CONSTRUCTION OF INTERGRATED ADMINISTRATIVE BUILDING FOR AMBAJI AREA DEVELOPMENT AND PILGRIMAGE TOURISM GOVERNANCE AUTHORITY, AMBAJI, GUJARAT

A Sub-Total Amount (1+2+3+4+5+6+7+8)

1.01 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft

1.02 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard

1.03 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and

stacking of useful materials and disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil cu. m 134.95 2653.55

1.04 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and

stacking of useful materials and disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil cu. m 168.81 2575.17

1.05 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and

stacking of useful materials and disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil cu. m 148.17 5453.18

1.06 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and

stacking of useful materials and disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil cu. m 181.13 5453.18

1.07 Extra for additional depth more than 5.0 m for excavation for foundation including

sorting out and stacking of useful materials and disposing of the excavated stuff upto

50 m lead.(A) Loose or soft soil cu. m 21.96 107.93

1.08 Extra for additional depth more than 5.0 m for excavation for foundation including

sorting out and stacking of useful materials and disposing off the excavated stuff upto

50 m lead.(B) Dense or Hard soil cu. m 21.96 107.93

1.09 Add extra for Disposing off the excavated stuff of above items for lead of (A) 50 m to

1.1 Add extra for Disposing off the excavated stuff of above items for lead of (B) 100 m to

1.11 Add extra for Disposing off the excavated stuff of above items for lead of (C) 200 m to

1.12 Add extra for Disposing off the excavated stuff of above items for lead of (D) 300 m to

1.13 Add extra for Disposing off the excavated stuff of above items for lead of (E) 400 to

1.14 Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering. cu. m 135.56 14904.88

1.15 Filling in plinth with sand under floors including watering ramming, consolidating and

dressing complete cu. m 440.35 320.40

1.16 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and

saplings of girth up to 30 cm measured at a height of 1 m above ground level and

removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

1.17 Clearing grass and removal of the rubbish up to a distance of 50 m outside the

periphery of the area cleared. cum 7.51 3419.01

1.18 Supplying chemical emulsion in sealed containers including delivery as specified.

Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 196.97 960.00

1.19 Along the external wall below concrete or masonry apron using chemical emulsion @

2.25 litres per linear metre including drilling and plugging holes etc.:

With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration metre 44.85 222.21

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

1.2 Treatment of soil under existing floors using chemical emulsion @ one litre per hole,

300 mm apart including drilling 12 mm diameter holes and plugging with cement

mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With

Chlorpyriphos/Lindane E.C. 20% with 1% concentration Sq m 260.15 2550.99

Treatment of soil under existing floors using chemical emulsion @ one litre per hole,

300 mm apart including drilling 12 mm diameter holes and plugging with cement

mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With

Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Detail of cost each plant Areca Palm having ht. 1.80 m to 2.10 m with 8 to 10 suckers,

1.22 well developed, fresh and healthy with lush green foliage in 30 cm size of Earthen pot / Each 382.50 58.00

Detail of cost each plant Rhapis Palm specimen having ht. 1.50 m to 1.65 m with 40 to

1.23 50 lush green suckers, well developed, fresh & healthy foliage leaves in 40 cm size Pot Each 598.40 30.00

/ Challi / Tray

Detail of cost each plant Schefflera Green plant (three in one), mounted on moss stick

1.24 90 cm, well developed with full of fresh & healthy leaves from bottom to top with rich Each 296.10 26.11

foliage in 25 cm size of Earthen pot / Plastic pot Each 1 240.00 240.00 Total

Detail of cost each plant Spathiphyllum (peace lilly), having 15 cm to 25 cm ht.

1.25 blooming stage with fresh & healthy foliage well developed in 15 cm of Earthen Each 101.05 6.89

pot/plastic pot

Detail of cost each plantCanna dwarf of height 25 to 30 cm., 2 to3 suckers in 20 c.m

1.26 Earthen Pot/Plastic Each 39.50 48.89

Detail of cost each plant Bird of paradise well developed with fresh & healthy 90 cm to

120 cm ht in 30 cm Earthen Pot/ Plastic Pot

Detail of cost each plant Ixora dwarf different colour having 10 cm to 15 cm ht., well

1.28 developed with fresh & healthy foliage with bloom in 15 cm Earthen Pot/Plastic Pot Each 148.05 198.33

Detail of cost each plant Lantana sp. of different colour, well developed with fresh &

healthy foliage with bloom in 20 cm Earthen Pot/Plastic Pot

Detail of cost each plant Lantana sp. of different colour, well developed with fresh &

healthy foliage with bloom in 20 cm Earthen Pot/Plastic Pot

Detail of Cost each plantClerodendrum inerme having ht. 25 cmto 30 cm multi

branched in 25 cm size ofEarthen Pot / Plastic Pot

Detail of Cost each plantClerodendrum inerme having ht. 25 cmto 30 cm multi

branched in 25 cm size ofEarthen Pot / Plastic Pot

Detail of cost each Plant Bigonia gracilis creeper (yellow)of height30 cm to 45 cm,

Healthy, well developedin Poly/Gunny Bag.

Details of cost of each plant. Minia erectra plant of height 45-60 cm. multi branches

well developed in poly bag of size 20 cm.

1.22 Azadirachta indica ( Neem ) height 120-130cm in polybag size 25 cm Each 72.20 30.00

1.23 Detail of cost each plant Ficus retusa well branched height120-135 cm. in poly bag

1.24 Providing and stacking of Michelia champa (Golden Champa) of height 90-105 cm.in

earthen pot of size 25 cm as per direction of the officer-in-charge 81.81 44.00

1.25 Providing and stacking of Plumeria acutifolia of height 150-165 cm. with 3-4 branches

in big size HDPE bag as per direction of the officer-in-charge. 181.78 23.00

Providing and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and

thick stem in big size HDPE bag as per direction of the officer-in-charge.

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

Providing and stacking of Tabebuia sp. of height 150-165 cm. in poly bag of size

cm as per direction of the officer-in-charge.

Providing and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and

thick stem in big size HDPE bag as per direction of the officer-in-charge.

Providing and stacking of Largerstroemia indica of height 90-105 cm. multibranched in poly bag

of size 25 cm as per direction of the officer-in-charge.

Total of sub-head

2 CONCRETE WORK

2.01 Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand

broken stone aggregates 40 mm nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth cu. m 2627.15 1075.39

2.02 Providing TMT Bar FE 550D reinforcement for R.C.C. work including bending, binding

and placing in position complete upto floor two level kg 94.05 1487103.91

2.03 Extra for additional lift of concrete for all R.C.C. work above floor two level excluding

cost of reinforcment cu. m 39.53 2699.06

2.04 Extra for additional lift of reinforcing steel for all R.C.C. work above floor two level.

2.05 Providing and laying damp proof course 25mm thick cement concrete 1:2:4 (1-Cement

: 2 coarse sand : 4 stone aggregate 10 mm nominal size) and curing complete

2.06 Providing and laying in position Ready Mixed M-350 grade concrete for reinforced

cement conctere work , using cement content as per approved Design Mix

manufactured in fully automatic batching plant and transported to site of work in transit

mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per

mix design of specified grade for reinforced cement concrete work including pumping

of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering

finishing and reinforcement including cost of admixtures in recommended proportions

as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in - charge. Without

Fly Ash(Min cement level as per latest IS 456 shall be maintained) (Cement level

2.07 Providing and laying in position cast in situ reinforced cement concrete waffle slab,

square or rectangular as per design and shape for floors and roofs in M35 , including

flush or deep ruled pointing at joints in cement mortar 1:2 (1 cement : 2 Fine sand),

including centering shuttering, strutting and propping etc. and removal of the same for

in situ reinforced concrete work in. for all floor levels but excluding the cost of

2.08 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne

capacity after excavating earth to an average of 22.5 cm depth, dressing to camber

and consolidating with road roller including making good the undulations etc. and re-

rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.

2.09 Laying, spreading and compacting stone aggregate of specified sizes to WBM

specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory

roller 8-10 tonne capacity in stages to proper grade and camber, applying and

brooming requisite type of screening / binding material to fill up interstices of coarse

aggregate, watering and compacting to the required density . cum 878.46 904.79

2.10 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from

batching plant. The ready mixed concrete shall be laid and finished with screed board

vibrator , vacuum dewatering process and finally finished by floating, brooming with

wire brush etc. complete as per specifications and directions of Engineer-in-charge.

(The panel shuttering work shall be paid for separately).

(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement

used as per design mix is payable/ recoverable separately).

Total of sub-head

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

3.01 Brick work using common burnt clay building bricks having crushing strength not less

than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(B) Conventional cu. m 4172.60 369.55

3.02 Extra for brick work in superstructure above plinth level upto floor two level (B)

Conventional cu. m 278.93 369.55

3.03 Extra for brick work in superstructure above floor two level Item No. 2(6.13) (B)

Conventional per floo r per cu. m 41.70 152.20

3.04 Half brick masonry in common brunt clay building bricks having crushing strength not

less than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-coarse sand ) with 2 Nos

of 6mm Mild steel round bars after every three course embedded in Cement Mortar in

foundation and plinth (B)Conventional Sq m 689.44 2018.03

3.05 Extra for brick work in superstructure above floor two level Item No. 5 (B) Coventional/

AAC Block Work cu. m 42.01 531.11

3.06 Extra for half brick masonry in superstructure above plinth level upto floor two level. (B)

Conventional/ AAC Block Work Sq m 53.89 714.45

3.07 Extra for half brick masonry in superstructure above floor two level.(B) Conventional/

AAC Block Work Sq m 6.24 908.42

3.08 Masonary work using Aerated light weight concrete block having crushing strength not

less than 35 kg/sqcm for super structure above plinth level upto floor two level in

cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Technical Specification

Total of sub-head

4.01 Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of

Columns etc. and Mass concrete. Sq m 178.61 5130.80

4.02 Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of

supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in

4.03 Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of

suspended floor roof slabs Landings and the like. (2) Floors etc. above 200mm in

4.04 Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (C) Vertical surface such as walls (any

thickness) partitions and the like including attached buttresses & string course & the

4.05 Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts.

(1) Square Rectangular Polygonal in plan. Sq m 315.87 4042.77

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

4.06 Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams

Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in

4.07 Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (M) Staircase with sloping or stepped

soffits including risers and stringers excluding landing. Sq m 256.34 534.29

Total of sub-head

5 WOOD WORK & JOINERY WORK

5.01 Providing wood work in frames of Doors, windows cleare story windows and

othersimilar works wrought, framede and fixed in position. (A) Indian Teak Wood Cu.

5.02 Provoding and fixing flush door shutters, solid core construction with frame of first class

hardwood with cross board and face veneer or plywood face panels, including

anodised alluminium butt hinges with necessary screws. (B) Non-decorative type and

block board core anodised alluminium butt hinges in flush door shutters (2) 35 mm

thick. Sq m 1811.62 406.08

5.03 Provoding and fixing flush door shutters, solid core construction with frame of first class

hardwood with cross board and face veneer or plywood face panels, including

anodised alluminium butt hinges with necessary screws. (B) Non-decorative type and

block board core anodised alluminium butt hinges in flush door shutters (2) 35 mm

thick. Sq m 9018.30 969.08

Providing and fixing extruded aluminum window having extruded aluminum Colour

Powder Coated section frame main outer size 127mm x 38.10mm x 1.35mm ,@

Wt.1.384 Kg/mt,horizontal Four track member size 122.20mm x 31.75mm x 1.10mm @

Wt. 1.205 Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm ,@ Wt.

5.03 1.398 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm Sq m 2119.14 73.79

@ wt.of 0.456Kg/mt,vertical member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt,@ with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

5.04 Extra for Providing and fixing flush doors with decorative veneering instead of non

decorative ISI marked flush door shutters conforming toIS: 2202 (Part I)

On one side only Sq m 401.07 439.33

5.05 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on

all edges of flush door shutters (over all area of door shutter to be measured). Sq m 387.94 439.33

5.06 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws

etc. complete (Copper oxidised as per IS 1378)

5.07 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with

necessary screws etc. complete (Copper oxidised as per IS 1378)

5.08 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel

screws etc. complete :

125x64x1.90 mm each

5.09 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers

and a pair of lever handles of approved quality with necessary screws etc. complete.

5.1 Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and

a pair of lever handles of approved quality with necessary screws etc. complete.

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

5.11 Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight

upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed

adjustment with necessary accessories and screws etc. complete.

5.12 Providing and fixing bright finished brass handles with screws etc. complete: each 215.35 4.00

5.13 Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete. each 102.07 217.00

5.14 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim

Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be

approved by the Engineer- in- charge, all complete. each 7019.76 21.00

5.15 Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side

& 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI

sheet (Zinc coating not less than 120 gm/sqm) suitable for mounting 120 minutes Fire

Rated Glazed Door Shutters. The frame shall be filled with mineral wool Insulation

having density minimum 96Kg/sqm. The frame will have a provision of G.I. anchor

fastners 14 nos (5 each on vertical style & 4 on horizontal style of size M10 x 80)

suitable for fixing in the opening along with factory made template for SS ball bearing

hinges of size 100x89x3 mm for fixing of fire rated glazed shutter. The frame shall be

finished with an approved fire resistant primer or powder coating of not less than

micron in desired shade as per the directions of Engineer - in- Charge. (Cost of SS ball

bearing hinges is excluded).

5.16 Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes Fire

rating conforming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per

laboratory approved by Engineer-in-Charge, with suitable mounting on door frame,

consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of

110 mm x 60 mm made out of 1.6 mm thick G.I. sheet (zinc coating not less than

gm/ sqm) duly filled mineral wool insulation having density minimum 96 kg/ cum and

fixing with necessary stainless steel ball bearing hinges of size 100x89x3 mm of

approved make, including applying a coat of approved fire resistant primer or powder

coating not less than 30 micron etc all complete as per direction of Engineer-in-Charge

(panelling to be paid for seperately).

5.17 Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc.,

with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than

gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm

from the edges and 150 mm c/c , including applying a coat of approved fire resistant

primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic

tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part

3):2016 and as per direction of

Engineer-in-Charge with glass of required thickness having 120 minutes of fire

resistance both integrity & radiation control (EW120) and minimum 20 minutes of

insulation (EI20). The manufacturer have to give test report/certification of fire glass

and the glass should have the stamp showing the value of E, EW & EI. The glass shall

be tested in approved NABL accredited lab or by any other accreditation body which

operates in accordance with ISO/IEC 17011 and accredited labs as per ISO/IEC

for testing and calibration scopes shall be eligible. The maximum glazing size shall not

be more than 1100x2200 mm (w x h) or 2.42 sqm.

5.18 Providing and fixing bright /matt finished Stainless Steel handles of approved quality &

make with necessary screws etc all complete.

Total of sub-head

6 STEEL ALUMINUM & IRON WORK

6.01 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint. (A)In beams and joists, channels

angles Tees, flats, with connecting plates or angle cleats as in main and cross beams.

Hip and jack rafters, purlins conneted to common rafters and the like

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

6.02 Providing and fixing M.S. round holding down or anchor bolts with nuts and washer

plates complete. Kg 55.05 3000.00

6.03 Supplying and fixing rolling shutters of approved make, made of required size M.S.

laths, interlocked together through their entire length and jointed together at the end by

end locks, mounted on specially designed pipe shaft with brackets, side guides and

arrangements for inside and outside locking with push and pull operation complete,

including the cost of providing and fixing necessary 27.5 cm long wire springs

manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 -

part 1 and M.S. top cover of required thickness for rolling shutters.

80x1.25 mm M.S. laths with 1.25 mm thick top cover

6.04 Extra for providing mechanical device chain and crank operation for operating rolling

Exceeding 10.00 sqm and upto 16.80 sqm in the area Sq m 1075.14 54.00

Total of sub-head

7 PAVING & FLOOR FINISHES WORK

7.01 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement. Sq m 1109.27 186.78

7.02 Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of steps and dedo

on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white

cement slurry Sq m 1576.63 3.82

7.03 Providing and laying rough chiseled dressed stone flooring over 20mm thick base of

cement mortar 1:5 (1-Cement : 5- coarse sand) or L.M. 1:1.5 including pointing with

cement mortar 1:2 (1-cement : 2-stone dust) etc. complete. (B) 40mm thic Sq m 637.20 5936.45

7.04 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias

and similar locations of required size, approved shade, colour and texture laid over

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing of edges to give high gloss finish etc. completeat all levels.

