Fire protection system work related to construction of hospitality and sports facilities at CIAL Golf Club.

Amount

EXTERNAL PUMP ROOM

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, Efficiency class not less than IE3 synchronous speed 2900 RPM, suitable for operation uo 415 volts.: 3 phase 50 Hz AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class F- insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. The head of the pump shall be able to give a minimum 3.5kg/sqcm pressure at the highest / farthest point.As per standards, specification and directed by the Engineer-in-charge. 2280 lpm at 60 m Head

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal onforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads The pump shall be able to give a minimum 3.5kg/sqcm pressure at the highest/farthest point.As per standards, specification and directed by the Engineer-in- charge. 2280 lpm at 60 m Head

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of the following, complete in all respects, as required (Jockey pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS: 1520. Suitable HP squirell cage induction motor TEFC type,Efficiency class not less than IE3, suitable for operation on 415 volts ± 6%, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS: 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.As per standards, specification and directed by the Engineer-in-charge. 180 LPM at 60 M head

Fire Hydrant

Sports complex (A) Supplying, installation, testing and commissioning of electric driven terrace pump of capacity 450 LPM with head 35M suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal confirming to IS: 1520 (C) Suitable HP squirell cage induction motor,Efficiency class not less than IE3 TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (D) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered and with anti vibration pads.

Convention Centre (A) Supplying, installation, testing and commissioning of electric driven terrace pump of capacity 900 LPM with head 35M suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal confirming to IS: 1520 (C) Suitable HP squirell cage induction motor TEFC type,Efficiency class not less than IE3, suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (D) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered and with anti vibration pads.

Supplying, installing ,testing and commissioning of Pressure gauges of suitable range for pump sets and pipe lines for the respective floors near to the flow switches with Ball valves, siphon, Fittings like unions / colors / reducers etc.

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. 15 mm dia. As per standards, specification and directed by the Engineer-in-charge.

Supplying, installing, testing and commissioning of Cast iron Ball valves with fittings of screwed end type with ISI mark a) 25 mm Dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6mm thick stainless steel. Grade 304, sheet with 3mm dia holes with stainless steel flange. As per standards, specification and directed by the Engineer-in-charge. a) 200 mm Dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6mm thick stainless steel. Grade 304, sheet with 3mm dia holes with stainless steel flange. As per standards, specification and directed by the Engineer-in-charge. b) 100 mm Dia

Supplying and fixing air vessel made of 200 mm dia, 8mm thick MS sheet, 1000 mm in height with pressure release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. As per standards. specification and directed by the Engineer-in-charge

Providing, laying, testing & commissioning of 'C' class heavy duty M.S. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall / ceiling with suitable clamp/support frame and wrapping with polymer corrossion protection tape 4mm thick confirming to IS 10221 with proper overlapping, trimming etc complete as required:As per standards, specification and directed by the Engineer-in- charge. a) 200 mm Dia( wall thickness 6.3 mm)

Providing, laying, testing & commissioning of 'C' class heavy duty M.S. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall / ceiling with suitable clamp/support frame and wrapping with polymer corrossion protection tape 4mm thick confirming to IS 10221 with proper overlapping, trimming etc complete as required:As per standards, specification and directed by the Engineer-in- charge. b) 150 mm Dia

Providing, laying, testing & commissioning of 'C' class heavy duty M.S. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall / ceiling with suitable clamp/support frame and wrapping with polymer corrossion protection tape 4mm thick confirming to IS 10221 with proper overlapping, trimming etc complete as required:As per standards, specification and directed by the Engineer-in- charge. c) 100 mm Dia

Providing, laying, testing & commissioning of 'C' class heavy duty M.S. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall / ceiling with suitable clamp/support frame and wrapping with polymer corrossion protection tape 4mm thick confirming to IS 10221 with proper overlapping, trimming etc complete as required:As per standards, specification and directed by the Engineer-in- charge. d) 80 mm Dia

Providing, laying, testing & commissioning of 'C' class heavy duty M.S. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall / ceiling with suitable clamp/support frame and wrapping with polymer corrossion protection tape 4mm thick confirming to IS 10221 with proper overlapping, trimming etc complete as required:As per standards, specification and directed by the Engineer-in- charge. d) 65 mm Dia

Providing, laying, testing & commissioning of 'C' class heavy duty M.S. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall / ceiling with suitable clamp/support frame and wrapping with polymer corrossion protection tape 4mm thick confirming to IS 10221 with proper overlapping, trimming etc complete as required:As per standards, specification and directed by the Engineer-in- charge. f) 25 mm Dia

Providing, laying, testing & commissioning of 'C' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall / ceiling with suitable clamp/support frame and wrapping with polymer corrossion protection tape 4mm thick confirming to IS 10221 with proper overlapping, trimming etc complete as required:As per standards, specification and directed by the Engineer-in- charge. a) 100 mm Dia

Providing, laying, testing & commissioning of 'C' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall / ceiling with suitable clamp/support frame and wrapping with polymer corrossion protection tape 4mm thick confirming to IS 10221 with proper overlapping, trimming etc complete as required:As per standards, specification and directed by the Engineer-in- charge. b) 25 mm Dia

