Construction of appurtenants works allied works at Fatehpora Phase 1st Baramulla B.W.O SITC of internal electrification with protective and controlling devices, wiring, sub boards with earthing, lighting fixtures, fans etc, and all other electrical a

Wiring for Light point/Exhaust fan point with (P+N+E) 3x1.5 sq.mm FRLS-H PVC insulated Multi strand Copper conductor single core cable in surface/recessed Conduits.The job including cost of Circuit Wire (6/8 points per circuit) in 2.5 sq.mm (with 1x2.5 sq.mm) for earth Multi strand Copper wire from Switch board to D.B complete (Havells/Polycab/Anchor /Finolex/ eq. make to be approved by EIC),including cost of Conduits with other accessories like bends,Deep Junction Boxes,Surface Junctions etc to be laid in wall/ceiling(Slab) complete, with 01 No.of 6 Amp Modular Switch,Modular Plate,Cover in front,Modular blanking plate where required & suitable GI box etc ISO/IEC Certified Havells/ Legrand/Panasonic/Anchor Rooma Plus/Schneider/ ABB / eq. make & shall be approved before execution of work.

Wiring for Ceiling fan point with (P+N+E) 3x1.5 sq.mm FRLS-H PVC insulated Multi strand Copper conductor single core cable in surface/recessed Conduits(Havells/Polycab/Anchor /Finolex / eq. make to be approved by EIC) including cost of Conduits with other accessories like bends,Fan Junction Boxes to be laid in ceiling etc complete with 01 No. of 6 Amp Modular Switch,Two Module Stepped Type Electronic Fan Regulator, Modular Plate,Cover in front and suitable GI box etc ISO/IEC Certified Havells/ Legrand/Anchor Rooma Plus/Schneider/ABB / eq. make & shall be approved before execution of work.

Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab/Anchor/Finolex / eq. make to be approved by EIC) including cost of Conduits with other accessories like bends,etc complete to be laid in wall and finishing the surface to its original shape by cement mortar plastering, with 01 No. of 16Amp,Modular switch, Modular 01 No. of 3-PIN 16Amp Socket, Modular plate, cover in front,Modular blanking plate where required and suitable GI box etc ISO/IEC Certified Havells/Legrand/Anchor Rooma Plus/Schneider/ eq. Make & shall be approved before execution of work.

Wiring for 6Amp Plug (Computer) with (P+N+E) 3 x 2.5 sq.mm FRLS PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab /Anchor/Finolex / eq. make to be approved by EIC),including cost of Conduits other accessories like bends etc complete to be laid in wall and finishing the surface to its original shape by cement mortar plastering,with 02 No. of 6 Amp Modular Switch, 02 No.of Modular 6 Amp.of 5-PIN Socket,Modular Plate,Cover, Modular blanking plate where required and suitable GI box etc ISO/IEC Certified Havells/Legrand/ Panasonic/Anchor Rooma Plus/Schneider/ eq. Make & shall be approved before execution of work.

Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/Recessed medium class PVC conduit (Havells/Polycab/Anchor/Finolex Make) including cost of Conduits with other accessories like bends etc complete to be laid in wall/ceiling(Slab) & shall be approved before execution of work.

2x6 Sq.mm + 1 X 4 Sq mm EARTH WIRE [Lighting Sub Main in one run]

2x10 Sq mm + 1 X 6 Sq mm EARTH WIRE [Heating Sub Main in one run]

Supply/Fixing/Testing and Commissioning of SP 6Amp to 32Amp Rating ,240v,*C* Curve 10K, Miniature Circuit Breaker suitable for inductive load in existing MCB . DB Complete with connections. (Havells/L&T/Siemens/Legrand/ABB /Schneider Make)

Supply/Fixing/Testing and Commissioning of following rating, Double pole, (P+N) 240 V, C* Curve 10K,Miniature Circuit Breaker (MCB) in the existing MCB DB complete with connections. (Havells/L&T/Siemens/Legrand/ABB/Schneider Make)

Supplying and Fixing of MCB 8-Way (4+24) horizontal typed , sheet steel, Double Door Distribution Board, TPN 240V/415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required.(Havells/L&T/Siemens/Legrand/ABB /Schneider / eq. make to be approved by EIC)

ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER Rod EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance value Supplying, Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 02 No. bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 20mm Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through DWC High Density Poly Ethylene Pipe (HDPE) having Corrugation complete job.

Supply/Installation/Testing and Commissioning of 18W+ LED Surface/Concealed light (TRIM CLIP ON LED PANEL 3000K Mounted Panel light luminary fitting round shape with minimum system lumen efficency of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In- built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India authorised lab . The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/Havells/Crompton/ Jaquar / eq. make to be approved by EIC should be Commercial.

