Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.8 Cr
EMD Value
₹3.6 L
Closing Date
27 Oct 2026, 3:00 pm6d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (RSP)
Above/Below/Par
WORKS
16 conditions · 4 needing a document upload
10.2.Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIII, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Tenderer having and producing valid electrical contractor's license will only be considered. The OEM or his authorized dealer will be exempted from license.
Similar nature of work is defined as below: - "Supply, Installation, Testing and Commissioning and/or Modification/ Replacement of wiring along with inter Vehicular Coupler, Feeder Junction Box and laying of cable through Aluminium pipe/PVC pipe/rubber hose, necessary fixing arrangement and end termination of AC/NAC passenger coaches over Indian Railways" O R "Supply or Repair/Refurbishment, Installation, Testing & Commissioning of Inter Vehicular Coupler or Feeder junction box or Switch board Cabinet or Power Panel or AC Control panel or Complete coach wiring in AC/Non AC Coaches/ Locomotives/EMU's/Power Car over Indian Railways."
16 conditions · 8 needing a document upload
Whether the document related to GST registration has been uploaded?
Whether the documentary proof regarding fulfilling Technical eligibility criteria has been uploaded?
Whether the documents related to sole proprietorship, Partnership firm, Company registered under Companies Act 2013/Co-operative society etc. has been uploaded?
Please Submit your bank details i.e. Name of the bank along with bank branch code, Account Number, IFSC Code and PAN details.
Please furnish the statement whether the tender is submitted on his own or on behalf of a partnership concern, Company registered under Companies Act 2013/Co-operative society etc.If the tender is submitted on behalf of a partnership concern, Company registered under Companies Act 2013/Co-operative society etc. Please furnish the required document like as partnership deed & Power of Attorney of authorization to sign the tender documents on behalf of partnership firm, MOA (Memorandum of Association) / AOA (Articles of Association) of the company, Certificate of Incorporation, Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company, Board resolution etc.
Please furnish the proof of registration with the Employees Provident Fund Organisation under "Employees Provident Fund and Miscellaneous Provisions Act-1952". (A copy of code number allotted by the Organisation should be furnished. If the code number is awaited, the copy of application (self-attested)
Photocopy of certificate of registration with EPFO (if applicable), Photocopy of certificate of registration with ESIC (if applicable), Photocopy of latest Income Tax Return along with Audit Reports, Photocopy of latest Annual Tax Statement, Photocopy of valid Labour License (if applicable).
Any other Documents required as per Tender Document and IR's GCC,2022 with up to date correction slips.
All the bidders/ tenderer should ensure that they are GST compliant and their quoted tax structure/ rates are as per GST law.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Provision of High capacity IV coupler (500 Amp) & 150 Sq.mm feeder cable for LHB coaches and Power cars (LHB Non AC Coach, LHB AC Coach, LHB AC Double Decker Coach, Power Car, LSLR etc.) at various Division / Workshop over North Western Railway.
11of2026-27~NWR~NIT5573638
11of2026-27
Open
Works - General
12 Months
Jodhpur, Rajasthan
₹0
₹3.6 L
5 Oct 2026
5 Oct 2026
13 Oct 2026
39 items across 5 schedules · ₹1,22,84,059.34 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of Copper Crimping Socket at the end terminals of 150 sq.mm. Cable. Conforming to RCF Spec. No. EDTS -200, REV - Nil, Amdt - 1, COR. - 2 Item-1 or latest | Numbers | 1488.00 | 226.07 | 3,36,392.16 |
| 2 | Supply of Copper tubular crimping socket for E - beam cable of size 95 sq. mm with stud size. M 10 to Item No. 5 of RCF specification No. EDTS 200 Rev. Nil AM - 2, Cor.1, 2 and 3 or latest. | Numbers | 248.00 | 117.93 | 29,246.64 |
| 3 | Supply of COPPER TUBULAR CRIMPING SOCKET FLAT TYPE FOR E- BEAM CABLE SIZE 70 SQ. MM, STUD SIZE M-10, ITEM NO. - 8 AS PER RCF SPECIFICATION EDTS-200, REV-NIL, CORR-1 & 2 OR LATEST. | Numbers | 248.00 | 90.27 | 22,386.96 |
| 4 | Supply of COPPER CRIMPING SOCKET 4 SQMM, hole dia. 6.4 mm FOR E-BEAM CABLE TO RCF SPEC NO. EDTS- 201,REV-A,AM-3 TABLE-1 and ITEM NO-08 or latest. | Numbers | 496.00 | 4.38 | 2,172.48 |
| 5 | Supply of Aluminium Alloy Conduit (71 mm. dia wall thickness 3.15 mm) of threadable quality to designation 63400 of table - 1 and condition T6 (New) or WP (old) of table - 2 of IS : 1285 (latest) suitable for electrical wiring, the supply of conduit shall be in standard length of 2.7 meters. | Metre | 1860.00 | 416.28 | 7,74,280.8 |
| 6 | Supply of Aluminium Bend Pipes set (Item 4, 5, 6 & 7 of ICF Drawing no. LWSCZAC - 7 - 1 - 002 Alt 'd') | Set | 62.00 | 9,371.46 | 5,81,030.52 |
| 7 | Supply of Rubber Hose ID 75 mm. conforming to IS: 5821 / 79 in Aluminium pipe of size 71 mm. x 3.5 mm. In length of 2700 mm. Quantity per coach: 6 mtrs. | Metre | 372.00 | 537.13 | 1,99,812.36 |
| 8 | Supply of Fixing Clip 72 mm. Dia. conforming to RCF Drg. No. LP63137. | Numbers | 3472.00 | 23 | 79,856 |
| 9 | Supply of SS Worn driven clip for 100 mm. OD pipe conforming to IS 304. | Numbers | 2480.00 | 21.28 | 52,774.4 |
| 10 | Stripping of the existing layout of IV coupler and Installation, testing & commissioning of High Capacity IV Coupler 500 A and Feeder Junction Box along with laying of thin walled flexible elastomeric cable / Electron beam cable of size 150 sq.mm / 95 sq.mm / 70 sq.mm / 4 sq.mm partially through Aluminium pipe and Rubber Hose together with copper crimping sockets at both end with the help of suitable heat shrinkable sleeves and fixing with Fixing clip / SS Worn driven clip. The work also includes fixing of Jumper cable support link assembly (stainless steel). Accessories materials to be supplied by the firm. (All activities required for the purpose viz. drilling, welding etc. will be carried out by the firm.) | Coach Set | 62.00 | 58,606.72 | 36,33,616.64 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SimilarNatueofWork.pdf
ATTACHMENT
NITEnglish.pdf
ATTACHMENT
NITHindi.pdf
ATTACHMENT
11of2026-27IVcoupler_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .