PROVISION OF PAVER BLOCK AT DSC LINE, ADDN/ALTN TO TWO WHEELER PARKING SHEDS BEHIND HQ FOST AND PROVN OF HARDSTANDING WITH INTERLOCKING TILES INFRONT OF INDA AT NAVAL BASE, KOCHI

Amount

M&L Surface excavation in soft/loose soil n.exc 30cm deep and averaging 15cm deep and getting out complete all as specified and as directed.

M&L for Cement concrete type B- 1, 1:2:4 (20mm graded aggregate) for coping or chamfered on edges using form work complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate complete all as specified and directed.

M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm spreading and levelling in layers n exc. 25 cm thick andr well ramming including watering as required complete all as specified and as directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness ,M-40 Grade with grey cement and pigment complete all as specified and as directed.

Excavation in trenches n.exc 1.5m and n.exc 1.5m in depth for foundation and getting out in soft/ loose soil complete all as specified and as directed.

M & L for Cement concrete in surface channels and drains in pcc 1:2:4 complete all as specified and directed

M&L Cement concrete in foundations, filling and mass concrete type C2 1:3:6 ( 40mm graded aggregate) complete all as specified and as directed.

M&L for precast cement concrete Type C1 1:3:6 (20 mm graded aggt)solid blocks masonry exc 10 cm in width and set in CM 1:6 complete all as specified and as directed.

M&L 15 mm thick plaster on fair faces of brick or concrete surfaces in cement and sand mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for precast cement concrete type B1, 1:2:4 (20mm graded stone aggrigate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, RETAINING WALLS hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed

S&F Framed work (Fe-290 grade E-165) as in doors, grill or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Excavating in post holes in soft/loose soil (or similar holes) each n.exc 0.5 cum, getting out ramming , filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 Cm complete all as specified and as directed.

M&L for Plain cement concrete 1:2:4, type B 1 as in foundation, filling & mass concrete complete all as specified and as directed.

M&L for Rolled sections (Tublar sections) as in main and cross beams, hip and jack rafters; purlins , wall framing ,where connected to common rafters and fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F prepainted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer, on steel surfaces complete all as specified and as directed. (Make-Asian Apcolite or Equal from Berger, Nerolac)

Surface dressing n exc15 cm deep and getting out soft /loose soil complete all as specified and as directed.

Removal of surplus soil to a distance n.exc. 50 m and n.exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for 50 mm thick cement concrete type B1, 1:2:4 using 20 mm graded stone aggregate in bays complete all as specified and as directed.

Supply and fix 4 mm thick Glass dividing strips , 48 mm width of strip complete all as specified and as directed.

Demolition of brick work in cement mortar complete all as specified and as directed.

S&F MS post and struts in fencing including cutting tops to sharp as directed, drilling holes, notching for wire etc and confirming to similar work Fe-290 grade E-165 complete all as specified and as directed.

Supply only Chain link MS galvanised fencing, including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

S & F for MS round bars10 mm dia in strengthening of chain link fencing including making necessary hooks and inserting in fencing confirming to to Fe 290 Gde E-165 complete all as specified and as directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and dia of neck 5 to 10 mm thick all as specified and as directed .

S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness ,M-35 Grade with grey cement and pigment complete all as specified and as directed.

LALA CONSTRUCTION

Albert Rebello and Company

ANIE JOHN CONTRACTORS

M/s ANTONY THOMAS AND CO

REIGN CONSTRUCTIONS

MS BUILDERS