PROVISION OF NON SKID CERAMIC TILE FLOORING AT NAVY CHILDREN SCHOOL IN BUILDING NO P 47B AT NSB AS AS TO EXISTING INBUILT CUPBOARDS IN BLDG NO P 47 A AND P 47 B AT NAVY CHILDREN SCHOOL NAUSENA BAUGH PROVISION OF APPROACH ROAD PAVED AREA AND DRAIN

Amount

Demolition of un-reinforced cement concrete in any floors and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to out side MD land complete all as specified and as directed.

M & L for 30 mm thick, PCC 1:2:4, Type B0, using (12.5mm graded aggregate) as in sub base of flooring complete all as specified and as directed.

Removing building materials etc (other than spoil) to out of MD land including loading and unloading at the destination complete all as specified and as directed. Note : One metric tonne shall mean ‘one load’ as given on Sl page No. 462 of SSR Part II [2010]

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over screed bed or bedding layer in cement mortar 1:6, 15 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over screed bed or bedding layer in cement mortar 1:6, 15 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for coloured glazed ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in skirting/dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over screed bed or bedding layer in cement mortar 1:4, 10 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

Complete removal of existing treatment on walls and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls including preparation of surfaces complete all as specified and as directed. Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

Taking down chowkats or frames not exceeding 1.5sq.m. each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4sqm each with shutters without taking off shutters from frame complete all as specified and as directed.

M&L for cutting holes in brick walls in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 and making good the surface as per existing surface finishing as required complete all as specified and as directed.

M&L for Providing Plain Cement Concrete Type B1 1:2:4 using 20mm graded aggregates in lintels upto 1.5m clear span, cills, steps; eismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of form work, complete all as specified and as directed.

S&F mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 410-O or Fe 310-O complete all as specified and as directed.

S & F Mild steel work in framed work such as grills, Framed guard bars, gratings/ cattle traps , ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S & F in Repairs 1.25 mm thick Galvanized Iron sheet with grade of coating 450 in wall cladding, steel gates, etc., cut to size, holes punched including fixing to MS clamps with necessary bolts and nuts complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish to outside the premises, and depositing serviceable materials where directed and leaving the work site clear of any plastering complete all as specified and as directed.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing newly plastered / untreated surfaces of internal walls, application of wall care putty (any number of coats required) and sand papering etc and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

Complete removal of existing treatment on walls, preparing surfaces of walls applying putty two coats and sand papering till obtaining smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

S & F 100 mm, 4 Levers, Brass Mortice Lock, vertical Type of Godrej make complete all as specified and as directed.

S & F 200 mm long [ ISI marked ] Mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and as directed.

S&F 125 mm long [ ISI marked ] medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

S & F 150 mm long Mild steel pressed handles, oval type, stove enameled black complete all as specified and as directed.

Supply and fix 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in hard / dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (by using 20mm graded granite stone aggregates) as in foundations, fillings and mass concrete complete all as specified and as directed.

S & F Mild steel work in wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shapes as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F mild steel work as in tubular trusses / purlins and tubular posts including special shaped washers etc. complete using butt welded tubes confrming to I.S.1161-1979 Grade St.-240 and painted one shop coat of zink chromate primer paint (including preparation of surface) at Contractor's work shop before fabrication complete all as specified and as directed.

S&F rolled mild steel plates (plain or chequered) channels, square cut or notched, forming holes, wiht out any attachment confirming to Fe 410 - S complete all as specified and as directed.

Supply and Fix Pre-painted galvalume aluminum zinc coating plain sheet of 0.50 mm thick[TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. MAKE : M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH / JINDAL

Supply and Fix Pre-painted galvalume aluminum zinc coating trapizoidal profile sheet of 0.50 mm thick[TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. MAKE : M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH, JINDAL

Surface Excavation not exceeding 30 Cm deep and averaging 27 Cm deep and getting out in Soft/ Loose soil / mud complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 100 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in flooring / hard standing finished even and fair complete all as specified and as directed.

M & L for Sand filling in floors or in foundations including watering and consolidation complete all as specified and as directed.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick, M-35 Grade finished with grey cement and pigment including 50mm thick sand cushion complete all as specified and as directed. Make : Ultra, Eurocon, Duracrete, Mehatab as approved by GE.

