Construction Work of Multipurpose Hall, Children Park Garden Development with Operations and Maintenance (5-Year), Task Play Ground, Selfie Point and Renovation Work of Garden (Miscellaneous Work) as Per Various Location Chart, At, Savarkundla, Dist.: Amreli Under Swarnim Jayanti Mukhya Mantri Saheri Vikash Yojana (UDP-88) Year 2025-26

NAME OF WORK : CONSTRUCTION WORK OF MULTIPURPOSE HALL, CHILDREN PARK GARDEN

DEVELOPMENT WITH OPERATIONS AND MAINTENANCE (5-YEAR), TASK PLAY GROUND, SELFIE POINT

AND RENOVATION WORK OF GARDEN (MISCELLANEOUS WORK AS PER VARIOUS LOCATION CHART, AT,

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

5 Schedule - "B"- 5

6 Schedule - "B"- 6

7 Schedule - "B"- 7

8 Schedule - "B"- 8

9 Schedule - "B"- 9

10 Schedule - "B"- 10

11 Schedule - "B"- 11

12 Schedule - "B"- 12

13 Schedule - "B"- 13

14 Schedule - "B"- 14

15 Schedule - "B"- 15

16 Schedule - "B"- 16

17 Schedule - "B"- 17

18 Schedule - "B"- 18

19 Schedule - "B"- 19

20 Schedule - "B"- 20

21 Schedule - "B"- 21

22 Schedule - "B"- 22

23 Schedule - "B"- 23

24 Schedule - "B"- 24

25 Schedule - "B"- 25

26 Schedule - "B"- 26

27 Schedule - "B"- 27

28 Schedule - "B"- 28

29 Schedule - "B"- 29

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_______Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 6,94,58,621=00 Put to Tender Rs. 6,94,58,621=00

Add ..............% Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Signature of the Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF MAIN GATE WITH WATCHMAN ROOM

LOCATION : Near Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff

upto all lead and Sretta 27.80 268.92 Cumt

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse

sand : 6 Machine cut stone aggregate 40mm nominal size) and

curing complete including cost of formwork in (a) Foundation and

plinth 6.70 3095.24 Cumt

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork but excluding reinforcement

for reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete. 3.70 4118.64 Cumt

Filling available excavated earth,(Ecluding rock in trenches plinth,

sides of foundation etc.)in layer not exceeding 20 cm, in depth

consolidating each depo sited layer by ramming and watering. 21.00 136.91 Cumt

Filling in plinth with sand under floors including watering ramming,

consoildating and dressing etc. complete 4.80 481.80 Cumt

Providing and laying controlled cement concrete M.200 exposed

work with curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C. work in (A) BEAMS

(ii) Having cross-sectional area more than 0.08Sq.M and upto 5.50 9485.95 Cumt

Providing and laying controlled cement concrete M.200 exposed

work with curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C. work in (B)

COLUMNS:(ii) Having cross-sectional area more than 0.08 Sq.M

and upto 0.18 Sq.M 3.80 12577.32 Cumt

Providing and laying ordinary cement concrete M-20 exposed work

with curing etc. complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C work in (iii) Slabs

having more than 10 cm and upto 13 cm. thickness 2.10 7921.43 Cumt

Providing and laying ordinary cement concrete M-200 for R.C.C lintel

including finishing smooth with,curing etc. complete including the

cost of formwork but excluding the cost of reinforcement. 0.80 8985.97 Cumt

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto floor

two level 2139.80 77.28 Kg

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional 18.20 4245.09 Cumt

Providing 15mm thick cement plaster in single coat on Rough

(Similar) side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar

1:3 (1-cement:3-sand) 73.80 195.42 Sqmt

20mm thick sand faced cement plaster on walls up to height 10 mtrs.

above ground level consisting of 12mm thick backing coat of C.M.

1:3 (1 cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1

cement : 1 sand) etc. complete with interior plastering above floor two

level for every additional storey hight (2) Two coat plaster 139.10 342.41 Sqmt

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc.

complete for light shade 17.40 1264.40 Sqmt

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) and

jointed with gray cement slurry including rubbing and polishing

complete. (A) Marble slab 25mm thick 8.50 2231.50 Sqmt

Providing and laying coloured glazed tiles of the size 300 mm x

mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry. 57.90 1488.23 Sqmt

Providing and laying broken chine mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed. 13.50 779.70 Sqmt

Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 12 cm x 7 cm.

size including anodized alluminium fixtures and fastenings including

primer coat of approved quality and two coats of oil painting etc,

complete. (ii) Fully Panelled. 3.50 5533.67 Sqmt

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24mm x 1.17mm (of

Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track

member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40 mmx18mm

x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949

@ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc 3.50 1583.95 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws.

(A) Plain grill 926.30 106.23 Kg

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning, oil,grease,

dirt and other foreign matter and scoured with brushes fine steel

wood, scrapers and sand paper with ready mixed priming paint

brushing red lead. 46.40 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter. 46.40 92.20 Sqmt

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on wall surfaces to give an even shade

including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth. 73.80 82.85 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete 139.10 120.26 Sqmt

Providing erecting and fixing double coated Syntex PVC. (ISI) water

tank of required capacity each with all necessary fittings and

connection etc. complete on terrace. 1000.00 3.95 Lit

Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials. 20.00 876.90 Rmt

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials. 20.00 72.65 Rmt

Providing and fixing Gun metal check or non-return fullway wheel

valve. (C) 25mm dia. 2.00 420.63 No

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia. 2.00 186.83 No

Providing and fixing cast iron (Spun) Nahni trap of the following

nominal diameter of self cleaning design with C.I. screaed down or

higned grating including cost of cutting and making good the walls

and floor 100mm inlet and 50mm outlet.(C) 100mm dia. 2.00 636.38 No

Providing and fixing wsh down water closet (European type, W.C.

Pan) with integral P or S trap including jointing the trap with soil pipe

in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately) (A) vitreous China Pattern :(i) in

colour 1.00 1356.81 No

Providing and fixing plastic seat and cover for wash down water

closer with C.P. brass hinges and rubber buffers. (B) Black plastic

seal and cover 1.00 291.33 No

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted

white including cutting holes in walls and making good the same but

excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x

150mm size 1.00 1484.89 No

Providing and fixing C.P. brass waste for washbasin or sink. (A)

32mmdia. 1.00 67.91 No

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight. (i) Square mouth traps. (A)

100mm x 100mm size P type. 2.00 1292.19 No

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm.

length. 4.00 101.90 No

Constructing a cooking platform 60 cm. width and 70 cm high resting

on B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (i) Fixing or

precast R.C.C.1:2:4) 8 cm. thick slab with marble chips set in C.M.

(1:6) (6mm thick terrazo) with plastering on exposed faces walls in

C.M. (1:4) etc complete. 3.66 2694.17 Rmt

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type

of pipe erected with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC / Metallic/

Wooden box, single mounting base frame covered with textured/

metallic/white front plate modules erected on /in wall /ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D.

Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III 10.00 485.81 Pt

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III 1.00 674.68 No

Providing & erecting Approved make Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm

sweep complete having 3 blades aluminium body and blade sets

having ornamental design shanks , canopy erected with earthing.

[Make shall be approved by Engineer in Charge] 1.00 2311.89 No

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt , LED driver efficiency > 85% as per

approved vender list make (fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A) Square/

Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20 (iii) 16-

20 watts, Surge-2 KV Cat-lll 6.00 589.84 No

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate, modules erected with

necessary connections as per site situation directed by Engineer In

charge. (7) Blank Plate Single, Cat.III 2.00 25.25 No

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark, Cat.III 4.00 112.11 Each

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF HALL

LOCATION : At Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation up to 1.5 M Depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to

all lead and sretta 50.20 122.93 Cumt

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand

: 6 Machine cut stone aggregate 40mm nominal size) and curing

complete including cost of formwork in (a) Foundation and plinth

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork but excluding reinforcement

for reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete. 11.00 4118.64 Cumt

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (A) BEAMS (ii) Having

cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M Slab

Beam 9.40 9485.95 Cumt

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (A) BEAMS (ii) Having

cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M

Ground Beam 10.70 9485.95 Cumt

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (B) COLUMNS:(ii)

Having cross-sectional area more than 0.08 Sq.M and upto

Sq.M 6.20 12577.32 Cumt

Filling available excavated earth,(Ecluding rock in trenches plinth,

sides of foundation etc.)in layer not exceeding 20 cm, in depth

consolidating each depo sited layer by ramming and watering. 22.70 136.91 Cumt

Filling in plinth with sand under floors including watering ramming,

consoildating and dressing etc. complete 53.70 481.80 Cumt

Providing and laying ordinary cement concrete M-20 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforsement for R.C.C work in (iii) Slabs having more

than 10 cm and upto 13 cm. thickness 26.00 7921.43 Cumt

Providing and laying ordinary cement concrete M-200 for R.C.C lintel

including finishing smooth with,curing etc. complete including the cost

of formwork but excluding the cost of reinforcement. 2.70 8985.97 Cumt

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) for

reinforced concrete Chhajjas not exceeding 10cm. thickness upto floor

two level including finishing the exposed surfaces with cement mortar

1:3 (1-cement, 3 Fine sand) to give a smooth and even surface

centering and formwork and curing complete excluding cost of

reinforcement. 0.80 7160.90 Cumt

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto floor

two level 7125.80 77.28 Kg

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional 61.70 4245.09 Cumt

(i) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in foundation and plinth (B) Conventional

