SLGAIIPDIV/CORE/eNIT_9/2025_26

Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite and sand stone), including removing, spreading or stacking the spoils, within a lead on 75m as directed. The item includs necessary trimming the sides of trenches , leveling , dressing and ramming the bottom, bailing out water as required complete.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water and ramming complete, including the cost of supply of sand.( payment to be made on measurement of finished quantity)

Single brick flat soling of picked Jhama bricks including ramming and dressing bed to proper level and filling joints with local sand

Cement Concrete with 30mm. down graded shingles excluding shuttering .

125 mm. thick with brickwork with 1st class bricks in cement mortar (1 : 4) in ground floor.

Brickwork with 1st class bricks in cement mortar(1:4) .

Earth work in filling in foundation trenches or plinth with good earth , in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete ( Payment to be made on the basis of measurement of finished quantity of work).

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints including throating, nosing and drip course, scaffolding /staging where necessary( ground floor). [excluding cost of chipping over concrete surface]

Neat cement punning about 1.5 mm. thick in wall dado,window, sills, floor, drain etc. NOTE - cement 0.152cum per 100 sqm

Supply of 225mm dia Class NP2 type RCC spun pipe for proposed outlet

Supply of 300mm dia Class NP2 type RCC spun pipe for proposed outlet

Supply of matching collar for 225mm dia Class NP2 type RCC spun pipe for porposed outlet

Labour for loading RCC spun pipe NP 2 into trucks carts etc at lifting points and unloading the materials at destination within a lead of 100m pipe/coller of dia 225-300 mm

Carriage of RC Pipes & collers over pucca road upto 5 km distance (a) Pipe/Coller of dia 225mm

Extra rate for carriage of RC pipes and collars over pucca road beyond 5kms upto any distance (for NP2) (a) Pipes and collars of 225mm dia.

Labour charges for laying fitting fixing RC spun pipes with collars (NP2) canal banks, roads,Including caulking the joints of collars as and when necessary, with jute bitumen/ tar& cement mortar 1:3 including preparing subgrade carriage of pipes & collars and other necessary materials including supply and carriage of sand and cement of site, but excluding cost supply of pipe. (c) 225 mm dia.

Supplying 1.5 mm (16 SWG) M.S. sheet fitted and fixed on one or both faces of M.S. bar etc. with point welding not more than 150 mm apart complete in all respect and including cost of labour and materials

Supplying, fitting & fixing of M.S. angle (Size: 45 mm x 45 mm × 6 mm) including gas cutting etc. Unit Weight per mtr=3.5 Kg/mtr, Length=(2*2.44)m=4.88m

Supplying, fitting & fixing of M.S. flat bar 40 mm x 6 mm for straightening the B.R.C. net / Frame with Sheet including gas cutting etc.

Welding in M.S. structural work with gas or electric (a) Continous Weld,

Priming one coat on timber, plastered or on steel or other metal surface with synthetic enamel / oil bound primer of approved quality including smoothening surfaces by sand papering etc

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes

Hire and labour charge for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (upto roof of ground floor)

Supply and installation of Flex over the MS Sheet as per the approved signage as per direction of E.I.C. (2 m x 1 m size)

Supply of extra Flex (Size-2 m x 1 m)

Local transport/loading/unloading

Erection & alignment (2 workers × 1 day)

Awareness Campaign, cost include wage payment to community workers, vehicle cost, leaflet etc.

Meeting Cost for WUA formation, cost including Refreshment, training materials, transport local conveyance, wage payment to community worker, remuneration to resource person and incidental charges

Registration Cost for WUA under suitable act ( Society) deed writing including registration charge, conveyance cost etc.

Livelyhood plan / Micro plan formulation cost for minor irrigation scheme, cost including refreshment, training materials, transport local conveyance, wage payment to community worker, remuneration to resource person and incidental charge ( rate on meeting )

Meeting and demonstration for operation and maintenance of scheme, water management, mode of collection of water tax etc.

IEC.Materials(Leaflet,poster,notebook)=8 meetings, for SL - 2 and SL - 4

Documentation Cost for activities of WUA Scheme - by still photography, report booklet etc in both hard and soft copy.

Impact study and monitoring of scheme by site visit of Community Workers during three years period.

Add:- GST @ 18% (Sl No. 1 To 28)

Add:- Labour Welfare Cess @ 1% ( Sl 1 to 28 + GST )

Please Enable Macros to View BoQ information