ILAVUMPARAMBU -AMARPADAM ROAD RENOVATION

Amount

Renovation of road

75.5.5.A.1pb:Modified Penetration Macadam 50 mm thick using Bitumen S-65 - Packed Bitumen Rates <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.

75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.

75.5.2.1pb:Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates <br> Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 <br> By Manual Means <br> Type A <br> (II) Bitumen (S-65)

OD155073/2024-2025:Sectioning old road - Sectioning upto 150mm and forming the surface for old road way including clearing the road way of any debris, leveling, cambering etc complete as per direction of Engineer in charge

OD155072/2024-2025:PCC 1:2:4 - Providing plain cement concrete for road work exclusive of formwork CC 1:2:4 (1 cement, 2 fine aggregate, 4 coarse aggregate) laid to required slope and camber in panels (@3m c/c) as required including compaction using needle vibrator finishing and tampering etc complete. Max size of coarse aggregate not exceeding 25mm mixed in concrete mixer etc complete as per specification. Nominal mix 1:2:4

TONY JOSE

Bidder Name

TONY JOSE

ALI P.P.