Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.3 LAccepted-AOC | L1 | Accepted-AOC Acceptance of contract | |
| 2 | L2₹20.8 L+₹2.3 L (12.6%)Rejected-AOC 60 B C BAZAR AMBALA CANTT HARYANA 133001 | AMBALA | HARYANA | 133001 | L2 | Rejected-AOC R | |
| 3 | L3₹24.3 L+₹5.8 L (31.5%)Rejected-AOC | L3 | Rejected-AOC R |
Tender Value
Refer Docs
EMD Value
₹35.5 L
Closing Date
20 May 2021, 3:00 pmClosed
GE IMA DEHRADUN
GE IMA DEHRADUN
MAINT REPAIR TO CERTAIN WOODEN FURNITURE
2021_MES_437524_1
GE/IMA/43/2021-22 9087/E8
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE IMA DEHRADUN
Refer NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA DEHRADUN
₹35.5 L
Yes
10 Jun 2021
21 Apr 2021
22 May 2021
22 Apr 2021
20 May 2021
6 May 2021
Amount
Replacement of following old broken unserviceable parts with new parts of chair dining long back shape and size as per drawings and as directed by Engineer-in-charge (Drg No FD-357)
Front legs made of 1st class teak wood all as specified and directed
Rear legs made of 1st class teak wood all as specified and directed
Plywood of size 450x400x6mm commercial ply wood grade BWR type BB complete all as directed.
Leatheritte rexine brown colour with new rexine of best quality matching colour for seat as per drg and as directed by Engineer-in-Charge.
Foam 32 density 2" thick fixing with seat of size 450x400 mm as per drg and as directed by Engineer-in- Charge.
Plywood back size 600x300x6mm commercial of chair dining long back as per drawing and as directed by Engineer-in-Charge
Leatheritte rexine brown colour with new rexine of best quality matching colour for back as per drg and as approved by GE
Foam 32 mm thick density 2" thick fixed with back of size 600x300mm as per drg and as directed by Enginee-in-Charge
Polishing complete chairing with french polish with high class finishing (Make- Asian wood tech) after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of table size 900x900x760mm, shape and size as per drawing No FD-291 and as directed by Engineer-in-charge.
Prelaminated MDF board 18mm thick of size 900x900mm with 4mm teak wood round beading all round of table top. Top shall be fixed with full threated paralleded shank machine screw steel complete all as specified and directed.
Leg of 1st class teak wood (Size 740x50x50mm) complete all as specified and as directed
Top long rail made of 1st class teak wood size 800x50x50mm complete all as specified and as directed
Top short rail made of 1st class teak wood complete all as per drgwing.
Polishing complete table with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Chair easy , shape and size as per drawing No FD-229 and as directed by Engineer-in-charge
Rear/Front Leg made of 1st class Teak wood
Side Rail made of 1st class Teak wood
Front/Rear Rail made of 1st class Teak wood
Arm/Handle made of 1st class Teak wood
Polishing complete chair with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Chair easy DC, shape and size as per drawing No DB3972 and as directed by Engineer-in-charge
Front Leg made of 1st class Teak wood
Rear Leg made of 1st class Teak wood
Front and back rail made of 1st class Teak wood
Side Rail made of 1st class Teak wood
Arm/Handle made of 1st class Teak wood
Stiffener made of 1st class Teak wood
Polishing complete chair with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Bed Hard with ply top, shape and size as per drawing No FD- 21, 241, 246, 247 and SK575 as directed by Engineer-in-charge
Head rest with 4mm teakwood beading all around all as specified and directed by Engineer-in-charge
Foot rest with 4mm thick teakwood beading all around all as specified and directed by Engineer-in-charge
Long rail made out of 1st class teak wood as per drg and directed by Engineer-in-Charge
Stiffners of size 60x40x840mm of 1st class teak wood as per drg and directed by Engineer-in-Charge
MS clamps as per drg for holding of MNF set.