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar 1:3

(1-cement:3-sand) 368.20 195.42 Sqmt

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand) 109.60 145.65 Sqmt

20mm thick sand faced cement plaster on walls up to height 10 mtrs.

above ground level consisting of 12mm thick backing coat of C.M. 1:3

(1 cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1

cement : 1 sand) etc. complete with interior plastering above floor two

level for every additional storey hight (2) Two coat plaster 325.10 342.41 Sqmt

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc.

complete for light shade 116.50 1264.40 Sqmt

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or

L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray

cement slurry including rubbing and polishing complete. (A) Marble

slab 25mm thick 25.80 2231.50 Sqmt

Providing and laying coloured glazed tiles of the size 300 mm x

mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry. 53.30 1488.23 Sqmt

Providing and laying broken chine mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar

creme out upto surface using white cement including rounding off

junctions and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed. 139.20 779.70 Sqmt

Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 12 cm x 7 cm.

size including anodized alluminium fixtures and fastenings including

primer coat of approved quality and two coats of oil painting etc,

complete. (ii) Fully Panelled. 15.20 5533.67 Sqmt

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24mm x 1.17mm (of

Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track

member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm

x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding

shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal

Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm

x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/

with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc 18.80 1583.95 Sqmt

Providing and fixing glazed louvered glass windows and ventilators

with teak wood frame 10cm. x 7cm. size including 3 coats of oil

painting to wood work etc.complete. 1.10 1175.56 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws.

(A) Plain grill 280.80 106.23 Kg

Providing and fixing Galvanised Mild Steel tube Medium Grade

50mm dia. 20.00 298.71 Rmt

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning, oil,grease,

dirt and other foreign matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming paint brushing red

lead. 22.80 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter. 18.80 92.20 Sqmt

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on wall surfaces to give an even shade including

throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth. 314.90 82.85 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete 325.10 120.26 Sqmt

Pro. And fixing single layer water proof gypsum board 12.5 mm thick

sections using water proof board of size 1220 mm x 1830 mm x

mm suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm

center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at

457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm

x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor

fastener, scoch bolt connecting cleat,joining compound top coat on

ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as

per detail drawing as directed 85.70 606.95 Sqmt

Providing erecting and fixing double coated Syntex PVC. (ISI) water

tank of required capacity each with all necessary fittings and

connection etc. complete on terrace. 4000.00 3.95 Lit

Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials. 110mm

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe (SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(C) 25mm dia. 10.00 420.63 No

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia. 10.00 186.83 No

Providing and fixing cast iron (Spun) Nahni trap of the following

nominal diameter of self cleaning design with C.I. screaed down or

higned grating including cost of cutting and making good the walls and

floor 100mm inlet and 50mm outlet.(C) 100mm dia. 5.00 636.38 No

Providing and fixing wsh down water closet (European type, W.C.

Pan) with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately) (A) vitreous China Pattern :(i) in

colour 2.00 1356.81 No

Providing and fixing plastic seat and cover for wash down water closer

with C.P. brass hinges and rubber buffers. (B) Black plastic seal and

cover 2.00 291.33 No

Providing and fixing washbasin with single hole for pillar tap with C.I.

or M.S. brackets painted white including sutting holes and making

good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v 400mm size. (i) In colour. 2.00 1484.89 No

Providing and fixing pillar tap, capstan head, screw down high

pressure with screws, shanks and back nuts. (i) 15mm dia. 2.00 308.72 No

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight.(i) Square mouth traps. (A)

100mm x 100mm size P type. 4.00 1292.19 No

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete. (i) 20mm

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.

(A) 100mm dia. Each 2.00 254.78 No

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm.

length. 10.00 101.90 No

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below type

of pipe erected with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Cat.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed. (f) with medium

class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III 4.00 674.68 No

Providing & erecting Approved make Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep

complete having 3 blades aluminium body and blade sets having

ornamental design shanks , canopy erected with earthing. [ Make

shall be approved by Engineer in Charge] 4.00 2311.89 No

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit

and blower motor with its accessories by means of extra supplied

proper insulated copper tubing,drain PVC pipes suitable for ( cost

includes Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting. (2) For 4/5 Star

Rating of current year, (B) for 1.5 ton capacity- Premium Cat.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper

cable 1.1 KV grade to be erected as directed of following size. (E)

core 2.5 Sq. mm For AC 100.00 137.36 Rmt

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than

0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85% as per approved vender list

make (fitting required LM-79 & LM-80 Certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20 (iii) 16-20 watts, Surge-2 KV

Cat-lll 25.00 589.84 No

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate, modules erected with necessary

connections as per site situation directed by Engineer In charge.(7)

Blank Plate Single, Cat.III 12.00 25.25 No

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark, Cat.III 18.00 112.11 Each

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per phase

isolation type (PPI) (b) sheet steel double door,(ii) 6 way 3.00 2913.85 Each

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80mm having 80-200 Micron

galvanising, Inner pipe dia of 40mm having 200-250 Micron

galvanising, connection terminal dia of 14mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and

heavy duty cover.(approved make OEM has to submit test certificate

including value of earth resistane of installation. (a) For Electrical

Installation up to 440V in normal soil Length of pipe -1 Mtr Back

filling compound-1 Nos Bag of 15 Kg. 2.00 4591.46 Each

Supply, Installation, Testing & Commissioning of following size of Grid

Tied Solar Power Plant with Solar Panels (ALMM approved): Frame

Material : Anodized Aluminum alloy Frame With Twin Wall Profile,

Front Cover : High Transmission Low-Iron Tempered Glass (AR

Coated), High efficency and positive power tolerance Pmax: 0/+5,

Module Efficiency should be approx.18%-21%, Normal operating

temperature 45'C, Junction Box with Waterproof IP67 & MC4

Compatible and Enclosed with Bypass diodes, 100%

Electroluminescence test to ensure error free Modules, Thep. temp.

co-efficient of the PV module shall equal or better than-0.45% /degree

C.Solar PV modules of minimum fill factor 75% to be used. Unit

Production:- 4 to 5 Unit /kw /day (Actual) (1Year Avg) With 10 year

Product warranty and 25 year Linear Power Warranty, Solar Inverter:

MPPT Range: 80-1000 V, Max efficiency: 97.5%-98.9%, O/p

Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor:

~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Anti-

islanding Protection:

Integrated, Input Reverse Polarity Protection Integrated, Insulation

Resistor Detection Integrated, Residual Current Monitoring Unit

Integrated, Output Over Current Protection Integrated, Output Short

Circuit Protection Integrated, Output Over Voltage Protection

Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting

Structure: Seamless Box Pipe / 'C' Channel of suitable size for rooftop

solar installations with good stability agaist wind & weight load., Hot

Dipped Galvanized steel coils. suitable arrangement for base plate for

foundation, solar panel mounting, the structure should be suitable for

carry the load of solar panel,wiring, sprinkler system etc. with

necessary foundation work/wall mount, j bolt, anchor fastner etc. the

nut bolt used for installtion of stucture should be (SS 304) quality. and

Balane of System with necessary Swithgears (Suitabel size and

protection of ACDB & DCDB), inter connecting wiring, earthing

system, lightining arrester system, all liasoning work with various gov.

dipartment like state nodal agency, DISCOM & CEIG is included in

(Excluding GEDA Application fees, Solar connectivity Charges, Meter

connectivity Charges, Meter testing Charges.) 7.00 44081.45 KW

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80mm having 80-200 Micron

galvanising, Inner pipe dia of 40mm having 200-250 Micron

galvanising, connection terminal dia of 14mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover. (approved make OEM has to submit test

certificate including value of earth resistane of installation. (a) For

Electrical Installation up to 440V in normal soil Length of pipe -

Mtr Back filling compound - 1 Nos Bag of 15 Kg. 2.00 4591.46 Each

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- PROVIDING & FIXING OF (WOODEN) FURNITURE WORK

LOCATION : Near Bhesan Sarovar dam, Savarkundla.

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying of King Size Wooden Double Bed deatail as per att.

Specification. Incl. All Taxes and Transportation Charges The work carried

out as per directed by Engineer-in-charge 2.00 33835.00 No

Supplying of Revolving Chair with Knee tilt mechanism deatail as per

att. Specification. Incl. All Taxes and Transportation Charges The work

carried out as per directed by Engineer-in-charge 4.00 6060.00 No

Providing and Fixing Wooden wardrobe with 4 shelves size: H-1500X W-

1100X D-450mm, Finish of exterior / edge, PVC Edge Banding, Material of

Lamination in Top Section, Number of Doors: 2, Opening Mechanism of

Door(s), RFID Lock, Bar Handle, Approved as per choice of users

department and concern officers in charge as directed by the Architect/

Engineer. 2.00 20200.00 No

Supplying of Dressing Table deatail as per att. Specification. Incl. All

Taxes and Transportation Charges The work carried out as per directed by

Engineer-in-charge 2.00 8873.86 No

Supplying of Two Seater Sofa with Tepoi deatail as per att. Specification.

