OR / FDR 2020 21 to Ahmedabad Dandi N H228 New NH 64 km 18/100 to 127/400 Section Aslali approach Bareja Nadiad Kankapur Road in Ahmedabad,Kheda and Anand district Annual Rate for Asphalt Work Anand

Amount

Schedule Item

Supplying & Spreading of Ready mix materials of Bituminous Macadam for patch works with 100-120 TPH batch type hot mix plant / DMP 60-90 TPH capacity / 80 - 100 TPH capacity using crushed aggregates of specified grading, premixed with bituminous binder @ 3.4 % of VG-30(60/70) grade by weight of total mix of mix and filler, transporting the hot mix to work site, laid over a previously prepared surface by mannual means to required grade, level and alignment, rolling as per MoRTH 5th revision specification to achive the desired compaction including emulsion bitumen tack coat @ 2kg/10smt etc complete- Manual patch without using paver) [For Grade-II, 19 mm Nominal Size]

Supplying & Spreading of Ready mix materials of Bituminous Macadam for patch works with 100-120 TPH batch type hot mix plant / DMP 60-90 TPH capacity / 80 - 100 TPH capacity using crushed aggregates of specified grading, premixed with bituminous binder @ 3.4 % of VG-30(60/70) grade by weight of total mix of mix and filler, transporting the hot mix to work site, laid over a previously prepared surface by paver patta to required grade, level and alignment, rolling as per MoRTH 5th revision specification to achive the desired compaction including emulsion bitumen tack coat @ 2kg/10smt etc complete- Paver patta [For Grade-II, 19 mm Nominal Size]

Close Graded Premix Surfacing/Mixed Seal Surfacing :-Providing, laying and rolling of close-graded premix surfacing material with mechanical means using HMP of appropriate capacity not less than 60 tonnes/hour. close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-a) aggregates using 5.09% VG-30(60/70) grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, transporting the hot mix to work site,laying with mechanical paver finish and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade.as per MORTH 5th revision including tack coat with emulsion at 0.20kg per sqm on existing surface average thickness 20mm etc. complete. Grade II material

Close Graded Premix Surfacing/Mixed Seal Surfacing :-Providing, laying and rolling of close-graded premix surfacing material with mechanical means using HMP of appropriate capacity not less than 60 tonnes/hour. close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-a) aggregates using 5.09% VG-30(60/70) grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, transporting the hot mix to work site,laying with maual patch work and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade.as per MORTH 5th revision including tack coat with emulsion at 0.20kg per sqm on existing surface average thickness 20mm etc. complete. Grade II material

Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type Hot Mix Plant producing an average output of 75 tonnes per hour or HMP of appropriate capacity not less than 60 tonnes/hour, using crushed aggregates of specified grading, premixed with VG-30 Grade bituminous binder @ 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.)including tack coat with emulsion at 0.2 Kg per sqm. on existing road surface with grading-II material.

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour or HMP of appropriate capacity not less than 60 tonnes/hour using crushed aggregates of specified grading, premixed with VG-30 Grade bituminous binder @ 5.4% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects) including tack coat with emulsion at 0.2 Kg per sqm on Existing surface of road. grading-II material.

Providing and applying surface painting on B.T. surface using bitumen emulsion at the rate of 5 kg / 10 sq.m. and flushing dust / sand at the rate of 0.06 cu.m. / 10 sq.m. as per MoRT&H specification.

SANKALP CONSTRUCTION

Girish J Patel