Granite stone slab of all colour and texture except black, Cherry/Ruby red Area of slab

Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm

thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white

cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment

matching the stone shade. Rmt 325.70 14.40

7.05 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with

grey cement slurry mixed with pigment to match the shade of the slab including rubbing

and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

25 mm thick. Sqm 1634.71 238.41

7.06 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified

by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in

colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement

Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement

and matching pigment etc., complete. Sqm 920.08 994.35

7.07 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by

the manufacturer) with water absorption less than 0.08% and conforming to IS:15622,

of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick

cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3

kg/sqm including grouting the joints with white cement and matching pigments etc. The

tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be

done with the notch trowel, plier, wedge, clips of required thickness, leveling system

and rubber mallet for placing the tiles gently and easily.

Double charge vitrified tile polished finish of size

11.41A.1.3 Size of Tile 600 x 1200 mm

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

7.08 Glazed Vitrified tiles Matt/Antiskid finish of size.

11.41A.3.1 Size of Tile 600 x 600 mm Sqm 1229.11 1656.84

7.09 Providing and laying flamed finish Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and

pointing with white

cement slurry admixed with pigment of matching shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite

Brown, Cat Eye or equivalent.

7.10 25 mm wooden planking, tongued and grooved in flooring, including fixing

with iron screws complete with : Sqm 3783.31 1404.88

7.11 Providing and fixing removable raised/false access flooring with system and its

components of approved make for different plenum height with possible height

adjustment upto 50 mm, comprising of modular load bearing floor panels supported on

G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the

architectural drawings, as specified and as directed by Engineer-in-charge consisting

of: (a) Providing at required spacing to form modular framework, pedestals made out of

GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the

G.I. Base plate of size 100 mm x 100 mm x 3 mm at the bottom of the pedestal tube,

G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud

mm outer diameter with two GI Check nuts screwed on the stud for level adjustment

upto 50mm, locking and stabilizing the pedestal head in position at the required level.

The pedestals shall be fixed to the subfloor (base) through base plate using epoxy

based adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of rectangular size

570x20x30x0.80 mm thick having holes at both ends for securing the stringers on to

the pedestal head using fully threaded screws ensuring maximum lateral stability in all

directions, the grid formed by the pedestal and stringer assembly shall receive the floor

panel, this system shall provide adequate solid, rigid support for access floor panel,

the system shall provide a minimum clear uninterrupted clearance between the bottom

of the floor for electrical conduits and wiring etc. all complete as per the architectural

drawings, as specified and as directed by the Engineer-in-charge. (c) Providing and

fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static

high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel

welded construction with an enclosed bottom pan with uniform pattern of

hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and

bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and

welds along each flange).

The panel should be Corroresist epoxy coated for lifetime rust protection and cavity

formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland

cementitious core mixed with light weight foaming compound. The access floor shall

be factory finished with Anti-static High Pressure laminate with Non Warp technology

upto 1 mm thickness for superior adhesion and Surface flatness within 0.75mm. The

panel is to withstand a Concentrated Load of 363 kgs applied on area 25 mm x 25 mm

without collapse in the centre of the panel which is placed on four steel blocks. The

panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and

an impact load of 50kg all complete as per the approved manufacturers specification

and as per the direction of Engineer-in-charge. All specification must be printed on the

side of the panel to ensure the quality of the product.

11.54.2 450 mm Finished Floor Height (FFH).

Total of sub-head

8 ROOF COVERING WORK

8.01 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone

aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1

cement: 3 fine sand) as per standard design:

a) In 75x75mm deep chase Metre 256.04 483.18

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

8.02 Making khurras 45x45cm with average minimum thickness of 5 cm cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size)

over P.V.C. sheet 1mx 1mx400 micron, finished with 12mm cement plaster 1:3 (1

cement : 3 coarse each 250.25 35.00

8.03 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to

be tempered to bring mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed. SQM 771.98 2581.08

Total of sub-head

9 CEILING & LINING WORK

9.01 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having

Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength

The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight

calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos

having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size

595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of

hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both

side) consisting of main ‘T’ runner suitably spaced at joints to get required length and

size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced

1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 600mm

and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle

of the 1200X600mm panel to form grid of size 600X600mm resting on periphery

walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm

made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to

centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick

Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services

like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required,

Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size

25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm

G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at

1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections

shall be pre-painted with polyester baked paint, for all heights, as per specifications,

drawings and as directed by engineerin- charge.Note:-

Only calcium silicate false ceiling area will be measured from wall to wall. No

deduction shall be made for exposed frames/opening (cut outs) having area less than

0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum)

for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85%

noncombustible as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity. 0.043° w/m KC.for the best thermal Insulation

9.02 Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using

water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender

channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x

mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at

457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at

edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting

cleat, joining compound top coat on ceiling incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail drawing as directed

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

9.03 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel

sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T”

runner with suitably spaced joints to get required length and of size 24x38 mm made

from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross

“T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced

between main “T” at 600 mm center to center to form a grid of 1200x600 mm and

secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick

(minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of

600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of

approved texture in the grid including, required cutting/making, opening for services

like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be

suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to

ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with

galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to

center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-

painted with polyester paint, all complete for all heights as per specifications, drawings

and as directed by Engineer-in-charge.

9.04 GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size

595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing

of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes

and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester

powder coated of thickness

60 microns (minimum), including factory painted after bending and perforation and

backed with a black Glass fiber acoustical fleece.

Total of sub-head

10 PLASTERING & POINTING WORK

10.01 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior

plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-

cement:3-sand) Sq m 137.27 8798.81

10.02 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or

half brick walls for interior plastering upto floor two level and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand) Sq m 181.91 18452.89

10.03 Providing 20mm thick cement plaster in single coat on single or half brick walls for

interior plastering upto floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) Sq m 233.18 4554.97

10.04 Extra over items 58 to 71 for plastering on ceilings and sofits of stairs upto floor two

level instead of plastering on walls. Sq m 25.80 8914.49

10.05 Extra over items 1 to 69, 71 to 87 and 90 for interior plastering above floor two level for

every additional storey height. (1) Single coat plaster Sq m x No. of stor ey 23.66 10026.26

10.06 Extra over items 1 to 69, 71 to 87 and 90 for interior plastering above floor two level for

every additional storey height.(2) Two coat plaster Sq m x No. of stor ey 26.96 3489.92

10.07 Extra over item 91 for plastering on ceiling and soffits of stairs above floor two level for

every additional storey height. Sq m 21.67 1478.88

10.08 Extra for plastering exterior walls of height more than 10m from ground level for every

additional height of 3m or part thereof sqm 73.08 1264.80

10.09 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface

to prepare the surface even and smooth complete sqm 262.70 26025.21

10.1 Painting with synthetic enamel paint of approved brand and manufacture of to give an

a) Two or more coats on new work sqm 130.81 869.15

Total of sub-head

11 WHITE WASHING COLOR WASHING DISTEMPER;ING & OTHER FINISHING

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

11.01 White washing with lime on wall surface (two coats) to give an even shade including

thoroughly booming the surface to remove all dirt, dust; mortar drops and other foreign

matter. Sq m 12.57 1940.00

11.02 Finishing wall with water proofing cement paint of on wall surfaces (Two coats) to give

an approved brand and manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt and remains of loose powered

materials. Sq m 64.67 4554.97

11.03 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth. Sq m 82.36 26781.74

11.04 Extra over item 57 for painting with plastic emulsion paint of approved brand on

ceilings and sloping roofs. Sq m 5.47 830.36

Total of sub-head

12 PAINTING & POLISHING WORK

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

12.01 Applying priming coat over new steel and other metel surface after and including

preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter

and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed

priming paint brushing red lead. Sq m 36.06 3000.00

12.02 Painting two coats (excluding priming coat) on new steel and other metal surface with

enamel paint, brushing, interior to give an even shade including cleaning the surface

an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

12.03 Painting two coats (excluding priming coat) on new steel and other metal surface with

synthetic enamel paint, brushing to give an even shade including cleaning the surface

of all dirt, dust and other foreign matter. Sq m 67.89 3000.00

12.04 Painting two coats (excluding priming coat) on external surface of new rain water, soil,

waste and vent pipes and fittings with ready mixed bituminous brushing, black,

anticorrosive to give an even shade including cleaning of all dirt, dust and other foreign

matter. (B) 75mm dia. Sq m 22.33 2523.12

12.05 Appliying priming coat over new wood and wood based surface after and including

preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter,

sand papering and knotting. (B) Ready mixed paint brushing wood primier pink.

12.06 Appliying priming coat over new wood and wood based surface after and including

preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter,

sand papering and knotting. (C) Ready mixed paint brushing priming for enamel

12.07 Painting two coats (excluding priming coat) on new wood and wood based surface with

enamel paint, interior to give an even shade including cleaning the surface of all dirt,

dust and other foreign matter sand papering and stopping. Sq m 91.47 20.16

12.08 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to

give an required shape even shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete sqm 73.10 25933.68

12.09 Applying two coats of putty & two coats of primer of approved brand and manufacture

on new wall surface to give an even shade including thoroughly brushing the surface

free from mortar dropping and other foreign matter and sand papered smooth.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall ceiling

and floor.(G)110 mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall ceiling

and floor.(G)160 mm

Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m with

excavation of size 1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete including brick

masonary wall in CM 1:6 of 0.75m height & 0.23m thick with 15mm thick cement

plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m with CRS

steel and 0.60mx0.45m cast iron manhole cover with frame weight not less than 35 kg

as per directed by Engineer-in-charge

Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m x1.20m &

excavation dimension of 2.82mx 1.96x1.35m including C.C 1:2:4 bed concrete of

0.15m thick including brick work in c.m 1:6 for 23cm thick wall including 15mm thick

Drilling in soil with lowering of pipes concrete sealing including gravel packing clay

12.14 breaking and development of bore with air compressor by required capacity vertical Rmt 390.00 90.00

test etc. complete including the cost of benimeter 250mm dia.

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

Supplying slotted PVC pipes of approved quality at site of work confirming to IS.

Total of sub-head

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

13 MISCELLANEOUS BUILDING ITEM WORK

13.01 Providing and supplying aluminium extruded tubular and other aluminium sections as

per the architectural drawings and approved shop drawings , the aluminium quality as

per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-

80 microns conforming to AAMA 2604 of required colour and shade as approved by

the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves,

screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra

shall be paid on this account). The weight of aluminium extruded section shall be taken

for purpose of payment.

13.02 Designing, fabricating, testing, protection, installing and fixing in position semi (grid)

unitized system of structural glazing (with open joints) for linear as well as curvilinear

portions of the building for all heights and all levels, including: (a) Structural analysis &

design and preparation of shop drawings for the specified design loads conforming to

IS 875 part III (the system must passed the proof test at 1.5 times design wind

pressure without any failure), including functional design of the aluminum sections for

fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice

plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather

silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured

EPDM gaskets for water tightness, pressure equalisation & drainage and protection

against fire hazard including: (b) Providing, fabricating and supplying and fixing panels

of aluminium composite panel

cladding in pan shape in metalic colour of approved shades made out of 4mm thick

aluminium composite panel material consisting of 3mm thick FR grade mineral core

sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium

composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /

Lumiflon based fluoropolymer resin coating of approved colour and shade on face #

and polymer (Service) coating on face # 2 as specified using stainless steel screws,

nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. “ (c) The

fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with

serrations and serrated washers to arrest the wind load movement, fasteners, SS

Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-

metallic contacts all complete required to perform as per specification and drawing The

item includes cost of all material & labour component, the cost of all mock ups at site,

cost of all samples of the individual components for testing

in an approved laboratory, field tests on the assembled working curtain wall with

aluminium composite panel cladding, cleaning and protection of the curtain wall with

aluminium composite panel cladding till the handing over of the building for occupation.

The Contractor shall provide curtain wall with aluminium composite panel cladding,

having all the performance characteristics all complete, as per the Architectural

drawings, as per item description, as specified, as per the approved shop drawings

and as directed by the Engineer-in-Charge. “However, for the purpose of payment, only

the actual area on the external face of the curtain wall with Aluminum Composite Panel

Cladding (including width of groove) shall be measured in sqm. up to two decimal

"Note : The following performance test are to be conducted on ACP system if area of

ACP system exceeds 4500 Sqm from the certified laboratories accreditated by NABL

(National Accreditation Board for Testing and Calibration Laboratories), Department of

Science & Technologies, India.

The NIT approving authority will decide the necessity of testing on the basis of cost of

the work, cost of the test and importance of the work. Performance Testing of ACP

system Tests to be conducted in the NABL certified laboratories 1. Performance

Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per

ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr“ 2. Static

Water Penetration Test. (50pato 1500pa) as per ASTME- 331-09 testing method for a

range upto 2000 ml.“ 3. Dynamic Water Penetration (50pato 1500pa) as per AAMA

501.01-05 testing method for a range upto 2000 ml“ 4. Structural Performance

Deflection and deformation by static air pressure test ( 1.5 times design ind pressure

without any failure) as per ASTME-330-10 testing method for a range upto 50 mm“

Seismic Movement Test (Upto 30 mm) as per AAMA 501.4-09 testing method for

Qualitative test. Tests to be conducted on site 6. Onsite Test for Water Leakage for a

pressure range 50 kpa to 240 kpa (35 psi) upto 2000 ml"

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

13.03 Providing, assembling and supplying vision glass panels (IGUs) comprising of

hermetically-sealed 6-12-6 mm insulated glass (double glazed) vision panel units of

size and shape as required and specified, comprising of an outer high performance

heat strengthened float glass 6mm thick, of approved colour and shade with reflective

coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear

float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and

secondary seal (structural silicone sealant) etc. all complete for the required

performances, as per the Architectural drawings, as per the approved shop drawings,

as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled

in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in

the curtain glazing is included in cost of item No.1)

For payment, only the actual area of glass on face # 1 of the glass panels (excluding

the areas of the grooves and weather silicone sealant) provided and fixed in position,

shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with

reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear

Glass of approved make having properties as visible Light transmittance (VLT) of 25 to

35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading

coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of

performance glass shall be decided by technical sanctioning authority as per the site

13.04 Extra for openable side / top hung vision glass panels (IGUs) including providing and

supplying at site all accessories and hardwares for the openable panels as specified

and of the approved make such as heavy duty stainless steel friction hinges, min 4 -

point cremone locking sets with stainless steel plates, handles, buffers etc. including

necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as

per the Architectural drawings, as per the approved shop drawings, as specified and as

directed by the Engineer- in-Charge.

13.05 Designing, fabricating, testing, installing and fixing in position Curtain Wall with

Aluminium Composite Panel Cladding, with open grooves for linear as well as

curvilinear portions of the building , for all heights and all levels etc. including:

(a) Structural analysis & design and preparation of shop drawings for pressure

equalisation or rain screen principle as required, proper drainage of water to make it

watertight including checking of all the structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminiumcomposite panel

cladding in pan shape in metalic colour of approvedshades made out of 4 mm thick

aluminium composite panel material consisting of 3 mm thick FR grade mineral core

sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium

panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon

based fluoropolymer resin coating of approved colour and shade on face # 1 and

polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts,

washers, cleats, weather silicone sealant, backer rods etc.

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised

with serrations and serrated washers to arrest the wind load movement, fasteners, SS

316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-

metallic contacts all complete required to perform as per specification and drawing The

item includes cost of all material & labour component, the cost of all mock ups at site,

cost of all samples of the individual components for testing in an approved laboratory,

field tests on the assembled working curtain wall with aluminium composite panel

cladding, cleaning and protection of the curtain wall with aluminium composite panel

cladding till the handing over of the building for occupation. Base frame work for ACP

cladding is payable under the relevant aluminium items.

