REROUTING OF LT CABLE TO PHASE 1 CANTEEN AT FACT-CD, AMBALAMEDU.

REROUTING OF LT CABLE TO PHASE 1 CANTEEN AT FACT-CD, AMBALAMEDU.

Supply of 650/1100 V, Aluminium conductor, 3.5C x 120 sqmm (FRLS), Flat/round Steel armoured,PVC insulated,PVC sheathed Cable conforming to IS 1554/Part I of 1988 or IS 7098 Part I, with latest amendments and with Cable length & ISI marking, to be marked on every 5 Meters on the outer Sheath of the Cable.

Supply of 415V, 3.5C x 185/220 sqmm, compound/heat shrinkable type straight through jointing kits for XLPE/PVC insulated, armoured, Aluminium counductor, power cable. (Acceptable make: Denson/3M/RAYCHEM )

Providing earthen cable trench and laying of PVC/ XLPE insulated power cables in the trench. The scope shall include manual excavation of earthen cable trench for a depth of 0.6 meter and a minimum width of 0.3 m, laying of new LTcable (2R, 3.5Cx 95/ 120 sqmm) in the trench, packing the brick above the cable and backfilling of trenches after cable laying . The scope include transprorting, shoring, strutting, dewatering if required, consolidating and disposing of surplus earth , all labour, materials, tools etc. complete as per the directions of Engineer in Charge. The scope also includes supply and installation of well burnt bricks for cable protection inside cable trenches after laying the cables as per the direction of Engineer-in-charge. Cast iron LT Cable route markers shall also be supplied and installed above the cable trench. The rates quoted shall be for the length of trench and not for the length of cables.

Laying of 1.1kV, PVC/XLPE insulated power cable (2R, 3.5C x 95/120 sqmm) in existing concrete trenches. The scope shall includes laying, dressing, fixing on cable trays /racks /risers /walls /columns /cable trenches /pipes, tagging, tying, drilling holes, minor civil work etc. The rates quoted shall be for the length of trench and not for the length of cables. All materials required for clamping and laying such as aluminium clamps/nylon ropes, bolts, nuts, washers, cable tags, etc shall be supplied by the contractor.

Laying and combined clamping of 1.1kV, PVC/XLPE insulated power cable (2R, 3.5C x 95/120 sqmm) in walls. The scope shall includes laying, dressing, fixing on cable trays /racks /risers /walls /columns /pipes, clamping (50cm spacing), tagging, tying, drilling holes, minor civil work etc. The rates quoted shall be for the length of clamping and not for the length of cables. All materials required for clamping and laying such as aluminium clamps, SS screws, GI bolts, GI nuts, GI washers, SS cable tags, etc shall be supplied by the contractor.

Retrieving of cables (2R,3.5/4C,185/220/300sq.mm) from existing earthen trench by manual excavation without damage the power cables and back filling the trench properly after completion of cable joints

Providing straight joint on 1.1KV, 3.5Cx 95/120/185/220/300 sqmm, XLPE/PVC insulated armoured aluminium power cable using compound/ heat shrinkable type straight through jointing kits. All materials required(except jointing kit) and a licensed cable jointer required shall be supplied/arranged by the contractor.

Providing termination of 1.1KV, 3.5C x95/120sqmm, XLPE/PVC insulated armoured aluminium power cable. Scope also includes disconection of existing cables from the panel, clamping, glanding, termination of new cable, minor civil work etc.. Supply of suitable crimping lugs,hardwares,insulation tape etc required for the termination.

Dismantling the 3.5/4sq.mm, 95-125sq.mm AYFY cables. The scope shall include dismantling the cable clamps, straightening, back pulling and rolling of cables without damaging the cables as directed by the site incharge.

Supply of 1 1/2", 'B' class GI pipe

Installation of 1 1/2" GI pipe. Scope shall inclue site clearing incliuding grass cutting, GI pipe cutting for a length of 1.5mtrs long and install each pieces verticaly for a depth of 0.6mtrs and a distance of not more than 2mtrs below the ground level.

Dismantling of 75/100 mm aluminium perforated tray from existing structurals

Installation of 75/100mm aluminium perforated tray on 1 1/2" GI pipe by using aluminium clamp as directed by the site incharge. Danger sign board( 30cm x 30 cm size) shall be provided at an intervell of 10mtrs on cable trays. SS bolt,nut and washer required for the job shall be supplied by the contractor.

VIJAYAN K K (BID ID -3252779)

LAMOS TECHNOLOGY SOLUTIONS PVT LTD (BID ID -3252911)

Dinu Electricals (BID ID -3252961)