Incl. All Taxes and Transportation Charges The work carried out as per

directed by Engineer-in-charge 8.00 23735.00 No

Supplying of Sleepwell Two Layers Foam Mattress of size 1981 mm x

1829mm deatail as per att. Specification. Incl. All Taxes and Transportation

Charges The work carried out as per directed by Engineer-in-charge

Supplying of Rectangular Cafeteria Chair Without Armrest deatail as per

att. Specification. Incl. All Taxes and Transportation Charges The work

carried out as per directed by Engineer-in-charge 800.00 388.85 No

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF KITCHEN

LOCATION : Near Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-4"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

all lead and sretta 60.10 268.92 Cumt

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :

6 Machine cut stone aggregate 40mm nominal size) and curing

complete including cost of formwork in (a) Foundation and plinth 22.30 3095.24 Cumt

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete. 8.20 4118.64 Cumt

Filling available excavated earth,(Ecluding rock in trenches plinth, sides

of foundation etc.) in layer not exceeding 20 cm, in depth consolidating

each depo sited layer by ramming and watering. 45.20 136.91 Cumt

Filling in plinth with sand under floors including watering ramming,

consoildating and dressing etc. complete 70.40 481.80 Cumt

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (A) BEAMS (ii) Having

cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M 16.80 9485.95 Cumt

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (B) COLUMNS:(ii) Having

cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M 8.60 12577.32 Cumt

Providing and laying ordinary cement concrete M-20 exposed work with

curing etc. complete including the cost of formwork but excluding the

cost of reinforsement for R.C.C work in (iii) Slabs having more than

10 cm and upto 13 cm. thickness 19.00 7921.43 Cumt

Providing and laying ordinary cement concrete M-200 for R.C.C lintel

including finishing smooth with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement. 2.00 8985.97 Cumt

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) for reinforced

concrete Chhajjas not exceeding 10cm. thickness upto floor two level

including finishing the exposed surfaces with cement mortar 1:3 (1-

cement, 3 Fine sand) to give a smooth and even surface centering and

formwork and curing complete excluding cost of reinforcement. 1.60 7160.90 Cumt

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto floor

two level 6953.10 77.28 Kg

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional 46.80 4245.09 Cumt Sche

Providing 15mm thick cement plaster in single coat on Rough (Similar)

side of single or half brick walls for interior plastering upto floor two

level and finished even and smooth in (i) Cement mortar 1:3 (1- 273.90 195.42 Sqmt

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

smooth in (i)Cement mortar 1:3 (1-cement:3-sand) 171.10 145.65 Sqmt

20mm thick sand faced cement plaster on walls up to height 10 mtrs.

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1

cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement :

sand) etc. complete with interior plastering above floor two level for

every additional storey hight (2) Two coat plaster 217.10 342.41 Sqmt

Providing throating or plaster drip and moulding to R.C.C. Chhaja &

Elevation Wall 32.30 43.04 Rmt

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 (1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc.complete for light shade 144.00 1264.40 Sqmt

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) and

jointed with gray cement slurry including rubbing and polishing

complete. (A) Marble slab 25mm thick 45.00 2231.50 Sqmt

Providing and laying coloured glazed tiles of the size 300mm x 200mm x

8 mm / 300mm x 450mm x 8mm in skirting, risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed

with white cement slurry. 76.80 1488.23 Sqmt

Providing and laying broken chine mosaic flooring for terrace using

12mm to 20mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions and

extending them upto 15cm along the wall,clearing with water and oxalic

acid etc. as directed. 145.20 779.70 Sqmt

Providing and fixing 35mm thick shutters for Doors,windows and

clerestory windows including Indian teak wood frames 12cm x 7cm. size

including anodized alluminium fixtures and fastenings including primer

coat of approved quality and two coats of oil painting etc, complete. (ii)

Fully Panelled. 13.30 5533.67 Sqmt

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm (of Jindal

Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member

size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07

Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal

Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@

wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm

(of Jindal Section no:8949 @wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc 11.00 1583.95 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws.

(A) Plain grill 136.80 106.23 Kg

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt

and other foreign matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming paint brushing red 9.20 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter. 9.20 92.20 Sqmt

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on wall surfaces to give an even shade including

throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth. 197.10 82.85 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete 217.10 120.26 Sqmt

Providing erecting and fixing double coated Syntex PVC. (ISI) water

tank of required capacity each with all necessary fittings and connection

etc. complete on terrace. 2000.00 3.95 Lit

Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials. 110mm 25.00 876.90 Rmt

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials. 60.00 72.65 Rmt

Providing and fixing Gun metal check or non-return fullway wheel valve.