The Contractor shall provide curtain wall with aluminium composite panel cladding,

having all the performance characteristics all complete , as per the Architectural

drawings, as per item description, as specified, as per the approved shop drawings

and as directed by the Engineer-in-Charge. However, for the purpose of payment, only

the actual area on the external face of the curtain wall with Aluminum Composite Panel

Cladding (including width of groove) shall be measured in sqm. up to two decimal

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

13.06 Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw

cut with machine cut edges sand stone) on walls at all heights using M.S. square/

rectangular tube in the required pattern as per architectural drawing, including cost of

cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of

M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and

embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4

graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost

of necessary centring and shuttering and with approved expansion hold fasteners on

CC/RCC surface, including drilling

necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to

support stone cladding, the steel work will be given a priming coat of Zinc primer as

approved by Engineer-in-charge and painted with two or more coats of epoxy paint

(Shop drawings shall be submitted by the contractor to the Engineer-in-charge for

approval before execution). The frame work shall be fixed in true horizontal & vertical

lines/planes. (Only structural steel frame work shall be measured for the purpose of

payment, stainless steel cramps shall be paid for separately and nothing extra shall be

13.07 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias

and similar locations of required size, approved shade, colour and texture laid over

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry/Ruby red

Area of slab over 0.50 sqm

13.08 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required

shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved

design/pattern, with approved standard section and fixed to the existing window frame

with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting

the grill to proper opening size for fixing and operation of handles and fixing approved

anodised aluminium standard section around the opening, all complete as per

requirement and direction of Engineer-in-charge. (Only weight of grill to be measured

13.09 Providing and fixing of façade at all heights with extruded hollow Clay / Terracotta

ventilated rainscreen tiles of height 250/ 300/ 400 mm and length of 595 mm of

approved texture,design and pattern having Flexural Strength/ Modulus of Rupture of ≥

14 N/m² and maximum water absorption of 10% tested as per ISO 10545-4:2004(E)

and ISO 10545-3:1995 respectively in true level fixed to a supporting aluminium

framework(Alloy 6063 T5/T6) consisting of vertical ‘T’ (for intermediates)/ ‘L’(for ends/

termination)/ Tubular sections (at corners)of size 80x60x2 mm/ 40x60x2 mm / 40x40x2

mm respectively, spaced at maximum spacing of 600 mm c/c matching to the tile

vertical grid, and horizontal aluminium ‘C’-clamps of size 56x25x2 mm thickness of

length 150 mm at junction of tiles and of length 75 mm at wall ends/ corners fixed on

top of the vertical sections at spacing of 250/ 300/ 400 mm c/c matching to the tile

horizontal grid with two numbers of self-drilling / self-tapping SS screws of size 5.5x25

mm with EPDM washers. The vertical ‘T’/’L/ Tubular’ sections shall be fixed to the wall

(hot-dip-galvanized) steel L-brackets (galvanizing thickness of minimum 80 microns)of

size 110x80x6 mm at intermediate vertical aluminium profiles and of size 220x110x12

mm at outer corners and stainless steel grade 304,M10 full threaded anchor fasteners

with nylon sleeve 100 mm long (for brick work) and M8 expansion anchor fasteners

mm long for concrete surface, spacing of brackets to be based on a structural/ static

calculation. The brackets shall be of length 175 mm at junction of two vertical

aluminium profiles and of length 100 mm at intermediate points of vertical profiles and

shall be fixed to the vertical aluminium T / L / Tubular profiles using two numbers self-

drilling/ self-tapping SS screws of size 5.5x25 mm with EPDM washers. EPDM gaskets

to be fixed in between brackets and vertical profiles. The tiles shall be mounted on the

‘C’ clamps such that the tiles are supported at top and bottom at both ends.

SUBHEAD-1 CIVIL WORK INCLUDING LANDSCAPE

S. No. DESCRIPTION UNIT RATE Quantity Amount

The tiles shall be additionally secured to the horizontal ‘C’ clamps using special SS

clips of required size which shall be inserted and pressed into position on the ‘C’

clamps holding the tiles and the cut-tiles shall be glued at points to the horizontal ‘C’

clamps by using MS Polymer sealant adhesive. The vertical joint open groove between

two adjacent tiles shall be 5 mm. The tiles and system shall be designed to resist wind

load as per IS 875 (Part 3) according to different zones. The tiles shall be installed

using the ventilated rain screen principle with provision for natural ventilation of the

space between the façade tiles and the structural wall. The work shall be carried out as

per specification,

drawing and as per direction of the Engineer-in-Charge. Note : Scaffolding wherever

required to be paid separately

With 16 mm thickness (+/- 10%) terracotta tiles of other than grey colors

Total of sub-head

WOOD WORK & JOINERY WORK

STEEL ALUMINUM & IRON WORK

PAVING & FLOOR FINISHES WORK

ROOF COVERING WORK

CEILING & LINING WORK

PLASTERING & POINTING WORK

WHITE WASHING COLOR WASHING DISTEMPER;ING & OTHER FINISHING

PAINTING & POLISHING WORK

MISCELLANEOUS BUILDING ITEM WORK

Subhead-2 Plumbing Works

Sl. No Subhead AMOUNT

Grand Total (Without GST)

Grand Total (Without GST)

BILL OF QUANTITIES OF PLUMBING

S.No. Item Description

Unit Total Quantity Rate Amount

Providing and fixing wsh down water closet (European type,

W.C. Pan) with integral P or S trap including jointing the

1 trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine Nos 72 1343.38

sand) (Seal and cover to be measured and paid for

separately)(A) vitreous China Pattern :(i) in white colour

Providing and fixing plastic seat and cover for wash down

2 water closer with C.P. brass hinges and rubber buffers. (B) Nos 72 288.45

Black plastic seal and cover.

3 Providing and fixing toilet paper holder.(A) C.P. Brass Nos 72 372.1

Providing and fixing 12.5 Litres low level flushing cistern

with a pair, of C.I. or Mild brackets, complete with fittings

such as lead valve less syphon, 15mm nom.nal size brass

ball valve with polythene float, C.P brass handle unions and

couplings for connections, with inlet, outlet and overflow

pipes, 40mm dia. porcelain enamelled flush bend including

cutting holes in walls and making good the same

connecting the flush bend with cistern and closet (overflow

pipe to be measured and paid for separately)(A) Vitreous

China (I) In white colour

Providing and fixing washbasin with single hole for pillar

tap with C.I. or M.S. brackets painted white including

5 sutting holes and making good the same but excluding Nos 72 1511.53

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm

x v 400mm size. (i) In white colour.

Providing and fixing chromium plated, bottle trap with

necessary couplings of approved quality for wash basin.

7 Providing and fixing Rubber plug for sink or wash basin. Nos 77 16.98

Providing and fixing Kitchen sink with C.I. or M.S. brackets,

painted white including cutting holes in walls and making

good the same but excluding fittings. (C) Vitreous China

Sink.(i) 600mm x 450mm x 150mm size (H/C mixer)

Providing and fixing C.P. brass waste for washbasin or sink.

Providing and fixing M.I. fisher union for washbasin or sink.

Providing and fixing screw down bib taps of following

11 size.(B) Brass chromium plated screws down Bib Tap. (i) Nos 72 184.98

Providing and fixing Urinal or approved quality including

conecting the Urinal with waste pipe , tap etc. complete.(A)

White earthenware flat back or corner type size 430mm x

13 Providing & fixing CP Brass shower rose with 15 mm or 20 mm inlet Nos 6 279.37

INTERNAL WATER SUPPLY

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

14 Foundation (NSF) seal for potable water of following dia. Rmt 509.9 168.67

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete.[A] 15 mm.(Inside the

BILL OF QUANTITIES OF PLUMBING

S.No. Item Description

Unit Total Quantity Rate Amount

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [B] 20 mm..(Inside the

toilet & Vertical in shaft)

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [C] 25 mm..(Inside

the toilet & Vertical in shaft)

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [D] 32mm.(Inside the

toilet & Vertical in shaft)

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [E] 40mm.(Vertical in

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

19 Foundation (NSF) seal for potable water of following dia. Rmt 28 654.04

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [F] 50mm..(Vertical in

25mm Air release valve as per IS:14845 ISI

Marked (Domestic loop gravity,Hydropnumatic,Flushing) Nos

Supplying, fixing, testing and commissioning of

butterfly valve of PN 1.6 rating with bronze/gunmetal

21 seat duly ISI marked complete with nuts, bolts,

washers, gaskets conforming to IS 13095 of

following sizes as required :

INTERNAL DRAINAGE & EXTERNAL DRAINAGE

BILL OF QUANTITIES OF PLUMBING

S.No. Item Description

Unit Total Quantity Rate Amount

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on

22 wall using of PVC clamp of the size 160 mm diametre x 210 Rmt 274.8 826.12

mm length x 196 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.(Soil & Waste ,RWP Pipe

diversion at 1st basement ceiling level)

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

110 mm (Inside the toilet-Soil+Basement header connection) Rmt 198.903 1043

110 mm (Vertical in shaft-Soil) Rmt 286 1043

110 mm (Vertical in shaft Waste+Basement header connection-Soil Rmt 369 1043

Providing and fixing PVC SWR Nahni trap IS 14735 for Nos

drain - 100 mm diameter with jali of the following nominal

24 diameter of self cleansing design with C.I scread down or 114 726

hinged grating including the cost of cutting and making

good the walls.

Providing and fixing S.W. gully trap with C.I. grating brick Nos

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps. (A) 100mm x 100mm size P type.

BILL OF QUANTITIES OF PLUMBING

S.No. Item Description

Unit Total Quantity Rate Amount

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends

prepared for collar joints including testing of joints

complete.(B) 150mm (Basement +Ground Storm water exit & entry

& sewer manhole to manhole connection & 2nd floor RWP pipe

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-

cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse

sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement :2-

Coarse sand :4-stone aggregate 20mm nominal size) finished

smooth complete including curing and festing (i) Inside size

900mm x 1200mm and 1.5M. deep including C.I. cover with

frame size 560mm diameter total weight of cover and frame

to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of

frame 64 Kg.)(A) With 230mm thick walls of brick msonry

using brick having crushing strength not less than 35Kg. /

Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (3)

C type depth 2.25 Metre for 150mm diameter sewer.

Supplying, installation, testing and commissioning of STP/ETP of

appropriate technology including civil works (except plant room),

Plant size upto 50KLD set 1 3146501

Total Amount 3671.603 3189544.3

Total Amount 3671.603 3189544.3

BILL OF QUANTITIES OF PLUMBING

S.No Item Description Unit

QUANTITY Rate Amount

Providing, fixing, testing and commissioning of ABS Chrome plated Brass

Hand Shower (Health Faucet) of approved make and quality and as

approved by Engineer - In - Charge, including 8 mm dia, 1 to 1.5 Meter long

Flexible tube & wall hook including cutting and making good the walls

wherever required complete with necessary accessories as per directions of

the Engineer In charge.

Providing, fixing, testing and commissioning of C.P brass pillar cock with

single lever hot and cold mixer (Flowrate as 5.0 Lit per min AT 3.0 bar) for

2 Kitchen Sink of approved make and quality, and as approved and directed by Each 7.00 8500.0

the Engineer In charge, including CP wall flanges and all necessary materials

required for fixing and making good as required.

Providing and fixing of 15mm Eachminal bore CP Brass Angle valve with CP

wall flanges and confirming to IS: 8931, for wash basins, water coolers,

geyser points, etc of approved quality and as approved by and directed by

the Engineer In charge.

15mm Eachminal bore (WC+Wash Basin+Sink) Each 149.00 1350.0

Providing, fixing, testing and commissioning of S.S. Double coat hook of

4 approved make, fixed to PVC cleats with C.P. brass screws etc.all Each 59.00 850.0

necessary accessories complete as per directions of the Engineer In charge.

Providing, fixing, testing and commissioning of Chrome plated brass battery

operated automatic Liquid Soap Dispenser with 1 litre capacity of approved

5 make and quality, and as approved by the Engineer, including all necessary Each 24.00 4300.0

materials required for fixing. All complete as per directions of the Engineer

Providing, fixing, jointing, testing and commissioning of CPVC (Chlorinated

Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR

(operating pressure - 7 Bar @ 82 Deg C and 28 Bar @ 23 Deg C) for pipes

from 1/2 Inch to 2 Inch. Schedule 40 Pipe to be used from 2-1/2 Inch to

Inch. Pipes shall be joined using solvent welded CPVC Sch-80 fittings as per

ASTM F 439 i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc.

including transition fittings (connection between CPVC & metal pipe/GI) i.e.

6 Brass Adaptors (both Male & Female threaded) conforming to ASTM D- - - -

2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-

493. All termination points for installation of faucets shall have brass

termination fittings. Installation shall be to as per Technical Manual of

manufacturer of pipes & fittings.(includes chasing, hyradullic testing and

making good/finish in all respect the demolished portion).Endcaps/plugs

required to be put at all open ends post completion of work till the final

commisioing to avoid debris entering into pipes.

65 mm dia Rmt 21.00 1650.0

Providing, fixing, Testing and commissioning of Ball valve of forged Brass

7 body, Chrome plated Brass ball, Full bore construction, BSPT Female - - -

threaded connection (In shaft, after loop)

15 mm dia Each 2.00 589.8

20 mm dia Each 25.00 775.4

25 mm dia Each 15.00 1150.0

32 mm dia Each 4.00 1529.7

40 mm dia Each 13.00 1939.8

BILL OF QUANTITIES OF PLUMBING

S.No Item Description Unit

QUANTITY Rate Amount

50 mm dia Each 8.00 2600.0

Providing, fixing, jointing and testing in position the following U-PVC pressure

threadedsolvent cement joint Pipes as per ASTM D 1785 Schedule 40 and

threaded conforming to IS:554. Cut to required lengths including all necessary

fittings and specials such as bends, tees, unions, reducers, flanges and plugs etc.

The pipes & fittings shall be tested to a pressure of 15 Kg/Sq.cm. Fixing at wall/

8 ceiling level supported by clamps, fastener, hangers etc. as per specification. - - -

Cutting hole in wall / floor slab and making good the same with cement concrete

1:2:4 complete as required. GI heavy class pipe sleeve of larger diameter shall be

provided wherever the pipes crossing the walls/floor slab and sealing the sleeves

as per consultants requirement. Threading, jointing & making proper

40 mm dia (Admin bldg to Fire bldg Hydropnumatic domestic line) Rmt 265.00 752.40

50 mm dia (UGT to OHT Pump Room to vertical shaft-Domestic &

Flushing)+STP flushing tank to fire bldg

65 mm dia (Terrace & Fourth floor Loop Domestic -Gravity) Rmt 352.00 1,038.40

100mm dia (Terrace & fourth floor loop Flushing -Gravity) Rmt 176.00 2,466.20

80 mm dia ( External Water Supply to UGT) Rmt 80.00 1,687.40

Providing, fixing, testing and commissionig of Thermal insulation (Nitrile

Rubber of density 40 kg/m³) and propritery polyshileld outer mechanical

protection on Nitrile rubber insulation comprising of wrapping with poly glass

9 tape helically wound and subsequently applying two coats of polyshield - - -

material (Rasing and hardner) as per manufactureres specifications and

approved by Project manager/Consultant. (Inside the toilet-for shower,

condensate drainage pipes).

15 mm dia (9 mm thickness) Rmt 17.00 479.60

32 mm dia ((13 mm thickness) Rmt 35.00 585.20

50 mm dia (13 mm thickness) Rmt 120.00 688.60

Providing, fixing, jointing, testing and commissioning of Water Meter with

direct reading dial in KL for cold water line with all necessary fittings such as

threaded pieces, unions, 1 Each. pressure gauge with ball valve, 1 Each.

NRV, 2 Each. isolation valve at inlet and outlet, flanges piece for future

removal, flanges/ unions complete with all necessary testing charges and

obtaining test certificates from municipal authorities, on following size pipe

10 lines. The water meter shall have RS-485/Modbus/BACnet over IP/ BACnet - - -

over MSTP port to integrate with Building Management System without any

external hardware/converter requirement. Technical integration details shall

be provided by Plumbing contractor to BMS contractor and ensure proper

integration is done, it shall also comply to ISO 4064 standard, feasible for

class B or Class A installation with all necessary accessories, as per

specification/drawings and as directed by Engineer In Charge.

