Replacement of bare conductor by A.B. Cable

Amount

Laying of A.B. Cable ( Material)

Supply of Share head type Insulated piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 sq.mm to120sq.mm95sq.mm ( Tyco/ RPG/3M. make) ( As per drawing attached )

Supply of Share head type Insulated piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 95sq.mm to 70sq.mm ( Tyco/ RPG/3M. make) ( As per drawing attached )

Sher head type insulated piercxing connector for Street Light to D.B. 16mmx1+6mm.

Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer ( Sintex make or other ISI mark reputed company ) with Panel Lock with key) ( As per drawing attached )

Supply of Dead End Clamps with I Hook. ( As per drawing attached ) & as per UPCL specification.

Supply of Suspension Clamp with I hook. ( As per drawing attached )& as per UPCL specification.

Supply of L.T. Bare Neutral connectors P.G. clamp, made of Aluminium doube bolt 95sq.mm. to 95 sq.mm for line to D.Bolt ( As per drawing attached )& as per UPCL specification.

Supply of L.T. Bare Neutral connectors P.G. clamp, made of Aluminium 95sq.mm. to 95 sq.mm double bolt( For line to line) ( As per drawing attached )& as per UPCL specification.

Supply of Aluminium Lugs ‘O’ type size 25mm.( For connecting Cable PVC 1x25)

Supply of M.S. Clamp made of M.S. flate for PCC Pole size 50x6mm. with 3 Nos. Nut & Bolts ( size 65x16mm)without cracks & burrs for Dead End Clamps assemble.painted by primers.

Supply of M.S. Clamp made of M.S. flate for PCC Pole size 50x6mm. with 2 Nos. Nut & Bolts ( size 65x16mm)without cracks & burrs for Dead End Clamps assemble.painted by primers.

Supply of M.S. half clamp made of M.S. Flat for S.P.-55Poe size 35x5mm. with 2 Nos. Nut & Bolts ( size 65x16mm)without cracks & burrsWith suitable Nut Bolt for Distribution Box duly painted by red oxide primer.

Supply of M.S. Clamp for SP-55pole made of M.S. Flat size 50x6mm. With 3nos. Nuts boltwithout cracks & burrsWith suitable Nut Bolt for suspension clamp duly painted by red oxide prmer.

Supply of M.s. Clamps for P.C.C. Pole made of M.S. flate size 50x6mm. with 3 Nos. Nut & Bolts ( size 65x16mm) for suspension clamp without cracks & burrs. Painted by primers.

Supply of M.s. Clamps made of M.S. flate size 50x6mm. with 3 Nos. Nut & Bolts ( size 65x16mm) for stay clamp without cracks & burrs. Painted by primers.

Supply of copper Flat 12"@bushing of T/F(size 50x6mm) after drilling of holes .

Supply of A,uminium lug size 400mm. For transformer.

Supply of A,uminium lug size 240mm. For transformer.

Supply of A,uminium lug size 120mm. For transformer.

Laying of A.B. Cable ( Work)

Dismantling of old ACSR Rebbit Conductor( L.T. Line) including Re- rolling back its conductor, wire, clamp, insulator etc .including stacking and transportation of material to the UPCL stores : 3 phase 5 wire.

Head load cartage of following poles road to work site(Up to 0-1KM ) P.C.C. pole.

Head load cartage of following poles road to work site(Up to 0-1KM) SP-55 Pole.

Head load cartage of following poles road to work site(Up to 0-1KM) ABC size (3x120+1x95)& other small material.

Cartage of Small material including ABC Cable & XLPE Cable & conducor including Loading / Unloading of Small material from store centre at Haldwani approximate distance 05-60 KM.

Cartage of S.P.-55Long. including Loading / Unloading from store centre at Haldwani approximate distance 05-35 KM.

Cartage of P.C.C. Pole 8.5 Mtr. Long. including Loading / Unloading from store centre at Haldwani approximate distance 05-35 KM.

Erection & grouting of P.C.C. Pole8.5 Mtr. Long ( 180 kg. W/L )for reducing span of LT, ABC line including digging of pits 0.6x0.9x2.15 Mtr.grouting stone pad and making kiciking block in E&B And with fitting of all accessories & back filling with soil & boulder earthing complete work as per RESPO specification & as per direction of Engineer in charge : Single Pole

Errection & grouting of SP-55 pole by way of digging of pit size 900x75x650mm. Complete in all respect as per direction of Engineer In charge.

Erection of stay set 16x1800mm. pit size 0.6x0.9x1.2 Mtr. as per specifications including 7/16SWG stay wire, binding, nozzling of stay with bcking filling of pit with CC 1:4:8 in bottom to pit in size 0.60.complete work stay set will be provided by UPCL.

Erection of M.S. Earthing Rod 20x2500 by way of digging of pit size 50x750x990mm deep of earth electrode in to 1000mm. below, found level fixeing and connection Connecting it with support by means of G.I. wire No7/16 SWG with Bolt & Nuts etc ( Earthing Rod & Earth wire will be provided by UPCL)

Laying & Fixing Insulated Cable 4x16 sq.mm. insulated Lead(Cable Supplied by UPCL)

Laying, Sagging of AB Cable size 3x120+1x95+1x16sqmm2 including fixing of dead & clamp, suspention clamps with I Hook in all complete work as per instruction of Engineer-In-charge .

Lopping and Choping of tree of branches in line.

Installation & Fixing of L.T.Distribution Box & Connection of L.T. consumer including all complete work.

Removal of previous connection & Re-connection of single phase L.T. consumer service connection. & shifting meter from consumer premises inside to outside premises.

Removal of previous connection & Re-connection of Three phase L.T. consumer service connection.& shifting meter from consumer premises inside to outside premises.

Installation and fixing of of copper bus bar with connection for AB cable..

Installation and fixing of alluminium lug for AB Cable at exisiting transformer.

Ibnstallation and fixing of Street Light at existing pole.

Straighting of existing tilled PCC/rail pole/S.T. Pole by digging earth.

TNK Electricals

ASHOK KUMAR AND CO