Re tender Only OEM & Authorized Dealer/Stockist/ Experience

PVC Copper Lead 16mm Squ

PVC Copper Lead 25nn Squ

PVC Copper Lead 35mm Squ

PVC Copper Lead 50mm Squ

PVC Copper Lead 70mm Squ

Flexible Cable Copper Conductor 1.1 KV Grade Copper Flexible Multistrende Lead Size - 120 Squ mm, Red , PVC Coted, Make- Havells/Polycab/KEI

Flexible Cable Copper Conductor 1.1 KV Grade Copper Flexible Multistrende Lead Size - 120 Squ mm, Black, PVC Coted, Make- Havells/Polycab/KEI

Armoured Aluminium Cable 1.1 KV Grade 2.5 Squ mm 4 Core Armoured Aluminium Cable, Make- Havells/Polycab/KEI

Armoured Copper Cable 1.1 KV Grade 4 Squ mm 4 Core , Make- Havells/Polycab/KEI/Finolex

3 Pole Contactor MNX - 65, (1NO+1NC) Volt - 220 Make- L&T (OEM)

3 Pole Contactor MNX - 70, (1NO+1NC) Volt - 220 Make- L&T (OEM)

3 Pole Contactor MNX - 80, (1NO+1NC) Volt - 220 Make- L&T (OEM)

3 Pole Contactor MNX - 95, (1NO+1NC) Volt - 220, Cat No. CS94136 Make- L&T (OEM)

3 Pole Contactor MNX - 140, (1NO+1NC) Volt - 110, Cat No. CS94136 Make- L&T (OEM)

3 Pole Contactor MNX - 225, (2NO+2NC) Volt - 220, Cat No. CS94140 Make- L&T (OEM)

MN-2 Type O.L. Relay Range - 6 to 10 Amp.

MN-2 Type O.L. Relay Range - 9 to 14 Amp.

AVR Contactor - Sprecher + Schuh, CA3 -30L Moter Starter CA3-30L, with over load Relay - CT3 (K) -12-17-23-32, Refet to over load Relay for max Branch Circuit protection, IEC - 947, EN60947, UIMP 8KA, AC-1-690V-45-A, Aux. Cont. 20A, AC -3, Volt. 230/KW -8.7, Volt. 240/KW-9.1, Volt. 400/KW -16, Volt. 415/KW-16, Volt 500/KW -20 & Volt. 690/KW-19, Coil Volt. - 30V DC MFG By - LAKSHMI Electrical Control System Ltd. Coimbatore, India

AVR Contactor - Sprecher + Schuh, CA3 -16C Moter Starter CA3-16C, + CT3 (K) with over load Relay - CT3 (K) -12/-17, CT 3-16, Refet to over load Relay for max Branch Circuit protection, IEC - 947, EN-60947, UIMP -8KA, AC1-690V, AC - 25A, Aux. Cont. 20A, Coil Volt. - 30V DC MFG By - LAKSHMI Electrical Control System Ltd. Coimbatore, India

Aux. Add ON Block CA3-P (2NO+2NC) IEC-947,EN-60947,VIMP-6KV,AC1-690V,AC-16A, for use with Contactor types CS3 & CA-3 MFG By - LAKSHMI Electrical Control System Ltd. Coimbatore, India

CT Operated Thermal Over Load Relay Type ML12L, Range - 340 to 570 Amp, Cat No. SS9412700SO Make - L& T (OEM)

TPN FN - 800 Amp, Cat No. SK 95521 Make-L&T (OEM)

HRC Fuse 800 Amp HN Type Size - 3, Cat No. SF94938, Make - L&T (OEM)

Switch Type - FFO-32A, ITH-32A, UI-500V, UE-415V AC, 50 HZ, IE - A-32A (AC 22A) Ref. - IS13947-3, Patent No. - 157823, Reg. Desing. No. 144739, Cat No. SP01161 Make - L&T

Motor Terminal For 167 HP, RPM - 1440 (As Per Sample) Make- C.G.

Motor Terminal For 215 HP, RPM - 2900(As Per Sample) Make- C.G.

Motor Terminal For 270 HP, RPM - 733(As Per Sample) Make- C.G.