32 mm dia Each - - -

40 mm dia Each - - -

50 mm dia Each 5.00 61600.0

80 mm dia Each 1.00 97900.0

Providing, fixing, jointing, testing and commissioning of 600 mm dia ductile

iron (Medium Duty) water tank circular cover with frame (as per EN-124)

11 with lockable arrangement complete in all regards with all necessary Each 15.00 7800.0

accessories, as per specification/drawings and as directed by Engineer In

BILL OF QUANTITIES OF PLUMBING

S.No Item Description Unit

QUANTITY Rate Amount

Providing, Fixing, Jointing, testing and commissioning of uPVC Type-B SWR

push fit pipes as per IS 13592, solvent joint for sunken or push fit type for

suspended with moulded fittings as per IS-14735, concealed in wet or dry

walls including all fittings such as bends in proper alignment, Y, Tee,

junction, vent cowls, offset, access pieces (Plain or door), etc. As per

12 approved shop drawing. Cost shall includes fixing at wall / ceiling level - - -

making holes complete with necessary hydraulic test. All pipe supports shall

be of MS hot dip galvanised with 85 micron galvanisation with rubber

insert(sizes indicated are Eachminal outside diameter).Endcaps/plugs

required to be put at all open ends post completion of work till the final

commisioing to avoid debris entering into pipes.

200 mm dia (Diversion at 1st basement ceiling level+Rainwater bypass line

connected to the ground floor storm water & Pipe diversion at 2nd floor Rmt 215.00 2400.0

Providing, Fixing, Jointing, testing and commissioning of uPVC Type-B SWR

push fit pipes as per IS 13592, solvent joint for sunken or push fit type for

suspended with moulded fittings as per IS-14735, concealed in wet or dry

walls including all fittings such as bends in proper alignment, Y, Tee,

junction, vent cowls, offset, access pieces (Plain or door), etc. As per

13 approved shop drawing. Cost shall includes fixing at wall / ceiling level - - -

making holes complete with necessary hydraulic test. All pipe supports shall

be of MS hot dip galvanised with 85 micron galvanisation with rubber

insert(sizes indicated are Eachminal outside diameter).Endcaps/plugs

required to be put at all open ends post completion of work till the final

commisioing to avoid debris entering into pipes.

75 mm (In Toilet-Waste Pipe) Rmt 293.31 489.8

Providing, Fixing, Jointing, testing and commissioning of uPVC Type-A SWR

Push fit pipes confirming to IS 13592 on exposed wall faces including all

fittings confirming to IS 14735 such as bends, tees, clamps, cowls etc. as

per approved shop drawing. The cost shall inclusive of cutting holes and

14 making good the walls satisfactory. All pipe supports shall be of MS hot dip - - -

galvanised with 85 micron galvanisation with rubber insert (sizes indicated

are Eachminal outside diameter).Endcaps/plugs required to be put at all

open ends post completion of work till the final commisioing to avoid debris

entering into pipes. (For Vent in Shaft area)

80 mm dia (Vent Pipe) Rmt 284.00 434.7

Providing, fixing, jointing, testing and commissioning of UPVC pipe

(connecting waste pipe from Wash basin, Urinal waste pipe and for Planter /

landscape drain) conforming to IS : 4985 (Pipe Class III - 6 kg / sq.cm) cut to

required lengths including all necessary fittings as per IS 7834 and specials

such as bends, junctions offsets, access pieces (plain or door). Fixing at

wall / ceiling level supported by G.I. clamps, hangers etc. duly epoxy coated.

32 mm dia Rmt 35.00 144.9

40 mm dia Rmt 88.00 175.4

50 mm dia Rmt 228.00 198.3

Sump Pump Discharge- Surface - - -

110 mm dia (Dewatering Pump & Domestic & Flushing Pump Room sump

Providing, fixing, jointing, testing and commissioning of PVC clean out plug

16 with all necessary accessories as per specification/ drawings and directed - - -

by Engineer In charge.

100 mm dia (Soil Pipe in the toilet) Each 17.00 400.0

75 mm dia (Waste Pipe In the Toilet) Each 14.00 300.0

BILL OF QUANTITIES OF PLUMBING

S.No Item Description Unit

QUANTITY Rate Amount

Providing & fixing rain water parapet outlets size as given in the drawings

suitable for the outlet sizes as mentioned below. Required depth with lead

17 flashing around the pipe with one piece lead sheet of 3 mm thick set on a - - -

layer of cold bitumen along with CI grating, threaded adaptor for spigot

connection etc. as per drawing complete as required.

100 mm dia outlet Each 2.00 2700.0

150 mm dia outlet (Fourth floor & Roof ) Each 14.00 4300.0

Providing, fixing, testing and commissioning of pre-fabricated grease

18 intercepter suitable for underground / floor mounted application, - - -

conforming to EN 1825 / DIN 4040-100.

Flow rate: 1.0……….. l/s Each 1.00 75000.0

Flow rate: 1.5……….. l/s Each 1.00 95000.0

Supply & Installation of Ductile Iron Heavy Duty Manhole Cover (Heavy

19 duty) internal dimensions, with lifting hooks , Frame with cover (For - - -

Basement & Ground storm water)

450 X 450 mm ( Basement Storm + Ground Planter) Each 12.00 8000.0

600x600 mm (Ground Floor -Flow Transition) Each 5.00 10300.0

Providing and fixing over straight or curved drain MS Hot dipped

Galvanized grating bolted with fixed frame of angle 40mm x 40mm x 5mm

size fixed to concrete with 25mm x 3 mm hold fasts approx. 100 mm long

welded at interval of 600 mm and welded cross braced at 1200 mm

20 interval by 40 mm x 5 mm thick MS flats. The removable grating shall be - - -

made of with outer frame of size 600 mm long with M.S. flats of 32mm x

5mm having welded cross members on one direction with M.S. flats of

size 32mm x 5mm at a spacing of 30 mm c/c. Including hot dip galvanising

upto 85 micron.(Basement & Ground)

300mm wide (At Basement) Rmt 165.00 1650.0

450 mm wide (At Ground) Rmt 495.00 2250.0

Construction, testing and commissioning of conical manholes meeting the

intents of the specifications and drgs. complete with:

i) 1:4:8 cement concrete foundation.

ii) brick masonry wall in 1:5 cement mortar.

iii) 20mm plaster, inside & outside in 1:3 cement mortar with water proof

iv) 1:3:4 cement concrete benching and channelling.

v) PVC rungs @ 300mm c/c.

vi) DI Heavy Duty Frame & Cover confirming to BSEN–124 standard and

600 t.d, 900 b.d & 375mm wall and depth not exceeding 1650mm with

600mm dia Frame & Cover

WATER TANK ACCESSORIES - - -

Providing and fixing 600 mm long MS hot dip galvanized PUDDLE FLANGES

fabricated out of 6 mm thick MS plates of suitable size and IS:1239 heavy class

pipes properly fixed in walls & top slab of tanks. The entire fittings shall be hot

dipped galvanized after fabrication. Length shall be minimum 600 mm or wall

thickness plus 200 mm on either side (which ever is more) as per specification/

drawings and as directed by Engineer In charge.

50 mm dia (flanged ends) Each 14.00 2200.0

BILL OF QUANTITIES OF PLUMBING

S.No Item Description Unit

QUANTITY Rate Amount

65 mm dia (flanged ends) Each - 2600.0 -

80 mm dia (flanged ends) Each 2.00 2800.0

100 mm dia (flanged ends) Each 59.00 2900.0

150 mm dia (flanged ends) Each 16.00 3800.0

200 mm dia (flanged ends) Each 2.00 4400.0

250 mm dia (flanged ends) Each 2.00 5400.0

Rate (In Words) : Rupees - - -

300 mm dia (flanged ends) Each - - -

Rate (In Words) : Rupees - - -

Providing and fixing blank flanges, making flanged joints with bolts, nuts, washers

and rubber insertion 3 mm thick, testing the flange and joints etc. complete for pipes

of following diameter as per specification/ drawings and as directed by Engineer In

50 mm dia Each 1.00 239.8

Rate (In Words) : Rupees - - -

65 mm dia Each 1.00 275.4

Rate (In Words) : Rupees - - -

80 mm dia Each 1.00 329.7

Rate (In Words) : Rupees - - -

100 mm dia Each 1.00 450.0

Rate (In Words) : Rupees - - -

150 mm dia Each 1.00 650.0

Rate (In Words) : Rupees - - -

Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS:

1786, having minimum cross section as 23 mmx25 mm and over all

minimum length 263 mm and width as 165 mm with minimum 112 mm

space between protruded legs having 2 mm tread on top surface by ribbing

or chequering besides necessary and adequate anchoring projections on tail

24 Lumpsum 200.00 450.0

length on 138 mm as

per standard drawing and suitable to with stand the bend test and chemical

resistance test as per specifications and having manufacture's permanent

identification mark to be visible even after fixing, including fixing in manholes

with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand :

6 graded stone aggregate 20 mm Eachminal size) complete as per design

Providing and fixing in position G.I. vent with brass mosquito proof coupling and

air filter including return bend, complete as required. The entire fitting shall be hot

dip galvanised with all necessary accessories, as per specification/drawings and as

directed by Engineer In Charge.

100 mm dia (UGT +OHT) Each 9.00 2100.0

BILL OF QUANTITIES OF PLUMBING

S.No Item Description Unit

QUANTITY Rate Amount

Supply & Installation of UG tank double door Access Cover for 600 mm x

600 mm door to open outside of tank, manhole cover frame made of

guage Jindal make aluminium section of 50mm X 25mm with 5mm good

quality aluminium sheet inserted between the frame for avoiding unwanted

foriegn particles entering into the tanks, heavy duty SS hinges with stopper

for lock and key arrangement complete in all respect the whole aluminium

frame and sheet will be factory anodised before fixing on the place for Fire,

Domestic, Flush water tank (Top Manhole) UGT+OHT

PUMPS AND ACCESSORIES - - -

Supplying, installing, testing and commissioning of Water Transfer Pump

for Tank Filling SS horizontal multistage centrifugal pump. Each pump shall

have TEFC1450 RPM three phase electric motor. The pump shall have cast

Iron head, SS base, SS Shaft/ Impeller/ Intermediate chamber. Pump shall

be provided with mechanical seal. The pump shall be suitable for auto/

manual operation.

Flow rate : 3.0 LPS (1 Working +1 Stand By) Set 1.00 130000.0

Head : 45 Mts - - -

Purpose : Domestic water transfer pump - - -

Flow rate : 3.0 LPS (1 Working +1 Stand By) Set 1.00 130000.0

Head : 45 Mts - - -

Purpose : Flushing water transfer pump - - -

Flow rate : 5.0 LPS (1 Working +1 Stand By) Set 1.00 90000.0

Head : 30 Mts - - -

Purpose : Rain Water water transfer pump - - -

Complete (Skid mounted , wall mounted / floor mounted) electrical control

panel comprising of all accessories such as Cyclic Timer, Contactors, Single

Phasing Preventers, Overload Relays, Push Buttons, Voltmeter, Ammeter,

with Selector Switches, A/M Swich, Main Incomer Switch, Dry Pun Each 3.00 55000.0

Preventers with float switches, Overflow control with Float Switches,

control wiring upto tank and any other necessary imports etc. (list to be

provided by the vendor)

Accessories like NRVs, isolating valves, SS-304 (non-Magnetic) suction and

delivery header, pressure gauge, MS base frame (Synthetic enamel painted Set 3.00 52000.0

over a coat of primer) has to be provided.

Terrace Booster Pump system - - -

Supply, Installation, Testing And Commissioning Of Compact Self

28 Contained Skid Mounted factory fitted & factory tested Hydropneumatic - - -

Booster Pump System As Follows:

In-Line, Multisage, centrifugal pumps with SS-304 casing and impeller and

SS-316 shaft, CI base & head TEFC motor (with mechanical seal)

(Vendor to submit performance curves and technical catalog of the

proposed model for review & information)

The pump shall be selected for performance at best efficiency point.

However, the pump selection shall be suitable for performance with set - - -

point @ + 20% of the rated head.

BILL OF QUANTITIES OF PLUMBING

S.No Item Description Unit

QUANTITY Rate Amount

Flow rate :3.0 LPS (1Working + 1 Standby) - - -

Head : 35 meter (H) - - -

Purpose : Domestic Terrace Booster for 4th & 3rd Floor Set 1.00 95000.0

Flow rate : 2.0 LPS (1Working + 1 Standby) - - -

Head : 35 meter (H) - - -

Purpose : Domestic Hydrpnumatic pumps for Fire Bldg Set 1.00 85000.0

Flow rate :1.5 LPS (1Working + 1 Standby) - - -

Head : 35 meter (H) - - -

Purpose : Flushing Hydrpnumatic pumps for Fire Bldg Set 1.00 68000.0

External Pump mounted or wall mounted microprocessor PID controller and

frequency inverter integrated in a single body or as separate components

with pressure sensor transmitter minimum two lined LCD display, diodes to

indicate pump ready, pump running and fault and capable to communicate

with other controllers following MODBUS-RTU or BACNET Class-2 protocall - - -

through RS485 port (Variable Frequency Drive ). System should be

capable to compensate for frictional losses at lower flows. All alarms

should be displayed in the controller. System should be equiped with dry

running protection.

Complete (Skid mounted wall mounted / floor mounted) electrical control

panel comprising of all accessories such as PLCs, pressure switches,

pressure transducers, control wiring and any other necessary imports etc. Each 3.00 35000.0

(list to be provided by the vendor). Panel Should be with IP 54 Class of

Precharged diaphram pressure vessel with food grade membrane, charging

connection, connected to outlet header with necessary flanges, gaskets, Each 3.00 30000.0

isolating valves, nuts/bolts etc complete.

Set of accessories such as pressure switches, pressure transducers, inter

connecting power and control cabling etc. complete

Accessories like NRVs, isolating valves, SS-304 (non-Magnetic) suction and

delivery header, pressure gauge, MS base frame (Synthetic enamel painted Set 3.00 24000.0

over a coat of primer)

Booster Pump System as described above - - -

Submersible Centrifugal Non-clog Drainage Pumps - - -

Supply, installation, testing and commissioning of submersible pumps As

Supply, installation, testing and commissioning of continuous duty

Submersible Centrifugal Eachn-clogging or vortex type drainage pumps

complete with 3 phase motor with all necessary protection and mechanical

seal as per manufacturer standard etc. Pumps set shall have auto coupling

assembly. The installation shall be complete with all necessary

indigeEachus accessories as required to complete the installation with

pressure gauge in the discharge line as per specification/drawings and as

directed by Engineer In Charge

Contractor shall provide pump lifting arrangement shall comprise of MS

galvanized guide bar & MS assembly with SS 304 chain with shakle suitable

for 2 Each. submersible drainage pumps in a sump of overall depth Eacht

more than 2.0 m,

BILL OF QUANTITIES OF PLUMBING

S.No Item Description Unit

QUANTITY Rate Amount

1 Set : (1 Duty + 1 Assist) - - -

Total flow rate of system: 10.0 LPS - - -

Flow rate : 5.0 LPS each - - -

Head : 30 Mts - - -

Solid Handling : 25 MM - - -

Location : Plantrooms - - -

Purpose : Plant Room Drainage (Fire ,Domestic +STP Flushing Pump

MOC : CI -Body, C.I impeller & SS shaft - (420 or 431) - - -

Rate (In Words) : Rupees - - -

1 Set : (1 Duty + 1 Assist) - - -

Total flow rate of system: 10.0 LPS - - -

Flow rate : 5.0 LPS each - - -

Head : 30 Mts - - -

Solid Handling : 25 MM - - -

Location : Basement and trench - - -

Purpose : Basement Drainage for Fire Zone ( 2 Nos of dewatering

MOC : CI -Body, C.I impeller & SS shaft - (420 or 431) Set 2.00 178000.0

Rate (In Words) : Rupees - - -

Supply, installation, testing and commissioning of Automatic Level Control

system including level indicator with BMS compatibility consisting of

following items 1.1) Water Level Float Switch single sensor (low /high) with

NO/NC contacts 1.2) Control Box 24V,1.3) Necessary cabling ie (From float

switches (UGT & OHT) to control panel, control panel to valves and control

panel to pump & main power supply to control panel) 1.4) On-Off Type

Motorized Butterfly Valve (100 MM dia), Solenoid valve (50 mm dia and

below) and other neccessary accessories to make system complete as per

specification/drawings and as directed by Engineer In Charge. (For UGT -

Potable, Non-potable , For OHT - Potable & Non Water)

Providing, fixing, jointing, testing and commissioning of Automatic Level

Control system including level indicator with BMS compatibility consisting

of following items 1.1) Water Level Float Switch single sensor (low /high)

with NO/NC contacts. 1.2) Control Box 24V ,1.3) Necessary cabling i.e

31 (From float switch to control panel, panel to valves & main power supply to Each 1.00 17000.0

control panel) 1.4) On-Off Type Motorized Butterfly Valve (200MM dia-2 nos

), CI.Body with PTFE Seat and other neccessary accessories to make

system complete as per specification/drawings and as directed by Engineer

In Charge. Purpose :For Terrace Rain Water bypass system

Supplying, installing, testing and commissioning of Filter, Frontal piping,

32 valves and necessary accessories suitable for a flowrate of __ LPS at 4.5 - - -

Kg/Sq cm pressure. The material of construction shall be composite MSEP.

