J&K

Active

Works

Repair and Maintenance Works

Repairs and Maintenance of various Snow Machines by way of fabrication of cutting edges and welding jobs to various Snow Clearance Machines of SCCR Kulgam/ Bathipora of Mechanical and Hospital Sub-Division 2nd Anantnag (Hq. Pulwama).

Public Works Department

SCCR Kulgam | Pulwama, Jammu And Kashmir

Amount: ₹1.2 LCloses: 8 Oct 20265d left

Timeline

Published30 Sept 2026
Closes8 Oct 2026
Bid Opening9 Oct 2026

Tender Value

₹1.2 L

EMD Value

₹2,310

Closing Date

8 Oct 2026, 2:00 pm5d left

Tender Inviting Organisation

Name

Executive Engineer

Address

Office of the Executive Engineer Mechanical and Hospital Division Anantnag

Work Description

Repairs and Maintenance of various Snow Machines by way of fabrication of cutting edges and welding jobs to various Snow Clearance Machines of SCCR Kulgam/ Bathipora of Mechanical and Hospital Sub-Division 2nd Anantnag (Hq. Pulwama).

Tender Information

Tender ID

2026_PWDJK_326664_1

Reference Number

MHDA/TS/2026-27/63

Tender Type

Open Tender

Product Category

Repair and Maintenance Works

Form of Contract

Percentage

Period of Work

10 days

Location

SCCR Kulgam

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Refer NIT

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredScanned copy of Tender Document Cost as per NIT (.pdf)

RequiredScanned copy of Earnest Money Deposit as per NIT (.pdf)

RequiredScanned copy of GST registration, latest form GSTR-3B and PAN Card as per NIT (.pdf)

RequiredScanned copy of Accepted/Confirmed of Annexures of NIT (.pdf)

RequiredScanned copy of contractors registration card on JKPWDOMS as per NIT (.pdf)

RequiredScanned copy of proof of having executed mechanical nature of works as per NIT (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹200

Tender Fee Payable To

Executive Engineer M and H Division Anantnag

EMD Fee Amount

₹2,310

Important Dates

Last Activity

30 Sept 2026

Published

30 Sept 2026

Bid Opening

9 Oct 2026

Download Starts

30 Sept 2026

Download Ends

8 Oct 2026

Submission Starts

30 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (16 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Cutting Edges for Guru 1st, 2nd, 3rd and LRV(New) (One Set for each Machine)
1.01	Fabrication of new cutting edges for Snow Service Blade Assembly out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of four pieces of the existing fitted cutting edges of the blade and drilling of 24 holes of size 16-18 mm at required locations. The job also includes supply of new set of M14 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by firm.	4	Job	4,750	₹19,000
2Cutting Edges for MC 72
2.01	Fabrication of new cutting edges for Ozamet/Bell Heck Blade Assembly out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of four pieces of the existing fitted cutting edges of the blade and drilling of 18 holes of size 18-20 mm at required locations. The job also includes supply of new set of M16 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by firm.	1	Job	4,000	₹4,000
3Cutting Edges forUnimog-423
3.01	Fabrication of new cutting edges for Giletta/Bucher Blade Assembly out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of four pieces of the existing fitted cutting edges of the blade and drilling of 20 holes of size 18-20mm at required locations. The job also includes supply of new set of all M16 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by firm.	1	Job	4,300	₹4,300
4Cutting Edges for Snow cat- 18th, 5th, 6th, 7th, 8th and Snow cat- 9th (OneSet for each Machine)
4.01	Fabrication of new cutting edges out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of two pieces of the existing fitted cutting edges of the blade and drilling of holes(16 in total) of 18-20mm size at required locations. The job also includes supply of new set of M16 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by the firm.	6	Job	3,500	₹21,000
5	Variable blade of Tata-715 (MC-73): Repairing of damaged/bent front two among 4 piece cutting edge base plate supports, including straightening/alignment of bent support, removal of damaged material, welding/build-up of worn and enlarged bolt holes, redrilling/machining of holes to original specified dia. For proper bolt fitment, and necessary welding, griding and finishing complete.	1	Job	3,000	₹3,000
6	Repairs to Fuel Tank of Snow Cat 8th: Repairing of damaged fuel tank by way of dent removal and straightening, repair of cracks/holes and damaged joints by welding, sealing of leaking points, repair/reinforcement of mounting supports and straps wherever required, grinding and finishing complete.	1	Job	2,500	₹2,500

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.75 MB

Work Item Documents

BOQ_1105046.xls

BOQ • 0.41 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Cutting Edges for Guru 1st, 2nd, 3rd and LRV(New) (One Set for each Machine)
1.01	Fabrication of new cutting edges for Snow Service Blade Assembly out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of four pieces of the existing fitted cutting edges of the blade and drilling of 24 holes of size 16-18 mm at required locations. The job also includes supply of new set of M14 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by firm.	4	Job	4,750	₹19,000
2Cutting Edges for MC 72
2.01	Fabrication of new cutting edges for Ozamet/Bell Heck Blade Assembly out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of four pieces of the existing fitted cutting edges of the blade and drilling of 18 holes of size 18-20 mm at required locations. The job also includes supply of new set of M16 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by firm.	1	Job	4,000	₹4,000
3Cutting Edges forUnimog-423
3.01	Fabrication of new cutting edges for Giletta/Bucher Blade Assembly out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of four pieces of the existing fitted cutting edges of the blade and drilling of 20 holes of size 18-20mm at required locations. The job also includes supply of new set of all M16 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by firm.	1	Job	4,300	₹4,300
4Cutting Edges for Snow cat- 18th, 5th, 6th, 7th, 8th and Snow cat- 9th (OneSet for each Machine)
4.01	Fabrication of new cutting edges out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of two pieces of the existing fitted cutting edges of the blade and drilling of holes(16 in total) of 18-20mm size at required locations. The job also includes supply of new set of M16 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by the firm.	6	Job	3,500	₹21,000
5	Variable blade of Tata-715 (MC-73): Repairing of damaged/bent front two among 4 piece cutting edge base plate supports, including straightening/alignment of bent support, removal of damaged material, welding/build-up of worn and enlarged bolt holes, redrilling/machining of holes to original specified dia. For proper bolt fitment, and necessary welding, griding and finishing complete.	1	Job	3,000	₹3,000
6	Repairs to Fuel Tank of Snow Cat 8th: Repairing of damaged fuel tank by way of dent removal and straightening, repair of cracks/holes and damaged joints by welding, sealing of leaking points, repair/reinforcement of mounting supports and straps wherever required, grinding and finishing complete.	1	Job	2,500	₹2,500

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Cutting Edges for Guru 1st, 2nd, 3rd and LRV(New) (One Set for each Machine)

1.01

Fabrication of new cutting edges for Snow Service Blade Assembly out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of four pieces of the existing fitted cutting edges of the blade and drilling of 24 holes of size 16-18 mm at required locations. The job also includes supply of new set of M14 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by firm.

Job

4,750

₹19,000

2Cutting Edges for MC 72

2.01

Fabrication of new cutting edges for Ozamet/Bell Heck Blade Assembly out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of four pieces of the existing fitted cutting edges of the blade and drilling of 18 holes of size 18-20 mm at required locations. The job also includes supply of new set of M16 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by firm.

Job

4,000

₹4,000

3Cutting Edges forUnimog-423

3.01

Fabrication of new cutting edges for Giletta/Bucher Blade Assembly out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of four pieces of the existing fitted cutting edges of the blade and drilling of 20 holes of size 18-20mm at required locations. The job also includes supply of new set of all M16 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by firm.

Job

4,300

₹4,300

4Cutting Edges for Snow cat- 18th, 5th, 6th, 7th, 8th and Snow cat- 9th (OneSet for each Machine)

4.01

Fabrication of new cutting edges out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of two pieces of the existing fitted cutting edges of the blade and drilling of holes(16 in total) of 18-20mm size at required locations. The job also includes supply of new set of M16 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by the firm.

Job

3,500

₹21,000

Variable blade of Tata-715 (MC-73): Repairing of damaged/bent front two among 4 piece cutting edge base plate supports, including straightening/alignment of bent support, removal of damaged material, welding/build-up of worn and enlarged bolt holes, redrilling/machining of holes to original specified dia. For proper bolt fitment, and necessary welding, griding and finishing complete.

Job

3,000

₹3,000

Repairs to Fuel Tank of Snow Cat 8th: Repairing of damaged fuel tank by way of dent removal and straightening, repair of cracks/holes and damaged joints by welding, sealing of leaking points, repair/reinforcement of mounting supports and straps wherever required, grinding and finishing complete.

Job

2,500

₹2,500