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. a) 150 mm Dia

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. b) 100 mm Dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :As per standards, specification and directed by the Engineer-in-charge. a) 200 mm Dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :As per standards, specification and directed by the Engineer-in-charge. b) 150 mm Dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :As per standards, specification and directed by the Engineer-in-charge. c) 100 mm Dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :As per standards, specification and directed by the Engineer-in-charge. d) 80 mm Dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :As per standards, specification and directed by the Engineer-in- charge. a) 100 mm Dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :As per standards, specification and directed by the Engineer-in- charge. b) 80 mm Dia

Supply, installation, testing and commissioning of Hydraulic Hose Reel drum completed with MS construction spray painted in post office red, with swinging type drum as per IS 884 with ISI mark, 20 mm dia braided Thermoplast hose of 30M. length and Shut off nozzle, with necessery fittings etc. complete.

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :As per standards, specification and directed by the Engineer-in-charge.

Supply, installation, testing and commissioning of Single Door Hose Cabinet to accommodate two piece of hose pipe(15mtr) along with one pair of male and female coupling and one branch pipe. The cabinet is made of 20swg M.S Sheet, glass fronted with hinged door and lock.

Supply and placed in position of SS Branch Pipe, as per IS 903 with ISI mark, 63mm female instantaneous inlet, male threaded outlet, complete with hexagonal base nozzle.

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with SS 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required

Supply, installation, testing and commissioning of single acting Air Release Valve with brass valve screwed inlet 20mm dia etc.

Supplying and fixing of 4 way fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for 100mm dia MS pipe connection conforming to IS 904 as required

Supply, installation, testing and commissioning of Fire Brigade Inlet connection with 2 nos of 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arranged on 100 mm dia.etc and shall be connected to the system

Supply, installation, testing and commissioning of Draw out connection 100 mm dia in CI body with GM working parts .with 100 mm foot valave PN 1.0 rating with CI metal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :As per standards, specification and directed by the Engineer-in-charge

Supplying, installation, testing & commissioning of deluge valve of 100mm dia (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required.

Water Curtain Nozzle: Supply, Installation,Testing and Commissioning of water curtain nozzle, 15mm/20mm dia nominal nickel chrome plated brass, BSPT, K-factor as per design considerationcomplete as required.

Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. FIRE DUCT

Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. FIRE EXIT

Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. EXIT

Signage with printed "Assemble Point" of 1.25cm height letters in green with white back ground. For gathering outside the building during fire emergency.

Supply, installation, testing and commissioning of Fire Exit Light, Laser type, with High Glow LED, size: 300x 178 x 32 mm. or 390 x190 x 60mm, Ceiling Mounting type with hanging clamps, on/off switch, Red / Green Colour option with minimum of 25 Mtr. viewing distance, power consumption: 5.0 Watt per face (maximum), with 24 Hr. Battery Backup.

Supplying, Fixing, testing and commissioning at site Puddle Flange fabricated from MS PIPE PUDDLE FLANGE CLASS-C ,600 mm LONG .CENTER FLANGE 5 MM THICK PLATE & ISI - SINGLE SIDE FLANGE as std 4” (100mm) dia -Mild Steel Material , single side flange

Supplying, Fixing, testing and commissioning at site Puddle Flange fabricated from MS PIPE PUDDLE FLANGE CLASS-C ,600 mm LONG .CENTER FLANGE 5 MM THICK PLATE & ISI - SINGLE SIDE FLANGE as std 6” (150mm) dia -Mild Steel Material , single side flange

Supplying, Fixing, testing and commissioning at site Puddle Flange fabricated from MS PIPE PUDDLE FLANGE CLASS-C ,600 mm LONG .CENTER FLANGE 5 MM THICK PLATE & ISI - SINGLE SIDE FLANGE as std 8” (200mm) dia -Mild Steel Material , single side flange

Addressable Fire Detection & Alarm System

Supply of Addressable Active Repeater Panel which consists of display board which will have 640 Character Display Inbuilt RS-485 Networking Circuit for peer to peer networking Maximum of 08 Panels in a network, and One Fire Relays, power Supply Board which will have SMPS fully protected board, which operates on 120 to 220V AC ± 10% with 50/60 Hz, 24V DC with built-in charger. Repeater shall be UL Listed and FM approved.

Supply, installation, testing and commissioning of Analogue Addressable type Optical Smoke Detector (photoelectric type) complete with all accessories like base. base box, etc. to be installed under/above false ceiling, roof and concealed space, etc. interconnecting to loop cable complete as required. item shall be UL Listed and FM approved.

Supply, installation, testing and commissioning of Multi sensor Detector cum Sounder. Analogue Addressable type Optical Smoke Detector (photoelectric type) with sounder base 85 db system complete with all accessories like base. base box, etc. to be installed on false ceiling, roof and concealed space, etc. interconnecting to loop cable complete as required. item shall be UL Listed and FM approved.