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia. 15.00 186.83 No

Providing and fixing cast iron (Spun) Nahni trap of the following nominal

diameter of self cleaning design with C.I. screaed down or higned

grating including cost of cutting and making good the walls and floor

100mm inlet and 50mm outlet. (C) 100mm dia. 5.00 636.38 No

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted

white including cutting holes in walls and making good the same but

excluding fittings. (C) Vitreous China Sink. (i) 600mm x 450mm x 1.00 1484.89 No

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32 mm

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type. 2.00 1292.19 No

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm.

length. 10.00 101.90 No

Constructing a cooking platform 60 cm. width and 70 cm high resting on

B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (i) Fixing or precast

R.C.C.1:2:4) 8 cm. thick slab with marble chips set in C.M. (1:6) (6mm

thick terrazo) with plastering on exposed faces walls in C.M. (1:4) etc

complete. 12.00 2694.17 Rmt

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch /bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front

plate modules erected on /in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III 40.00 485.81 Pt.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity

of following type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed. (f) with medium

class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III 4.00 674.68 No

Providing & erecting Approved make Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep

complete having 3 blades aluminium body and blade sets having

ornamental design shanks, canopy erected with earthing. [Make shall

be approved by Engineer in Charge] 4.00 2311.89 No

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than 0.95, THD

< 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85% as per approved vender list make (fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20 (iii) 16-20

watts, Surge-2 KV Cat-lll 20.00 589.84 No

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate, modules erected with necessary

connections as per site situation directed by Engineer In charge.(7)

Blank Plate Single, Cat.III 10.00 25.25 No

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark, Cat.III 10.00 112.11 Each

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB

to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B) three phase incoming and

single phase horizontal type outgoing Per phase isolation type (PPI) (b)

sheet steel double door, (ii) 6 way 2.00 2913.85 Each

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and

heavy duty cover.(approved make OEM has to submit test certificate

including value of earth resistane of installation. (a) For Electrical

Installation up to 440V in normal soil Length of pipe - 1 Mtr Back

filling compound - 1 Nos Bag of 15 Kg. 1.00 4591.46 Each

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF TOILET BLOCK

LOCATION : Near Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-5"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto all

lead and sretta 58.00 268.92 Cumt

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size) and curing complete

including cost of formwork in (a) Foundation and plinth 11.10 3095.24 Cumt

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete 8.80 4118.64 Cumt

Filling available excavated earth,(Ecluding rock in trenches plinth, sides of

foundation etc.) in layer not exceeding 20cm, in depth consolidating each

depo sited layer by ramming and watering. 44.20 136.91 Cumt

Filling in plinth with sand under floors including watering ramming,

consoildating and dressing etc. complete 23.70 481.80 Cumt

Providing and laying controlled cement concrete M.200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost

of reinforcement for R.C.C. work in (A) BEAMS (ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M 14.00 9485.95 Cumt

Providing and laying controlled cement concrete M.200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost

of reinforcement for R.C.C. work in (B) COLUMNS:(ii) Having cross-

sectional area more than 0.08 Sq.M and upto 0.18 Sq.M 5.10 12577.32 Cumt

Providing and laying ordinary cement concrete M-20 exposed work with

curing etc. complete including the cost of formwork but excluding the cost

of reinforsement for R.C.C work in (iii) Slabs having more than 10 cm

and upto 13 cm. thickness 7.70 7921.43 Cumt

Providing and laying ordinary cement concrete M-200 for R.C.C lintel

including finishing smooth with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement. 1.80 8985.97 Cumt

Providing and laying cement concrete 1:2:4 (1-Cement : 2-Coarse sand: 4-

graded stone aggregates 20mm nominal size) for reinforced concrete

Chhajjas not exceeding 10cm. thickness upto floor two level including

finishing the exposed surfaces with cement mortar 1:3 (1-cement, 3 Fine

sand) to give a smooth and even surface centering and formwork and

curing complete excluding cost of reinforcement. 0.30 7160.90 Cumt

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level 3259.70 77.28 Kg

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional 41.70 4245.09 Cumt

(i) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in foundation and plinth (B) Conventional 41.80 629.83 Sqmt

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement mortar 1:3 (1-

cement:3-sand) 325.80 195.42 Sqmt

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand) 89.60 145.65 Sqmt

20mm thick sand faced cement plaster on walls up to height 10 mtrs.

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1

cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement :

sand) etc. complete with interior plastering above floor two level for every

additional storey hight (2) Two coat plaster 181.70 342.41 Sqmt

Providing throating or plaster drip and moulding to R.C.C. Chhaja &

Elevation Wall 25.50 43.04 Rmt

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for light shade 45.90 1264.40 Sqmt

Providing and laying marble stone slab flooring over 20mm (average)base

of cement mortar 1:6 (1-cement : 6 coarse sand) and jointed with gray

cement slurry including rubbing and polishing complete. (A) Marble slab

25mm thick 21.00 2231.50 Sqmt

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x

8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry. 85.50 1488.23 Sqmt

Providing and laying broken chine mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions and

extending them upto 15 cm along the wall,clearing with water and oxalic

acid etc. as directed. 90.10 779.70 Sqmt

Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 12 cm x 7 cm. size

including anodized alluminium fixtures and fastenings including primer

coat of approved quality and two coats of oil painting etc, complete. (ii)

