REPAIR AND MAINT OF CERTAIN STEEL AND OTHER FURNITURE AT GE IMA DEHRADUN

Amount

Repair/Relacement of following U/S parts of "Push Back Sliding Chairs/Tip Up" with suitable new parts of existing shape & size complete to match the original as shown on drg No. TP and directed by Engr-In-Charge:-

S&F suitable new PU Foam (seat ) size 440x430x90 mm & 18 density.

S&F suitable new leather cloth seat (approved type/ design/ colour) shall not be less than Rs. 250/- per RM.

S&F suitable new PU Foam (back ) size 535x440x65 mm & 18 density.

S&F suitable new leather cloth (back ) (approved type/ design/ colour) shall not be less than Rs. 250/- per RM.

S&F suitable new hand rest of existing shape & size with suitable nuts & bolts .

S&F suitable new 1.25mm thick floated aluminium beading of size 19x19x18 mm gauge with suitable nuts & bolts.

Repair of sliding mechanism with the use of new pulling springs and suitable nuts & bolts as to match with the existing tip up chairs.

Tightening of complete chair by use of suitable size screw/nails/ fastener as directed by Engr-in-Charge at site.

M&L for Two or more coat painting of synthetic enamel paint on frame of tipup chair with high class finishing including numbering of chair / welding and smoothness of surface.

Repair/replacement of following u/s parts of "Chairs steel tubular with arms / without arms" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD-75 (M) and all directed by Engr-In-Charge:-

S&F of new seat of chair tubular steel with arm of 1st class hard wood (shisham), duly canned with best quality cane alongwith black shade french polish.

S&F of new back of chair tubular steel with arm of 1st class hard wood (shisham), duly canned with best quality cane alongwith black shade french polish.

S&F of new seat of chair tubular steel without arm of 1st class hard wood (shisham), duly canned with best quality cane alongwith black shade french polish.

S&F new back of chair tubular steel without arm of 1st class hard wood (shisham), duly canned with best quality cane alongwith black shade french polish.

S&F new handle of teak wood size 452x50x25mm for chair steel tubular with arms duly polished with French polish of black shade.

S&F Rubber shoes

M&L for provide 02Nos flat iron (25x5mm) support to each chair under bottom of seat welded with frame complete all as specified and directed.

Tightening of complete chair by suitable size nails and screw as directed by Engr-in-Charge at site.

M&L for two coats of spray painting with synthetic enamel paint as required on steel/iron surface with high class finishing including necessary rubbing, denting/welding and smoothness surfaces all as directed by engr in charge.

Repair/Replacement of following u/s parts of "Table office officers steel" with suitable new parts of existing shape & size complete to match the original as per drg No. FD-1003 and directed by Engr-In-Charge:-

S&F new top of prelaminated MDF board of 18/19mm thick with 4mm thick teak wood half round beading all round of table top duly polished & finished as directed.

S&F New lock of 4lever with duplicate key of approved quality. Make: Godrej/Harrison/Link.

Relacement of u/s drawer with new drawer as shown on drg and directed by Engr-In-Charge.

S&F Rubber shoes

M&L for two or more coat spray painting of synthetic enamel paint on old painted surface with high class finish, including necessary scrapping, denting/welding and leveling with filling paste as specified & directed by Engr-In-Charge.

Repair/Replacement of following u/s parts of "Table office clerk steel" with suitable new parts of existing shape & size complete to match the original as per drg No. FD-1004 and directed by Engr-In-Charge:-

S&F new top of prelaminated MDF board of 18/19mm thick with 4mm thick teak wood half round beading all round of table top duly polished & finished as directed.

S&F New lock of 4lever with duplicate key of approved quality. Make: Godrej/Harrison/Link

Relacement of u/s drawer with new drawer of prelaminated MDF board 18/19 mm thick as shown on drg and directed by Engr-In-Charge.

S&F of Rubber shoes

M&L for two or more coat spray painting of synthetic enamel paint on old painted surface with high class finish, including necessary scrapping, denting/welding and leveling with filling paste as specified & directed by Engr-In-Charge.

Repair/Replacement of following u/s parts of "Table tublar/Allwyn steel" with suitable new parts of existing shape & size complete to match the original and directed by Engr-In-Charge:-

S&F new top of prelaminated MDF board of 18/19mm thick with 4mm thick teak wood half round beading all round of table top duly polished & finished as directed.

S&F New lock of 4lever with duplicate key of approved quality. Make: Godrej/Harrison/Link

Relacement of u/s drawer with new drawer of prelaminated MDF board 18/19mm thick as shown on drg No. FD-119 and directed by Engr-In-Charge.