Multi-Grade Pressure Sand Filter (Filteration Velocity 15000 lts / hr / sq.m) Set 1.00 125000.0

Flow rate: 2.0 LPS - - -

For Activated Carbon Filter (Filteration Velocity 12000 lts / hrs / sq.m) Set 1.00 85000.0

Flow rate: 2.0 LPS - - -

BILL OF QUANTITIES OF PLUMBING

S.No Item Description Unit

QUANTITY Rate Amount

Supplying, installing, testing and commissioning of Sodium Hypochlorite

dosing system consisting of one HDPE tank of 100 litres capacity with a positive

displacement diphragm dosing pump having variable flowrate of 0-6 lph. The

33 motor shall be suitable for operation at 240 V / single phase /50 Hz. Supply. The Set 1.00 32000.0

pump shall be supplied complete with necessary polypropylene piping, valves,

strainers, low level switch and injection fittings. The pump shall be speed & stroke

control Asia LMI / equivalent make.

Supplying, installing, testing and commissioning of pH correction dosing

system consisting of one HDPE tank of 100 litres capacity with a positive

displacement diaphragm dosing pump having variable flowrate of 0-6 lph. The

34 motor shall be suitable for operation at 240 V / single phase / 50 Hz.supply. The Set 1.00 24000.0

pump shall be supplied complete with necessary polypropylene piping, valves,

strainers, low level switch and injection fittings. The pump shall be speed and stoke

control Asia LMI / equivalent.

Supplying, installing, testing and commissioning of Water Transfer Pump,

Self-primimg, Negative Suction, SS Vertical multistage centrifugal pump.

Each pump shall have TEFC2900 RPM three phase IE2 electric motor. The

35 pump shall have cast Iron head & base, SS Shaft/ Impeller/ Intermediate - - -

chamber. Pump shall be provided with mechanical seal. The pump shall be

suitable for auto/ manual operation including transportation to Site in

Factory fitted condition.

Complete (wall mounted) electrical control panel comprising of all

accessories such as Cyclic Timer, Contactors, Single Phasing Preventers,

Overload Relays, Push Buttons, Voltmeter, Ammeter, with Selector

Switches, A/M Swich, Main Incomer Switch, Dry Run Preventers with float

switches, Overflow control with Float Switches, control wiring upto tank

and any other necessary imports etc. (list to be provided by the vendor)

Accessories like Foot Valve, Priming POT, NRVs, isolating valves, SS-304

(Eachn-Magnetic) suction and delivery header, pressure gauge, MS base - - -

frame (Synthetic enamel painted over a coat of primer) has to be provided.

Flow rate :2 LPS (Set=1 working + 1 stand by) - - -

Head : 20 Mts - - -

Purpose : Filter Feed Pump Set 1.00 90000.0

Supply and installing Rain Water Percolation pits - 1500 mm in diameter up

to 3200 mm deep, bottom 500 mm filled with boulders 150 - 230 mm size,

over which one Each. UPVC 160 mm dia (4.0 kg/cm2) perforated pipe with

mm dia perforations protected by a cowl on upper end 2100 mm long,

surrounding filled with broken bricks up to 1000 mm, pebbles 40 to 50 mm

up to 400 mm, Gravel 15 to 25 mm up to 400 mm and upper most layer of

300 mm with coarse sand of 3 to 5 mm. The top 600 mm shall be left open,

with RCC grated cover on top.

Total Amount - 2187638.1

Total Amount - 2187638.1

Subhead-3 Fire Fighting Works

Sl. No Subhead Amount

Total Cost of Fire Fighting Works Excluding GST

Subhead-3 Fire Fighting Works

Sl. No Item Description

Unit Qty Amount

(a) Supplying, installation, testing and

commissioning of Electric driven Main Fire Pump

conforming to IS 12469: 2019 suitable for automatic

operation and consisting of following, complete in all

respects, as required :

(b) Horizontal type, multistage, centrifugal, split

casing pump of cast iron body & bronze impeller

with stainless steel shaft, mechanical seal as

1 (c) Suitable HP Squirrel cage induction motor,

TEFC, synchronous speed 1500 RPM, suitable for

operation on 415 volts, 3 phase 50 Hz, AC supply

with IP 55 protection for enclosure, horizontal foot

mounted type with Class-'F' insulation, conforming to

(d) M.S. fabricated Common base plate, coupling,

coupling guard, foundation bolts etc. as required.

(e)Suitable cement concrete foundation duly

plastered with anti vibration pads.

2280 lpm at 70 m Head Each 2.00 3,25,710.00

1620 lpm at 56 m Head Each 1.00 2,51,374.00

Note: *The head of the pump is selected in a

manner so as to give a minimum 3.5kgf/cm2 -

pressure at the highest/farthest point.

Subhead-3 Fire Fighting Works

Sl. No Item Description

Unit Qty Amount

(a) Supplying, installation, testing and

commissioning of diesel engine driven main fire

pump conforming to IS 12469: 2019 suitable for

automatic operation and consisting of following,

complete in all respects, as required : (Diesel Driven

(b) Horizontal type, multistage, centrifugal pump of

cast of iron body and bronze impeller with stainless

steel shaft, mechanical seal as required. (c) Suitable HP,

RPM water cooled with

radiator, diesel engine conforming to relevant IS

standard complete with auto starting mechanism,

2 /24 volts electric starting equipment, diesel tank, -

exhaust pipe extended upto 10 m outside pump

house duly insulated with 50 mm thick glass wool

with 1.0 mm thick aluminium sheet cladding,

residential silencer, instruments and protection as

per standard specification, stop solenoid for auto

stop in the event of fault with audio indications,

painted with post office red colour etc. as required.

(d) M.S fabricated, common base plate, coupling,

coupling guard, foundation bolts etc. as required.

(e) Suitable cement concrete foundation duly

plastered and with anti vibration pads.

2280 lpm at 70 m Head Each 1.00 5,38,775.00

Note: * The head of the pump is selected in a

manner so as to give a minimum 3.5kgf/cm2 -

pressure at the highest/farthest point.

Subhead-3 Fire Fighting Works

Sl. No Item Description

Unit Qty Amount

(a) Supplying, installation, testing and

commissioning of electric driven pressurisation

pump conforming to IS 12469: 2019 suitable for

automatic operation and consisting of following,

complete in all respects, as required : (Jockey

(b) Horizontal type, multistage, centrifugal pump of

cast iron body and bronze impeller with stainless

steel shaft, mechanical seal as required.

(c) Suitable HP squirell cage induction motor TEFC

type suitable for operation on 415 volts, 3 phase

50 Hz AC supply with IP 55 class of protection for

enclosure, horizontal foot mounted type with Class-

'F' insulation, conforming to IS-12615:

(d) M.S. fabricated Common base plate, coupling,

coupling guard, foundation bolts etc. as required.

(e) Suitable cement concrete foundation duly

plastered and with anti vibration pads.

180 lpm at 70 m Head Each 2.00 91,671.00

180 lpm at 56 m Head Each 1.00 73,087.00

Fabrication, supplying, Installation testing &

commissioning of Electrical control panel of cubical

construction, floor mounted type, fabricated out of

2mm thick CRCA sheet, compartmentalised with

hinged lockable doors, dust and vermin proof,

powder coated of approved shade after 7 tank

treatment process, cable alley, inter-connection with

suitable size copper conductor cable/solid copper

strip, having switchgears and accessories,

mountings and internal wiring, earth terminals,

numbering etc. complete in all respect, suitable for

250A, 50kA 4 Pole MCCB, Ics=100% Icu rating

Digital Voltmeter 0-500V with selector switch

Digital Ammeter (0-250 A) with selector swtich &

LED type RYB phase indicating lamps, ON, OFF,

trip indicating lamps

Set of Copper Bus Bar 300A

( Note : All outgoing feeders for pumps should have

digital Ammeter with selector switches, and LED

type ON, OFF, trip indicating lamps)

Subhead-3 Fire Fighting Works

Sl. No Item Description

Unit Qty Amount

125 A, 50kA TPN MCCB, Ics=100% Icu, with fully

automatic Star/Delta starter suitable for 60 HP pump

with overload protection, current sensing type single

phase preventor complete with all acceessories and

internal wiring required for automatic operation,

selector switch for local/remote, auto/manual/OFF

63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable

HP fully automatic Star/Delta starter with overload

protection, current sensing type single phase

preventor complete with all acceessories and

internal wiring required for automatic operation,

selector switch for local/remote, auto/manual/OFF

Diesel Engine Control

Control for diesel engine comprising -

Automatic/Manual selctor switch & 3 attempts

starting device, timers and relays as required, push

buttons, start/stop in manual mode

Indicating lamp for high/ Low Lub. Oil pressure, High

Water Temp and Engine on indication

Battery charger suitbale for 12V/24 V DC with boost

and trickle selector switch, 0-30 V DC volt meter,

and 0-20 A DC Ammeter

PIPES & ACCESSORIES

Providing laying, testing & commissioning of 'C'

class heavy duty MS Pipe conforming to IS

1239/Class -II of IS: 3589 i/c fittings like elbows,

tees, flanges, tapers, nuts bolts, gaskets etc. in

ground including welding, excavation & providing

cement concrete blocks as supports, anticorrosive

treatment with coaltar/asphalt tape as per IS

refilling the trench etc. of following sizes complete as

150 mm. Dia Meter 605.00 4,283.00

Subhead-3 Fire Fighting Works

Sl. No Item Description

Unit Qty Amount

Providing, laying, testing & commissioning of 'C'

class heavy duty MS pipe conforming to IS

1239/Class -II of IS: 3589 including Welding, fittings

like elbows, tees, flanges, tapers, nuts bolts, gaskets

etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two

or more coats of synthetic enamel paint of required

shade complete as required :

25 mm dia Meter 1,919.00 772.00

32 mm dia Meter 61.00 872.00

40 mm dia Meter 613.00 1,056.00

50 mm dia Meter 406.00 1,306.00

65 mm dia Meter 319.00 1,640.00

80 mm dia Meter 356.00 1,911.00

100 mm dia Meter 336.00 2,582.00

150 mm dia Meter 572.00 3,607.00

200 mm dia (wall thickness 6.3 mm) Meter 13.00 5,555.00

250 mm dia (wall thickness 6.3 mm) Meter 5.00 6,732.00

300 mm dia (wall thickness 7 mm) Meter 19.00 - -

Supplying and fixing single headed internal hydrant

valve with instantaneous Gunmetal/Stainless Steel

8 coupling of 63 mm dia with cast iron wheel ISI -

marked conforming to IS 5290 (Type -A) with blank

Gunmetal/Stainless Steel cap and chain as required

Single headed Stainless steel Each 14.00 5,565.00

Supplying and fixing Single headed external yard

hydrant valve with 1 No. 63 mm dia instantaneous

FM Gunmetal/Stainless Steel coupling and cast iron

wheel, ISI marked, conforming to IS 5290 (type A)

with blank Gunmetal/Stainless Steel cap and chain

Single headed Stainless steel Each 7.00 5,565.00

Supplying, fixing, testing and commissioning of -

butterfly valve with Tamper Switch of PN 1.6 rating with

bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of

following sizes as required :

50 mm dia Each 1.00 - -

100 mm dia Each 4.00 - -

150 mm dia Each 7.00 - -

Subhead-3 Fire Fighting Works

Sl. No Item Description

Unit Qty Amount

Supplying, fixing, testing and commissioning of GST

butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly

ISI marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of

following sizes as required :

40 mm dia Each 1.00 3,247.00

50 mm dia Each 10.00 3,452.00

65 mm dia Each 1.00 3,954.00

80 mm dia Each 16.00 4,536.00

100 mm dia Each 8.00 6,101.00

150 mm dia Each 26.00 8,170.00

200 mm dia Each 4.00 13,633.00

Providing, fixing, Testing and commissioning of Ball valve of

forged Brass body, Chrome plated Brass ball, Full bore

20mm dia Each 3.00 - -

25mm dia. Each 1.00 - -

Supplying, fixing, testing & commissioning of double

flanged sluice valve of rating PN 1.6 with non rising

11 spindle, bronze/gun metal seat, ISI marked -

complete with nuts, bolts, washers, gaskets and

conforming to IS 780 of following sizes as required :

200 mm dia Each 4.00 34,726.00

Supplying and fixing orifice plate made out of 6 mm

thick stainless steel (Grade 304) with orifice of

required size to be fitted between flange & landing

valve of external and internal hydrants to reduce

pressure at the outlet to the level of 3.5 kg/cm2

complete as required. Each

Providing, installation, testing and commissioning of

non-return valve of following sizes confirming to IS:

5312 complete with rubber gasket, GI bolts, nuts,

washers etc.as required :

65mm dia Each 1.00 5,800.00

80mm dia Each 3.00 6,926.00

100mm dia Each 1.00 9,945.00

150mm dia Each 5.00 15,845.00

200mm dia Each 1.00 25,924.00

Subhead-3 Fire Fighting Works

Sl. No Item Description

Unit Qty Amount

Providing, installation, testing and commissioning of

stainless steel Y-strainer fabricated out of 1.6 mm

thick stainless steel, Grade 304, sheet with 3 mm

dia holes with stainless steel flange.

80 mm dia Each 1.00 4,294.00

100mm dia Each 4.00 6,100.00

150mm dia Each 1.00 9,802.00

200mm dia Each 3.00 19,778.00

Supply, lnstallation, testing and Commissioning of Brass Body

Air Release Valve for risers, suitable for pressure not less than

175 PSI as per specification, inclusive of all accessories -

required for satisfactory installation as per

specification/drawings and as directed by Engineer In Charge.

25 mm dia Each 12.00 - -

Supplying and fixing 63 mm dia, 15 m long RRL

hose pipe with 63 mm dia male and female

couplings duly bound with GI wire, rivets etc.

conforming to IS 636 (type-A) as required :

Stainless Steel (Grade 304) Each 42.00 3,916.00

Supplying and fixing first-aid Hose Reel with MS

construction spray painted in post office red,

conforming to IS 884 complete with the following as

(a) 20 mm nominal internal dia water hose

thermoplastic (Textile reinforced) type -2 as per IS:

(b) 20 mm nominal internal dia gun metal globe

valve & nozzle.

(c) Drum and brackets for fixing the equipmets on

(d) Connections from riser with 25 mm dia stop gun

metal valve & M.S. Pipe and socket.

Subhead-3 Fire Fighting Works

Sl. No Item Description

Unit Qty Amount

Providing and fixing 4 mm thick glass door of size 1.5 m x

m along with anodised aluminium frame with centre opening

for fire hose cabinet. Suitably marked on the outside with the Each 14.00 - -

letters FIRE HOSE including locking arrangement. Complete

door & frame work to be in Red P.O. color over a coat of primer.

