Replacement of external water pipe line in sect IV, V,VI And Nagala Pantnagar

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundation trenches or drains (not exceeding 1.5 width or 10 sqm on plan) including dressing of sides and ramming of bottoms. Lift up to 1.5 including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m, All kinds of soil.

Excavating trenches of required width for pipes, cables, etc including Excavation for sockets and dressing of sides, ramming of bottoms. Depth up to 1.5 including getting out the Excavated soil and then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus Excavated soil as directed within a lead of 50m all kinds of soil pipes, cables etc. exceeding 80mm dia but not Excluding 300mm dia.

Providing and laying in position cement concrete of specified excluding the cost of centering and shuttering. All work up to plinth level grade 1:2:4 (1 cement : 2coarse sand (zone-III) :4 Graded stone aggregate 20mm nominal size) .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:5:10(1 cement : 5coarse sand (zone-III) :10 graded stone aggregate 40mm nominal size).

Brick work with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand.

12mm cement plaster of mix 1:6(1cement :6fine sand)

Providing and fixing 15mm dia nominal bore G.I pipes complete with G.I Fittings and Clamps, including cutting and making good the walls etc. internal work-(Exposed on wall)

Providing and fixing 20 mm dia nominal bore G.I pipes complete with G.I Fittings and Clamps, including cutting and making good the walls etc. internal work-(Exposed on wall)

Providing and fixing 25mm dia nominal bore G.I pipes complete with G.I Fittings and Clamps, including cutting and making good the walls etc. internal work-(Exposed on wall)

Providing and fixing 40mm dia nominal bore G.I pipes complete with G.I Fittings and Clamps, including cutting and making good the walls etc. internal work-(Exposed on wall)

Providing and fixing 50 mm dia nominal bore G.I pipes complete with G.I Fittings and Clamps, including cutting and making good the walls etc. internal work-(Exposed on wall)

Providing and fixing G.I pipes complete with G.I Fittings including trenching and refilling etc. 15 mm dia nominal bore.

Providing and fixing G.I pipes complete with G.I Fittings including trenching and refilling etc. 20 mm dia nominal bore.

Providing and fixing G.I pipes complete with G.I Fittings including trenching and refilling etc. 25 mm dia nominal bore.

Providing and fixing G.I pipes complete with G.I Fittings including trenching and refilling etc. 40 mm dia nominal bore.

Providing and fixing G.I pipes complete with G.I Fittings including trenching and refilling etc. 50 mm dia nominal bore.

Providing and fixing G.I pipes complete with G.I Fittings including trenching and refilling etc. 80 mm dia nominal bore.

Making connection of G.I. distribution withbranch G.I. main of nominal bore following size by providing and fixing tee. including cutting and threading the pipetc. Complete 25 to 40 mm nominal bore.

Making connection of G.I. distribution withbranch G.I. main of nominal bore following size by providing and fixing tee. including cutting and threading the pipetc.50 to 80mm nominal bore complete.

Providing and fixing 25mm dia nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end).

Providing and fixing 40 mm dia nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end).

Providing and fixing 50 mm dia nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end).

Providing and fixing 80 mm dia nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end).

Providing and fixing ball valve (Brass) of approved quality high or low pressure with plastic floats complete 15mm nominal bore.

Providing and fixing ball valve (Brass) of approved quality high or low pressure with plastic floats complete 20 mm nominal bore.

P/laying S&S C.I. Standard special such as tees bends ,collars, tapers, caps etc. (Heavy class) up to 300 mm dia.

Providing and laying flanged C.I. Standard specials such as tees, bends, callors, tapers,cors etc. suitable for flanged jointing as per S.I. 1538 up to 300 mm dia.

Providing and laying S&S Centrifugally cast (spun) iron pipes (Class L.A) conforming to I.S.1536 for 100mm dia pipe.

Providing and laying S&S Centrifugally cast (spun) iron pipes (Class L.A) conforming to I.S.1536 for 150 mm dia pipe.

Providing and laying S&S Centrifugally cast (spun) iron pipes (Class L.A) conforming to I.S.1536 for 250 mm dia pipe.

Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead for 100mm diameter pipe.

Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead for 150 mm diameter pipe.

Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead for 200 mm diameter pipe.

Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead for 250 mm diameter pipe.

Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead for 300 mm diameter pipe.

Supplying pig lead as site of work.

Providing flanged joints to double flanged C.I/G.I. pipes & specials 80mm dia pipe including testing of joints.

Providing flanged joints to double flanged C.I/G.I. pipes & specials 100 mm dia pipe including testing of joints.

Providing flanged joints to double flanged C.I/G.I. pipes & specials 150 mm dia pipe including testing of joints.

Providing flanged joints to double flanged C.I/G.I. pipes & specials 200mm dia pipe including testing of joints.

Providing flanged joints to double flanged C.I/G.I. pipes & specials 250 mm dia pipe including testing of joints.

Providing flanged joints to double flanged C.I/G.I. pipes & specials 300 mm dia pipe including testing of joints

Providing and Fixing CI sluice valves (with cap) complete with nut-bolts, rubber insertion etc. (the tail pieces if required will be paid separately) for 100mm diameter class IInd.

Providing and Fixing CI sluice valves (with cap) complete with nut-bolts, rubber insertion etc. (the tail pieces if required will be paid separately) for 150mm diameter class IInd.

Providing and Fixing CI sluice valves (with cap) complete with nut-bolts, rubber insertion etc. (the tail pieces if required will be paid separately) for 200 mm diameter class IInd.

Providing and Fixing CI sluice valves (with cap) complete with nut-bolts, rubber insertion etc. (the tail pieces if required will be paid separately) for 250mm diameter class IInd.

Providing and Fixing CI sluice valves (with cap) complete with nut-bolts, rubber insertion etc. (the tail pieces if required will be paid separately) for 300mm diameter class IInd.

Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4(1 cement : 4coarse sand) for sluice valve, with CI surface box 100mm. top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4mix(1 cement :2 coarse and :4 graded stone aggregate 20mm nominal size) including necessary excavation foundation concrete 1:5:10 (1 cement :5 fine sand :4 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1cement :3 coarse sand) 12 mmm thick finished with a floating coat neat cement complete as per standard design with common burnt clay F.P.S.( non modular) Bricks of class designation 7.5.

Constructing masonry Chamber 120x120x100 cm. inside in brick work in cement mortar 1:4(1 cement : 4coarse sand) for sluice valve, with CI surface box 100mm. top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid an RCC top slab 1:2:4mix(1 cement :2 coarse and :4 graded stone aggregate 20mm nominal size) Including necessary excavation foundation concrete 1:5:10 (1 cement :5 fine sand :10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1cement :3 coarse sand) 12 mmm thick finished with a floating coat a neat cement complete as per standard design with F.P.S common burnt clay F.P.S.( non modular) Bricks of class Designation 7.5.

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) for 15 mm nominal bore.

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) for 20 mm nominal bore.

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) for 25 mm nominal bore.

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) for 40 mm nominal bore.

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) for 50 mm nominal bore.

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) for 80 mm nominal bore.