12mm thick commercial plywood grade Bur type BB of size (6'-3") x 3' of ISI marked as shown as directed.
Polishing complete bed with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Chair Dining, shape and size as per drawing No FD-279 and as directed by Engineer-in-charge
Front legs made of first class teak wood as per drg and as directed by Engr-in-Charge.
Rear legs made of first class teak wood as per drg and as directed by Engr-in-Charge.
Front rear and side rail made of first class teak wood as per drg and directed by Engr-in-Charge
Stiffener made out of first class teakwood as per drg and directed by Engr-in-Charge
Wooden patti for caning made of first class teak wood as per drg and as directed by Engr-in-Charge
Polishing complete chari with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Chair Writing, shape and size as per drawing No FD-202, 250, 280 and as directed by Engineer-in-charge
Front legs made of first class teak wood as per drg and as directed by Engr-in-Charge.
Rear legs made of first class teak wood as per drg and as directed by Engr-in-Charge.
Front and rear rail of first class teak wood as per drg and directed by Engr-in-Charge
Side rail made of first class teak wood as per drg and directed by Engr-in-Charge.
Arm/handle made of first class teak wood as per drg and directed by Engr-in-Charge.
Stiffener made out of first class teakwood as per drg and directed by Engr-in-Charge
Back head rest rail made out of first class teakwood as per drg and as directed by Engr-in-Charge
Polishing complete chair with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Chair Writing SK with Cushion, shape and size as per drawing No SK-573 and as directed by Engineer-in-charge
Front legs made of first class teakwood as per drg and directed by Engr-in-Charge.
Rear legs made of first class teakwood as per drg and as directed by Engr-in-Charge
Front rail for seat made of first class teakwood as per drg and as directed by Engr-in-Charge
Side rail for seat made of first class teakwood as per drg and as directed by Engr-in-Charge
Front rail for back made of first class teakwood as per drg and as directed by Engr-in-Charge
Side rail for back made of first class teakwood as per drg and directed by Engr-in-Charge
Arm/handle made of first class teakwood as per drg and directed by Engr-in-Charge
Stiffeners seat and back made of first class teakwood as per drg and directed by Engr-in-Charge
Back head rest rail made of first class teakwood as per drg and directed by Engr-in-Charge
Foam cushion (seat) 40 density 75mm thick with markin cloth duly stiched and velvet cloth cover with TKK chain fixed having cost of cover not less than 200/- per mtrs all as directed by Engineer-in-charge
Polishing complete chair with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of stool dressing, shape and size as per drawing No FD-252, 282 and as directed by Engineer-in-charge
Legs made out of first class teakwood all as shown on drg and directed by Engr-in-Charge
Stiffeners made out of first class teakwood all as shown on drg and directed by Engr-in-Charg
Cane patti made out of first class teakwood all as shown on drg and directed by Engr-in-Charge
Polishing complete stool with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Teapoy wooden, shape and size as per drawing No FD-278, 382, 232 and as directed by Engineer-in-charge
Top prelaminated MDF board 18mm thick of size 600x450mm with 4mm teak wood round beading all round of table top. Top shall be fixed with full threated paralleled shank machine screw steel complete all as specified and directed.
Legs made out of first class teak wood all as shown on drg and as directed by Engr-in-Charge.
Long bottom rail for stiffeners made out of first class teakwood all as shown on drg and as directed by Engr-in-Charge.
Short bottom rail for stiffeners made out of first class teakwood all as shown on drg and as directed by Engr-in-Charge.