Providing & fixing lockable indoor type fire hose cabinet

frames fabricated from 40 x 40 x 5 angle iron sections and

gauge MS sheet with full front glass door and locking

arrangement, suitable to accommodate landing valves, 2 nos.

15 m long hoses, first-aid hose reel and branch pipe nozzle &

fire mans’ axe. The cabinet frame shall be painted with one

coat of primer and two or more coats of synthetic enamel paint

of approved make and shade of as required (Approx 1.5 m

(high) x 0.9 m (wide) x 0.6 m (deep) ). The item shall be

complete of MS housing with front door.

(Cost shall be inclusive of providing break glass box containing -

Supplying & fixing 63 mm dia gun metal short

branch pipe with 20 mm nominal internal diameter

17 size nozzle conforming to IS 903 suitable for -

instantaneous connection to interconnect hose pipe

coupling as required:

Stainless Steel (Grade 304) Each 21.00 2,855.00

Supplying and fixing standard Fireman's Axe with heavy duty

insulated rubber handle as per IS: 926 with clamps as per

Supplying and fixing of fire brigade connection of

cast iron body with gun metal male instantaneous

18 inlet couplings complete with cap and chain as reqd. -

for suitable dia MS pipe connection conforming to IS

904 as required:

2 way-100 mm dia M.S. Pipe Each 1.00 6,093.00

4 way - 150 mm dia M.S. Pipe Each 1.00 12,435.00

3 way - 150 mm dia M.S. Pipe Each 1.00 8,472.00

Subhead-3 Fire Fighting Works

Sl. No Item Description

Unit Qty Amount

Supplying and fixing air vessel made of 250 mm dia,

8 mm thick MS sheet, 1200 mm in height with air

release valve on top and flanged connection to riser,

19 drain arrangement with 25 mm dia gun metal wheel 16,280.00

valve with required accessories, pressure gauge

and painting with synthetic enamel paint of approved

shade as required. Each

Providing, Fixing, testing and Commissioning of UL Listed/FM

Approved 15 NB, 79 deg. K 5.6 (80), Pendant type, Quick

Response, Quartzoid bulb sprinkler, teflon tape, lock tite

solution with required accessories etc. complete as per

specification/drawings and as directed by Architect & Engineer

Pendent Sprinkler Each 12.00 - -

Providing, Fixing, testing and Commissioning of UL

Listed/FM Approved 15 NB, 68 deg. K 5.6 (80), Pendant type,

Quick Response, Quartzoid bulb sprinkler, teflon tape, lock

tite solution with required accessories etc. complete as per -

specification/drawings and as directed by Architect &

Engineer in charge.

Pendent Sprinkler Each 786.00 - -

Upright Sprinkler Each 741.00 - -

Horizontal side wall sprinkler Each 5.00 - -

Concealed sprinkler Each 10.00 - -

Providing, Fixing, testing and Commissioning of UL

Listed/FM Approved 15 NB, 68 deg. K 5.6 (80), Pendant type,

Standard Response, Quartzoid bulb sprinkler, teflon tape, -

lock tite solution with required accessories etc. complete as

per specification/drawings and as directed by Architect &

Engineer in charge.

Upright Sprinkler Each 237.00 - -

Horizontal side wall sprinkler Each 8.00 - -

Providing & fixing of adjustable rosette plate for 15mm dia UL -

Listed or FM approved complete as required. Note :

Finish/ colour shall be as per specification/drawings and as - -

directed by Architect & Engineer in charge . Each

20 Providing & fixing of pressure switch in M.S. pipe 1,401.00

line including connection etc. as required. Each

Subhead-3 Fire Fighting Works

Sl. No Item Description

Unit Qty Amount

Providing & fixing flow switch in following sizes M.S.

pipe including connection etc as required.

100mm dia Each 4.00 6,770.00

150mm dia Each 7.00 8,092.00

Providing and fixing in position industrial type pressure

22 gauges with gun metal / brass valves complete etc. as 1,251.00

Supply, lnstallation, testing and Commissioning of FM

approved Venturi Type Flow Test Meter on Test Line to

measure 150% of pump flow and suitable for mounting on 150 - -

mm dia pipe as per specification/drawings and as directed by

Engineer In Charge. Each

Providing, fixing, testing & commissioning of

installation control valve of cast iron body,

brass/bronze working parts comprising of water

motor alarm, bronze seat clapper, clapper arm and

hydraulically driven mechanical gong bell to sound

23 continuous alarm when the wet riser/sprinkler -

system activates, pressure gauges, emergency

releases, strainer, pressure switch, cock valve

complete with drain valve and bypass, test control

box, ball valves, MS pipe of required size, flanges,

orifice plate, gasket etc of follwing sizes as required:

150mm dia Each 1.00 42,629.00

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with

maximum working pressure of 175 PSI test pressure

24 of 875 PSI (Burst) with branch line (Inlet) 25mm -

NPT male thread to sprinkler head (Outlet) 15mm

NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required.

Subhead-3 Fire Fighting Works

Sl. No Item Description

Unit Qty Amount

Supplying, installation, testing & commissioning of

deluge valve (to be used for water curtains) UL

25 listed with wet pilot basic trim assembly for DVA with -

test and alarm, drip and drain valve with water motor

gong complete as required.

Providing, installation, testing & commissioning of

water curtain nozzle 15mm dia nickel chrome plated

brass, BSPT, K-factor as per design consideration

complete as required. Each

Providing, installation, testing & commissioning of

electric release trim assembly for deluge wall with

two way solelnoid valve, weather proof operation on

24 volts DC supply complete as required. Each

on, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL ListedEach

- complete as required. -

Subhead-3 Fire Fighting Works

S.No Item Description

Unit Qty Rate Amount

FIRE FIGHTING SYSTEM

Supplying, fixing, testing and commissioning of

butterfly valve with Tamper Switch of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of

following sizes as required :

50 mm dia Each 1 13,983.00

100 mm dia Each 4 29,831.00

150 mm dia Each 7 32,627.00

Providing, fixing, Testing and commissioning of Ball valve of forged Brass body, Chrome plated Brass ball, Full bore

construction, BSPT Female threaded connection.

20mm dia Each 3 1,324.00

25mm dia. Each 1 1,946.00

Supply, lnstallation, testing and Commissioning of Brass Body Air Release Valve for risers, suitable for pressure not less

3 than 175 PSI as per specification, inclusive of all accessories required for satisfactory installation as per -

specification/drawings and as directed by Engineer In Charge.

25 mm dia Each 12 3,200.00

Providing and fixing 4 mm thick glass door of size 1.5 m x 0.9 m along with anodised aluminium frame with centre

4 opening for fire hose cabinet. Suitably marked on the outside with the letters FIRE HOSE including locking arrangement. Each 14 17,250.00

Complete door & frame work to be in Red P.O. color over a coat of primer.

Providing & fixing lockable indoor type fire hose cabinet frames fabricated from 40 x 40 x 5 angle iron sections and

gauge MS sheet with full front glass door and locking arrangement, suitable to accommodate landing valves, 2 nos. 15 m

5 long hoses, first-aid hose reel and branch pipe nozzle & fire mans’ axe. The cabinet frame shall be painted with one coat Each 7 12,000.00

of primer and two or more coats of synthetic enamel paint of approved make and shade of as required (Approx 1.5 m

(high) x 0.9 m (wide) x 0.6 m (deep) ). The item shall be complete of MS housing with front door.

(Cost shall be inclusive of providing break glass box containing key for the cabinet along with hammer). -

Supplying and fixing standard Fireman's Axe with heavy duty insulated rubber handle as per IS: 926 with clamps as per

Providing, Fixing, testing and Commissioning of UL Listed/FM Approved 15 NB, 79 deg. K 5.6 (80), Pendant type, Quick

7 Response, Quartzoid bulb sprinkler, teflon tape, lock tite solution with required accessories etc. complete as per -

specification/drawings and as directed by Architect & Engineer in charge.

Pendent Sprinkler Each 12 550.00

Providing, Fixing, testing and Commissioning of UL Listed/FM Approved 15 NB, 68 deg. K 5.6 (80), Pendant type,

8 Quick Response, Quartzoid bulb sprinkler, teflon tape, lock tite solution with required accessories etc. complete as -

per specification/drawings and as directed by Architect & Engineer in charge.

Pendent Sprinkler Each 786 450.00

Upright Sprinkler Each 741 375.00

Horizontal side wall sprinkler Each 5 550.00

Concealed sprinkler Each 10 1,550.00

Providing, Fixing, testing and Commissioning of UL Listed/FM Approved 15 NB, 68 deg. K 5.6 (80), Pendant type,

9 Standard Response, Quartzoid bulb sprinkler, teflon tape, lock tite solution with required accessories etc. complete -

as per specification/drawings and as directed by Architect & Engineer in charge.

Upright Sprinkler Each 237 450.00

Horizontal side wall sprinkler Each 8 650.00

Providing & fixing of adjustable rosette plate for 15mm dia UL Listed or FM approved complete as required. Note :

Finish/ colour shall be as per specification/drawings and as directed by Architect & Engineer in charge .

Supply, lnstallation, testing and Commissioning of FM approved Venturi Type Flow Test Meter on Test Line to measure

11 150% of pump flow and suitable for mounting on 150 mm dia pipe as per specification/drawings and as directed by Each 2 1,40,800.00

Engineer In Charge.

Providing and fixing inspectors test assembly complete with inspector's test valve, sight glass, auxiliary drain valve,

union; necessary piping, threading, jointing & with corrosion resistant orifice all complete strictly as per drawing.

Supply, lnstallation, testing and Commissioning of Carbon Dioxide (CO2) type Fire Extinguisher conforming to

13 IS:15683, with ISI marked approved fitted with required accessories including wall suspension brackets as per -

specification/drawings and as directed by Architect & Engineer in charge .

Subhead-3 Fire Fighting Works

S.No Item Description

Unit Qty Rate Amount

Supply, lnstallation, testing and Commissioning of ABC Dry Chemical powder Mono-Ammonium Phosphate (MAP)-

14 90% (stored pressure) type - 6 kg Fire Extinguisher conforming to IS:15683, with ISI marked approved fitted with Each 29 2,500.00

required accessories including wall suspension brackets as per specification/drawings and as directed by Architect &

Engineer in charge .

Supply, lnstallation, testing and Commissioning of ABC Dry Chemical powder Mono-Ammonium Phosphate (MAP)-

15 90% (stored pressure) type - 9 kg Fire Extinguisher with all required accessories, conforming to IS:15683, with ISI Each 1 3,900.00

marked approved fitted with required accessories including flool mounting stand and all accessories required as per

specification/drawings and as directed by Architect & Engineer in charge .

Supply, lnstallation, testing and Commissioning of Mechanical Foam type (AFFF media) 9 Liter. cylindrical shape fire

16 extinguisher with gas cartridge, hose and all required accessories, complete as per IS:15683 - trolley mounted type for Each 2 2,200.00

portable use as per technical specifications with all the necessary accessories as required for complete installation

shall also be included as per specification/drawings and as directed by Architect & Engineer in charge .

Supply, Installation of Floor mounted bucket stand with GI buckets to hand 4 nos. of 9 ltrs buckets sand filled (as

17 per IS: 2546). The stand shall be 5'(L) x 3'(H) x 2"(W) made out of 30 x 300 x4mm MS angle frame duly coated with 2 Each 2 5,400.00

coats of red oxide primer & 2 coats of red finish paint as per specification/drawings and as directed by Engineer In

Sand Bucket with Fine Sand 10 Kgs capacity with Stand

Bucket shall be of Galvanized mild steel confirming to IS 2346-1974. In addition to galvanizing, be painted with two coats

18 of white paint on the inside and two coats of red paint on the handles and the. Ears shall be painted with two coats of Each 8 7,000.00

The word ‘FIRE’ shall be painted in black. Centrally on the outside; its letters shall be 75mm high, and approximately

Construction of valve chamber of 1500 x 750 x 1000mm Deep valve chamber with 230mm brick masonry wall on

100mm thick PCC 1:4:8 bed, finished plastered internally smooth steel trowel and externally rough with sponge trowel

complete with DI recessed top cover of 600 x 600 mm size in leaves Suitable for Fire tender Load (48 metric ton,

10kgs/sqcm point load) with necessary hinges and locking arrangement including water proofing and curing

SUBHEAD-4 HVAC WORKS

Description Unit Quantity Rate (Rs.) Amount (Rs.)

VARIABLE REFRIGERANT VOLUME SYSTEM

VRF OUTDOOR UNIT

1 Supply Installation, Testing & Commissioning of modular type

Variable Refrigerant Volume air cooled Outdoor units suitable

for cooling and heating, having all hermetically sealed inverter

type Scroll Compressor(s), microprocessor based Controller, top

discharge type condensing unit(s), with R410 A Refrigerant (Or

Eco Friendly Green Gas if any), vibration isolators, with suitable

foundation, MS Stand for Unit with necessary paint etc.

complete as required. The unit shall deliver the rated capacity at

AHRI Conditions and work even at 50°C ambient temperature Per Hp 618.0 24,214.0

without tripping. The unit shall be suitable to work on 400V +/-

10%, 3 Phase, 50Hz AC power supply. The unit shall be filled

with first charge of the refrigerant and ready for use as required.

The COP at AHRI conditions shall not be less than 3.1 and

IEER not less than 6.5. (Design should be got approval before

execution from engineer in charge)

VRF INDOOR UNITS -

2 Supply, installation, testing and commissioning of following

minimum capacity 4-way/2 way/radial flow as per approval

VRV Cassette Type Indoor ceiling mounted unit equipped with

synthetic washable media pre-filter, fan section with low noise

fan/dynamically balanced blower, multispeed motor, coil section

with DX Copper coil, electronic expansion valve, outer cabinet,

drain pump, grill, necessary supports, vibration isolation, cord

less remote control etc., suitable for operation on single phase

230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 -

cfm per TR(minimum) complete, as required. The unit shall

have automatic force shut down provision in case of fire on

receiving signal from BMS System. The cooling capacity of

indoor unit will be at air inlet conditions of 27 Degree C DB and

19 Degree C WB temperature fresh air provision compatible for

Remote Operation System

3 Supply, installation, testing and commissioning of following

minimum capacity VRV High wall type Indoor unit equipped with

washable synthetic media pre-filter, fan section with noise level

maximum 60 dB @min 400 cfm /dynamically balanced blower,

multispeed motor, coil section with DX copper coil, electronic

expansion valve, outer cabinet, cord less remote control, drain

pan, necessary accessories etc., suitable for operation on 230 V

± 10%, 50 Hz, single phase AC supply, complete as required.

The unit shall have automatic force shut down provision in case

of fire on receiving signal from BMS System. The cooling

capacity of indoor unit will be at air inlet conditions of 27 Degree

C DB and 19 Degree C WB temperature.

SUBHEAD-4 HVAC WORKS

Description Unit Quantity Rate (Rs.) Amount (Rs.)

4 Supply, installation, testing and commissioning of following

minimum capacity and external static pressure VRV ceiling

mounted ductable type Indoor unit equipped with washable

synthetic media pre-filter, fan section with low noise

fan/dynamically balanced blower, multispeed motor, coil section

with DX copper coil, electronic expansion valve, corded remote

control, outer cabinet, vibration isolators, drain pan, other

necessary supports etc., suitable for operation on single phase - -

AC supply 230 V ± 10%, 50 Hz complete as required. The unit

shall have automatic force shut down provision in case of fire on

receiving signal from BMS System. The cooling capacity of

indoor unit will be at air inlet conditions of 27 Degree C DB and

19 Degree C WB temperature.

Mid Static Ductable units (minimum 45 pascal external

static pressure)

High Static Ductable units (minimum 110 pascal external

static pressure)

AIR HANDLING UNITS - -

Supply, Installation, Testing and commissioning of factory built floor

mounted DX-type double skin type horizontal/vertical air handling

units made of 25mm thick panels consisting of pre plasticized G.I.

casing of thickness 0.8mm outside layer and 0.8 mm inside layer with

polyurethane foam (PUF) insulation factory injected between them by

injection moulding machine, complete with blower section with

blower suitable for static pressure as required, minimum 2 bend

GSS/PVC eliminators, cooling coil section with aluminium finned

copper tubes (tubes thickness not less than 0.5mm) cooling coil of

row deep, filter section with 50mm thick metal viscous/ washable

synthetic type air prefilters, belt drive package with TEFC drive motor

of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase

AC supply with suitable variable frequency drive control panel,

drain connections,

SUBHEAD-4 HVAC WORKS

Description Unit Quantity Rate (Rs.) Amount (Rs.)

stainless steel (18G) drain pan with PUF insulation, , necessary

vibration isolation arrangement etc. complete as per specification and

of following capacities.

