Re Construction of Temple to Sri kodanda Ramalayam at Agarthapalem (V), Palakollu (M), West Godavari District

Sri Kodanda Ramalayam , Agarthapalem (V) Palokollu (M), West Godavari District

Re-Construction of Temple

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted FILLING sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, sales & other taxes and including overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing, overheads & contractors profit complete for finished item of work. (APSS No. 402)

Vibrated Plain Cement Concrete (1:3:6) nominal mix using 40mm size machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials, including all charges for mixing, laying concerete in position, vibrating, curing, centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges, overheads & contractors profit etc.,for finished item of work for footings. (APSS No. 402)

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Ornamental brick work in C.M (1:5) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site, excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing, over heads and contractor profit and excluding seigniorage charges complete for finished item of work. (as per Silpi SSR 2024)

a) Upto Sthambhavargam

b) Above Sthambhavargam (1st Floor)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and includng centering and shuttering etc, but excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing, overheads & contractor profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work,

a) Lintel without vibrating

b) Roof Slab 5" thick (125mm thick )

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc. ,including overheads & contractors profit complete for finished item of work in ground floors.( APSS No.126)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and including overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Supplying and Fixing of black granite cut stone door frame of required size and shape as per plan or as directed during execution of work including cost and conveyance of stone, dressing charges and fixing in position and excluding seigniorage charges and including operational charges, overheads & contractors profit etc' complete' as per Silpi SSR 2024.

a) Cost of Cut Stone

b) Dressing of stone with fine line palamana dressing instead of fine dressing and polishing and padams at top and bottom, naga bandam on verticle stones etc......

C) Fixing charges for door frame in position

Supplying and fixing of black granite cut stone Somasutram Nalam type including cost and conveyance of stone excluding seigninorage charges and including all labour charges with fine palamana dressing including operational charges, overheads & contractors profit etc. complete for finished item of work. as per Silpi SSR 2024.

Ornamental plastering 25mm to 40mm thick with base plastering 12mm to 20mm in C.M (1:3) and top finishing 12mm thick with C.M (1:2) to bring the required ornamentation including fine rendering with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing ,excluding Seigniorage charges, sales & other taxes etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika. Lathalu in Uttara Eludhakam, Pothikas, Nasigudu. Pupha Puskala Adihishtanam, Wherever necessary. including over head charges and contractor profit ( as per Silpi SSR 2024)

a) 2nd class upto SV level

b) 1st Floor - 1st class variety

Ceiling plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Supply and fixing of best teak wood ornamental door shutters with best teak wood frame of 50 mm thick padmam of 62.5 mm thick and fixing of best teak wood rear flank of 40 mm thick as per the standard temple design including cost of frame and flanks and preparation charges, fixing of shutters in position, locking arrangements, overheads & contractors profit etc. complete (Single padmam with padmarekulu and plain frame) asper Silpi SSR 2024.

Supplying and fixing of Metal Brass Stoopi with Stoopi dandam, Bramha randram stone (Gandhapu-Raie) inlcuding cost and conveyance of all materials and labour charges, overheads & contractors profit etc. complete.asper Silpi SSR 2024.

Providing cement Vigrahams using cement, sand, steel reinforcement, Iron mesh, Brick bats, flat tile etc. including cost and conveyance of all materials and all labour charges, excluding seigniorage and scaffolding charges but including curing and operational charges, overheads & contractors profit etc. complete for finished item of work.asper Silpi SSR 2024

a) Garuthamantha /Bootham

b) Nandi/Simham

c) 4 Hands Sitting

d) 2 hands standing

Flooring with Multi red colour Granite 18-20 mm thick upto 2.43m granite stone slabs (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and excluding seigniorage charges and all other taxes on all materials, including cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Providing cladding to walls with Multi red colour Granite 18-20 mm thick upto 2.43m granite stone slabs, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges, sales & other taxes etc., and including overheads & contractors profit complete for finished item of work.