Fully Panelled. 24.00 5533.67 Sqmt

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section

no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm

x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt),

vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member

size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of

Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal

Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame as per details etc

Providing and fixing glazed louvered glass windows and ventilators with

teak wood frame 10cm. x 7cm. size including 3 coats of oil painting to

wood work etc.complete. 4.60 1175.56 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws. (A)

Plain grill 40.50 106.23 Kg

Providing and fixing Galvanised Mild Steel tube Medium Grade 50mm dia. 10.00 298.71 Rmt

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing red lead. 3.70 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the

surface of all dirt, dust and other foreign matter. 1.70 92.20 Sqmt

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on wall surfaces to give an even shade including

throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth. 240.30 82.85 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete 181.70 120.26 Sqmt

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank

of required capacity each with all necessary fittings and connection etc.

complete on terrace. 4000.00 3.95 Lit

Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials. 110mm 25.00 876.90 Rmt

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 25.00 72.65 Rmt

Providing and fixing Gun metal check or non-return fullway wheel valve.

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia. 14.00 186.83 No

Providing and fixing cast iron (Spun) Nahni trap of the following nominal

diameter of self cleaning design with C.I. screaed down or higned grating

including cost of cutting and making good the walls and floor 100mm inlet

and 50mm outlet.(C) 100mm dia. 12.00 636.38 No

Providing and fixing wsh down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement: 1-fine sand) (Seal and cover to be measured and

paid for separately) (A) vitreous China Pattern :(i) in colour

Providing and fixing plastic seat and cover for wash down water closer

with C.P. brass hinges and rubber buffers. (B) Black plastic seal and

cover 4.00 291.33 No

Providing and fixing water closet squatting Pan (Indian type W.C. Pan)

size 580mm (Earthwork, bed concrete, foot reste and trap to be measured

and paid for separately) (A) Vitreous China.(I) Long pattern = colour

Providing and fixing 100mm size P or S trap for water closet squatting pan

including jointing the trap with the pan and soil pipe in cement Mortar 1:1

(1-Cement : 1-Fine sand) (A) Vitreous China. 4.00 332.39 No

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

550 mm x v 400mm size. (i) In colour. 4.00 1484.89 No

Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15mm dia. 4.00 308.72 No

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white

including cutting holes in walls and making good the same but excluding

fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size 1.00 1484.89 No

Providing and fixing C.P. brass waste for washbasin or sink. (A)

32mmdia. 4.00 67.91 No

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type. 16.00 1292.19 No

Providing and fixing of approved quality including connection the urinal

with weste pipe, trap etc. complete (A) White earthenware flat back or

cornar type size 430mm x 260mm x 350mm 6.00 1074.86 No

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete. (i) 20mm dia.

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet. (A)

100mm dia. Each 4.00 254.78 No

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length. 10.00 101.90 No

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories and earth continuity

of following type, erected on PVC / Metallic / Wooden box, single

mounting base frame covered with textured/ metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium

class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III 15.00 485.81 Pt

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected

on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable

1.1 KV grade to be erected as directed of following size. (E) 3 core

Sq. mm For AC 50.00 137.36 Rmt

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than 0.95, THD <

15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED

driver efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (iii) 16-20 watts, Surge-2 KV Cat-lll

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate including value

of earth resistane of installation. (a) For Electrical Installation up to

440V in normal soil Length of pipe -1 Mtr Back filling compound -

Nos Bag of 15 Kg. 1.00 4591.46 Each

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF ELECTRIC ROOM

LOCATION : Near Bhesan Sarovar Dam, Savarkndla.

SCHEDULE - "B-6"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto all

lead and sretta 21.86 157.15 Cumt

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete

including cost of formwork in (a) Foundation and plinth 4.86 3095.24 Cumt

Providing & Laying controlled cement concrete M-200 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (A) Foundation footing base of column and

mass concrete. 5.00 4118.64 Cumt

Providing and laying controlled cement concrete M.200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost

of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M 3.16 9485.95 Cumt

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20mm nominal size) for R.C.C lintel

including finishing smooth with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement. 0.53 8518.14 Cumt

roviding and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4-

graded stone aggregates 20 mm nominal size) for reinforced concrete

Chhajjas not exceeding 10cm. thickness upto floor two level including

finishing the exposed surfaces with cement mortar 1:3 (1- cement, 3 Fine

sand) to give a smooth and even surface centering and formwork and

curing complete excluding cost of reinforcement. 0.28 6693.29 Cumt

Providing and laying controlled cement concrete M.200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost

of reinforcement for R.C.C. work in (B) COLUMNS:(ii) Having cross-

sectional area more than 0.08 Sq.M and upto 0.18 Sq.M 2.47 12577.32 Cumt

Providing and laying controlled cement concrete M.150 and exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforsement for R.C.Cwork in (iii) Slabs having more than

cm and upto 13 cm. thickness 2.53 7501.89 Cumt

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level. 1667.09 77.28 Kg

Filling available excavated earth (excluding rock) in trenches. Plinth sides

of foundations etc. in layers not exceeding 20 cm. in depth consolidating

each disposited layer by ramming and watering. 13.70 136.91 Cumt

Filling in foundation and plinth with murrum or selected soil in layers of

cm. thickness including watering, ramming and consolidating etc.

