on ceiling complete all as specified and directed.

S&F in repairs urinal spreader of CP any colour for fixing with 15 mm dia pipe. complete all as specified and directed.

S&F in repairs Vitreous china bowl urinal flat back size 465x355x265mm white (minimum) with grating and union for discharge pipe(excluding flushing cistern) but including urinal pipe etc complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat, back of size 550mm x 400mm including waste coupling and waste pipe complete all as specified and directed.

S&F in repairs Squatting pattern Water closet, Orissa pattern of vitreous china Size 580x440mm wide with integral foot rest etc complete all as specified and directed.

S&F in replacement vitreous china one piece toilet seat including seat cover, flushing assembly & connection to existing out joint pipe, Jet Spray including making good to floor etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making good to floor etc complete all as specified and directed.

S&F in repairs plastic water closet seat cover of White colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe 1.25 metre long flexible tube and ABS wall hook including making connections and fixed to in position etc complete all as specified and directed.

S&F in repairs PVC low level flushing cistern syphonic action type white with inlet ball valve, handle including brackets 10 ltrs capacity including flush pipe etc complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 600 mm etc complete all as specified and directed.

S&F in repairs Bib taps, chromium plated cast copper alloy with crutch or butterfly handle fancy type, screwed down , screwed for iron pipe or for brass ferrule and fixed in iron pipe of 15 mm bore complete all as specified and directed.

S&F in repairs pillar tap, cast copper alloy fancy type chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipe etc complete all as specified and directed.

S&F in repairs stop valves/angle valve 15mm bore , cast copper alloy fancy type, chromium plated ,screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

S&F in repairs stop valves/angle valve 15mm bore cromium plated , cast copper alloy fency type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed (concealed type) etc complete all as specified and directed.

S&F in repairs chromium plated shower roses with or without swivel joints 125 mm size including fixing to steel pipe complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia D-type, 60cm long between flange complete all as specified and directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws in repair complete all as specified and directed.

S&F 15mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing 15mm bore and connections complete all as specified and directed.

S&F 20mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing 20mm bore and connections complete all as specified and directed.

S&F rotational moulded polythylene water storage tanks triple layered of capacity 1000 ltr (cylindrical vertical with closed top) triple layer hoisted and fixed in position including nipple suitable for water tank S&F ball Brass valves high pressure with polythylene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 20mm dia including dismantling existing tank and ball brass valve complete all as specified and directed.

S&F in repairs stop valves 20mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete fixed complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) soil, waste and vent pipe, in any length with rubber joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints fixed to wall complete all as specified and directed.

S&F in repairs 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repairs PVC (SWR) 75mm dia bend of any radius complete all as specified and directed.

S&F in repairs PVC (SWR) 110mm dia bend of any radius complete all as specified and directed.

S&F in repairs 75mm SWR vent cowls complete all as specified and directed.

S&F in repairs 110 mm SWR vent cowls complete all as specified and directed.

S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC P-Traps for water closets of 110mm bore complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L rendering 15mm thick on walls as well as on sunken floor in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified & directed. (Note : Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule).

M&L for cement concrete 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate)as in foundation filling and mass concrete complete all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

All as per item No 67 above but except bricks complete all as specified and directed (Old bricks shallbe reused).

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

BLANK

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6 mtr mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L Hardcore of broken bricks of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC 1:2:4, type B-2 with 40 mm graded stone aggregate as in flooring finished even and fair complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded crushed stone aggregate) as in plinth protection finished even and smooth (without using extra cement) complete all as specified and directed.

M&L 60 mm thick interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-35 Grade as approved by GE laid in flooring and joints filled/broomed with fine sand complete all as specified and directed.

M&L for Sand filling under floor , interlocking tiles complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L, two coats of synthetic enamel paint to untreated surfaces of steel over 10cm width or girth not otherwise described over a coat of red oxide primer after preparation complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in soft and loose soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in foundation filling of posts & struts including form work complete all as specified and directed.

S&F 2 mm fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with self tapping screw complete all as specified and directed.

M&L Endura ceramic tiles of size 300mmx300mmx10mm thick laid in floors etc., set and jointed in neat cement slurry and pointed in grey or coloured cement and pigment to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),complete all as specified and directed.

M&L formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors and roofs exc. 10 cm but n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar works for rough finished surfaces of concrete complete all as specified and directed.

M&L Brick work with sub class ‘B’ brick in CM 1:3 straight or curved on plan to any radius in half brick thick wall complete all as specified and directed.

M&L for Reinforced cement concrete type B0 (1:2:4) (Nominal Mix) using 12.5 mm graded crushed stone aggregate as in slabs , supported on walls, beams and columns in floors , roofs, landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in drain covers and the like set in cement mortar (1:4) duly placed on manholes inclusive of necessary form work complete all as specified and directed. Note: Reinforcement bars shall be measured and paid separately.

