Supply of Testing Equipment to Modernization of Central Laboratory

Amount

Supply and Fixing Standard Penetration Kit (core- Cutter assembly without Generator shall be provided with NABL Approved certificate Engine 5.5Hp Capacity, Drillout Core Sample Upto 150mm Dia x 400mm Depth, Diamond Core Cutting Bit And Barrel 100mm Dia x 200mm Depth

Supply and installation & Commisioning of ARRB IV Raughmeter With DMI Cable For Using The Roughmeter & Undution Of Road To Meat Requirment As Per IRC SP 16-2019 Complete In All Respects With Sultable Computer & Printer Attachments

Universal Penetrometer for LL & BT Penetration Theunitis compact within-builttimer to control duration of penetration presetinfactory to 5seconds. Thein strumentis providedle velling screws.Ref. Standard sI S:1448 (Part60) , ASTMD937, IP179, BS: 4698, ASTMD217, IP50, ISO2137. Forempirical estimation of the consistency of lubricatingg reaseand petroleum. Made of brass with ahardened steeltip.The stem of the coneisinter changeable with all types of Penetrometersmanufactured to close to lerances, providing aunified coneandensuring that thereis no shoulder between the tip and the body. Weight : 102.5 ± 0.05g Bitumen Penetration Kit Penetration Needle Transfer Dish made of copper. Aluminium Sample Containers, Set of two.

Supply and Fixing Digital Hot Air oven with Auto Cut:- Inner Chamber Size 18"x18"x18" Ambition Temprature 300'c Least Count 10'c, Inner Chamber SS 304 Outer Chamber MS Material Powder Coated, Slave 2 No. Shall be provided with NABL Aproved Callibriation Certificate.

Supply and Fixing Desicators Set with plastic Knob 150mm Shall be provided with Callibriation Certificate

Supply and installation & Commisioning of Including Calibration OF CBR Digital Testing Apparatus With All Accessories Without Mould to Meat Requirments As Per IS-2720 Part XVI Complete In All Respects.

Supply and installation & Commisioning of Including Calibration of Oven With Digital PID Control Operator Stainless Steel Chamber With Fan Complete In All Respects Chamber Size 24"x24"x36"

Supply and Fixing Sieve Shaker electrical 18" Motorized Operation, Digital timer for auto cut after the set time, 220v,AC Power Supply, Roatating base Plate,Sieves Size 18".

Supply and Fixing Micro Controller based CTM -3000KN with touch panel disply capacity along with digital printer (Refer IS 516,IS 14858) Max Capacity 3000kn Horizontal clearance : 380mm (max), Load Accuracy: + - 1% of indicated Load, (Class-1 ) as per indian Standard (IS) 14858:2000, Load Resolution: 0.1 Kn, DIstance between platen: 400mm , PLaten size 280x280mm, Maximum vertical clearance between platens 320mm,Power supply 1 hp 3 phase 220v.Peak Load peak stress unique record no, Easy to operate shall be one year guarntee against any short circuit with full production of power fluctiom shall be provided with NABL Approved callibriation certificate

Accelerated curing Tank Cum Normal Curing Tank for 12 moulds of 150 mm size. 24-hour cycle from time of mixing. • Temper aturerange: Ambient+5°C to 65° C Curing Temperature for Concreteinlabenvir on ment for Temperaturerange-23+20 C & Relativehumidity-50+10 % The tankhasbeen designed to accommo date 150 mm/70. 6 mm casted cubesupto 12/36 cubesand fully insulated, complete with ahingedlid, heater, thermo statand recirculation pump. Provision of two removableracksallowing freecirculation of wateraroundeachcube. Thepump, drainvalves and electrical equipmentare housedina compartment located atoneend of the tank. Ref. IS: 9013-1978

(a) Beam Mould 100 mm x 100 mm x500 mm size

12 Beam Mould 150 mm x 150 mm x700 mm size

Supply and Fixing Weighing Balance 1000g (1Kg) with accuracy 1 gm shall be provided with NABL Approved callibriation certificate

Supply and Fixing Measuring cylinder -200 ml ,Glass plate ,piunger of 10 mm dia; stop watch ,base plate Glass plate size 450x450x10mm base plate ss 304 Digital stop clock cum timer 1/100second with NABL calibriation certificate

Supply and Fixing Digital Thermometer Stainless Steel NABL calibriation certifiacte

