LRRP-LRRP 2024-25, PATTAMBI LAC, SL NO. 2857,ODUPPARA AIRPORT ROAD, THIRUVEGAPPURA GP ,PALAKKAD District-2857/24-25-General Civil Work

Amount

Appendix.A .Interlock paving

3.2:Preparation of Foundation for Embankment <br> Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means <br> Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.

3.5.2:Excavation in Soil with Dozer with lead upto 100 m <br> Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.

OD443099/2024-2025:Granular Sub-base/base/surface course with local materials(Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material, spreading in uniform layers manually mixing by mix in place method and compacting with rammers to achieve the desired density, complete as per Clause 401.4 as per Technical Specification Clause 408

OD443102/2024-2025:Flooring with interlocking paving blocks 80mm thick M30grade over a bed of 6mm metal filing in 50mm average thick and compacting suing earth hammer /compacting ting machine hand operated including cost and conveyance of all materials labor charges ,etc., complete ,Excluding cost of edges concreting (16.91.2 modified)

75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)

OD443131/2024-2025:(Derived from MORD spec 10.3.A.2) Direction and Place Identification signs upto 0.9 sqm size board <br> A. Retroreflectorised Traffic Signs <br> Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on 2 inch dia GI Pipe firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Tehnical Specification Clause 1701. Unit = sqm Taking output = 0.9 sqm

Appendix.B. Road concrete and reconcrete

3.2:Preparation of Foundation for Embankment <br> Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means <br> Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.

3.5.2:Excavation in Soil with Dozer with lead upto 100 m <br> Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.

OD445250/2024-2025:Filling with Quarry Muck Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade (i) Using naturally occuring gravel

OD443088/2024-2025: Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers manually mixing by mix in place method and compacting with rammers to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. (i) Using naturally occuring gravel

75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)

Mohammed Abdul Jaleel (BID ID -2159926)

Bidder Name

Mohammed Abdul Jaleel

SANTHOSH K T