AHU shall be connected to VRF Outdoor Units.

AHU shall have necessary provisions for VRF kit installation along

with required accessories to complete the system

SUBHEAD-4 HVAC WORKS

Description Unit Quantity Rate (Rs.) Amount (Rs.)

VRF EEV Kit - -

Include for the Supply, complete installation, Testing & Commissioning of Air

handling unit / Treated Fresh air unit Kit which will interface with the VRV/VRF

outdoor unit with the necessary instrumentation and field devices for efficient

It shall be as detailed in the specifications and on the Drawings and to the

complete satisfaction and approval of the Engineer and all concerned Statutory

Authorities and under the following sections. To be read in conjuction with the

standard installation detail drawing. Refer to the specifications for design intent

AHU-L00-01 (FOR ENTRANCE FOYER) (11000 CFM/15 TR/ 30 mm wg ESP) Nos 2.0 84,000.0

AHU-L01-01 (8000 CFM/18 TR/ 30 mm wg External Static) Nos 1.0 1,00,800.0

CSU-L01-01 (MULTIMEDIA ROOM) (2800 CFM/5.8 TR/ 30 mm wg External

CSU-L02-01 (RECORD ROOM) (2800 CFM/5.0 TR/ 30 mm wg External Static) Nos 2.0 28,000.0

AHU-L03-01 (FOR RECREATIONAL AREA-01) (9000 CFM/20 TR/ 30 mm wg ESP) Nos 1.0 1,12,000.0

AHU-L03-02 (FOR RECREATIONAL AREA-02) (6500 CFM/15 TR/ 30 mm wg ESP) Nos 1.0 1,00,800.0

CSU-L03-01 (RECEPTION) (2600 CFM/4.7 TR/ 30 mm wg External Static) Nos 1.0 28,000.0

CSU-L02-01 (WORKSTATION/BREAKOUT) (2800 CFM/5.0 TR/ 30 mm wg

External Static)

TFA-L04-01 (7000 CFM/46 TR/ 30 mm wg ESP) Nos 1.0 2,57,600.0

TFA-L04-02 (5600 CFM/37 TR/ 30 mm wg ESP) Nos 1.0 2,24,000.0

TFA-L00-01 (KITCHEN TFA) (1500 CFM/6.6 TR/ 30 mm wg ESP) Nos 1.0 56,000.0

COPPER REFRIGERANT PIPING - -

8 Supply, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal sizes

of soft/hard drawn copper refrigerant piping for VRV system,

complete with fittings, with suitable adjustable ring type hanger

supports, jointing/brazing including accessories, insulated with

XPLE Class-0 tubular insulation/with Class-0 closed cell - -

elastometric nitrile rubber tubular sleeves sections of specified

thickness as given below for Suction and Liquid lines, all

accessories as per specifications etc with necessary refrigerant

joint as required :

(A) 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Mtr.

with 19 mm thick insulation

(B) 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Mtr.

with 19 mm thick insulation

(C.) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Mtr.

with 19 mm thick insulation

(D) 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Mtr.

with 19 mm thick insulation

(E) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Mtr.

with 19 mm thick insulation

(F) 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Mtr.

with 19 mm thick insulation

SUBHEAD-4 HVAC WORKS

Description Unit Quantity Rate (Rs.) Amount (Rs.)

(G) 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Mtr.

with 19 mm thick insulation

(H) 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 Mtr.

mm with 19 mm thick insulation

(I) 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Mtr.

with 19 mm thick insulation

(J) 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Mtr.

with 19 mm thick insulation

(K) 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 Mtr.

mm with 19 mm thick insulation

(L) 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 Mtr.

mm with 19 mm thick insulation

REFRIGERANT GAS - -

9 Supplying colourless non inflammable refrigerant Gas R-410 Kg.

CONDENSATE DRAIN PIPING - -

10 Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm

thick.nitrile rubber insulation.

(A) 50 mm dia. RMT 200.0 153.0

(B) 40 mm dia. RMT 185.0 129.0

(C.) 32mm dia. RMT 70.0 104.0

(D) 25 mm dia. RMT 185.0 104.0

(E) 19 mm dia. RMT 100.0 80.0

CONTROL CABLES & WIRES - -

11 Supply installation testing commissioning Shielded Shielded

Control Cables for VRV System with necessary ISI mark

Medium class rigid PVC pipes with necessary accessories with

termination in machine and control equipments..

(A) 2C X 1.5 Sq mm Shielded Armoured Mtr. 2,492.0 142.0

(B) 3C X 1.5 Sq mm Shielded Armoured Mtr. 110.0 152.0

(C) 4C X 1.5 Sq mm Shielded Armoured Mtr. 105.0 201.0

12 Central Control System - -

(A) Cord type remote control with thermostat, LED Display and

internal wiring for Cassette, FCU & CSU

(B) Central wired Remote Control System Per HP 559.0 1,654.0

DUCTING, GRILLS, DIFFUSER AND INSULATION - -

13 Supply, installation, balancing and commissioning of factory

fabricated GSS sheet metal rectangular/round ducting complete

with neoprene rubber gaskets, elbows, splitter dampers, vanes,

hangers, supports etc. as per approved drawings and - -

specifications of following sheet thickness complete as required.

(A) Thickness 0.63 mm sheet (22 Gauge) Sq.Mtr. 2,755.0 1,296.0

(B) Thickness 0.80 mm sheet (20 Gauge) Sq.Mtr. 3,025.0 1,504.0

(C.) Thickness 1.00 mm sheet (18 Gauge) Sq.Mtr. 50.0 1,663.0

(D) Thickness 1.25 mm sheet ( 16 Gauge) Sq.Mtr. 10.0 2,162.0

14 Supply, installation, balancing and commissioning of fabricated

at site GSS sheet metal rectangular/round ducting complete

with neoprene rubber gaskets, elbows, splitter dampers, vanes,

hangers, supports etc. as per approved drawings and - -

specifications of following sheet thickness complete as required.

(A) Thickness 0.63 mm sheet (22 Gauge) Sq.Mtr. 65.0 1,245.0

SUBHEAD-4 HVAC WORKS

Description Unit Quantity Rate (Rs.) Amount (Rs.)

(B) Thickness 0.80 mm sheet (20 Gauge) Sq.Mtr. 80.0 1,453.0

(C.) Thickness 1.00 mm sheet (18 Gauge) Sq.Mtr. 10.0 1,867.0

(D) Thickness 1.25 mm sheet ( 16 Gauge) Sq.Mtr. 5.0 2,091.0

15 Kitchen Exhaust air system

Supply, fabrication and erection of factory fabricated 16G thick mild

steel Rectangular ducting with all accessories as per specifications.

(with clean outs as per NFPA at base of vertical riser and change in

direction and maximum at every 6.1 M in horizontal & every third floor of

vertical riser and at sprinkler heads)

16 Supply, installation, testing and commissioning of Fire wraping

complete in all respects, on kitchen exhaust ducts, smoke extraction

ducts with “Fire duct wrap (3M) / Fire paint (Flame bar BW11) or cladding

(Promat) to provide 1 Hr fire rating.

17 Supply, installation, testing and commissioning of GI

volume control duct damper complete with neoprene rubber

gaskets, nuts, bolts, screws linkages, flanges etc, as per SQMTR 21.5 8,298.0

specifications.

18 Supply, installation, testing and commissioning of Motorized

(ON-OFF Type) duct mounted GI volume control damper with

enthalpy sensor and necessary control wire (minimum 1.5 sq-

mm) for integration within AHU room

Damper SQMTR 5.0 9,739.0

Actuator Ea. 6.0 9,749.0

19 Supplying & fixing of powder coated extruded aluminium Supply

Air Grills with aluminium volume control dampers complete as

per specifications and size & shape as per site requirement and SQMTR 66.5 10,328.0

approved design.

20 Supplying & fixing of powder coated extruded aluminium Return

Air Grills with louvers but without volume control dampers

complete as per specifications and size & shape as per site SQMTR 80.5 7,003.0

requirement and approved design.

21 Supplying, fixing testing commissioning of supply air diffuser of

powder coated aluminium with aluminium volume control

dampers with anti smudge ring & removable core and size & SQMTR 27.0 13,553.0

shape as per site requirement and approved design.

Supplying, fixing testing commissioning of Return air diffuser of powder

coated aluminium without volume control dampers with anti smudge ring & SQMTR 13.8 9,301.0

removable core and size & shape as per site requirement and approved design

25 Supply, installation, testing & commissioning of thermal

insulated flexible duct of following sizes duly supported at

regular interval as per site requirement etc. complete - -

as required as per specifications.(A) 200 mm dia.

200mm dia RMT 20.0 696.0

26 Supply, installation, testing and commissioning of constant airflow regulator

with flexible silicon bulb as specified and suitable for

Air qty : 50CFM

SUBHEAD-4 HVAC WORKS

Description Unit Quantity Rate (Rs.) Amount (Rs.)

27 Supply, installation, testing and balancing of inlet air louvers with bird screen

for fresh air as per specifications and approved shop drawings.

Powder coated/Anodised extruded aluminium construction. SQMTR 6.5 11,000.0

28 Supply, installation, testing and balancing of outlet air louvers with bird

screen and volume damper for exhaust air as per specifications and approved - - -

Powder coated/Anodised extruded aluminium construction. SQMTR 12.1 7,200.0

30 Supply Installation testing and commissioning of CO2 sensor (in AHU return

Air duct) as per specification specification

31 Supplying, installation, testing and commissioning of duct mounted

Combined Temperature & RH sensor (Airside) on AHU/TFA/FCU outlet where

ever required and as show in drawing, schematic with necessary arrangement

as per specification

32 Supplying, Fixing, testing and commissioning of fire dampers

in supply air duct/main branch and return air path as and where

required of required sizes i/c control wiring,the damper shall be

motorized and spring return so as to close the damper in the

event of power failure automatically and open the same in case

of power being restored. The spring return action shall be - -

inbuilt mechanism and not externally mounted. The damper

shall also be closed in the event of fire signal complete

as required and as per specifications.

Fire Damper SQMTR 12.0 11,905.0

Actuator Ea 55.0 11,153.0

33 Supplying and fixing of following thickness duly

laminated aluminum foil of mat finish closed cell Nitrile rubber

(Class "O") insulation on existing duct after applying suitable

adhesive for Nitrile rubber. The joints shall be sealed with

mm wide and 3 mm thick self adhesive nitrile rubber tape - -

insulation complete as per specifications and as required.

25mm thick SQMTR 4,170.0 1,092.0

34 Supply,installation,testing and commissioning of acoustic insulation

with 15 thick open cell Class "O" Nitrile rubber insulation having thermal

conductivity less than or equal to 0.037W/m°K along with necessary

supports,nuts,bolts,gaskets, clips and in accordance with specification

15 mm thick (for TFA, AHU, SA/ R.A ducts initial 6mtr)

Supply Installation testing and commissioning of acoustic insulation

for AHU room (walls and ceiling) with 50 thick open cell Class "O" Nitrile

rubber insulation having thermal conductivity less than or equal to SQMTR 220.0 1,199.0

0.037W/m°K along with necessary supports,nuts,bolts,gaskets, clips

and in accordance with specification and drawings.

SPLIT AIR CONDITIONERS - -

SUBHEAD-4 HVAC WORKS

Description Unit Quantity Rate (Rs.) Amount (Rs.)

36 Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable

speed fan motor, inverter type hermetically sealed rotary

compressor with accessories etc. duly connected separately

erected evaporating unit and blower motor with its accessories - -

by means of extra supplied proper insulated copper tubing,drain

PVC pipes suitable for ( cost includes Eco Friendly green gas

charging and 15A plug top & Remote Control & MS Stand) with

necessary core cutting.

(2)For ISEER Range (KWH/KWH)(4.0 to 4.49) - -

(B) for 1.5 ton capacity- Premium Cat. Nos 2.0 52,558.0

38 Supplying and erecting insulated pair of soft copper tubing open

or concealed including power and control cable,necessary PVC

drain pipes for Split AC machine up to 4 TR capacity

VENTILATION - -

SUPPLY AIR AXIAL FLOW FANS (FOR PRESSURISATION) & General

Ventilation & Basement Ventilation

Supplying, installation, testing and commissioning of AMCA Certified (For Air

and Sound Performance) floor mounted supply air vane/tube axialflow fans of

following capacity with GSS casing construction and aluminium alloy impellers

with high efficiency aero‐foil sections, blades, the impeller directly driven by

TEFC induction motor should be of high efficiency class IE3 (as per IS 12615) - -

suitable for 3 Phase 50 Hz 415V ± 10 %, of class 'F' insulation, fire rated

flexible connection,hot dipped galvanised MS rings at inlet and outlet for

connecting flexible connection,anti-vibration Isolators etc. including all

accessories complete as required and as per specifications. Fan total efficiency

should not be less than 70 %, noise level should not be more than 85 dB(A) @

3 m distance when measured in hemispherical reverberant room conditions.

All the fans shall be hot dip galvanized with minimum 220 GSM Zinc Coating

and complete with bird screen at inlet. The fan shall be provided with suitable

rating TP isolator within MS enclosure complete as required confirming to

specification. Gravity louvers will be provided at the discharge of the fan so as

to avoid reverse flow.

Static pressure shall be checked/verified by contractor prior to order. Entire fan

model & AMCA Seal shall appear in technical submittal of fan. Air moving

capacity shall be as follows:

STAIRCASE PRESS FAN (23000CFM / 20MM WG ESP) Nos 2.0 1,85,169.0

LIFTWELL PRESS FAN (9000CFM / 20MM WG ESP) Nos 3.0 72,458.0

LIFT LOBBY PRESS FAN/TRANSFORMER ROOM FRESH AIR /KITCHEN FRESH

AIR (9500CFM / 20MM WG ESP)

TRANSFORMER ROOM EXHAUTS (10000CFM / 20MM WG ESP) Nos 1.0 70,339.0

PUMP ROOM ROOM EXHAUTS+FRESH AIR (8000CFM / 20MM WG ESP) Nos 2.0 56,271.0

STP EXHAUST (10000CFM / 20MM WG ESP) Nos 1.0 70,339.0

STP FRESH AIR (8000CFM / 20MM WG ESP) Nos 1.0 56,271.0

FRESH AIR FAN FOR ZONE-01 : (12000CFM / 20MM WG ESP) Nos 2.0 1,22,034.0

Toilet Extract Air Fan (800CFM / 15MM WG ESP) Nos 1.0 15,678.0

SUBHEAD-4 HVAC WORKS

Description Unit Quantity Rate (Rs.) Amount (Rs.)

Supplying, installing, testing and commissioning of Cabinet Fans with single

skin construction as per specifications, each complete with squirrel cage

induction motor (mounted internally), DIDW centrifugal fan, belt drive and

vibrations isolators.Motors shall have IE-3 efficiency rating shall be suitable for

415 +- 10% volts, 50 cycles , 3 phase AC supply. Fan static pressure shall be as

indicated . Fan-motor assembly (as whole) shall be statically & dynamically - -

balanced to grade G6.3 as per ISO-1940/AMCA 204-3. The motor shall have

IE3 class efficiency rating. Fan shall be with flexible fire proof connection at

inlet and outlet

The fan shall be suspended or floor mounted through spring isolators as per

the standard installation details and as mentioned in specifications

PANTRY EXHAUST FAN (2000 CFM/20 ESP) Nos 1.0 55,000.0

PANTRY FRESH AIR FAN (1800 CFM/20 ESP) Nos 1.0 55,000.0

TOILET EXHAUST FAN (6000 CFM/20 ESP) Nos 1.0 73,000.0

TOILET FRESH AIR FAN (1800 CFM/20 ESP) Nos 1.0 55,000.0

PANEL ROOM EXHAUST FAN (5500 CFM/20 ESP) Nos 1.0 65,000.0

PANEL ROOM FRESH AIR FAN (5000 CFM/20 ESP) Nos 1.0 65,000.0

TOILET EXHAUST FAN (600 CFM/15 ESP) Nos 2.0 45,000.0

Kitchen exhaust air fan with Scrubber unit

Supply, installation, testing and commissioning of exhaust air fan with

Scrubber Unit (MERV-8 and MERV-13 filter, Electro static precipitator &

Activated carbon filter bank units or Electro static precipitator unit only)

for the treatment of the exhaust from the kitchen as per specifications and

equipment schedule.