Polishing complete teapoy with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Chair easy with cushions seat and back, shape and size as per drawing No SK-574 and as directed by Engineer-in-charge
Front legs made of first class teakwood as per drg and as directed by Engr-in-Charge
Rear legs made of first class teakwood as per drg and as directed by Engr-in-Charge
Front rail for seat made of first class teakwood as per drg and directed by Engr-in-Charge
Side rail for seat made of first class teakwood as per drg and directed by Engr-in-Charge
Front rail for back made of first class teakwood as per drg and directed by Engr-in-Charge
Side rail for back made of first class teakwood as per drg and directed by Engr-in-Charge
Arm/handle made of first class teakwood as per drg and directed by Engr-in-Charge
Stiffeners for seat and back made of first class teakwood as per drg and directed by Engr-in-Charge
Foam cushion 40 density 75mm thick with markin cloth duly stiched and velvet cloth cover including one side TKK chain fixed with cover for seat and back. Velvet cloth as per approved colour and quality cost of cloth shall not less than 200/- per mtr. Size 420 x 460 x 75mm as per drg or as directed by Engir-in-charge
Polishing complete chair with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Table 3'x2' without drawer and table examination, shape and size as per drawing No FD-223, 1F(S) and as directed by Engineer-in-charge
Pre laminated MDF board of size 900 x 600 mm x 18 mm thick with 4 mm teak wood round beading all around the top. Top shall be fixed with full threated paralleled machine screw steel complete all as per drg and as directed by Engr-in-Charge.
Legs 65x65x760mm made of first class hard wood (teak) as per drg and directed by Engr-in-Charge
Top rail long side size 65x25x740mm made of first class teak wood as per drg and directed by Engr-in-Charge
Top rail short size 65x25x440mm made of first class teakwood as per drg and directed by Engr-in-Charge
Bottom rail size 50x25x440mm made of first class hard wood (teak) as per drg and directed by Engr-in-Charge
Polishing caomplete table with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Almirah large wooden with shelf(TP) all as directed by Engineer-in-charge
Door both side of Almirah large wooden made of first class hard wood teak with panels of size 1880x740x25mm thick each) as directed by Engr-in-Charge
Shelf of Almirah large wooden and providing new shelf of first class hard wood (teak) size 1480x450x19mm thick all as directed by Engr-in-Charge
MS hinges 65mm size all as directed by Engr-in-Charge
Mild steel CP hasp and staple of size 50 mm and fixed with nuts and bolts
Polishing complete almirah with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Table writing Clerk SK with drawer, shape and size as per drawing No SK-571 and as directed by Engineer-in-charge
Top of table writing clerk of size as per drg made out of 18/19 mm pre laminated MDF board exterior grade ISI marked including 4mm thick teak wood half round beading all round the table top fixed properly as per drg and as directed by Engr-in-Charge.
Leg made out of first class teak wood as shown on drg and directed by Engr-in-Charge
Long bottom stiffeners made out of first class teak wood as shown on drg and as directed by Engr-in-Charge
Short bottom stiffeners made out of first class teak wood as shown on drg and as directed by Engr-in-Charge
Knob of writing table clerk of approved quality and as directed by Engr-in-Charge
Drawers of writing table clerk SK as per drawing and directed by Engr-in-Charge
Back made of 6mm thick commercial ply grade BWR type BB of size 585x400mm complete all as per drg and as directed by Engr-in-Charge
Shutter with sliding channel both side for table writing clerk SK as per drg amd as directed by Engr-in-Charge
Polishing complete table with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Chair dining special, shape and size as per drawing No PN/F-26 and as directed by Engineer-in-charge
Front legs made of 1st class Teak wood
Rear legs made of 1st class Teak wood
Front and rear rail made of 1st class Teak wood
Side rail made of 1st class Teak wood
Arm/handel made of 1st class Teak wood
Stiffener made of 1st class Teak wood
Back head rest rail made of 1st class Teak wood
Polishing complete chair with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of old broken / unserviceable top of form wihtout back and providing new top of first class teak wood duly polished, shape and size as per drawing No FD-1027 and as directed by Engineer-in-charge
Spray painting two or three coat of synthetic enamel paint - black 1st quality paints on old painted surface of frame of tipup chair with high class finishing including necessary denting / welding and smoothness of surface all as directed.