S&F Rubber shoes

M&L for two or more coat spray painting of synthetic enamel paint on old painted surface with high class finish, including necessary scrapping, denting/welding and leveling with filling paste as specified & directed by Engr-In-Charge. (Make: Asian/ Berger/ Nerolac).

Repair/Relacement of following u/s parts of "Modular Workstation" with suitable new parts of existing shape & size complete to match the original as shown on drg No. TP and directed by Incharge.

S&F of 45mm (W) X 580mm (L) Powder coated "Profile Cover" shall be of die cast made up of 1-2mm thick aluminium with a waterfall edge for a continuous transition from horizontal to vertical trim.

S&F of 45mm (W) X1200mm (L) Powder coated "Profile Cover" shall be of die cast made up of 1-2mm thick aluminium with a waterfall edge for a continuous transition from horizontal to vertical trim.

S&F of 45mm (W) X 880mm (L) Powder coated " Profile Cover" shall be of die cast made up of 1-2mm thick aluminium/PVC with a waterfall edge for a continuous transition from horizontal to vertical trim.

S&F of 1200mm (L) Powder coated "Half Round Profile Cover for 45mmx45mm profile "shall be of die cast made up of 1-2mm thick aluminium/PVC with a waterfall edge for a continuous transition from horizontal to vertical trim.

S&F of 100mm (W) x 555mm (L) Powder coated "Raceway Cover" shall be of die cast made up of 1-2mm thick aluminium/PVC with a waterfall edge for a continuous transition from horizontal to vertical trim.

S&F of 100mm (W) x 855mm (L) Powder coated "Raceway Cover" shall be of die cast made up of 1-2mm thick aluminium/PVC with a waterfall edge for a continuous transition from horizontal to vertical trim.

S&F of 2 way Powder coated "Connectors Cover" shall be of 1-2mm thick aluminium/PVC die Cast for 45mm Profile Cover.

S&F of 1 way Powder coated "End Connectors Cover" shall be of 1-2mm thick Aluminium/PVC die Cast for 45mm Profile Cover.

S&F of "Keyboard tray channel base" 300mm (L) made of CRCA Sheet 1.1 mm thick zine plated.

S&F of "Keyboard Tray top" made of 25mm thick top dual side 0.8mm Laminate board size 500X350mm.

S&F of "Worktop" made of 25mm thick dual side 0.8mm Laminate board with 2mm thick PVC beading size 600X900mm& Laminate colour code – Oxford Cherry as per site.

S&F of "Side panel" made of 12mm thick dual side 0.8mm Laminate board size 600X600mm.

S&F of "Front panel" made of 12mm thick dual side 0.8mm Laminate board size 600X900mm.

S&F of "Footrest top" made of 18mm thick dual side 0.8mm Laminate board size 150X900mm.

S&F of Glass with frosted design as per site 5mm thick size of 300X560mm.

S&F of Glass with frosted design as per site 5mm thick size of 300X860mm.

S&F of Accessories –Wire Manager Cap

S&F of Accessories –Level adjuster for Panel & Worktop

Tightening of complete workstation by suitable size nails & screw as directed by Engr-in-Charge on site.

Repair/Relacement of following U/S parts of "Charpoy Hard Top" with suitable new parts of existing shape & size complete as per drg No. FD/MAP-II/01 and directed by Engr-In-Charge:-

S&F suitable new 12mm thick BWR phenol bonded commercial ply of size 1980x900mm , fitted with suitable nut & bolt.

S&F suitable new hard Rubber Shoes.

M&L for Two coats spray painting of synthetic enamel paint on charpoy hard top frame with high class finishing including necessary scrapping/ welding and smoothness of surface.

Repair/Relacement of following U/S parts of "Bed Hard Steel frame with plytop MAP" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD/E6/MAP/8(R) and directed by Engr-In-Charge:-

S&F suitable new headrest made out of 18/19mm prelaminated MDF board of exterior grade fixed with screws with 2mm thick PVC edging.

S&F suitable new footrest made out of 18/19mm prelaminated MDF board of exterior grade fixed with screws with 2mm thick PVC edging.

S&F suitable new 12mm thick BWR phenol bonded commercial ply of size 1980x900mm , fitted with suitable nut & bolt.

S&F suitable new hard Rubber Shoes.

M&L for Two or more coat painting of synthetic enamel paint on bed hard steel frame with high class finishing including necessary scrapping/ welding and smoothness of surface.