Supply & Fixing of scaffolding Including cost & conveyance of all materials such as casurina poles, bamboos, bamboos mats and coir rope etc., including labour charges complete. asper Silpi SSR 2024

a) Upto 20'0" Height

b) Upto 20'0" to 40'0" Height

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, excluding sales & other taxes, including incidental, operational and all labour charges overheads & contractors profit complete for finished item of work in all floors. SS 911

Re-Construction of Mukha Mandapam

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete

a) Reinforced Cement concrete

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted FILLING sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, sales & other taxes and including overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and including overheads & contractors profit complete for finished item of work. (APSS No. 402)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and includng centering and shuttering etc, but excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work,

f) Roof Slab 5" thick (125mm thick)

g) Ornamental sunshade 2-6' wide

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc. ,including overheads & contractors profit complete for finished item of work in ground floors.( APSS No.126)

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

b) Above Basement

Ornamental brick work in C.M (1:5) using second class well burnt bricks from approved sources using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site , excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing etc., and over heads and contractor profit and excluding seigniorage charges, sales &other taxes complete for finished item of work. (as per Silpi SSR 2024)

a) Ground Floor

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and including overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Ceiling plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., including overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

a) Upto Basement

b) Above Basment

Ornamental plastering 25mm to 40mm thick with base pleastering 12mm to 20 mm in C.M. (1:3) and top finishing 12mm thick with C.M. (1:2) to bring the required ornamentation including fine rendeing with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing etc.,excluding seigniorage charges,sales & other taxes complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika, Lathalu in Uttara Elduhakam, Pothikas, Nasigudu, Pupha Puskala, Adihishtanam whereever necessary, inlcuidng overheads & contractors profit etc., complete.

a) 2nd class variety upto SV Level

b) 1st Floor 2nd Class variety

Ornamental plastering 25mm to 40mm thick with base plastering 12mm to 20mm in C.M (1:3) and top finishing 12mm thick with C.M (1:2) to bring the required ornamentation including fine rendering with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing ,excluding Seigniorage charges, sales & other taxes etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika. Lathalu in Uttara Eludhakam, Pothikas, Nasigudu. Pupha Puskala Adihishtanam, Wherever necessary. including over head charges and contractor profit ( as per Silpi SSR 2024)

a) Chitrakanta Sthambham

B)Providing cement pothikas using cement, sand, steel reinforcement, iron mesh brick bats, flat tiles etc. including cost and conveyance of all materials labour charges, etc. complete. As per silpi SSR 2024.( Puspa Pothikas)

c) Ceiling Padmam (upto 3'0" to 5'0" dia)

d) Salai ( Makarathoranam)

Providing cement Vigrahams using cement, sand, steel reinforcement, Iron mesh, Brick bats, flat tile etc. including cost and conveyance of all materials and all labour charges, excluding seigniorage and scaffolding charges but including curing and operational charges, overheads & contractors profit etc. complete for finished item of work.asper Silpi SSR 2024

a) 4 Hands Sitting

Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., including overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Flooring with Multi red colour Granite 18-20 mm thick upto 2.43m granite stone slabs (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges excluding seigniorage charges and all other taxes on all materials, inlcuding cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Providing cladding to walls with Multi red colour Granite 18-20 mm thick upto 2.43m granite stone slabs, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges, sales & other taxes etc., and including overheads & contractors profit complete for finished item of work.

Supply & Fixing of scaffolding Including cost & conveyance of all materials such as casurina poles, bamboos, bamboos mats and coir rope etc., including labour charges, overheads & contractors profit complete. asper Silpi SSR 2024

a) Upto 20'0" Height

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site,excluding sales & other taxes, including incidental, operational and all labour charges etc.,and including overheads & contractors profit complete for finished item of work in all floors. SS 911

Supply and instalation of Stainless steel grills to mandapam using 304 grade stainless steel Stainless Steel Tubes, sections, plates, sheets & pipes of required as per drawing priscribed by Engineer-in-charge including cost and conveyance of all materials and labours charges Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish, including overheads & contractors profit etc., complete

Supply and wiring with 2 run of 1.5 Sq.mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable in existing pipe with supply of 6A / 10A, 1 Way, 1 Module Modular Switch, 3 Plate Jumbo Ceiling Rose and Modular switches with cover plate and GI switch box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Cable Makes: Finolex / RR kabel / Havells /Finecab/ KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/ Anchor/ Million/ APAR(Anushakthi), Switch & ceiling rose Make : Anchor/Goldmedal olive, Modular frame Make : Legrand/Schneider(Clipsal x).including overheads & contractors profit but excluding sales & other taxes complete

Supply and Fixing of 25mm outer dia (1.60 -1.80) mm thickness medium grade with IS:9537-part 3 rigid PVC Conduit with all accessories fixing on chromium plated metallic base saddles and along with raw plugs, 32mm screws, 25mm 1,2,3,&4 way junction boxes, 25mm PVC bends, 8 or 9 module hot dip galvanized metal boxes for switches for Light, Fan and separate plug point including all labour charges etc., complete. PVC Bends, PVC pipes & Junction boxes Makes: Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/ Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC, including overheads & contractors profit, but excluding sales & other taxes etc., complete