Replacement of following old broken / unserviceable parts with new part of Hat Stand, shape and size as per drawing No FD-233, 362 and as directed by Engineer-in-charge
4mm thick teak face decorative plywood IS-1328 ISI mark to Hat Stand fixed with fevicol tipped with teak wood edging all round size 110x710 mm as per drg and as directed by Engr-in-Charge
Mirror of size 300x480x5mm thick as per drg and as directed by Engr-in-Charge
Peg set 100 mm aluminium of ISI marked
Polishing complete hat stand with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Sofa Set Four/Five seater, shape and size as per drawing No FD-258, 281, 373 and as directed by Engineer-in-charge
Front legs made out of first class teak wood as shown on drg and as directed by Engr-in-Charge
Rear legs made out of first class teakwood as shown on drg and as directed by Engr-in-Charge
Front side long rail made out of first class teak wood as shown on drg and as directed by Engr-in-Charge
Rear side long rail made out of first class teak wood as shown on drg and as directed by Engr-in-Charge
Arm/handle made out of first class teak wood as shown on drg and as direcrted by Engr-in-Charge
Stiffeners long and short made out of first class teak wood as shown on drg and as directed by Engr-in-Charge
Polishing to sofa set 5 seater with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Polishing to sofa set 4 seater with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Table dining six person, shape and size as per drawing No FD-278, 273 and as directed by Engineer-in-charge
18mm pre laminated MDF board exterior grade ISI marked including 4mm thick teak wood half round beading all round the table top.
Legs made out of first class teak wood size 60x60x740mm as shown on drg and as directed by Engr-in-Charge
Top rail of long side made first class teak wood all as directed by Engineer-in-charge.
Top rail of short side out of first class teak wood all as directed by Engr-in-Charge
Polishing complete table dinning with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Table dressing gents, shape and size as per drawing No FD-230, 379 and as directed by Engineer-in-charge
New drawer of preleminated MDF board 12mm thick exterior grade duly fixed with 4mm thick teakwood beading all as per drg and as directed by Engr-in-Charge
Knob acrylic of approved quality as approved by Engineer-in-Charge.
Looking mirror of first class quality ISI marked size 760x380x5mm thick as per sample complete all as specified and directed by Engr-in-Charge
6mm thick ply wood commercial ISI marked grade BWR Type BB of back side of mirror all as directed by Engr-in-Charge
Polishing complete table dressing with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Table dressing ladies, shape and size as per drawing No FD-251, 378 and as directed by Engineer-in-charge
Drawer of preleminated MDF board 18mm thick exterior grade duly fixed with 4mm thick teak wood beading all as per drg and as directed by Engr-in-Charge
Knob acrylic of approved quality.
Frame of first class hard wood (Teak) including 6mm thick ply wood grade BWR, type BB of back side of mirror duly fixed with frame all as per drg and as directed by Engr-in-Charge
Looking mirror of first class quality ISI marked size 1220x380x5mm thick as per sample.
Polishing complete dressing table with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
Replacement of following old broken / unserviceable parts with new part of Peg Table, shape and size as per drawing No FD-277 and as directed by Engineer-in-charge
Top of table peg of size as per drg made out of 18mm pre laminated MDF board exterior grade ISI marked including 4mm thick teak wood half round beading all round the table top fixed properly as per drg and as directed by Engineer-in-charge
Bottom long rail made out of first class teak wood all as shown on drg and as directed by Engr-in-Charge
Bottom short rail made out of first class teak wood all as shown on drg and as directed by Engr-in-Charge
Legs made out of first class teak wood all as shown on drg and as directed by Engr-in-Charge
Polishing complete table with french polish with high class finishing after rubbing old polish. The surface to be rubbed down to smoothness with sand paper and after dusting of wooden surface shall be filled with filler solution for smoothness all as directed.
M R Taders
Avtarsinghchaddhaandcompany
Bidder Name
M/s R.K.Jain
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .