REPAIR/MAINTENANCE OF BR AND EM WORKS FOR RUNWAY AIR FIELD MAINTENANCE AND CERTAIN REPAIRS WORKS IN MD OTM ACCN AT HALDWANI UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Demolition of cement concrete ( unreinforced) in ground floors and pavings incuding terrazzo topping n.exc 15cm thickness (below or above ground level) and disposal of unserviceable materials, debris and rubish to a distance not exc 50m as directed by Engr-in-Charge complete all as specified.

All as per item no. 1 here in before but of any description and in any position not other wise specifically provided for complete all as specified and directed.

Material & Labour 50mm thick (laid in two equal layer of 25 mm thick) in PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including finishing even and fair as in roof padding and prepare surface to receive treatment complete all as specified and directed.

Material & Labour for complete removal /taking/ stripping of existing APP membrane, old tar felt over roofs, parapets, chimney stacks etc as laid horizontally or vertically and removing the debries to a distance not exceeding 250 m complete all as specified.

Material and labour for applying a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @ 0.30 Kg/ sqm including cleaning surfaces etc complete all as specified

Material & Labour for APP based polymeric membrane minimum weighing 3.60Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with side lap not less 100mm and end lap not less than 150mm complete all specified.

Supply and fixing 1.4mm dia galvanised steel wire netting 20mmx20mm mesh size, made up into mattresses or cages, lapped, wired and laid in position , fixed with tinned tacks of wire stapples complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion post embedded in concrete and making good disturbed ground complete all as specified and directed.

Dismantling framed work timber scantlings under 40 sq. cm in section as in fillets, rails, posts, rafters, purlins, etc complete all as specified and directed.

Supply & fixing door closer extruded section hydraulically regulated aluminium body, designation No 3 universal type, suitable for door shutter of 851 mm to 1000mm in width and of weight between 61 to 80 Kg fixed complete all as specified and directed.

Supply & fixing mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each srewed end to be fitted with washers and one hexagonal or square nut , not exc 30cm long, diameter of neck exc 12 but n exc 20mm complete all as specified and directed.

Material & Labour Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

Dismantling asbestos cement ( corrugated, semi corrugated etc) sheet in roof covering complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, hickness including Nainital or similar pattern roof covering complete all as specified and directed

Supply & fixing rolled mild steel sections channel angle Tee section and in tubular section as in main and cross beams, hip and jack rafters; purlins,post where connected to common rafters and running rails fixed with angle cleat or other connecting plates conforming to Fe 410-W Gde-E-250, quality A complete all as specified and directed.

Supply & fixing prepainted aluminium zinc coating GI based corrugated steel sheet (galvalume base) of thickness 0.50mm having tensile strength of 550 MPA , any colour and profile as apporved by GE and to be factory moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling screws, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified (Note. work shall be carried at an height of upto 16 meter from FFL. All necessary scaffolding, safety arrangement shall be made by the contractor and quoted rate shall deemed to be included this aspect and nothing extra shall be admissible on this account.)

Supply & fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge , valley , gutter and like ridge , valley , gutter and like fixed with self tapping screws complete all as specified and directed. (Note. work shall be carried at an height of upto 16 meter from FFL. All necessary scaffolding, safety arrangement shall be made by the contractor and quoted rate shall deemed to be included this aspect and nothing extra shall be admissible on this account.)

Taking dwn and re-fixing galvalume aluminium zinc coating GI based plain/corruagated steel sheeting in any size and design old sheets any make and material, any size , gauge as in walls and roofing including provn of new screws, tapping screws any size including washers, drilling counter shank complete all as specified and directed. (Note. work shall be carried at an height of upto 16 meter from FFL. All necessary scaffolding, safety arrangement shall be made by the contractor and quoted rate shall deemed to be included this aspect and nothing extra shall be admissible on this account.)