Removing Excavated soils exceeding 150 M and not exceeding 200 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

M & L for Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in hard/ dense soil complete all as specified and as directed.

M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete M 30 design mix in foundations including rafts, footings and mass concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete M 30 design mix in walls, retaining walls and the like complete all as specified and as directed.

M&L for Reinforced Cement Concrete M 30 design mix for slabs supported on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified and as directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Use and waste of Fair finished flat Form work to sides of concrete foundations, rafts, plinth beams and similar work, vertical or batter complete all as specified and as directed.

Use and waste of Fair finished flat Form work to faces of retaining walls, parapets, staircase railings and similar work, vertical or batter complete all as specified and as directed.

Use and waste of Fair finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200 mm thick complete all as specified and as directed.

M&L for Rendering 10 mm thick on brick or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required complete all as specified and as directed. Note: WPC shall be measured and paid separately.

Supply only Integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

Material and Labour for Walling of random rubble [ KONDALITE STONE], uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Removing Excavated soils exceeding 1.5 KM but not exceeding 5 KM and depositing where directed complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) in surface channels and drains complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in floors complete all as specified and as directed.

M&L for Reinforced Cement Concrete Type A1 1:11/2:3 (using 20 mm graded stone aggregate) for beams,lintels etc and the like complete all as specified and as directed.

Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Use and waste of Fair finished flat Form work to sides and soffits of lintels, shelves including supports etc. complete all as specified and as directed.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required complete all as specified and as directed. Note: WPC shall be measured and paid separately.

M & L for preparing the new plastered / untreated surfaces of walls/ ceilings and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer complete all as specified and as directed. Make : (i) Weather coat paint :Apex from Asian Paints / All Guard from Berger / Weather Shield Max Exterior Acrylic from ICI Dulux

Supply anf Fix in opening Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing complete all as specified and as directed.

S&F factory made solid PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for syles and plain colour PVC sheet for top and lock rail and bottom rail on either side and as gap insert for top rail & bottom rail:Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifications complete all as specified and as directed. Note for Item No. 64 & 65 : Make of PVC frame / shutter / ventilator shall be of make Sintex/ Nandi / Rajshri Plasti Wood.

M & L for Factory made PVC Ventilator made out of Multi Chamber PVC hallow section DWUF 405 (40 x 46 mm) as frame, 3 mm thick Pin headed glass fixed to the frame in the lower section using extruded PVC Section of 9 x 1.5 mm size GL 19 with EPDM gasket (SPL - 003) for both PVC sections. Ventilator center mullion shall be made up of DWUF - 406 upt to six floors complete all as specified and as directed. Make SINTEX / NANDI / RAJSHREE

S & F 300 mm long [ISI marked] Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed.

S & F 200 mm long [ISI marked] Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 100 mm long [ISI marked] Butt hinges, extruded brass, with mild steel hinge pin, bright polished type B 11 complete all as specified and as directed.

S & F 150 mm long [ISI marked] Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F 15mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

S & F 20mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S & F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size with 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including removing the existing Basin, pillar tap and brackets and fixing new brackets complete all as specified and as directed. Make :Pillar Tap : M/s Hindware / Orient / Seiko / Dripless Make : WHB : CERA / PARRYWARE / HINDWARE

S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as specified and as directed.

S & F Vitreous Ware wash down water closet (Pedestal), white (ETWC) and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets including PVC Flush pipe 32 mm dia., Plastic seat of same colour of WC, closed pattern with flat bottom, and cover and Mild steel chromium plated hinging device work up to 16th storey complete all as specified and as directed. Make of WC and Flushing cistern :M/s. Parry ware/ M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S & F Fancy type chromium plated 15 mm bore Stop valves, with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S & F PVC connections 15 mm bore with PTMT nuts of length 450 mm complete all as specified and as directed. MAKE : M/S PRAYAG, M/S POLY TUF

S &F 75mm bore PVC (SWR) soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make : Supreme / Prince / Finolex

S &F 110mm bore PVC (SWR) soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make : Supreme / Prince / Finolex

S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal, fixed complete all as specified and as directed. Make : Supreme / Prince / Finolex

M/L for PVC(SWR) Plain floor trap 75mm dia outlet with grating incl jointing with solvent cement fixed in cement concrete B1 (1:2:4) complete all as specified and as directed. Make : Supreme / Prince / Finolex