Supply of run of 2 of 22/0.3mm (1.5 Sq.mm) ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes:Finolex/RRkabel/ Havells/Finecab/KEI/Polycab/ Gloster/ Goldmedal/GM / Fortune Arrt/ Anchor/ Million/ APAR(Anushakthi), including overheads & contractors profit, but excluding sales & other taxes etc., complete

Supply of run of 2 of 4 Sq mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster /Goldmedal/GM/ Fortune Arrt/ Anchor/Million/ APAR (Anushakthi), including overheads & contractors profit, but excluding sales & other taxes etc., complete

Supply and fixing of 1 No 16A/6A, 1 way, Combi Socket Modular Socket with shutter and 1 No 16A / 20 A switch, 3 Module Hot dip galvanized Metal Box including earth connection and all labour charges etc., complete on wall. Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/ Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal (GIFA)/ Million (M-VEE)/ Anchor (Roma PLUS)/ Precision (Series7) /Honeywell (Blenzepro) , including overheads & contractors profit, but excluding sales & other taxes on all materials etc., complete

Supply and fixing of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with remote and without Regulator. Makes: Atomberg(GV2 )/ Halonix(Plasma) /Havells(Efficiencia Neo)/ Crompton(EN Groove)/Superfan(E281)/RJP(Ecowise), including overheads & contractors profit, but excluding sales & other taxes on all materials etc., complete

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty along with Tw/PVC round blocks, supply of No:8 screws of 35mm, supply of PVC rawl plugs & supply of ISI marked 23/0060 twin core twisted / Flat heavy copper cable wire.. Makes: As per list of recommended brands as category I. Makes: a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / lonix/Jaquar/HPL/GM / GreenLites / Gold Medal/ Eveready/ Rhino/ Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.c) Copper cable Makes: Finolex / Polycab / Havells / Gold Medal, including overheads & contractors profit, but excluding sales & other taxes etc., complete.

Supply and fixing of 9W LED Lamp input voltage 90 to 300V, Color temperature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, along with supply of batten holder/slanting holder ISI Marked in lieu of ceiling rose of light point complete with all connections and all labour charges with 9W LED bulb (for new installation). Makes: Phillips /Crompton / Bajaj / Havells / Halonix/GM/HPLSyska / Green Lites / Fortune Arrt / GoldMedal / Luker/Leo/Orbit /Rhino / GLO LED/Million/ Victoria/ Benlo/ Goldwyn, including overheads & contractors profit, but excluding sales & other taxes etc., complete.

Supply and fixing of 8 Way SPN DB with IP 43, Protection suitable for DP Incomer-1 No, SP MCBs - 6 Nos S.P outgoings and for 1 No incomer etc.,and supply of 40A,DP Isolator along with 6 no of 6-32A, SP MCBs, 10KA,C/D curve ISI Mark complete as per IS 8623; IS 13032; IEC 61439-3. etc., complete Distribution board Makes: Legrand(Ekinox 3) / Schneider-A9/Hager -Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (Formerly L&T)-Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus), MCB Make: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx / Lauritz Knudsen (Formerly L&T)-AU/Indo Asian-Opti pro/ HPL (Techno) /Anchor (Uno Plus), including overheads & contractors profit, but excluding sales & other taxes etc., complete.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters, including overheads & contractors profit, but excluding sales & other taxes etc., complete.

Re-errection of Dwajam

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted FILLING sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, including overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., including overheads & contractors profit complete for finished item of work. (APSS No. 402)

Vibrated Plain Cement Concrete (1:3:6) nominal mix using 40mm size machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials, including all charges for mixing, laying concerete in position, vibrating, curing, centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges, overheads & contractors profit etc.,for finished item of work for footings. (APSS No. 402)

Vibrated Plain Cement Concrete M 20 nominal mix using 20mm size hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and excluding cost of seigniorage charges on all materials, including machine mixing, lift charges, laying concrete,vibrating, curing, overheads & contrctors profit etc., complete for finished item of work (APSS No. 402 & 403) For Dwajam

Ornamental brick work in C.M. (1:5) using common burnt clay bricks well burnt bricks from approved sources using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site, excluding seigniorage charges, sales & other taxes, excluding scaffolding for construction of masonary but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing, overheads & contractors profit etc complete for finished item of work.