Material and labour for providing silicon based treatment in the roof sheet to make the holes leakproof by providing silicon based adhesive including all necessary labour and material to entire satisfaction of Engr-in-Charge. Contractor shall be fully responsible to make the holes leak proof and has to give a written guaranty for two year (Note. work shall be carried at an height of upto 16 meter from FFL. All necessary scaffolding, safety arrangement shall be made by the contractor and quoted rate shall deemed to be included this aspect and nothing extra shall be admissible on this account.)

Dismantling floor, hearth , wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & labour for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over & including cement screed bed 15mm thick 1:4, complete all as specified and directed by Engineer in charge.

Material & labour for Joint free Non skid ceramic tiles 7 to 8mm thick coloured ( square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile over and including screed bed 15 mm thick in cement mortar 1:6complete all as specified and as directed.

Material & Labour Glazed ceramic coloured, printed tile of size 450x300x7mm thick fixed as in vertical surface such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10mm thick rendering/ screed bed in CM 1:4 complete all as specified and directed.

Material & labour for Vitrified ceramic tiles 10mm thick light shade ( square/rectangular) polished, area of each tile not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

Material & labour for Vitrified ceramic tiles 10mm thick light shade ( square/rectangular) polished, area of each tile not exceeding 0.36 sqm as in vertical surface such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile over and including screed bed 10 mm thick in cement mortar 1:4 complete all as specified and as directed.

Material & labour for Double charged Vitrified parking tiles 10mm thick light shade ( square/rectangular) polished, area of each tile not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

Material & Labour for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base etc and finished even and rough complete all as specified and directed.

Material & Labour for 75mm thick cement concrete 1:3:6 type C-1 (using 20mm graded stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels including necessary form work complete all as specified and directed.

Material and labour PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in coping, kerbs, lintel upto 1.5m clear span etc, rounded or chamfered on edges and like including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work complete all as specified.

Taking down chowkats or frames with shutter n.exc 1.50sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutter exc 1.50 sqm but n.exc 4.00sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down shutter of any description area exc 1.0 sqm but n exc. 2.00 sqm and refixing in the same opening including resecuring, easing & adjustment etc complete all as specified and directed.

Taking down chowkats or frames with shutter exc 1.50 sqm but n.exc 4.00sqm each (without taking off shutters from the frames) and refixing in the other opening including cutting to size and fittings etc complete all as specified and directed.

Supply & fixing 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Supply & fixing 35mm thick plain, frame 2nd class hard wood panelled shutter (any no of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

Supply & Fixing 35mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, guage etc, (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and directed.

Supply & fixing solid PVC door frame of size 50x47mm made of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing Sintex Polycon and equivalent complete all as specified and directed.

Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C" channel having a PVC sheet for strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8B.2.1 of SSR Part-II 2010. thickness of inserted panel not less than 10mm thick complete all as specified and directed.

Supply & fixing Steel windows with side hung shutters including box type hinge with steel handle, steel peg stay, and 3 Nos tower bolt 100mm complete with glazing bars, dovetailed or welded complete all as specified and directed. (Note for Srl 40, 41 & 42:- Contractor has to makr good all dismantled jambs, cills, in Cm 1:4 and finishng with two coats of oil bound distemper. Quoted rate shall be deemed to be included tsis aspect and nothing extra shall be admissible on thia account.

All as per item No. 40 herein before but without glazing bars

Supply & fixing steel ventilators with top hung shutters incl hinges steel peg stay complete all as specified and directed.

Supply & fixing in repair stainless steel Decorative tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by Engineer-in-charge) complete all as specified and directed.

Supply & fixing powder coated anodised aluminium frame for doors, window,,ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

Supply & fixing powder coated aluminium door shutters,aluminium section wt 0.55 Kg / m including necessary joining clests, glazing clips,rubber neoprene paking ,handle 2 nos in each door,hinges, anodised aluminium snap beading , screws, etc complete all as specified and directed.