Repair/refixing of following u/s parts of "Charpoy GI Pipe" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD 220 and all directed by Engr-In-Charge:-

S&F suitable new 12mm thick BWR phenol bonded commercial ply of size 1980x900mm, fixed with flat/dome head MS galvanished iron carriage bolts. The edge of plywood shall be smoothened alround & corner shall be rounded to a radious of 1cm iron carriage, 10Nos of round headed bolts with nut & washer of size 5x75mm after drilling the holes at equal distance on rails (03Nos on each long rail & 02Nos on each short Rails)

S&F of new long rail made out of GI pipe 32 mm dia Medium grade duly threaded at both end upto 45mm. Note : u/s long rails be converted into 01 short rail & 01 leg & measured in BoQ item No. 9.03 and 9.04.

Re-fixing of short rail retrieved from item No 9.02 duly threaded at both end upto 45mm. Note: u/s short rails be converted into 01 leg and measured in Sch 9.04.

Re-fixing of legs retrieved from item No 9.02 & 9.03 duly threaded at one end upto 45mm.

S&F of new 3way GI elbow 32 mm dia ISI marked.

S&F of new check nut 32mm dia Med grade ISI marked.

S&F new flat iron MS strip of size 900mmx32mmx03mm fix with 02 Nos in each charpoy GI pipe with nut, bolt and washer in equal distance for supporting of plywood. Flat iron shall be one coat of red oxide and two coat of black synthetic enamel paint.

S&F 02Nos new clamps made out of MS flat iron 25x3mm to hold the MNF set duly plugged/sealed by welding on each leg of charpoy GI pipe duly painted with 02coats of black synthetic enamel paint over a coat of red oxide primer as specified directed.

Repair/Relacement of following U/S parts of "Charpoy folding steel" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD-388,1119 and directed by Engr-In-Charge:-

S&F suitable new 12mm thick BWR phenol bonded commercial ply of size 1800x900mm, fitted in two pieces with suitable nut & bolt.

Tightening of complete charpoy by suitable size nut & bolt as directed by Engr-in-Charge at site.

S&F suitable size new PVC shoes as approved by GE.

M&L for Two or more coat painting of synthetic enamel paint on charpoy folding steel frame with high class finishing including necessary scrapping/ welding and smoothness of surface.

Spray Painting two or more coats with synthetic enamel olive green and black paint on old painted surface to under mentioned items of steel furniture with high class finishing including necessary scrapping, denting ,welding and smoothness surfaces as shown on drg No. FD-260, FD-44,238, FD/Map-ll/06, FD-1021, FD-1022, FD-257, 1029,TP, FD-69(M), FD-69(M), FD-220,246,247, FD/E6/Map/02 (R), FD-97 (M),1023, FD-106(M) 1038, FD-81(M), TP, TP, TP, FD-90 (M), FD-1043, FD-1008, FD-1007, GE/PN/F-16 HFD-2006 and directed by engr in charge.

Chair CBA special with hand rest

Ladder for loft

Chair varandah Map

Desk stand lecture steel

Locker bed side cadet steel

Locker six door steel

Metal shelving Rack adjustable type small

Metal shelving rack adjustable type large

MNF frame all type

Rack shoe steel

Rack side steel with four tray

Rack adjustable six tiers

Stool steel size 305x305x510mm

Steel Cup board

Table Tubular steel allwyn

Table steel General Tubular

Table steel with SM Top

Trestle store room Iron

Table steel with drawer size 900x600x760mm

Table steel W/O drawer size 900x600x760mm

Waste paper basket steel

Steel Table Locker Bed Side for Cadet

Repair/Relacement of following u/s parts of "Almirah glazed steel " with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD-104(M) and directed by Engr-In-Charge:-

S&F New lock of 6 lever with duplicate key of approved quality. Make: Godrej/Harrison/Link.

S&F new shelves made out of 1.00 mm thick MS sheet fixed and welded where required.

S&F new Chromium Plated handles complete with nut and bolt as approved by GE. Make:- Godrej, Hexa, Hettich

S&F new hinges 75mm size.Make:- Godrej, Hexa, Hettich

S&F of new legs made out of 1.00 mm thick MS sheet to match the original as shown on drg and directed by Engr-In-Charge.

S&F of suitable pattern MS clamps for holding of almirah shelves.

S&F of new glasses of existing shape & size as shown on drg and directed by Engr-In-Charge.

S&F new bush (chakri) of suitable pattern for the locking system.

S&F new locking device with plunger rod of suitable pattern to the locking system of Almirah steel.