Ornamental plastering 25mm to 40mm thick with base pleastering 12mm to 20 mm in C.M. (1:3) and top finishing 12mm thick with C.M. (1:2) to bring the required ornamentation including fine rendeing with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika, Lathalu in Uttara Elduhakam, Pothikas, Nasigudu, Pupha Puskala, Adihishtanam whereever necessary, including overheads & contractors profit, but excluding seigniorage charges, sales & other taxes etc., complete.

a) 2nd class Upto Sthambhavargam

Providing medium teak wood for dwajasthabham including cost and conveyance of wood, landing cost including loading and unloading, labour charges for shapping and cutting the log errection, on cut stone base, inclduing cost of Meghalalu, brass sheet, brass bells etc. complete as per approved plan. (As per silpi SSR 2024) , including overheads & contractors profit, but excluding sales & other taxes etc., complete.

a) Cost of Dwajam

b) Cutting & Shapping

c) Granite Stone Bed

d) Supplying and Fixing of Megalalu,Upadandams etc., in teak wood including cost and conveyance of all materials and labour charges etc complete.

e) Supplying and Fixing of Brass bells including cost and conveyance of all magterial and all labour charges etc, complete

f) Errection of Dwajam

Supplying and fixing of Metal Brass Stoopi with Stoopi dandam, Bramha randram stone (Gandhapu-Raie) inlcuding cost and conveyance of all materials and labour charges,overheads contractors profit etc. complete.asper Silpi SSR 2024, but excluding sales & other taxes etc., completed

Supply & Fixing of brass sheet covering to Dwajam using 12 to 18 guage sheet including cost and coveyance of all materials, such as brass sheet, Brass nails polishing and all labour charges, overheads & contractors profit etc. complete as per approved plan

Supplying and fixing of Granite stone Balipeetam of required size and shaper as per plan including cost & conveyance of stone,dressing charges and fixing charges, overheads & contractors profit etc., completed

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, excluding sales & other taxes, including incidental, operational and all labour charges etc., including overheads & contractors profit complete for finished item of work in all floors. SS 911

Construction of Vahanasala

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., including overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted FILLING sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P, overheads & contractors profit etc., excluding seniorage charges, complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering shuttering :

f) Sunshade 2.0 wide

h) Roof Slab 125mm thick

i) Bell Type Sunshade 2.6" wide

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials, including overheads &contractors profit etc. , complete for finished item of work in ground floors.( APSS No.126)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab, including overheads & contractors profit etc., complete for finished item of work. (APSS No. 901 & 903).

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads & contractors profit etc., complete for finished item of work. (APSS No. 501 & 504).

b) Super Structure

Ornamental brick work in C.M (1:5) using second class well burnt bricks from approved sources using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site, excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing etc., and including over heads and contractor profit and excluding seigniorage charges, sales & other taxes complete for finished item of work. (as per Silpi SSR 2024)

a) Above SV Level

Ornamental plastering 25mm to 40mm thick with base plastering 12mm to 20mm in C.M (1:3) and top finishing 12mm thick with C.M (1:2) to bring the required ornamentation including fine rendering with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing ,excluding Seigniorage charges, sales& other taxes etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika. Lathalu in Uttara Eludhakam, Pothikas, Nasigudu. Pupha Puskala Adihishtanam, Wherever necessary. including over head charges and contractor profit ( as per Silpi SSR 2024)

a) Above SV 2nd Class Variety

Providing and fixing factory-made uPVC any colour sliding glazed window up to 1.50 m in height dimensioncomprising of uPVC multi- chamberedframe with in-built roller trackand sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) BMT-P.80.A , including overheads & contractors profit, but excluding sales & other taxes on all materials etc, complete.

Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top , 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1000mm x 2100mm), but excluding sales & other taxes on all materials etc, complete

Plastering 12mm thick single coat in CM(1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing, overheads & contractors profit as directed by Engineer-in-charge etc., complete for finished item of work.(SS 901,903 & 904)

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

a) Upto Basement (Outside)

b) Super Structure (Outside)

Flooring with glazed vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality confirming to IS:13711, IS:13712, IS:13630 (Parts 1to 15) of any colur and finish in all shades and designs. as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) excluding of seigniorage charges on all materials, including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and including overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing skirting to internal walls to 10 cm height/risers of steps with glazed vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality 1st quality conforming to IS 13711 & I13712 &IS13630 length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges, sales & other taxes etc., complete for finished item of work, but including the cost of conveyance of all materials, overheads & contractors profit et., complete

Supplying and fixing of Mild steel Grill of approved design including cost of steel rods fabrication charges and including all incidental ,conveyance and fixing charges, overheads & contractors profit etc., as per SSR BMM-V.14 & 15

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, excluding sales & other taxes, including incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work in all floors.

Re-Construction of Compound Wall

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted FILLING sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, including overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and including overheads & contractors profit complete for finished item of work. (APSS No. 402)

Vibrated Plain Cement Concrete (1:3:6) nominal mix using 40mm size machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials, including all charges for mixing, laying concerete in position, vibrating, curing, centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges, overheads & contractors profit etc.,for finished item of work for footings. (APSS No. 402)

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and including overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Ornamental brick work in C.M (1:5) using second class well burnt bricks from approved sources using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site , excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing etc., and including over heads and contractor profit and excluding seigniorage charges, sales & other taxes complete for finished item of work. (as per Silpi SSR 2024)

a) Upto Sthambhavargam

b) Above Sthambhavargam

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., including overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., including overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Ornamental plastering 25mm to 40mm thick with base pleastering 12mm to 20 mm in C.M. (1:3) and top finishing 12mm thick with C.M. (1:2) to bring the required ornamentation including fine rendeing with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika, Lathalu in Uttara Elduhakam, Pothikas, Nasigudu, Pupha Puskala, Adihishtanam whereever necessary, including overheads & contractors profit, but excluding seigniorage charges, sales & other taxes etc., complete.

a) Upto Sthambhavargam - 2nd Class

b) Above Sthambhavargam - 1st Class

Supply and instalation of Stainless steel grills to mandapam using 304 grade stainless steel Stainless Steel Tubes, sections, plates, sheets & pipes of required as per drawing priscribed by Engineer-in-charge including cost and conveyance of all materials and labours charges Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish, including overheads & contractors profit, but excluding sales & other taxes etc., complete

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, excluding sales & other taxes, including incidental, operational and all labour charges etc.,including overheads & contractors profit complete for finished item of work in all floors. SS 911

Providing Filling & Pradakshina Chapta

Filling with carted filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, and including overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Supply of high strength Cement Concrete terrazzo/pre-polished/ chequered Step tiles with edge rounded and grooved conforming to IS: 13801 using aggregates, cement, pigments of any premium colour, design and of 25 mm thickness set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) excluding seigniorage charges, sales & other taxes on all materials, including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge etc., and including overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., including overheads & contractors profit complete for finished item of work. (APSS No. 402)

Construction of Mukha Dwaram

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, including overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., including overheads & contractors profit complete for finished item of work. (APSS No. 402)

Vibrated Plain Cement Concrete M10- Nominal mix using 40mm size machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials, including all charges for mixing, laying concrete in position, vibrating, curing, overheads & contractors profit etc.,for finished item of work for footings and basement .

Ornamental brick work in C.M (1:5) using second class well burnt bricks from approved sources using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site, excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing etc., including over heads and contractor profit and excluding seigniorage charges , sales & other taxes complete for finished item of work. (as per Silpi SSR 2024)

a) Ground Floor

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering shuttering, overheads & contractors profit etc., complete

a) Roof Slab 5" thick (125mm thick )

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc. ,including overheads & contractors profit complete for finished item of work in ground floors.( APSS No.126)

Ceiling plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., including overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., including overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Ornamental plastering 25mm to 40mm thick with base plastering 12mm to 20mm in C.M (1:3) and top finishing 12mm thick with C.M (1:2) to bring the required ornamentation including fine rendering with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing ,excluding Seigniorage charges etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika. Lathalu in Uttara Eludhakam, Pothikas, Nasigudu. Pupha Puskala Adihishtanam, Wherever necessary. including over head charges and contractor profit ( as per Silpi SSR 2024), excluding seigniorage charges, sales & other taxes etc, complete.

a) Upto SV Level - 2md class variety

b) Above SV level- 1st class variety

Providing cement Vigrahams using cement, sand, steel reinforcement, Iron mesh, Brick bats, flat tile etc. including cost and conveyance of all materials and all labour charges, excluding seigniorage and scaffolding charges but including curing and operational charges, overheads & contractors profit etc. complete for finished item of work.asper Silpi SSR 2024

a) 2 Hands Standing

b) 2 Hands Sitting

Supply & Fixing of scaffolding Including cost & conveyance of all materials such as casurina poles, bamboos, bamboos mats and coir rope etc., including labour charges complete, overheads & contractors profit. asper Silpi SSR 2024

a) Upto 20'0" Height

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, excluding sales & other taxes, including incidental, operational and all labour charges etc.,including overheads & contractors profit complete for finished item of work in all floors. SS 911

Supply and instalation of Stainless steel grills using 304 grade stainless steel Stainless Steel Tubes, sections, plates, sheets & pipes of required as per drawing priscribed by Engineer-in-charge including cost and conveyance of all materials and labours charges Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish, including overheads & contractors profit, but excluding sales & other taxes etc., complete