S & F in repairs Hand Shower, Health Faucet with 1m long flexible tube, wall hook, non return valve complete all as specified and as directed. Make: Cera / Hindware / Parryware

S&F in chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S & F Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm with Aluminium "T" section of size 38 x 25 x 1.50 mm thick for main runners, 25 x 25 x 1.5 mm thick for cross runners and angle of size 25 x 25 x 1.50 mm thick along the walls suspended with and including 4 mm dia., Galvanized mild steel wire (as in suspenders of ceiling members fixed in proper position) including providing and fixing Gypsum Board 12 mm thick in ceiling fixed with screws as per manufacturer's instructions and applying two coats of plastic emulsion paint over a coat of primer over two coats of putty including sand papering till obtaining smooth finish complete all as specified and as directed. Make of Gypsum board : Saint Gobain/ Gypsum India

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as specified and as directed.

M & L for 150 mm dia Salt Glazed stone ware drain pipes, grade "A", laid in trenches and jointed in cement mortar and tested complete all as specified and as directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm dia., of pipe complete all as specified and as directed.

Removing Excavated soils exceeding 50 M and not exceeding 100 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

M&L for point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore medium grade (ISI marked) concealed / surface fitted type including Flush type metal GI boxes for fixing modular type / MS sunken box for conventional type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch.

All as per item No. 95 above but for one 5Amps socket on independent board including 1. 5 Sqmm earth continuty FRLS Copper Cable comlete all as specified and as directed.

All as per item No. 95 above but with two runds of 4.0 Sqmm FRLS copper cable for one 15 Amps, geyser/AC/ Water cooler point including 4.0 Sq mm FRLS copper conductor cable for earth continuity conductor and connecting it to earth dolly complete all as specified and as directed. Note for item No. 95,96, & 97: Make of Cable : Finolex/Polycab/Plaza/Gloster/Harsh all are ISI marked and FRLS cables Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

S & F switch piano flush type single pole 5 Amps AC 240V, 50HZ, complete all as specified and as directed. Make : Anchor / Bajaj / Leader / Cona

S&F ceiling rose surface bakelite 65 X 50mm two to three terminals complete all as specified and as directed. Make : Cona / Anchor / Legrand

S&F switch socket combine 5A flush type AC 230V, 50 HZ complete all as specified and as directed. MAKE : ANCHOR, BAJAJ, LEADER AND CONA [ ALL ISI MARKED]

S&F switch combine 5A/15A flush type multi purpose AC 230V, 50 HZ complete all as specified and as directed. MAKE : ANCHOR, BAJAJ, LEADER AND CONA [ ALL ISI MARKED]

S&F LED tube light along with fixture,18W complete all as specified and as directed. Make : Havells Cat No LHEWEBP5IN1W020 for batten and suitable tube / Bajaj/Crompton/Philips

S & F LED Mirror Light " Linnet " 14 Watts including taking down existing FTL fittings of any type complete all as specified and as directed. Make:Surya cat no SLE mirror 14 watts / Crompton Cat Part No LCL-14-CDL / HPL Cat no. HLPT51510CW / Bajaj / Havells

S&F Exhaust fan 230/240 Volts AC single phase oscillating 300 mm sweep heavy duty with loures with specification of 1400 rpm, input watt-82W, current 0.35A, free airflow - 1950 cum/hour and noice level 45-50db complete all as specified and as directed. Make : Crompton Greaves / Bajaj / Usha

M & L for Sub main wiring with 2 runs of 4 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 4.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly complete all as specified and as directed. Note: Two runs 4 Sq.mm. cable, one run of 4 Sq.mm cable and one run of PVC conduit will be measured as one unit. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

S&F vertical Distribution Board, SPN, 4 Way, Double door complete all as specified and directed. Make : Indo Asian cat part No. 811805[Optipro] / Standard / Havells / HPL

S & F MCB SP 6 to 32 Amps, 240 Volts, C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811122 to 811129 / L&T / C&S / Schneider / Legrand

S & F MCB SPN 6 to 32 Amps, 240 Volts, C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811144 to 811151 / L&T / C&S / Schneider / Legrand

P SRINIVASA RAO

SATYAMEGHA ENGINEERS

K SATYANARAYANA ENTERPRISES

Sri Vayuputra Constructions

SREE VSM ENGINEERING

SRI SURYA PROJECTS