Supply Installation Testing and Commissioning of 25kVA Diesel Generator Set at Headworks Gates having Output Voltage Range 380-440V, Frequency 50Hz, 1500rpm, 4-Pole, Rotating Field, Solid-State Voltage Regulator, Class - H insulation, 3-cylinder

Part A (Electrical)

Supply, Installation, Testing & Commissioning of 25kVA, Diesel Generator Set having output voltage range 380-440V, Frequency 50Hz, 1500rpm, 4-Pole, Rotating Field, Solid-State Voltage regulator, Class - H insulation, 3-cylinder (inline) CPCB IV+ Compliant along with Battery and Charger of required ratings including transportation charges (Complete Job)

SITC of Onload Change-Over switch, 4-Pole, 160 A, 415 V of reputed quality along with all necessary fittings (Complete Job)

Supply, Laying, Testing & Commissioning of 3.5 core, 35 sqmm, Armoured Aluminium Cable along with all required clamps etc (Complete Job)

Supply & Installation of 4-Pole, 100 A MCBs along with clamps & fittings

Providing & Fixing of Chemical Earthing for DG Set (Complete Job)

Part B (Civil)

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Supplying, filling, spreading and leveling stone boulders of size range 5cm to 20 cm, in recharge pit in the required thickness for all leads and lifts all complete as per direction of Engineer-in-charge.

Providing and laying in position specified grade of reinforced cement concrete, including curing but excluding the cost of centering, shuttering, finishing and reinforcement.- All works upto plinth level.1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Riveted and bolted

Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns, etc. for mass concrete.

Providing corrugated G. S. sheet roofing including vertical curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal /vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gram/m2

Carriage Cement Avg lead 5KM

Sand Avg lead 50 KM

Aggregate Avg lead 50 KM

Steel Avg Lead 35KM