M&L for two or more coat spray painting of synthetic enamel paint as required on outer & inner side of almirah with high class finishing, including necessary rubbing, scrapping, denting, welding and leveling with filling paste as specified & directed by Engr-In-Charge.

Repair/Relacement of following u/s parts of "Book Case glass front steel" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD-90(m), FD-1028 and directed by Engr-In-Charge:-

S&F New lock of 4 lever (set of 4 lock) with duplicate key of approved quality. Make: Godrej/Harrison/Link.

S&F new CP handles complete with nut and bolt of standard size. Make:- Godrej, Hexa, Hettich

S&F new sliding shutter made out of 1.00 mm thick MS sheet fixed and welded where required.

S&F of new glasses of 4mm thick best quality ISI marked as specified & directed.

M&L for two or more coat spray painting of synthetic enamel paint as required on outer & inner side of almirah with high class finishing, including necessary rubbing, scrapping, denting, welding and leveling with filling paste as specified & directed by Engr-In-Charge.

Repair/Relacement of following u/s parts of "Almirah med steel with shelves" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD-243, FD-1032 and directed by Engr-In-Charge:-

S&F New lock of 6 lever with duplicate key of approved quality. Make: Godrej/Harrison/Link.

S&F new shelves made out of 1.00 mm thick MS sheet fixed and welded where required.

S&F new CP handles complete with nut and bolt of standard size.Make:- Godrej, Hexa, Hettich

S&F new hinges 75mm size through gas welding.Make:- Godrej, Hexa, Hettich

S&F new legs made out of 1.6mm thick MS sheet fixed and welded where required.

S&F of suitable pattern MS clamps for holding of almirah shelves.

S&F new bush (chakri) of suitable pattern for the locking system

S&F new locking device with plunger rod of suitable pattern to the locking system of Almirah steel.

M&L for two or more coat spray painting of synthetic enamel paint as required on outer & inner side of almirah with high class finishing, including necessary rubbing, scrapping, denting, welding and leveling with filling paste as specified & directed by Engr-In-Charge.

Repair/Relacement of following u/s parts of "Almirah large steel 1/2h x 1/2s" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD-1033 and directed by Engr-In-Charge:-

S&F New lock of 6 lever with duplicate key of approved quality. Make: Godrej/Harrison/Link.

S&F new shelves made out of 1.00 mm thick MS sheet fixed and welded where required.

S&F new Chromium Plated handles complete with nut and bolt of standard size.Make:- Godrej, Hexa, Hettich

S&F new hinges 75mm size.Make:- Godrej, Hexa, Hettich

S&F new legs made out of 1.6mm thick MS sheet fixed and welded where required.

S&F of suitable pattern MS clamps for holding of almirah shelves.

S&F new chromium plated 20 mm dia hanging rod of existing shape and size.

S&F new bush (chakri) of suitable pattern for the locking system.

S&F new locking device with plunger rod of suitable pattern to the locking system of Almirah steel.

M&L for two or more coat spray painting of synthetic enamel paint as required on outer & inner side of almirah with high class finishing, including necessary rubbing, scrapping, denting, welding and leveling with filling paste as specified & directed by Engr-In-Charge.

Repair/Replacement of following u/s parts of "Almirah large steel with shelves" with suitable new parts of existing shape & size complete to match the original as per drg No. FD-351, FD-1031 and directed by Engr-In Charge:-

S&F New lock of 6 lever with duplicate key of approved quality. Make: Godrej/Harrison/Link.

S&F new shelves made out of 1.00 mm thick MS sheet fixed and welded where required.

S&F new Chromium Plated handles complete with nut and bolt of standard size.Make:- Godrej, Hexa, Hettich

S&F new hinges 75mm size through gas welding.Make:- Godrej, Hexa, Hettich.

S&F new legs made out of 1.00 mm thick MS sheet fixed and welded where required.

S&F of suitable pattern MS clamps for holding of almirah shelves.

S&F new bush (chakri) of suitable pattern for the locking system.

S&F new locking device with plunger rod of suitable pattern to the locking system of Almirah steel.

M&L for two or more coat spray painting of synthetic enamel paint as required on outer & inner side of almirah with high class finishing, including necessary rubbing, scrapping, denting, welding and leveling with filling paste as specified & directed by Engr-In-Charge.

Repair/Relacement of following u/s parts of "Locker steel for ORs" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD-1029 and directed by Engr-In-Charge:-

S&F new hasp & staple of 100 mm size of mild steel.

S&F new CP handles complete with nut and bolt of standard size. Make:- Godrej, Hexa, Hettich

S&F new medium weight hinges through gas welding. Make:- Godrej, Hexa, Hettich

S&F new shelves made out of 1.00 mm thick MS sheet fixed and welded where required.

S&F new legs made out of 1.00mm thick MS sheet fixed and welded where required.

S&F new CP 20 mm dia hanging rod.

M&L for two or more coat spray painting of synthetic enamel paint as required on outer & inner side of locker steel with high class finishing, including necessary rubbing, scrapping, denting, welding and leveling with filling paste as specified & directed by Engr-In-Charge (Make: Asian/ Berger/ Nerolac).

Removing of u/s table top and S&F New top of prelaminated MDF board of 18/19 mm thick size as per drg No. TP, FD-1007, 1008, GE/PN/F-4, FD-255, FD/E6/MAP/17 with 4mm thick teak wood half round beading all round of table top including two or more coat spray painting and french polish on steel & wooden surface with high class finishing (scrapping, denting, welding and leveling) as directed by Engr-In-Charge:-

Table steel with drawer size 900x600x760mm

Table steel without drawer size 900x600x760mm

Table steel 3' x 1½' examination (covered with 1mm thick black sun mica)

Teapoy Verandah

Repair/Relacement of following U/S parts of " Form Without Back " with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD-77, FD-1027 and directed by Engr-In-Charge

S&F new top of first class hard wood teak duly polished and fixed as per drg and directed.

Tightening of complete form without back by suitable size nails & screw as directed by Engr-in-Charge on site.

M&L for two or more coats of spray painting and french polish on steel & wooden surface of form without back with high class finish, including necessary rubbing, denting and smoothness surfaces all as directed by engr in charge.

Repair/Relacement of following U/S parts of "Chair Writing MAP/Chair Visitor" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD/E6/MAP/12 and directed by Engr-In-Charge:-

S&F suitable new12 mm thick hot pressed plywood for seat.

S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for seat.

S&F suitable new tapestry cloth as approved by GE (Cloth shall not be less than Rs.300/- per RM) alongwith PVC lipping all round the seat.

S&F suitable 12 mm thick hot pressed plywood for back.

S&F suitable fabric & moulded polyurethane foam cushion 50mm thick & 32 mm density for back

S&F suitable new tapestry cloth as approved by GE (Cloth shall not be less than Rs. 300/- per RM) alongwith PVC lipping all round the back.

S&F suitable new armrest made of black integral skin polyurethane & hardness with nuts & bolts.

S&F suitable new rubber stopper.

Two or more coat painting of synthetic enamel paint on frame of chair writing/chair visitor with high class finishing including necessary scrapping / welding and smoothness of surface.

Repair/Relacement of following u/s parts of "Table dining to seat 18 persons (5850x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg No. FD No. BZ/FD/01 and directed by Engr-In-Charge. (Set of three pieces):-

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg with 4mm thick teak wood half round beading.

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Relacement of following u/s parts of "Table dining to seat 28 persons (9100x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg No. FD No. BZ/FD/01 and directed by Engr-In-Charge.(Set of four pieces):-

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18/19 mm thick size as per drg with 4mm thick teak wood half round beading.

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Relacement of following u/s parts of "Table dining to seat 32 persons(10400x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg No. FD No. BZ/FD/01 and directed by Engr-In-Charge.(Set of five pieces):-

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18/19 mm thick size as per drg with 4mm thick teak wood half round beading.

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Relacement of following u/s parts of "Table dining to seat 36 persons(11700x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg No. FD No. BZ/FD/01 and directed by Engr-In-Charge.(Set of five pieces):-

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18/19 mm thick size as per drg with 4mm thick teak wood half round beading.

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Relacement of following u/s parts of "Table dining to seat 50 persons (16250x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg No. BZ/FD/01 and directed by Engr-In-Charge.(Set of seven pieces):-

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18/19 mm thick size as per drg with 4mm thick teak wood half round beading.

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Relacement of following u/s parts of "Table dining to seat 56 persons(18200x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg No. FD No. BZ/FD/01 and directed by Engr-In-Charge. (Set of eight pieces):-

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg with 4mm thick teak wood half round beading.

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Relacement of following u/s parts of "Table dining to seat 80 persons(23637x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg No. BZ/FD/01 and directed by Engr-In-Charge. (Set of eleven pieces):-

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg with 4mm thick teak wood half round beading.

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

avtarsinghchaddha

Raghav supplier & contractor

JAI TRADERS(INDIA)