Supply & fixing powder coated aluminium windows and ventilator shutters,sliding or fixed type without sash bars , aluminium section weighting o.55 kg / m including necessary joining cleats , glazing clips ,roller, rubber packing, anodised aluminium snap beading , screws,anodised aluminium fitting such as peg stays hinges,handle,locking device complete all as specified. (Note:- Glass pane and mesh will be measured and paid separately )

Supply & fixing power coated designer grill of 5.5mm dia and aperture of 75 mm fixed with stainless steel screw @ 200mm centre to centre and including aluminium powder coated flat section of size 50x1.5mm complete all as specified and directed.

Supply & fixing Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.

Supply & fixing Mortise lock , vertical type, size 100 mm Brass 4 lever complete all as specified and directed.

Supply & fixing in repair Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supplying and Fixing 250 mm size, aluminium alloy,anodized sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheets or extruded section and fixing of bolts and sliding bolts of extruded section complete all as specified.

Supply & fixing aluminium anodized barrel tower bolts of extruded section length of bolts 150mm complete all as specified and directed.

Supply & fixing butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed.

Supply & fixing aluminium handle, cast type anodized 150mm size complete all as specified and directed.

Supply and fixing 150mm overall floor stopper of aluminiumalloy body and tongue, anodised, hard drawn steel spring , fixed in floor complete all as specified and directed.

Supply & Fixing of galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply & Fixing in repair of galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Material and labour PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in hold fast, bed block etc, rounded or chamfered on edges and like including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames incl punching or drilling out glazing pins/spring clip and providing and fixing new ones complete all as specified and directed.

Supply & fixing Sheet glass 4mm thick, ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.

Supply & fixing figured glass pin 3mm thick headed type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

Taking down of existing aluminium door of any description including renewal of unserviceable parts and refixing in the same opening complete all as specified and directed.

Supply & fixing of 12 mm thick Toughned Glass Door with patch fittings with cover plate of SS316 Grade including Decorative type Stainless steel 304 grade floor Spring, fixing/moving arrangement at top, Stainless steel 2 Nos H Type Handles of 450 MM suitable size as directed, Fin Connect Patch Lock etc in each door, including cutting holes in any size in floor and wall complete all as specified and as directed . Make : All fittings shall be Ozone or equivalent make as approved.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply & fixing framed work such as grills,gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders ; framed balusters; walk ways; railing and similar work Con-forming to Fe 290 Gde E-165. complete all as specified and directed.

Material & Labour for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed.

Supply and fixing Steel water tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and fixing in repair pillar tap 15mm dia cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without letters ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified .

Supply and fixing in repair Brass chromium plated Basin mixer for mixing hot & cold water screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified .

Supply & fixing Angle cock, cast copper alloy, fancy type, screwed down, high pressure , with crutch or butterfly handles, screwed both ends for iron pipe of bore 15mm complete all as specified and directed.

Supply& Fixing tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges complete all as specified and directed.

Supply & fix Hand Shower (health faucet) CP Brass 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer) complete all as specified and as directed.. Make- Jaquar, Marc, Hindware,

Supply & fixing in repair PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Supply & fixing in repairs chromium plated bib taps , fancy type, long body, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of bore 15mm complete all as specified and directed.

Supply and fixing Stop valves,15mm fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixing in repair Brass CP mixer for mixing hot & cold water ( 3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified and directed.

Supply & Fixing Brass chromium plated shower rose 125mm size with swivel joints, including fixing to steel pipe or union complete all as specified and directed.

Material & Labour for 75mm dia PVC floor trap plain with grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 using 20mm graded crushed stone aggregate complete all as specified and directed.

Supply & fixing in repairs vitreous china wash down water closet pan (padestal pattern) white including fixing bolt, flush pipe of polyethylene of low or high density 32mm dia for low level flushing cistern, plastic water closet seat cover white with jet, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed complete all as specified and directed.