Supplying, installation, testing & commissioning of heat detector operating at 54°C/57°C with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required. item shall be UL Listed and FM approved.

Supply,Installation,Testing & Commissioning of Addressable Fault isolator module capable of monitoring shorted loop circuit and automatically restore communications when shorted conditions are corrected. Fault Isolator Module should not occupy any address. The Isolator shall be UL Listed and FM approved.

Supplying, installing, testing and commissioning of Addressable Control module (For Hooters& AHU) with staus indicator LED shall be capable of providing DPDTcontact rated at 24v DC, 2A. Shall be UL listed and FM approved.

Supplying, installing, testing and commissioning of Addressable Type Single action Manual pull station having an integrally mounted Addressable module that monitors and reports contact status, Powder coated finish of approved color, as per specifications. Shall be UL Listed and FM approved.

Supplying, installing, testing and commissioning of Horn cum Strobe rated at 82 db A @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication and wiring circuit, with powder coated finish of approved color.as per specifications. Separate loop for Horn cum Strobe shall not be accepted. The Power Supply for Hooter cum Strobe shall be included. Shall be UL Listed and FM approved.

Supplying, installing, testing and commissioning of fire alarm hooter with suitable 24VDC power supply as required. Shall be UL Listed, FM approved

Supplying, installing, testing and commissioning of 2 core 1.5 sq. mm, PVC insulated copper Armoured FRLS wires confirming to IS standards and specifications.

Supplying, installing, testing and commissioning of Unshielded Twisted Pair Category RJ-45 telecommunication network cable . Interconnection between main FACB & Switch with suitable wires or cables including conduits/raceways, accessories as requried as complete etc. (Unshielded Twisted Pair (UTP) Category [CAT6] Ethernet cable with RJ-45 connectors, suitable for LAN applications)

Supply, installation, testing and commissioning of PC with latest gen Intel i3 processor with Supporting GUI software system for fire alarm detection 3D visualization, 8GB RAM,4GB GRAPHICS , 500 GB SSD, Full HD, 32" monitor, keyboard, optical mouse, with batteries, other accessories as required as complete etc, Software for programming (mapping) the Fire detection through FACP / Lap top. The software shall consisting with facility like Upload / down load of informations to FACP, Graphics compatible to AutoCAD, Detectors information with change in address / sensitivity etc as required.

Talkback System

Supply installing, testing and commissioning of Booster amplifier 120-Watt RMS output at 2/4 Ohms with external line converter, Line Voltage: 70 / 100V, Output level LED, 3-way tone control, 3 types of protection (AC Bi metal circuit breaker, short circuit & Over heating), required power supply 220-240 V AC 50 Hz,

Racks with required tray / mounting accesories to mount controller, routers, amplifiers, cable managers etc. The Rack should have required Fan to exhaust the hot air generated in the rack. Rack mount power distribution unit, 1Ph, 230V, 16A, 50/60Hz, 2U standard with 6 X Indian Round Pin 5/15A, Inlet Plug type, 16A Indian Round Pin, 16A MCB - PDU Rating 3.6KVA/Side feed-1.5Mt/ Black .The input cables should be managed neatly inside the the rack as requried as complete. Amplifier rack assembly made of aluminium channel equivalent to euro rack system, with side and rear panels made of 14 swg powder coated sheet steel front transparent persplexdoor and with rails, rollers & bearings. Fans shall provided at the top for ventilation side panels will be ventilated type. The rack shall be powder coated of approved color and spare 'U' shall be covered with blank panels. 12 U RACK

Supplying, installing, testing and commissioning 6W wall mounted type speakers with talk back facility (Two way switch), in CRCA sheet fabricated housing, complete.

Supplying & laying of 4C1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS As per standards, specification and directed by the Engineer-in-charge. outer sheath complete as required. (BLUE OR BLACK FOR PA SYSTEM)

Fire Extinguishers

Supply, Installing, testing and commisioning of ABC powder type Fire Extinguisher of 4 Kg. capacity refillable type fitted with internal discharge tube, pressure guage, squeez grip, nozzle and suspension bracket and fixing screws complete with initial charging. All to be confirmed to latest BIS codes As per standards, specification and directed by the Engineer-in-charge.

Supplying, installing and commissioning of Carbon-di-oxide type fire extinguisher of 2 kgs Capacity refillable type fitted with internal discharge tube, pressure guage, squeez grip, bend and horn, nozzle with suspension bracket and fixing screws complete with initial charging CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve. All to be confirmed to latest BIS codes.As per standards, specification and directed by the Engineer-in-charge.

AMC for Fire pump Diesel Engine after the DLP of 2 years

1st Year After DLP

2nd Year After DLP

3rd Year After DLP

4th Year After DLP

5th Year After DLP

PREFire Contracting Engineers Pvt Ltd (BID ID -2187853)

Skylight Innovations (BID ID -2190984)

Allies Fire Systems Pvt Ltd (BID ID -2190374)

J.K DEFENCE FIRE ENGG. SERVICES (BID ID -2186513)