PAKHAUTI SOLAR PUMPING WATER SUPPLY SCHEME 2022-23

Amount

Civil Works

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). including supply of all material,labour,T&P etc.required for proper completion of work.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Excavation of pipeline trench in Soil mixed with Boulder, lift upto 1.5m, lead upto 30m. Including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60m from trenches including supply of labour, T&P etc complete.

Boulder and bazari

Supply and Carting , laying jointing (including cost of jointing materials like specials and fittings, white lead, hemp and oil etc.) fixing and testing of M.S. galvanised screwed and socketed pipes (Medium quality).including cutting and threading etc. complete confirming to IS:1239 (Part-I) make of pipe:Jindal (Hisar)/Parkash Surya/ TT Swasthik

GI Pipe 15 mm dia (Medium Qualty)

GI Pipe 20 mm dia (Medium Qualty)

GI Pipe 25 mm dia (Medium Qualty)

GI Pipe 32 mm dia (Medium Qualty)

GI Pipe 40 mm dia (Medium Qualty)

GI Pipe 50 mm dia (Medium Qualty)

GI Pipe 65 mm dia (Medium Qualty)

Supply and Carting, of following sizes of MSERW YST210 grade plain ended pipes from store to site of work, lowering them into trenches, laying true to alignment & gradient, laying & Jointing of Pipe by electric welding, making horizontal & vertical bends of any degree as per site conditions including cutting of pipes for making up lengths as required for completion of works & also including cost of welding materials (Advani make welding rods), all other materials,labours & T&P etc. required for proper completion of work.

40 mm (3.2mm thick)

Providing and fixing gun metaled Gate valves as per IS: 778/1997

25mm dia

32mm dia

40mm dia

65mm dia

Supply And fixing of C.I Air Valve 15mm dia

Supply And fixing of C.I.D/ F Non Return Valve Pressure PN16 40mm dia

Supply of all materials, labours, T&P. etc. to construct wheel valve chamber of internal size 0.45x0.45x0.45 mtr of stone masonary, 15mm thick cement plaster with cm 1:4 and with M.S. Cover with locking arrangement as per type design complete.

Supply of all materials, labours, T&P. etc. to construct wheel valve chamber of internal size 0.60x0.60x0.60 mtr of stone masonary, 15mm thick cement plaster with cm 1:4 and with M.S. Cover with locking arrangement as per type design complete.

Supply of all materials, labour T&Petc Construction of R.C.C CWR of following capacities (In kiloliters) with M.S Ladder out side the tank and alluminium ladder inside of the tank M.S M.H cover with locking arrangement , lighting conductor as per electricity rules, water lavel indicator, supply & fixing of out let, in let , over flow and wash out pipes with necessary sluice vales, pipe pieces (Including cost of materials) flooring 0.60 m wide apron , painting on tank body verticl pipes, ladder, M.S M.H cover, ventilator column etc. complete with approved water proosing ( apex/Enamal paint, testing filling water for testing purpose etc. including supply of vertical pipes and special assuming bearing capacity as 10 MT/M2

supply and installation of bucket type chlorinator of 25 liters capacity.including supply of all material, labour, T&P etc.required for proper completion of the work.

Making ferrule connection in the existing main of G.I. or any type of pressure mains with saddle piece, service connections, fittings and fixing of G.M. ferrule including tapping the main, including the cost of all materials like GI Specials,brass bib cock and GM ferrule etc.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) including supply of all material,labour,T&P etc.required for proper completion of work.

Construction of RR dry stone massonry including supply of all material, labour, T&P etc.required for proper completion of the work.

Supply and fixing of Iron Gate with two pillars complete. 2.4 m wide gate

Construction of boundary wall including supply of all material labour,T&P etc required for proper comletion of the work.

Finishing with Food grade Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’ specifications i/c appropriate priming coat, preparation of surface, etc. complete. On steel work

External Dia of Pipe in mm 48.3

Centring and shuttering including strutting,ropping etc. and removal of form for thrust block.

E & M Works

Construction of 1No. 200mm dia, 140Mt. deep Tubewell. No.-1

Construction of 140 Meter deep Mini Tube well by ODEX Rig Machine

(i)Transportation of Odex Rig Machine, with Compressor, O.P. Unit and other relevant T & P upto site of work and back after completion of work.

(ii)Drilling of bore 225mm dia with sinking of 200mm dia pipe by ODEX system from G.L. to 140Mt. B.G.L.

(iii)125mm dia DTH bore

Supply of Tubewell assembly.

(i)Supply of 200 mm dia M.S.E.R.W. plain fincut pipe 8mm thick.

(ii)Supply of 200 mm dia M.S.E.R.W. perforated fincut pipe 8 mm thick.

(iii)200mm dia casing shoe of EN-24 steel.

(iv)200mm dia Tubewell Cap.

(v)Supply of 200x100mm dia size M.S Girder 4Mt. Long.

Dismantling of Rig machine after completion of work. Fitting of girder, clamp and well cap.

Flushing of Tubewell by Air compressor.

Development by O.P. unit

(i) Erection and lowering of O.P Unit.

(ii) Development by O.P unit to get Send free discharge.

(iii) Dismantling of O.P unit and site clearance.

Chemical & Bacteriological Test

S.I.T.C. of Solar Submersible Pumping Plant with Accessories for Tubewell

Supply of submerisble solar A.C/D.C pump with adequate capacitysuitable for 150mm dia Assembly , motor complete with 1.0 Meter cable complete in all respects for deliver 80 LPM at 150 mt Head

Spare Pump Set of same duty.

Supply of solar pump controller (control panel cum starter) suitable for above motor as per following parameters.i)Inbuilt MPPT tracking facility ensuing over load under over voltage protection. Force Air colled, inverse exponential shutdown at the time of lack of radiation.

Solar photovolt mono-perc half cut solar module /PV panel Array 4875 watt as per I.E.C standrad

S/o Submersible copper cable size 1x3x4 sq.mm.

(xi)50mm dia MS threaded column pipe with socket 3Meter each-90 Mtr.

S/o Chemical earthing material for pumping plant including earth electrode, aluminium earth strip etc as per I.E. rules including Safety kit with lightening arrestor, Electrode, Earth strip,Earthing compound, earth kit etc.

Site development for construction foundation for PV module panel and other related items .

Construction of RCC foundation with suitable foundation nut, bolts and supply and fitting of G.I. solar PV module mounting fix type structure to mount all the panels system including panel mounting clamp etc complete in al respect.

Servo Control Voltage Stabilizer 10 KVA suitable for regulating incoming voltage 300 to 480Volt , outgoing voltage 415Volt with suitable size change over switch and 3½Core copper cable as per required HP, first filling of Transformer Oil and complete installation.

Supply of Special tools and spanners with 2 Nos. chain wrench.

Chain link fencing system of suitable size to protect solar PV module system From unathorized intrusion.

Chain pulley block of 1.5 Tonne capacity 4 Mt. lift spur gear tested on 4.5Ton load.

Rubber Insulation sheet 1 mt x 2 mt.X 0.025 mt

Supply and fixing of Electronic type dosing system complete with solenoid coil actuated pulsar circuit, diaphragm & electronically pulp capable of delivery max, 4LPH at 5.5kg./cm2 pressure operated 220Volt single phase A.C. Supply along with chemical injection device and 100Ltrs capacity of media tank complete with accessories.

Liquid Chlorine required for six month maintenance

S/o Chlorine Testing Kit

Internal & external Electrification of Pump house

1 Month trial running and 5 months maintenance including watch & ward.

Installation, commissioning and setting to work and testing of entire equipment installed at site including supply of necessary fixing accessories like insulation, teflon tape etc.

M/S Rishikesh Upadhyay