M&L for cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in foundation bed/mass concrete complete all as specified and directed.

M&L for Drilling bore hole 200mm dia upto 60 mtr depth by boring in soft/ hard soil by mechnical method including removing of excavated/ drilled material to a distance n.exc 50m complete all as specified and directed. Depth of bore shall be upto 30 feet in seny strata.

Add or Deduct for everyone metre of drilling bore hole 200mm dia complete all as specified and directed (this item is for adjustment against item No 123).

M&L for PVC pipe 150mm dia perforated/ slotted pipe of 1st class with all necessary fitting complete all as specified and directed.

M&L for filling coarse sand in trenches laid in layers, complete all as specified and directed.

M&L for gravel packing incl jute as filter media 4mm to 6mm size around the PVC pipe complete all as specified and directed.

M&L for filling of gravel in trenches of size 6mm to 10mm complete all as specified and directed.

M&L for filling of gravel in trenches of size 2mm to 4mm complete all as specified and directed.

M&L 300 mm bore holes in normal available starta upto 50 mtr depth complete all as specified and directed.

S&F PVC pipe 150 mm dia class 'A' including all necessary fittings complete all as specified and directed.

M&L gravel packing as in filter media of size 12.5 mm size around PVC pipe in pit complete all as specified and directed.

M&L gravel packing as in filter media of size 3 mm to 5 mm size around PVC pipe in pit complete all as specified and directed.

M&L for coarse sand filling around PVC pipe in pit complete all as specified and directed.

Exacavating over areas , n exc. 1.50 mtr deep and getting out in soft/loose soil complete all as specified and directed.

Exacavating over areas , exc. 1.50 mtr but n exc. 3.00 mtr deep and getting out in soft/loose soil complete all as specified and directed.

Exacavating over areas , exc. 3.00 mtr but n exc. 4.50 mtr deep and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC type D2 , 1:4:8 using 40 mm graded crushed stone aggregate as in foundation and mass concrete complete all as specified and directed.

M&L for formwork to rough finished flat surfaces of concrete foundations, footings , bases of coulmns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams ; and other similar works; vertica or to batter complete all as specified and directed.

M&L for cement concrete nominal mix ,type B0 1:2:4 (20 mm graded crushed stone aggregate) foundatios, including rafts, footings , foundation beams, plinth beams, bases for coulmns etc and all other similar works complete all as specified and directed.

M&L formwork to fair finished curved surfaces faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

M&L for cement concrete nominal mix, type B0 1:2:4 (20 mm graded crushed stone aggregate) for walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses and all other similar works complete all as specified and directed.

M&L formwork to soffits of floor or roof beams, beam haunching ,grider, bressumber, lintels,cantilever ,sleves including supports ,over hang etc also splay between floor and beams to rough finish surface of concrete flat complete all as specified and directed.

M&L for cement concrete nominal mix, Type B0 1:2:4 (20 mm graded crushed stone aggregate) as in beams, cantileveres, bressummers, lintels over 1.50 mtr span and all other similar works complete all as specified and directed.

M&L for TMT bars10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and direceted.

M&L for TMT bars 6 to 8mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

All as per Item No-145 above but 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified & directed.

M&L rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed.

Returning, filling in,including spreading,levelling,watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified & directed.

Removing excavated material to a distance exc. 250m & n. exc. 500m and deposting where directed at a level n exc. 1.5 mtr above the starting point complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not other described and applying two coats of synthetic enamel paint (ordinary tint) (each coat) over a coat of primer red oxide (zinc chrome) complete all as specified and directed.

Excavating in trenches n.exc. 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits , manholes, pier holes etc. n.exc 10sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

M&L for Plain cement concrete, type C-2, 1:3:6 using 40 mm graded crushed stone aggregate as in foundation of drain, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (Old size brick) straight or curved on plan exc 6mtr mean radius built in cement mortar 1:4 and external face of brick work pointed flush in the same mortar as the work proceeds, complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone concrete) as in surface channels and drains finished even and fair complete all as specified and directed.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

M&L for Flush pointing to brick walls in cement and sand mortar (1:4) complete all as specified and directed.

M&L for cement concrete nominal mix, type B0, 1:2:4 (20 mm graded crushed stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like and all other similar works complete all as specified and directed.

S&F for Reinforced concrete pipes 250 mm bore , class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L for PCC, type B0 (1:2:4) using 12.5mm graded crushed stone aggregate as in coping including necessary form work complete all as specified and directed.

S&F for Cement concrete C-2, 1:3:6 bed to drain pipes 250mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested, complete all as specified and directed.