Supply & fixing PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, colour as approved , with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

Supply & Fixing vitreous china wash basin, white, flat back, size 550mm x 400mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

Material & Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone wall or concrete surface etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 15mm thick in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. complete all as specified NOTE -WPC shall be measured and paid separetely.

Supply only WPC complete all as specified and directed.

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as specified

Material & Labour for 10 mm thick rendering in CM 1:3 on concrete surfaces as on ceiling and finished even and fair complete all as specified and directed.

Material & Labour for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified.

Material and labour for preparation of old painted steel surfaces of any description, not otherwise described,over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material & Labour for preparation of new plastered or unplatered surface of wall and applying two coats of distemper oil emulsion over coat of primer complete all as specified and directed.

Material & Labour for preparation of new plastered or unplatered surface of ceiling and applying two coats of distemper oil emulsion over coat of primer complete all as specified and directed.

Material & Labour for preparation of new plastered or unplatered surface of wall and applying two coats of plastic emulsion paint over coat of primer as per manufacturers instruction complete all as specified and directed.

Material & Labour for preparation of new plastered or unplatered surface of wall and applying two coats of cement base paint over coat of primer complete all as specified and directed.

Material & Labour for preparation of old plastered or unplatered surface of wall and applying one coat of oil bound distemper to match with existing surface complete all as specified and directed.

Material & Labour for preparation of old plastered or unplatered surface of ceiling and applying one coat of oil bound distemper to match with existing surface complete all as specified and directed.

Material & Labour for preparation of new plastered or unplatered surface of wall, applying a layer of wall care putty 2mm thick average and Finishing with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Material and labour for complete removal of existing treatment by scraping down , preparation of old surface of walls, applying a layer of wall care putty 2mm thick average and Finishing with Acrylic Smooth exterior paint of required shade : old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Material & Labour for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treading oil and greasy spots and applying one coat of cement base paint wash complete all as specified and directed.

Material & Labour for complete removal of existing treatment on wall surfaces and applying two coats of cement base paint over coat of primer complete all as specified and directed.

Material & Labour for complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over coat of primer complete all as specified and directed.

Material & Labour for preparation of old plastered or unplatered surface of wall and applying one coat of exterior emulsion paint as per manufacturers instruction to match with existing surface complete all as specified and directed.

Material & Labour for preparation of old plastered or unplatered surface of wall and applying one coat of plastic emulsion paint as per manufacturers instruction to match with existing surface complete all as specified and directed.

Material & Labour for complete removal of existing treatment , applying a layer of wall care putty 2mm thick average on wall surfaces including cornics etc for proper levelling of plaste and applying two coats of plastic emulsion paint over coat of primer as per manufacturers instruction complete all as specified and directed.

Material & Labour for preparation of new/old road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100mm width using 'HOT MARK' by indigenous modern propelled road marking machine as directed including all indredients such as binder, glass beads titanium dioxide calcium carbonate inter filler, thermoplastic requirements for glass beads shall be the table No 800.4 of MOST specifications including spraying of glass beads all as per manufacturers instructions including removing of old existing paint etc complete all as specified and directed.

Material & Labour for preparation of old concrete surface plain or moulded , over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Material & Labour for Epoxy Polyurethane floor paint coating consisting of 200 micron thick priming coat and 1000 micron thick top coat including necessary preparation of the existing surface all as per the manufacturers instructions. Work to be carried out in patch work and to make the shade asper existing shade including removing existing treatment if any complete all as specified and as directed.

Material & Labour for 3mm Epoxy Polyurethane floor coating consisting of 200 micron thick priming coat 2000 microns screed coat and 1000 micron thick top coat including necessary preparation of the existing surface all as per the manufacturers instructions. Work to be carried out in patch work and to make the shade asper existing shade including removing existing treatment if any complete all as specified and as directed.

Material & Labour for 25mm thick PCC 1:2:4 type B-1 20mm graded crushed stone aggregate as in level course with finishing in cement concrete surface even and rough to receive screed bed complete all as specified and directed.