Fans shall be of SISW Centrifugal type with single skin construction as per

specifications, each complete with squirrel cage induction motor (mounted

internally), SISW centrifugal fan, belt drive and vibrations isolators.Motors shall

have IE-3 efficiency rating. - -

Fan shall be with flexible fire proof connection at inlet and outlet

Motors shall be suitable for 415 +- 01% volts, 50 cycles , 3 phase AC supply an

static pressure shall be as indicated.

Fan-motor assembly (as whole) shall be statically & dynamically balanced to

grade G6.3 as per ISO-1940/AMCA 204-3.

All Fan sections shall be suitable for outdoor duty and complete with flexible

fire proof connection at inlet and outlet and volume control damper .The

Scrubber shall be with all necessary supports, nuts bolts and accessories

required to complete the fixing.

KITCHEN EX FAN WITH SCRUBBER (10000CFM) Nos 1.0 4,86,000.0

44 Supplying, installation, testing and commissioning of duct mounted

OZONE GENERATION UNIT with VOC sensor and controller, carbon di-

oxide sensor and controller. Ozone monitor cum high Ozone cut out

switch complete with wiring and control wiring. The Ozone generation

system shall be provided for the following areas based on design data

provided in technical specification.

BASEMENT VENTILATION - -

SUBHEAD-4 HVAC WORKS

Description Unit Quantity Rate (Rs.) Amount (Rs.)

SMOKE EXHAUST AIR AXIAL FLOW FANS (SMOKE EVACUATION) :

Supplying, installation, testing and commissioning of AMCA Certified (For Air

and Sound Performance) ceiling hung exhaust air vane/tube axial flow fans of

following capacity with GSS casing construction and aluminium alloy impellers

with high efficiency aero‐foil sections, blades, the impeller directly driven by

TEFC induction motor should be of high efficiency class IE3 (as per IS 12615)

suitable for 3 Phase 50 Hz 415V ± 10 %, of class 'H' insulation, fire rated

flexible connection,hot dipped galvanised MS rings at inlet and outlet for

connecting flexible connection,anti-vibration Isoaltors, etc. including all

accessories complete as required and as per specifications. Motor shall be of

high temperature resistance "Class H Smoke Spill" 250° C for 2 hrs. Fan total

efficiency should not be less than 70%, noise level should not be more than

db @ 3 m distance when measured in hemispherical reverberant room

All the fans shall be hot dip galvanized with minimum 220 GSM Zinc Coating

and complete with bird screen at inlet. Suitable TP isolator within MS

enclosure should be provided complete as required confirming to

specification. Gravity louvers will be provided at the discharge of the fan so as -

to avoid reverse flow. Static pressure shall be checked/verified by contractor

prior to order. Entire fan model & AMCA Seal shall appear in technical

submittal of fan. Air moving capacity shall be as follows:

EXHAUST AIR FAN FOR ZONE-01 : (12000CFM / 20MM WG ESP) Nos 2.0 1,22,034.0

EXHAUST AIR FAN FOR ZONE-02 : (12000CFM / 20MM WG ESP) Nos 2.0 1,22,034.0

AMCA rated JET THRUST / IMPULSE FAN with 100% thrust facility in forward

and reverse direction. Complete Fan including and each components shall be

fire rated as per IEC standards and designed to with stand 300° C

temperatures for 2 hour in the event of fire. Fan motor shall be two speed

4P/6P , high efficiency and low noise design to meet NR 55.Sound levels @

1m from fan shall not exceed levels of 72/57 dba. Each fan shall be of

octogonal/circular design with impeller not more than 350 mm in dia and with

a thrust not less than 50 NM to cover an area of apprx 300 sqm. Fan casings

and outside sheet for fan housing and silencers manufactured from pre-

galvanised sheet.Fan and its standard isolator to fully meet the F300 time/

temperature classifications of EN 12101-3 (300°C for 120 minutes). Test

Certificates to be produced prior to delivery of the units. The fan shall

incorporate factory mounted silencers at the inlet and the outlet alongwith all

accessories like mounting brackets etc.,.

Silencers to be with integrated inlet cones and guide vanes to straighten air

flow. Sound attenuating material to be non-flammable in accordance with

NFPA/DIN 4102 and as per EU guide line.Steel (powder coated) Protection

guards to be provided at inlet and outlet for each fan.

Each fan to have a pre-wired terminal box with starters, contactors, relays and

autochangeover from low speed to high speed with Dahlander connection (

tapped winding). It shall be manufactured to resist high tempertures in the - -

event of emergency.Box to have easy access for service. The fan module to be

removable for easy maintenance.

Jet fans with dual speed motor Nos 12.0 92,000.0

SUBHEAD-4 HVAC WORKS

Description Unit Quantity Rate (Rs.) Amount (Rs.)

Supplying, installing, testing and commissioning of direct driven PROPELLER

FANS as shown in drawings. Each fan shall be complete with permanent split

capacitor or shaded pole motor, with wiring from fan to the small power outlet

mounting plate, accessories like wire guard, bird screen and fixed louvers for - -

weather protection as required.

The motor selected shall be energy efficient having IE3 efficiency class rating.

Air moving capacity shall be as follows:

Electrical Room Extract Air Fan (500CFM) Nos 2.0 7,627.0

Electrical Room Supply Air Fan (500CFM) Nos 2.0 7,627.0

48 Computational Fluid Dynamics CFD Analysis and simulation to ensure proper

placement of fans to comply with the air movement, ACPH, exposure

levels/time of CO to persons and applicable building regulations. CFD analysis

to include complete preparation and simulation study of 3D modellling, intake

and extract openings available for ventilation. The scope shall cover complete

basement and the contractor shall submit a complete CFD report with data Lot 1.0 75,000.0

sheets, graphs for review and approval of Client and Consultant. The Agency

scope is to work on the coordination drawings and produce the results, any

comments to be incorporated and revisions made to getthe final CFD approved

by Client / Consultant. Minimum 3 runs shall be included. CD containing visual

output shall be submitted.

Supply, installation, testing and commissioning of Carbon monoxide sensors

comprising of a carbon monoxide meter and a 0‐10 VDC transmitter an all

electronic system that utilizes a microprocessor to measure carbon monoxide

(CO), calculate various calibration factors and analogue output. The sensor

shall average samples over a time period and update the output every 2 ½

minutes. The sensor is intended to be used in enclosed basement, where it Nos 6.0 9,624.0

shall provide CO data to building automation computers or controllers. A box

shall house the sensor and provide an easy‐to‐mount, sturdy housing for the

system. Sensors shall be mounted on walls or columns about 1600 mm above

the floor. Sensors shall be evenly spaced and not put in corners, or directly in

front of air inlets. Each sensor must have a cable directly to the control panel.

50 Supply, installation, testing and commissioning of standalone intelligent

PLC control system for both CO monitoring and smoke control. The

basement shall have an individual PLC Control Panel. The PLC control

system shall control all jet, exhaust & supply air fans located in

basement. The broad logic shall be as follows:

PLC based Logic panel shall be provided to receive signals from the

Carbon Monoxide Detector panel and the Fire Control Panel which will

contain DDC (Direct Digital Controller) to give command to Jet, Supply

and Exhaust fans for their operation on the basis of the logic provided to

the PLC panel as detailed in the specification.

51 Supply, laying, testing and commissioning of 600/1000V Copper Conductor

FRLS insulated PVC Sheathed Armoured - IEC 60502, with max short circuit - -

temperature 300⁰C.

3 Core x 2.5 sqmm Copper cable armoured RMT 20.0 270.0

CONTROL PANELS FOR AHUs/FANS (OPERATED THROUGH VFD) - -

52 Design, manufacture, supply, installation, testing and commissioning of

the following cubicle type, dead front, sheet steel, wall mounted control

panels, including anchoring into the wall, incoming cable wiring - -

terminating into MCCB and copper earthing, in each panel shall be

provided by the electrical contractor.

SUBHEAD-4 HVAC WORKS

Description Unit Quantity Rate (Rs.) Amount (Rs.)

All outgoing shall be provided with Stop /Manual /Auto selector switch to

facilitate operation through BAS. All starters shall be provided with - -

potential free Contact for Connections to Building Automation System.

All internal wiring, power cabling and copper earthing of motors from

the panel to VFD & to the motor shall be included.

The panel shall include the following components & accessories. - -

MCCB as per the ratings given below, suitable for motor duty and able to

withstand fault level of 20 KA.

Terminal block for power distribution as required. - -

Contactor, over load relay with built in single phasing protection. - -

Phase indicating lights and indicating light for `ON’ status. - -

96 mm x 96 mm voltmeter and digital ammeter with selector switches. - -

Time delay relay for delayed automatic restart of motor. - -

Wiring for microswitch for stopping the fan when fire damper closes (in

case of Fan only).

For on/off/remote and local operation, 3 pole single throw switch shall

be provided in each panel to facilitate override of the automatic - -

3 Nos of Single Pole MCB's Shall be provided at the incoming section of

the starter panel for DDC Panel , fire damper actuator & as a spare.

220 / 24 V Transformer & control wiring - -

The number of control panels shall be as follows. - -

125 amps MCCB, 60 HP VFD Nos 1.0 3,81,356.0

100 amps MCCB, 35 HP VFD Nos 1.0 2,96,610.0

60 amps MCCB, 25-30 HP VFD Nos 1.0 2,11,864.0

40 amps MCCB, 15-20 HP VFD Nos 1.0 1,48,305.0

40 amps MCCB, 10/12.5 HP VFD Nos 7.0 1,27,119.0

30 amps MCCB, upto 7.5 HP VFD Nos 6.0 84,746.0

SECTION 3-10 / MINIATURE CIRCUIT BREAKERS. - -

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having - -

following capacity

(A) 6 to 32 Amp. - -

Cat.III Ea 35.0 649.0

SECTION 3-4 MOULDED CASE CIRCUIT BREAKERS - -

Note:-1 Add Rs. 10% extra for housing/Encloser of MCCB for Item No 3-4-1 to 3-

4-12 (The Enclosures should be used of same company of MCCBs to be used)

*Add 35% additional for microprocessor type of mccb in place of conventional

for item no.3-4-1 to 3-4-12

Providing and erecting Approved make Three pole moulded case circuit breaker

having breaking capacity ICU of 25 K.A. at 415 V having normal current rating

up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on - -

A.C. supply 50 c/s. with all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III Ea. 10.0 5,832.0

Providing and erecting Approved make Three pole moulded case circuit

breaker having breaking capacity/strength ICU of 35 K.A. at 415 V. having

normal current rating 125A.with Fixed thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.

ICS=100% of ICU only Cat III Ea. 1.0 7,161.0

SUBHEAD-4 HVAC WORKS

Description Unit Quantity Rate (Rs.) Amount (Rs.)

59 Providing and fixing approved make Perforated C type cable

tray. Made from pre- galvanized sheet steel. The cable tray

should be bended as per IS 2062/1079 . with max 17.5%

perforation with coupler plate / Fish plate and GI hardware like - -

nut - bolt and washers etc. erected on existing support as per

Specification and as per instruction of engineer in charge..

60 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

copper cable 1.1 KV grade to be erected as directed of following - -

(A) 2 core 2.5 Sq. mm Mtr. 2.0 125.0

(K) 4 core 4 Sq. mm Mtr. 130.0 298.0

(L) 4 core 6 Sq. mm Mtr. 1.0 451.0

(N) 4 core 16 Sq. mm Mtr 30.0 902.0

61 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) RMT 935.0 218.0

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) RMT 264.0 262.0

64 Providing and erecting Annealed bare Copper wire 4.064mm to

65 Providing and erecting HOT deep Galvanised iron strip/wire

Subhead-5: Electrical Works

Sl. No Subhead Amount

1 Electrical Works

2 Electrical Panels

Total Amount (excluding GST)

Total Amount (excluding GST)

Bill of Quantities for Electrical Works (Admin Building & External Development)

SUBHEAD 6A ELECTRICAL WORKS

SECTION - 1-2 Point wiring in Copper (MODULAR)

Sl.No Description Unit Total Quantity Rate Amount

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 kV grade FRLS

PVC insulated multi strand copper wires, in below type of pipe to be

erected complete with earth continuity and necessary connection with

1 primary light with accessories erected on Metal / PVC / wooden box

covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains

for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected with

6A Modular type switch / bell push & accessories and earth continuity of

2 following type, erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

Cat. III Pt 300.00 577.00

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected complete with

3 Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box - -

covered with appropriate front plate modules erected on / in wall / ceiling as

per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

Cat. III Pt 581.00 606.00

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

Cat. III Pt 302.00 886.00

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with

sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

Cat. III Pt 92.00 1,036.00

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame

4 covered with textured / metallic/white front plate modules erected on / in - -

wall / ceiling with following type accessories

Cat. III Pt 115.00 306.00

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

5 metallic/white front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge.

(4) TV Co-axial Socket outlet

Cat. III Pt 12.00 159.00

Bill of Quantities for Electrical Works (Admin Building & External Development)

SUBHEAD 6A ELECTRICAL WORKS

SECTION - 1-2 Point wiring in Copper (MODULAR)

Sl.No Description Unit Total Quantity Rate Amount

(23) USB Charger with output of 5 V DC,2.1 A with

inbuilt surge protection. Cat-III

Section - 1-3 Conduits & Pipes -

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

6 necessary PVC fittings & Junction boxes fixed with adhesive solution & -

Clamps with following dia of pipes, in approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc. complete of following sizes.

METAL TRUNKING SYSTEM - -

Supplying under floor pregalvanised corrosion proof rectangular sheet

steel cable trunking of 1.6 mm thick having with stand point load up to

Ton & free from seepage of concrete of screed water with all

8 accessories,Junction Box,Joints as required and demanded by engineer- - -

incharge and laying/erecting as per OEM guidelines and as per instruction

of engineer incharge having following size of dimensions and No of

compartments (W x D x T) Cat-III

[1] 50mm x 25mm x 1.6 mm with One Compartment Mtr 1.00 295.0

[2] 75mm x 25mm x 1.6 mm with One Compartment Mtr 1.00 374.0

[3] 100mm x 25mm x 1.6 mm with one compartment Mtr 55.00 454.0

[4] 225mm x 25mm x 1.6 mm with Three Compartment Mtr 1.00 965.0

[5] 250mm x 25mm x 1.6 mm with Three Compartments Mtr 55.00 1035.0

[7] 50mm x 38mm x 1.6 mm with One Compartments Mtr 25.00 374.00

[8] 75mm x 38mm x 1.6 mm with one compartments Mtr 25.00 454.00

[9] 100mm x 38mm x 1.6 mm with One Compartments Mtr 649.00 543.00

[10] 150mm x 38mm x 1.6mm with Three Compartments Mtr 25.00 758.00

[11] 225mm x 38mm x 1.6mm with Three Compartments Mtr 177.10 1,084.00

[12] 250mm x 38mm x 1.6mm with Three Compartments Mtr 25.00 1,183.00

[13] 300mm x 38mm x 1.6 mm with Three Compartments Mtr 203.50 1,329.00

Section - 1-4 Mains & Wires -

Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

9 erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper -

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size

(A) With medium class Rigid PVC pipe and accessories

providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

10 erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm Mtr. 200.00 139.00

(g) 4 wire 4 sq. mm Mtr. 6,875.00 224.00

Providing & Erecting approved make following size of TV Co-axial flexible