Supply/Installation/Testing and Commissioning of 1200 mm sweep, ceiling fan with 03 No. blades, 30 cm long down rod, 02 No. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase Supply, etc. complete as required. USHA/Havells/Polycab/LUKER USA/Anchor / eq. make to be approved by EIC.(3-Star)

Supply/Installation/Testing and Commissioning of 225-250mm Shutter Typed,320 Cu.m/Hr.AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37dB of Following Sizes including connection etc USHA/Havells/Polycab/LUKER USA /Anchor/ eq. make to be approved by EIC

Supply/Installation/Testing and Commissioning of Wall Mounted cubical ,front operated, compartmentalized "MAIN control panel"system fabricated of 16 gauge sheet steel, standing dust& vermin proof with gasket lockable doors, interconnections, crimpling legs bounding to earth suitable to use at 240 volt, 1phase system .The panel is painted with powder coated colour, with following equipments:- 160 Amp DP MCCB of Havells/Legrand/Schneider or L&T make with adequate kA Breaking Capacity = 01 No. Incoming Main 200 Amp D.P Al. bus bar Set= 01 Set. Panel should Also having CUT OUT for DP MCBs(Havells/Legrand/Schneider or L&T / eq. make to be approved by EIC with adequate kA) of Including cost of : Normal Outgoing for Heating/Lighting etc Load (a) 63 Amps DP MCB = 02No. (b) 40 Amps DP MCB = 02 No. Outgoing for Load 32 Amps DP MCB = 01 No. for Inverter 40Amp = 02 No. for lighting 63Amp MCB= 02 No. for Heating etc (complete job)

Supply/Laying/Testing and Commissioning of 70 sq mm 2-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havel’s /with required size of thimbles dully crimped with hydraulic crimping tool including P/Fixing of saddles/clips with making of connection and Partially OVER HEAD if required & partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench.(Havells/Polycab/Finloex/Anchor / eq. make to be approved by EIC)

Supply/Installation/Testing and Commissioning of 10 Watt. LED Mirror Light fitting with Aluminium Body of Philips/Havells/Bajaj/Ledvance / eq. make to be approved by EIC including making of necessary connections Ceiling Rose,Silken wire also with round plates Etc complete.

Providing & Fixing of IK08 IP-66 protected high power 50 Watt LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated potted driver as a unique BIS R number having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=125 Im/wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K 355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR:-High Power LED Flood Light Minimum lumen output 6200 Im of Havells/Crompton/Philips Make as approved and to be installed on outside block including S/F of suitable size of Gyser bolt.The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. ( Phillips/Havells/Jaquar/Wipro / eq. make to be approved by EIC)

Supply/Installation/Testing & Commissioning of 20 KVA Single -Phase SERVO control VOLTAGE Stabilizer of Approved brand COPPER wound of Chinar/AE/Cosco / eq. make to be approved by EIC ISI/1SO/IEC certified for smooth functioning/constant voltage supply having Technical Specifications : Input voltage 90-260 volts(P-N) & output voltage 220 volts ±2% Buck Boost Transformer Copper wound 99.9% ,OIL Immersed COOLING OIL, High cut/Low Cut /Time delay/Over Cut through Micro Control and Spike Protection complete job & having protection of 63Amp DP from output side Complete job.The Job Includes Supply, Installation, Testing & Commissioning of 63 AMP Single Phase change over switch as bypassing Switch of Havells/L&T/ABB/Siemens / eq. make to be approved by EIC ISI marked , incl making of necessary connections. ( To be approved by SDO)

Supply/Installation/Testing/Commissioning of SOLARVERTER Pro PCU 05 KVA/48 V Pure Sinewave Solar Inverter With ISOT Technology, Intelligent Load Sharing & BIS Certified (with 2-Year Warranty), 04 No. of 200Ah,12V Tubular battery (with 72 Months Warranty) & Suitable Trolley Support for Inverter resting & resting of Tubular Battery etc Havells/Luminious/EXIDE /AMRON / eq. make to be approved by EIC.

Supplying, Installation, Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683)suitable for 'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G. and acetylene, and electrical fires

Supplying, Installation, Testing and Commissioning of ABC type Fire Extinguisher 4.Kg. Capacity ISI Mark(IS:15683) and dully certified

Providing and Laying of shock proof rubber mats of 2mm*1mm*12mm thick insize of standard make

Supply/Fixing of water Dispenser with refrigerator Hot and Cold Taps of capacity 10 litres Acrylonitrile Butadiene styrene (ABS) of Blue/Voltas/Honeywell/ eq. make and shall be approved before supplying ( 3star)