Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.7 LAccepted-Finance | ₹5.7 L | L1 | Accepted-Finance Lowest |
| 2 | L2₹5.7 L+₹3,500 (0.61%)Rejected-Finance NOT SPECIFIED | ₹5.7 L+₹3,500 (0.61%) | L2 | Rejected-Finance Other than Lowest |
| 3 | L3₹5.8 L+₹5,250 (0.92%)Rejected-Finance | ₹5.8 L+₹5,250 (0.92%) | L3 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | Chandan Parkash L1 | Devansh L3 | Jitender Kumar L2 |
|---|---|---|---|---|---|---|
| 1.00 | Submersible pumping set confirming to ISO 9906 of Kirloskar / KSB/Calama/ johnsion/ Grundfos /JSV approved make comprising to latest relevant IS Code 8034:2002 (latest edition). The pump should be fitted with bronze impeller of suitable alloys, suitable for having greased packed bearing and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP RPM 2900 of Kirloskar/NGEF/Crompton/JSV approved make conforming to BIS 9283-2013 latest with upto date amendments totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing plate to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guard errection clamps cable clip & depth gauge etc. & should be capable of handling head mentioned below with (+) 10% (-)15% Head range and suitable for operation on data given below-Total Head:- 200.00 Meters Discharge 3.89 LPS =2 Sets | 2 | Set | 2,36,000 ₹4,72,000 Lowest | 2,37,500 ₹4,75,000 | 2,37,000 ₹4,74,000 |
| 2.00 | Providing modification and fixing of existing piping available at site, fixing of required flanges, gaskets, nuts and bolts etc. complete job. | 1 | Job | 35,000 ₹35,000 Lowest | 35,500 ₹35,500 | 35,500 ₹35,500 |
| 3.00 | Providing & Fixing of uPVC hose pipe for suction/delivery type Aquaflex size 3" dia complete in all respect. | 50 | Rmt | 920 ₹46,000 Lowest | 935 ₹46,750 | 930 ₹46,500 |
| 4.00 | Installation testing and commissioning at site of work as per directions of Engineer -in - Charge. | 1 | Job | 17,000 ₹17,000 Lowest | 18,000 ₹18,000 | 17,500 ₹17,500 |
Tender Value
₹5.4 L
EMD Value
₹10,800
Closing Date
13 Jun 2026, 5:00 pmClosed
Executive Engineer
EE JSV Mandi
Providing and fixing of 15 HP Submersible Pump Set with allied accessories including modification of existing gravity main at Paddal Pump house
2026_HPIPH_135565_1
6344-6443
Open Tender
Pumps/Motors
Item Rate
90 days
Mandi
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
₹10,800
14 Jul 2026
3 Jun 2026
15 Jun 2026
3 Jun 2026
13 Jun 2026
3 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Submersible pumping set confirming to ISO 9906 of Kirloskar / KSB/Calama/ johnsion/ Grundfos /JSV approved make comprising to latest relevant IS Code 8034:2002 (latest edition). The pump should be fitted with bronze impeller of suitable alloys, suitable for having greased packed bearing and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP RPM 2900 of Kirloskar/NGEF/Crompton/JSV approved make conforming to BIS 9283-2013 latest with upto date amendments totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing plate to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guard errection clamps cable clip & depth gauge etc. & should be capable of handling head mentioned below with (+) 10% (-)15% Head range and suitable for operation on data given below-Total Head:- 200.00 Meters Discharge 3.89 LPS =2 Sets | 2 | Set | - | - |
| 2 | Providing modification and fixing of existing piping available at site, fixing of required flanges, gaskets, nuts and bolts etc. complete job. | 1 | Job | - | - |
| 3 | Providing & Fixing of uPVC hose pipe for suction/delivery type Aquaflex size 3" dia complete in all respect. | 50 | Rmt | - | - |
| 4 | Installation testing and commissioning at site of work as per directions of Engineer -in - Charge. | 1 | Job | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
BOQ_200759.xls
BOQ • 0.60 MB
Form6.pdf
Tender Documents • 0.58 MB
Form8.pdf
Tender Documents • 1.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .