Kerala

Active

Works

Civil Works - Others

Annual Plan-EDATHALA GP - 2026-2027- DP-EKM-PROJECT NO 900-26-27 GHS EDATHALA URGENT MAINTENANCE WORKS IN EDATHALA GP-General Civil Work

Local Self Government Department

O/o The Executive Engineer | Ernakulam, Kerala

Amount: ₹2.5 LCloses: 9 Oct 20267d left

Timeline

Published30 Sept 2026
Closes9 Oct 2026
Bid Opening12 Oct 2026

Tender Value

₹2.5 L

EMD Value

₹6,355

Closing Date

9 Oct 2026, 3:05 pm7d left

Tender Inviting Organisation

Name

Executive Engineer

Address

O/o the Executive Engineer, LSGD Division, Kakkanad, Ernakulam

Work Description

Refer tender document

Tender Information

Tender ID

2026_LSGD_875009_1

Reference Number

ET19/DPEKM/AE/LSGD/26-27

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Percentage

Period of Work

180 days

Location

O/o The Executive Engineer

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

Requiredcopy of Duly filled and signed bid submission form (.pdf)

Requiredcopy of Preliminary agreement duly filled and signed by the contractor (.pdf)

Requiredcopy of contractors valid licence(PRICE 3), GST registration certificate and Aadhar card (.pdf)

Requiredcopy of Affidavit duly filled and signed by the contractor. (.pdf)

Requiredcopy of Duly filled and signed requisition form for epayment and format for Integrity Pact (.pdf)

RequiredSBD duly digitally signed by contractor (.pdf)

RequiredTender Schedule (should be rounded to two decimals, others cannot be uploaded in price 3) (.xls)

Fee & Financial Details

Tender Fee Amount

₹560

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹6,355

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

30 Sept 2026

Published

30 Sept 2026

Bid Opening

12 Oct 2026

Download Starts

30 Sept 2026

Download Ends

9 Oct 2026

Submission Starts

30 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (16 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1BUILDING
1.001	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	0.11	cum	257.63	₹27.82
1.002	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	3.62	cum	9,235.97	₹33,443.45
1.003	50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete	0.31	cum	6,831.14	₹2,103.99
1.004	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	3.56	sqm	369.76	₹1,314.5
1.005	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	237.95	kg	230.93	₹54,949.79
1.006	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	90.6	kg	187.05	₹16,946.73
1.007	OD191948/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.	75.34	sqm	622.81	₹46,919.39
1.008	OD192185/2026-2027:Providing and fixing 200mm wide square uPVC rain water gutter including all necessary fittings and making all necessary connections complete as per the direction of Engineer in charge at site	7.6	metre	501.5	₹3,811.4
1.009	50.9.6.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters	0.72	sqm	4,055.51	₹2,919.97

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.06 MB

Work Item Documents

Requisitionfore-payment.pdf

Tender Documents • 0.17 MB

BOQ_1485413.xls

BOQ • 0.32 MB

viewsbd.pdf

Tender Documents • 2.77 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1BUILDING
1.001	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	0.11	cum	257.63	₹27.82
1.002	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	3.62	cum	9,235.97	₹33,443.45
1.003	50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete	0.31	cum	6,831.14	₹2,103.99
1.004	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	3.56	sqm	369.76	₹1,314.5
1.005	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	237.95	kg	230.93	₹54,949.79
1.006	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	90.6	kg	187.05	₹16,946.73
1.007	OD191948/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.	75.34	sqm	622.81	₹46,919.39
1.008	OD192185/2026-2027:Providing and fixing 200mm wide square uPVC rain water gutter including all necessary fittings and making all necessary connections complete as per the direction of Engineer in charge at site	7.6	metre	501.5	₹3,811.4
1.009	50.9.6.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters	0.72	sqm	4,055.51	₹2,919.97

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1BUILDING

1.001

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

0.11

cum

257.63

₹27.82

1.002

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

3.62

cum

9,235.97

₹33,443.45

1.003

50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

0.31

cum

6,831.14

₹2,103.99

1.004

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

3.56

sqm

369.76

₹1,314.5

1.005

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

237.95

230.93

₹54,949.79

1.006

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

90.6

187.05

₹16,946.73

1.007

OD191948/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.

75.34

sqm

622.81

₹46,919.39

1.008

OD192185/2026-2027:Providing and fixing 200mm wide square uPVC rain water gutter including all necessary fittings and making all necessary connections complete as per the direction of Engineer in charge at site

7.6

metre

501.5

₹3,811.4

1.009

50.9.6.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters

0.72

sqm

4,055.51

₹2,919.97