REPAIR TO DECORATIVE CEILING/WALL PANELLING AND OTHER MISC WORK OF GUEST ROOMS OF OFFRS MESS AT DGRE RDC MANALI.

Amount

S&F in repair for 25mm pile height Synthetic Glass mating to wall having following properties grass blades are usually made from durable synthetic materials as nylon, polyethylene, or polypropylene,The backing made from a strong, weather-resistant polyurethane, infill with rubber granules. Before Fixing on wall it should be ensure the wall surface is clean,dry and free of debris, Use a soft-bristled brush to remove any loose paint or dirt,Apply the weatherproof adhesive evenly on the back of the artificial grass and on the wall surface. Make sure to cover the edges well to prevent lifting.Press the artificial grass firmly onto the wall, starting from the top and working your way down. Smooth out any air bubbles or wrinkles, Ensure seams are well-aligned and glued to create a seamless appearance. complete all as specified and directed by Engr-in-Charge.

S/F in repair for 1.5mm thick PVC sheets laminated plain coloured marble mosaic or molted finish laid with rubber based adhesive in floors and skirtings etc complete all as specified and directed by Engineer-In- Charge.

S & F in repair for wooden coloured interlocking tiles 1215 X 168 X 8 mm thick rectangular in floor/ dado laid over existing floor with foam sheet of approved best quality including joint/ polished end covering strip of Approved make, complete all as specified and directed by Engineer-In- Charge.

M & L for dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the permises complete all as specified and directed by Engineer-In- Charge

M&L for non - skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-in- Charge.

M & L for glazed ceramic coloured tiles in verticle surfaces joint free with glazed economy finish Grade B-II (b) of size 300 x 600mm or bigger size 7 mm thick as approved set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 10 mm thick rendering in cement mortar in CM 1:3 for Dado etc., complete all as specified.

Dismantling wall and ceiling board,of any description complete all as specified and directed by Engr-in-Charge

S&F false ceiling with 4mm thick E-board of approved make white prelaminated set embosed rainforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section runner made of 0.33mm GI sheet and angle made of 0.45mm, GI sheet suspected with 4mm dia GI wire including two coat of plastic emulsion paint over one coat primer complete all as specified. Note. All exposed surface of grid work shall be powder coated white.

M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in Wall/ceiling complete all as specified and directed by Engr-in-Charge..

Dismentling timber in fillets,rails,posts,rafter, purlin etc under 40 Sqcm in section.complete all as specified and directed by Engr-in-Charge.

S&F plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area Exc 13 and not Exc 25 Sqcm all as specefied.

S&F plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area Exc 3 Sqcm and not Exc 6 Sqcm complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new surfaces and applying three coats of white wash as in ceiling complete all as specified and directed by Engr-in-Charge

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge

S&F mild steel of joist channel, angle, Tee section, or hollow tubes (rectangle /square /round) fixed indepently without connecting plates confirming to Grade Fe 410-0 or Gde E-250 quality( A) complete all as specified and directed by Engr-in-Charge

M&L for preparation of newly steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over and incl a coat of red oxide complete all as specified and as directed by Engr-in-charge.

S & F in repair, Vitreous China wash down water closet pan (Pedestal Pattern in one-piece unit) 700 x 365 x 770 mm and Dual Siphonic flushing cistern(PVC), flat bottom, white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube fixed in repair incl making connection to inlet flush pipe and incl supply of 'P' or 'S' trap with extra long arm complete and making good the disturbed portion etc. all as specified and directed.

S&F in repair, sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long complete all as specified and directed by Engineer-in-Charge.

S&F brass CP WHB Mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F Brass CP Bath Mixer for with teliphonic shower rose screwed down for iron pipe and fixed in repair, complete all as specified and directed by Engineer-in-Charge.

S&F in repair, stainless steel curtain rod with fixing brackets, stops, rollers etc. all as specified & directed by Engr-in Charge . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

M/S. TARA ENTERPRISES (BID ID -3154395)