Supply & fixing PVC 8 to 9mm thick hallow PVC wall/ ceiling panelling including all fixing viz U and L as design and pattern including all necessary framed works as per manufacturer's instruction, make as approved by GE complete all as specified and directed.

E/M WORKS Supply and fixing Beacon Light lamp rotating type (Manairco Model Ab-1000F) with motor febricated box, two failsafe beacons with auromatic lamp swicthing ,power requirment spectifed and directed. Comprising of the following works:- (a) Replacment of beacon light lamp (manairco Model AB-1000F) 4 sealed beam 500W PAR 64 and beam witdh 5 degree high and rated lamp life 4000 hours:-(04Nos) (b) Repair/replacment of rotating gear motor 220V Ac, 50 Hz 36 flashes per minute, 12 rpm. (01 Nos) Note:- Testing/commissioning of lights after replacing making the lights operational should be deemed of the satisfaction of Enge-In-Charge.

Supply & Fixing point wiring for one light point/ fan/ bell (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed (Note:- wiring shall be done in colour coding as directed by Engineer in charge.

Supply and fixing switch piano flush type single pole, one way 6 Amp complete all as specified and directed.

Supply and fixing LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP-66 protection, with impact and corrosion resistant complete with driver and lamp, average life of street light not less than 50000 hours, inluding clamps, nut, bolts, bracket made of flate iron strip 25x4 mm bent to shape for LED fitting for fixing on channel/steel surface complete all as specified and directed

Supply and fixing in replacment of uniserviceab;e 100 Watt incandescent lamp with glassdoor shed screwed type suitable for H type standing indigator complete all as spectified and directed . Make : Genesis or its equivalent make as approved.

Supply and fixing in Replacment of unserviceable old halogen lamp with 200 W, 6.6 A halogen lamp suitable fo Semi directional elevated type high intensity approch light/PAPI fitting comoplete all as spectified and directed. Make: Genesis or its equivalent make as approved.

Supply and fixing in Replacement of unserviceable old halogen with 45 W 6.6 A halogen lamp suitable for elevated ommi directional elevated type high intensity approch light fitting comoplete all as spectified and directed. Make: Genesis or its equivalent make as approved.

Supply and fixing in Replacment of uniserviceable old transfomer with 200 watt ,6.6A/20A, 5000V,50 Hz series isollating transformers, suitable for individual lamp control and monitroing saystem and confirming to FAA specification as required. Complete all as specfitied and directed.

Supply and fixing in Replacment of uniserviceable old transfomer with 45 watt ,6.6A/20A, 5000V,50 Hz series isollating transformers, suitable for individual lamp control and monitroing saystem and confirming to FAA specification as required. Complete all as specfitied and directed.

Taking down 300 mm sweep exhaust fan and supply and fixing in repair propeller type AC ventilating fans 230 volts, 50 C/S heavy duty 1400 RPM, 300 mm sweep (Exhaust fan) metal body and blades protected by metal guards,Bird guard for safetry,two sleeves bearings, complete including the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor complete all as specified and directed.

Supplying, installation, testing & commissioning of 15KW/20 HP motor starter suitable for Air compressor electric motor 3 Phase, 415 Volt, IP-67 protection double metal door factory fabricated from minimum 1.6 mm thick CRCA sheet wall mounting type in surface / recess powder coated complete in all respect stater shall be original factory fabricated of approval make complete all as specified and directed.