Ductility Testing Machine with digital display & cooling Designedtotest three specimenssimultaneously. Themachine consists of a carriage moving over a lead screw. Anelectric motor drivenre ductiongearuniten suressmooth constantspeed and continuousoperation. Theentire assembly ismounted with water bath complete lyencase dinmetalboundhard wood. It is equipped withan electric pump circula to randheater. Thetemperatureis controlled by digital temperature controller. Two rate soft raveli.e.5cm/ minand1cm/ minareprovided. Suitable for operation on 220V, 50Hz, Single Phase, AC supply. Ductility Mould, with Base Plate 4 Nos. Asper IS: 1208, ASTMD 113, AASHO751

Water Bath. Water Bath, Double Walled, with Digital Controller CumIndicator with stirringarrangement, inside Stainless Steel, Temp. range amb.+5°C to 80°C +/- 0.2°C

Ring and Ball Apparatus Compactuser friendly and has betteraes the tics. Ithasmag neticstirrer with heating facilityand digital display of temperature, theheating canbeadjusted throughknob. Eachunitissupplied with abath of heat resistant glass and the following : Tapered Rings 2 Nos.Ball Centring Guide 2 Nos.Steel Balls of 9.5 mm dia 2 Nos.Ring holder 1 No.Electric Heater (Hot Plate) 1 No.

Supply Unstallation & Commisioning of Flash & Fire Point Appratus (Close Cup) For Testing The Quality of Bitumen To Meat Requirments As Per 15-1209-1978 Complete In All Respects

Solubility Test apparatus of BT (Complete Set)

Supply and Fixing Weighing Scale 500gm with accuracy 0.001 g shall be provided with NABL Approved callibriation certificate

Supply and Fixing Filter paper no 5 id Method B used of IS 1216 ,Toluene/ benzene, Crucibles shall be provided with NABL Approved callibriation certificate

Supply and Fixing Trichloroethylene 500 ml Bottle shall be provided with NABL Approved callibriation certificate

Saybolt Viscometer Apparatus Ref. Standards - ASTM D88, D 244, AASHTO T 72 For theempirical measuremen tof Say bolt Viscosity of petroleum productsat specified temperaturesbet ween 70 oF and 21 0F. This is alsoused for determining the Say bolt Furolviscosityof bitumin ousmaterialsattem peratures of 250, 275, 300, 350, 400 and 450°F. It Comprisesoneeach of CylindricalOilCup, Universal Tip, Furol Tip, Bathfitted with immersionheatermounte dona stand, Dimmer statfor temperature control, Stirrer with shield. Apparatusissupplied complete within sulatedhandle and thermometer support, receiving flask, with drawaltube, filterfunnel, thermometersupport for cupand circular spiritlevel. Suitable for operation on 220V,50Hz,Single Phase.

Canon-Manning Viscosity tube (Tube size12 for obtaining absoluteviscosity) with manufacturer certificate . Ref. IS:1206 & IS: 1208

Certified reference Material for internal calibration of viscosity tube with NABL Approved callibriation certificate

Digital Room Thermometer with humidity Indicator

Supply and Fixing Weighing balance 500 gm with 0.01 gm sensitivity shall be provided with NABL Approved callibriation certificate

Pycnometer {should be as per IS: 2386 (Part 3)}

Automatic Compactor for Bituminous Mixes Of 4’’ And 6’’ DiaSamples Ref. EN 12697-10-30• Rugged construction to with stand hard work.• Fully automatic and easy to operate.• Uniform compaction.• Automatic Blow Counter.The Automatic compactore liminates the laborious process of manual compaction and allowsachievement of evendegree of compaction is achieved.The drivemechan is mliftsthe weightof 4.5 kg and drops it through a height of 457 mm.The rammer foot is removable, which facilitates preheating. Acompactionpedestal with specimen hold erisfixed to the base. Anautomatic blow counterenables thenumber of blowstobepreset be foree achtestand automatically stop sthemachine on completion.Suitable for operationon 230V, 50Hz, single phase, AC supply. Ref. Standard ASTM – D5581:1996, D 6926-04 The equipmentisused for measurement of there sistancetoplastic flow of cylindrical specimen of bituminous mixes.• Weight of rammer - 10.2 Kg• Provision for accommodating - 6” mould specimen

Digital Modified Marshall Apparatus 50kN, Singlespeed, New modelfor6” diasampleand 4”dia sample

Supply and Fixing Digital Vernier caliper 12" shall be provided with NABL Approved callibriation certificate

ENKAY ENTERPRISES

BALAJI ENTERPRISES

A.S.I.SALES PRIVATE LIMITED

EIE INSTRUMENTS PVT LTD

Hydraulic and Engineering Instruments