Construction of Godown at Kalaigaon ICDS Project also and approach culvert, Kalaigaon in Udalguri District for the financial year 2021-22_TN_116_1

Amount

2.8 Earth work in excavation by mechanical means(Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) etc. 2.8.1 All kinds of soil.

11.1 Brick on edge with bricks of class designation 7.5 on a bed of 12 mm mortar including filling the joints with same mortar, with common burnt clay non modular bricks. 11.1.2 1:6 (1 cement :6 coarse sand)

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 4.1.5. In prop. 1:3:6 aggregate 20mm nominal size.

5.22 Steel reinforcement for R.C.C. works including straightening, cutting, bending, placing in position and binding all complete. 5.22.4 Hot rolled deformed bars

5.9 centering and shuttering including strutting, propping etc and removal of form for: 5.9.1 Foundations, footings, bases of columns etc for mass concrete.

5.9.6 mass Column, Pillars, Piers, Abutments, Post & Struts.

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers.

5.9.3 Suspended floors, roofs, landings, etc.

5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- All works up to plinth level. 5.1.2 1:1.5:3 aggregate 20mm nominal size.

5.2 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, etc excluding the cost of centering, shuttering, finishing and reinforcement All works up to plinth level. 5.2.2 1:1.5:3 aggregate 20mm nominal size.

6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in. 6.1.1 Cement mortar 1:4

2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete

4.10 Providing and lying damp roof course 40mm thick with cement concrete 1:2:4 of 12.5mm nominal size.

10.11 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators sidel top/ centre hung with beading and all members such as F7D, F4b, K11B and K12B etc complete. 10.11.1 Fixing with 15x3mm lugs 10cm long embedded in cement concrete block 15x10x10cm of C.C. 1:3:6 etc.

9.48 Providing and fixing M.S. grill of required pattern in frames of windows etc. with M.S. flats, square or round bars etc, including priming coat with approved steel primer all complete. 9.48.1 Fixed to steel window by welding.

10.6 Providing and fixing rolling shutter of approved make made of required size M.S. laths, interlocking together through their entire lath etc. 10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover.

6.34 Brick work with non modular fly ash bricks conforming to IS 12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in. 6.34.1 Cement mortar 1:4

10.16 Steel work in built up tubular (round, square, or rectangular hollow tubes etc) trusses etc, including cutting, hosting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes. 50 mm x 50mm Square pipe

12.1 Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or I hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers etc. 12.1.3 0.63 mm thick with zinc coating not less than 275gm/ m2

12.4 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or l hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers etc. 12.4.2 0.63 mm thick with zinc coating not less than 275gm/ m2

12.59 Providing and fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm etc. 12.59.1 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with Cellulose fiber manufactured through autoclaving process.

10.29 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M. S. Flat 15x3mm and nuts & bolts complete. 10.29.1 Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides.

11.5 62 mm thick cement concrete flooring with concrete hardener topping under Layer 50 mm thick cement concrete in prop 1:2:4 and 12mm thick cement hardener consisting of mix 1:2 etc. complete.

13.2 15 mm cement plaster on the rough side of single or half brick wall of mix: 13.2.1 1:4 (1 cement : 4 fine sand)

11.6 Cement plaster skirting up to 30 cm height, with.cement mortar 1:3 finished with a floating coat of neat cement. 11.6.1 18 mm thick

4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (Zone-III) stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size etc.

10.30 Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with: 10.30.1 4.0 mm thick glass panes.

13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufactures specifications. 13.48.3 Painting steel work with Deluxe Multi surface paint of required shade, Two or more coat applied @ 0.90ltr/10 sqm over and under coat of primer applied @ 0.80ltr/10 sqm of approved brand and manufacture.

13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on new wall surface 13.43.1 water thinnable cement primer

13.44 Finishing wall with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84kg/10sqm)

RCC Box Culvert 2.8 Earth work in excavation by mechanical means(Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sam on plan) etc. 2.8.1 All kinds of soil. Abutment Below return wall:

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 4.1.5 1:3:6 (Zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources

4.1.4). 1:2:4 (Zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources

5.22 Steel reinforcement for R.C.C. works including straightening, cutting, bending, placing in position and binding all complete. 5.22.4. Hot rolled deformed bars.

5.9 centering and shuttering including strutting, propping etc and removal of form for: 5.9.6 mass Column, Pillars, Piers, Abutments, Post & Struts.

5.9.3 Suspended floors, roofs, landings, etc.

5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- All works up to plinth level. 5.1.3 1:2:4 (Zone-III) derived from natural sources :

5.2 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, etc excluding the cost of centering, shuttering, finishing and reinforcement All works up to plinth level. 5.2.2 1:1.5:3 (Zone-III) derived from natural sources :: 3 graded stone aggregate 20 mm nominal size derived from natural sources.

ELECTRICAL WORK 1.8 :- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. Copper conductor single core cable etc. as required. 1.8.1 Group A

1.8.2 Group B

1.14 :- Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 1.14.2 2 x 2.5. sq. mm + 1x 2.5 sq. mm earth wire

1.14.3 2 x 4 sq. mm + 1 x 4 sq. mm earth wire

1.22 :- Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 1.22.3 150 mm x 75 mm x 60 mm deep

1.23 :- Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 1.23.1 5/6 amps switch

1.28 :- Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1.28.2 3 Module

1.34 :- Supplying and fixing brass batten/ angle holder including connection etc. as required.

1.44 :- Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

2.10 :- Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 KA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.10.1 Sing pole

2.10.3 Double pole.

5.1 :- Earthing with G.I earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required.

5.16 :- Providing and fixing 6 SWG dia G.I wire on surface or in recess for loop earthing as required.

MR-1:- Supplying with including fitting fixing Of ceiling fan etc. as directed by the Deptt.

MR- 2:- Supplying with including fitting & Fixing of LED Tube Light- 18 watt. Complete set. (Bajaj) Make as required and as directed by the deptt.

MR - 3 Supplying with including fitting fixing of LED Bulb 9 Watt. Etc. as directed by the Deptt.

NARUTTAM BISWAS

DHARAMSING NARZARY