Taking down carefully of existing 400 watt Hi-bay light fitting and supply, fixing and testing of 200 watt rugged radial LED hi-bay light for varied industrial applications hangging on top complete all as specified and directed. Make:- Havells cat pat No BAYBRITESAUCERHBP200WLED757WBTOLTG or equivalent cat pat in make wippro/ Phillips/Bajaj/C&S Note:- (i) The work to be carried at an hight of 14 to 16 meter and no extra shall be paid on this account. The rate should be deemed to be inclusive of this aspect. Contractor will be responsible for any type of accident while carried out the work by labours and all safety measures carried out during exection of work. (ii) Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

Supplying, commissioning & testing of Time light distribution board/street light timer switch with anolog time switch with battery backup, 3P module, 24 hours program, programmabel 15 min, backup of 100 hrs, current capacity 40A, with 1 changeover (1 CO) 40 Amp 3 pole, 230V Analog time switch with enclosure system in mounting arrangement and tripping mechanism alongwith suitable capacity of control MCBs. Make:-INDOASIAN Cat Part No. TL040ABO or equivalent cat part in make of L&T, C&S & Havells . Note : Contractor shall submit 2 year warranty of distribution board from manufacturer alongwith purchase voucher.

Meterial & Labour for repair of silent DG set capacity 250 KVA (Three phase diesel engine driven Generator set) comprising of the following works complete all as specified and directed :- (a) Overhauling of Self starter assy including required defective part. (b) Replacmet of engine oil filters-02 Nos. (c) Replacment of diesel filters-02 Nos. (d) Replacment of Air filter--01 No. (e) Replacment of engine Oil of required cap with spectified grade-25 litre ( Apprx). (f) Replacment of alterntor carbon bushes. (g) Fan belt as per sample-03 Nos. (h)Replacment of alternator bearing of required size-02Nos. (j) Replacment slipering assy-01No. (k) Replacment of coolant of requrid cap. (l) replacement of Battery 12V, 180Ah-02Nos (m)Replacment of proximate coolant sensor complete with wiring connection. (n)Replacment of LOP (Low oil pressure) indicator sencer-01 No. (o) Replacement of door lock - 04 Nos (p) Replacement of fuel tank cap with lock - 01 No (q) Replacement of unserviceable ARB card - 01 No

Material & Labour for taking down ceiling fans / wall mounted fans of any size / sweep after disconnecting the wire from existing ceiling rose and refixing the same after painting the same with synthetic enamel paint by spray machine including filter after cleaning dust, taking out burnt/damaged winding, bushes & cleanig of stator and rotor incl etc. Rewinding with 26/27 SWG of enamelled copper winding wire replacement of bearing /bushes, condencer 2.5/4 mfd handing and testing of fan with and including provision of 23/0.0076 copper flexible core twin core not less than 1.5 meter in length and make the fan operational with a guarantee period of one year after installing the repair fan complete all as specified and directed.

Material & Labourfor taking out burnt/damaged winding, bushes & cleaning of rotor etc of Desert cooler, Rewinding with 26/27 SWG of enameled copper winding wire replacement of bearing / bushes, handing and testing of desert cooler with and including provision of 24/0.0076 copper flexible core twin core not less than 4 meter in length, plug top two pin and make the desert cooler in operational condition, comprising of the following works :- (i) Replacement of water pump including water pipe (Complete set). (ii) Replacement of Fan bleed (PVC/Iron) as required on site. (iii) Replacement of desert cooler front grill (Fiber/Steel/Plastic as required) including switch, indicator and regulators. (iv) Checking & tightening the electrical connection (v) Replacement of wood wool (Grass Air cooler cooling pad) suitable of iron/Plastic body desert cooler (vi) Replacement of side grill (sets of 3) for holding wood wool/cooling pads.

Material & Labour in repair of true online UPS system 10 KVA, input 400 V AC range 320-480V AC frequence 50 to 47.5 Hz including replacement of burnt/defective part of the system and make the system operational condition. consisting with following works :- (a) Check operational mode of system (Normal, Battery, Bypass, Manual Bypass, ECO mode, Auto restart mode etc.). (b) Checking of electrical connection throughly . (c) Replacement of rectifier, bypass indicator, diode, capacitor, ICs, and inverter, load/unload indicator etc and other electronics component required on site. (d) Replacement in repair bettary of capacity 12V, 26 Ah - 30 Nos (d) Repairing of deffective/burnt/unserviceable part of rectifier and invertor and make the system in operational condition complete all as specifiec and directed. (e) Replacement of unserviceable motherboard. (f) Replacement of unserviceable transformer in copper wiring of suitabl size for 10KVA UPS.