Planetery Gear Box with Motor 1HP Out put RPM - 40, Make - Top Gear

Thrust Ball Bearing 51120, Make – SKF/FAG

Thrust Ball Bearing 51118, Make – SKF/FAG

Thrust Ball Bearing 51116, Make – SKF/FAG

Thrust Ball Bearing 51113, Make – SKF/FAG

Bearing 22216, Make – SKF/FAG

Ball Bearing 6408, Make – SKF/FAG

Bearing 31313, Make – SKF/FAG

Bearing 30315 A, Make – SKF/FAG

Bearing 31312, Make – SKF/FAG

Bearing 6010 2RS, Make – SKF/FAG

Bearing 61852 M, Make – SKF/FAG

Bearing NU 315, Make - SKF/FAG

Bearing NU411, Make - SKF/FAG

Bearing NU 228, Make -SKF/FAG

Bearing 6310 NR, Make - SKF/FAG

Bearing 6415, Make - SKF/FAG

Bearing 51320, Make - SKF/FAG

Bearing 6404, Make - SKF/FAG

Bearing 7226 BCBM, Make-SKF/FAG

Bearing 6024, Make-SKF/FAG

Bearing 72217, Make-SKF/FAG

Bearing 32213, Make-SKF/FAG

Bearing 6213, Make-SKF/FAG

Cylindrical Roller Bearing NU 307 EC, Make - SKF/FAG

Tapper Roller Bearing 30218, Make - SKF/FAG

Tapper Roller Bearing 33212, Make-SKF/FAG

Tapper Roller Bearing 30208, Make -SKF/FAG

Tapper Roller Bearing 30209, Make-SKF/FAG

Tapper Roller Bearing 30207, Make-SKF/FAG

S.S. Sleeve H-322, Make - SKF/FAG

Spare of Sugar Mill Cane Crusher FMG Gear Box Make- Walchand nagar WCN 630,H.P-500 Ratio:-1000/21.25 For 2nd Mill ,2nd Stage intermdiate gear gear teeth -78 Ultrasonic Testing & Dye Penetration Testing on above with Certificate Note :- 1. Gear Material Dyly Manufactured with forged steel Material 18 Cr Ni Mo6 Duly Case Hardend upto 58-62HRC and Teeth Ground DIN 5-6, Correction factor As per DIN STD) 1. Shaft EN-9 Duly forged and through Hardend to have Hardness 28-32 HRC 2. All Forging Testing Certificate Required Make - Walchandnagar

Spare of Sugar Mill Cane Crusher FMG Gear Box WCN 630, For 2nd Mill ,2nd Stage intermdiate Pinion Shaft teeth -21 Ultrasonic Testing & Dye Penetration Testing on above with Certificate Note :- 1. Gear Material Dyly Manufactured with forged steel Material 18 Cr Ni Mo6 Duly Case Hardend upto 58-62HRC and Teeth Ground DIN 5-6, Correction factor As per DIN STD) 1. Shaft EN-9 Duly forged and through Hardend to have Hardness 28-32 HRC 2. All Forging Testing Certificate Required Make - Walchandnagar

Spare of Sugar Mill Cane Crusher FMG Gear Box WCN 630, For 3rd Mill ,Input Pinion Shaft teeth -22 Ultrasonic Testing & Dye Penetration Testing on above with Certificate Note :- 1. Gear Material Dyly Manufactured with forged steel Material 18 Cr Ni Mo6 Duly Case Hardend upto 58-62HRC and Teeth Ground DIN 5-6, Correction factor As per DIN STD) 1. Shaft EN-9 Duly forged and through Hardend to have Hardness 28-32 HRC 2. All Forging Testing Certificate Required Make - Walchandnagar

Spare of Sugar Mill Cane Crusher FMG Gear Box WCN 630, For 3rd Mill ,Input Pinion Shaft Mating Gear teeth-82 Ultrasonic Testing & Dye Penetration Testing on above with Certificate Note :- 1. Gear Material Dyly Manufactured with forged steel Material 18 Cr Ni Mo6 Duly Case Hardend upto 58-62HRC and Teeth Ground DIN 5-6, Correction factor As per DIN STD) 1. Shaft EN-9 Duly forged and through Hardend to have Hardness 28-32 HRC 2. All Forging Testing Certificate Required Make - Walchandnagar