Taking down carefully the point wiring (light, Fan, socket or power) complete, (incl fittings such as switches, sockets any type, ceiling roses, pandents, light fittings, etc for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. all as specified.

Taking down Ceiling fan/Wall fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed.

Refixing only ceiling fan/Wall fan and connecting up including provision sutiable of new down rod for ceiling fans,of cable from celling rose/ connector to fan incl painting complete all as specified and as directed

M&L for point wiring with PVC insulated and PVC sheathed cable with copper conductor single core size of 1.5 sqmm in and including PVC conduit ISI marked concealed in walls etc, for one light / fan / bell point controlled by one switch including earth contiunity wire PVC insulated sheathed 1.5 sqmm solid copper conductor cable connected to common earth dolly complete all as specified and as directed. :-

One light/fan/call bell point controlled by one, one way switch

One switch socket outlet point 5 Amps on independent board

One 3 Pin socket outlet , 5 Amps on the same board with other switch

All as per item No. 166 described here-in-before but with copper conductor cable FR LS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board complete all as specified and as directed

Supply and fix LED light fittings 2'x2', 36 W, 240V, 50Hz, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and as directed

S&F 20 watt LED tube lighting fixture complete all as specified and as directed

M&L Sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through new PVC rigid non metallic conduit including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified and as directed

Supply and fix sheet metal enclosure with socket plug top and SPN MCB 20Amp , 10kA, 50 Hz and enclosure with a two pin and earth plug and socket complete all as specified and as directed

Supply and fix for SPN MCB DB 8 ways with Volt, Double door type complete all as specified and directed.

S&F for MCB SPN 40 Amps, C-series complete all as specified and directed.

S&F for SP MCB 6-32 Amps C-series complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and as directed

Supply and Fix Switch Piano,Flush type single pole , one way 5 Amp complete all as specified and as directed.

Supply and Fix Socket outlet 3 pin, 5 A flush Piano,Flush type complete all as specified and as directed.

S&F switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified and as directed

M&L Socket outlet multi purpose 3 in 1, 6 pin, 5 & 15 Amps, flush type complete all as specified and as directed

Supply and fix fan step regulator, 120W, 1 module complete all as specified and as directed

M &L Earthing complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6, C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

Supply and fixing bldg security light fitting LED 35 W LED made up of pressure die cast aluminium housing with potted isolated driver and high power LED and indl lenses, oprating range- 90V to 340V AC. , IP66 with high power LED lamp including sec light bracket compete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2.0 core complete all as specified and as directed

Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed .

M & L Old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified and as directed

Supply & fixing for galvanised iron tubes of size 25mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed.

Boring of holes under road, pavement, hard standing by trenchless technique and necessary T&P for passing of LT/HT cables complete all as specified and directed.

S&F in repair energy saving bulk head luminaries with opal diffuse LED 10 watt complete prewired products must be made in India only connection and testing complete all as specified and as directed

Supply and fix for SPN MCB DB 4 ways with Volt, Double door type complete all as specified and directed.

Supply and fix for MCB SPN 6- 32 Amps, C-series complete all as specified and directed.

Supply and Fix Switch Socket combenation 2 in 1 outlet 5 pin, 6/16 A flush type complete all as specified and as directed

Taking down Exhaust fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed

Refixing only exhaust fan and connecting up including provision of cable from celling rose including painting & Minor repair complete all as specified and as directed

Taking down electric water heater Geyser with its accessories and keeping in safe custody for reuse at site and making good disturbed surface and refixing the same after painting at the location as directed and connecting up including all its accessories such as safety valve,thermostat,NRV ,supply and fixing of GI pipes of dia 20mm laying in wall making serviceable after fixing as specified and directed.

M&L for making hole using core drill suitable for exhaust fan and making good to all disturbed surfaces and matching the same with adjoining specifications omplete all as specified and as directed.

Supply and fix ceiling fan white colour complete with accessories 230V,1200mm sweep five star rated with brushless direct current motor (BLDC) complete all as speified and directed

Supply and fix for exhaust fan made of sturdy Engineering plastic complete with louvers shutter voltage 230V 50 HZ RPM 1200,copper winding of sweep 300mm complete all as specified and as directed

M&L Sub main wiring with PVC insulated cable copper conductor FRLS two single core 6 Sqmm drawn through Existing or new PVC rigid non metallic conduit including earth continuity FRLS copper conductor 6 Sqmm PVC insulated with green insulation complete all as specified and as directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through PVC casing caping and accessories and terminated in and including new sunk type pressed steel terminal switch boxes 1.6 mm thick with plastic laminated bakelite sheet top cover 3 mm thick make hylum fixed with nickel polished steel screws with washers and internal bend end caps etc complete in walls/ceiling/roof/etc including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor complete all as specified and as directed for the following :-

One light/Fan point controlled by one, one way switch.