Material and labour for Sub main wiring with 2 run of 6Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 6 sqmm, one run of 6sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Supply & Fixing LED luminaire 600mmx 600mm, 36 watt ( warm/milky white 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling , life of tube light not less than 50, 000 hours including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed. Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

Supply & Fixing in repair 240 V, 10 KA 'B' curve miniature circiut breaker ( MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply & Fixing in repair 240 V, 10 KA 'C' curve miniature circiut breaker ( MCB) of single poles neutral ( SPN) and current carrying capacity 32 AMP, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply & Fixing in repair 415 V, 10 KA 'B' curve miniature circiut breaker ( MCB) of TPN/FP ( SPN) and current carrying capacity 40 to 100 AMP, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing of sheet metal enclosure for DB’s (Double door type) Triple pole and neutral, 4 ways with 200 Amp rated bus bar,415 volts including blanking plates as required fixed sunk / flush to the wall or niche complete all as specified and directed.

Supply and fixing of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 Amp rated bus bar, 240 volts including blanking plates fixed sunk / flush to the wall or niche including taking down uderviceable DB with teak wood board and making good the disturbed surface to match with exiting surface complete all as specified and directed.

Supply and fixing of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 12 ways with 200 Amp rated bus bar, 240 volts including blanking plates fixed sunk / flush to the wall or niche including taking down uderviceable DB with teak wood board and making good the disturbed surface to match with exiting surface complete all as specified and directed.

Material & labour for replacement of MCCB 4 pole , 415 v, Adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed.

Material & labour for replacement of MCCB 4 pole , 415 v, Adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and directed.

Supply & Fixing for industrial plug and socket 32 Amp 3P+N+E with DIN rail, IP-67 complete with one triple pole MCB 415 V 32 Amp complete all as specified and directed.

Supply & Fixing for industrial plug and socket 63 Amp 3P+N+E with DIN rail, IP-67 complete with one triple pole MCB 415 V 63 Amp complete all as specified and directed.

Material & Labour in repairing/replacement of burnt and damage part of sliding doors of hanger consisting of following works :- (a) Repair and overhauling of elect motor 3.5 HP capacity installed for moving of gates of hanger - 03 Nos (b) Dismantling of 3.5 HP elect motor 3 phase, 440 volts from hanger door and taking away local works shop and transporting back the same after repairs to its original position complete. (c) Opening of motor winding, cutting of burnt coils and cleaning of slots and replacing the old burnt coils complete all as specified and directed. (d) Applying one coat of red oxide primer, fixing of packing with Pnumax paper and green sheet of glass cloth, rewinding with suitable gauge of super enamelled insulated wire incl condenser. (e) Varnishing with doctor bake varnish, during backtrol and heating properly. (g) Replacement of unserviceable chain, chain gear and greasing to brgs complete.

Item 143( contd ...) (l) Material & Labour in repair of starter panel box including replacement of burnt contactor, ICs, fuses, ON/OFF siwtch (NO/NC switches), Relay etc and checking of electrical connection throughly and making the door in operational condition for the entire satisfaction of GE/Engr-in-Charge.Notes :- (i) The rates for replacement/repaired should be treated to be incl in the rated quoted by comtractor incl all necessary fitting and fixtures reqd at the site of work. Nothing extra shall be provided on this account complete all as spicified and directed. (ii) Standby electric motor of 3.5 HP should be provided by contractor at the site for operation of hanger doors.

ng associate

REHMAN CONSTRUCTION COMPANY

M/S CHAUHAN ELECTRIC WORKS

Agastya Constructions