Removing and fixing of existing pinion shaft on new gear for 2 nd mill Ultrasonic Testing & Dye Penetration Testing on above with Certificate Note :- 1. Gear Material Dyly Manufactured with forged steel Material 18 Cr Ni Mo6 Duly Case Hardend upto 58-62HRC and Teeth Ground DIN 5-6, Correction factor As per DIN STD) 1. Shaft EN-9 Duly forged and through Hardend to have Hardness 28-32 HRC 2. All Forging Testing Certificate Required Make - Walchandnagar

Removing & fixing of input gear For 3rd Mill ,Input Pinion Shaft Mating Gear Ultrasonic Testing & Dye Penetration Testing on above with Certificate Note :- 1. Gear Material Dyly Manufactured with forged steel Material 18 Cr Ni Mo6 Duly Case Hardend upto 58-62HRC and Teeth Ground DIN 5-6, Correction factor As per DIN STD) 1. Shaft EN-9 Duly forged and through Hardend to have Hardness 28-32 HRC 2. All Forging Testing Certificate Required Make - Walchandnagar

Removing &fixing of existing Bearings & new bearing fitting. 1. Gear Material Dyly Manufactured with forged steel Material 18 Cr Ni Mo6 Duly Case Hardend upto 58-62HRC and Teeth Ground DIN 5-6, Correction factor As per DIN STD) 1. Shaft EN-9 Duly forged and through Hardend to have Hardness 28-32 HRC 2. All Forging Testing Certificate Required Make - Walchandnagar

Rectification of Dynamic Juice Heater Scope of Work eligible manufacturers for carrying out rectification and restoration work of the Dynamic Juice Heater installed in the Quintuple Effect Evaporator Set working platform between 4th and 5th evaporator body Equipment Details - Equipment: Dynamic Juice Heater - Heating Surface Area: 350 m² - Total Number of Passes: 32 - Tubes per Pass: 21 - Installation Location: Working platform of the Quintuple Effect Evaporator Set, approximately 8 metres above ground level. Existing Defects 1. Heavy short-circuiting of juice is taking place between the heater compartments. 2. The top and bottom covers are slightly concave due to improper facing (machining), resulting in ineffective sealing. 3. The sealing rubber cord channel depth is uneven, varying from approximately 2 mm to 7 mm. 4. Due to the uneven channel depth, the rubber sealing cord cannot be fitted properly, causing leakage between compartments. 5. Consequently, the heat transfer efficiency of the Dynamic Juice Heater has reduced to approximately zero, making the equipment ineffective for normal operation. Scope of Rectification The successful bidder/manufacturer shall carry out the following works: 1. Precision facing/machining of the top and bottom covers to restore complete flatness. 2. Removal of the existing rubber cord channels and machining/providing new rubber cord channels with uniform depth and dimensions as per the original manufacturer's design/specifications. 3. Supply and installation of suitable rubber sealing cord of the required quality and size. 4. Reassembly, alignment, sealing, testing, and commissioning of the Dynamic Juice Heater. 5. The bidder shall ensure complete elimination of inter-compartment juice short-circuiting and restoration of the heater to its designed heat transfer efficiency. 6. All labour, tools, tackles, machinery, consumables, transportation, testing, and safety arrangements required for execution of the work shall be included in the contractor's scope..A

Soot blower complete system suitable for boiler working pressure 45kh/cm2 gt Temp..450C A- Rotary fix type for economiser -1No., B- Super heaterzone - 1No., C- Boiler furnace area/water wall zone Zone - 1 No

HDPE Sugar bags stitching machine Modol Medway 2000 HS, Make- Medway Specification - Power: Recommend 0.37kW Motor to drive stitcher Sewing Speed : 24-51 feet per minute, Stitch Length : 8.0-9.5mm

EP Rubber belt for sugar elevator width 480mm length 65meter thickness 14mm 6 ply grade 24/ Super abration resistant, food grade Make- Pentagon rubber/ Soni Conveyor belt/ Fennar conveyor belt/ Oriental rubber industries

UOM Name

Percentage

% of Cost of Bridge (excluding Maintenance) sanctioned by competent authority

Per mile

1000 piece

Print

Per Diem Rate

MAN DAYS

1 Piece

1 Strip

PRINT