completed. 7.34 301.77 Cumt

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional 10.72 4245.09 Cumt

Providing 15 mm thick cement plaster in single coat on fair side

brick/concrete wall for interior plastering up to floor two level finished even

and smooth in with Floating coat of neat cement. (i) cement Mortar 1:3 (1

cement : 3 Sand) 48.80 195.42 Sqmt

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

(i) Cement mortar 1:3 (1-cement:3-sand) 16.32 145.65 Sqmt

20 MM thick sand faced cement plaster on walls upto height 10meters

above ground level consisting of 12 MM thick backing coat of Cement

Mortar 1:3 (1-Cement : 3-Sand) and 8MM thick finishing coat of Cement

Mortar 1:1 (1-Cement : 1-Sand) etc. complete 93.65 342.41 Sqmt

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 (1 cement 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for light shade 16.32 1264.40 Sqmt

Providing and laying marble stone slab flooring over 20mm (average)base

of cement mortar 1:6 (1-cement : 6 coarse sand) and jointed with gray

cement slurry including rubbing and polishing complete. (A) Marble slab

25mm thick 4.50 2231.50 Sqmt

Providing and laying broken China Mosaic Flooring for Terrace using

12mm to 20mm broken pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring mortar crème out upto

surface using white cement including rounding off junctions and extending

them up to 15cm. along the wall, clearing with water and oxalic acid etc. as

directed. 16.32 779.70 Sqmt

Providing and mixing Dr. Fixit water proofing material in cement concrete in

mix proportion recommended b the manufacturers. (0.18 Kg./1 Sqmt.) 2.94 49.15 Lit/Kg

Providing wood work in frames of Doors, windows cleare story windows

and othersimilar works wrought, framede and fixed in position. (A) Indian 10Cu.

Teak Wood 5.13 610.23 Dm

Provoding and fixing flush door shutters, solid core construction with frame

of first class hardwood with cross board and face veneer or plywood face

panels, including anodised alluminium butt hinges with necessary screws.

(B) Non-decorative type and block board core anodised alluminium butt

hinges in flush door shutters (2) 35 mm thick. 3.15 1829.73 Sqmt

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section

no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm

x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt),

vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size

40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt),

vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass/S.S. Mosquito Jali with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as per

details etc 3.96 1583.95 Sqmt

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws (A)

Plain Grill. 118.80 106.23 Kg

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing red lead. 3.96 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the

surface of all dirt, dust and other foreign matter. 3.96 92.20 Sqmt

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth. 65.13 82.85 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly brushing

the surface to remove all dirt, and remains of loose powdered materials.etc

complete 93.65 120.26 Sqmt

Point wiring for Light /Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected with

6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/ Wooden box, single mounting

base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose /H.D. Connector as directed. (a) with medium class

Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete. Cat. III 10.00 449.45 No.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium

die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95,

THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

,LED LED driver efficiency > 85% as per approved vender list make (fitting

required LM-79 & LM-80 Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.) (A) Tube

Light with integral driver (ii) 12-14 Watts, Surge-2 KV, IP-20,

conventional 4 feet Cat-lll 3.00 238.36 No.

Providing & erecting Approved make Ceiling Fan with double ball bearing

ISI mark with condenser A.C.230V 50c/s. 1400 mm. sweep complete,

canopy erected on existing hook or clamp with earthing [Make shall be

approved by Engineer in Charge] 1.00 1738.21 No.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF COMPOUND WALL

LOCATION : Near Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-7"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation up to 1.5 mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to all

lead and sretta 442.50 157.15 Cumt

Providing and laying cement concrete 1:3:6 (1-Cement: 3-coarse sand:

6-machine cut stone aggregates 40 mm nominal size) and curing

complete including cost of formwork in (A) Foundation and Plinth 44.30 3095.24 Cumt

Providing and laying cement concrete work 1:2:4 (1-Cement : 2-Coarse

sand : 4-graded stone aggregates 20mm nominal size) and curing

complete including cost of formwork but excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, Base or

columns and Mass concrete 92.60 4094.09 Cumt

Providing and laying ordinary cement concrete 1:2:4 (1-Cement 2-

coarse sand: 4-graded stone aggregates 20mm nominal size) and

finishing smooth with,curing etc. complete including the cost of formwork

but excluding the cost of reinforcement for R.C.C work in (B)

COLUMNS: (i) Having cross-sectional area 0.08 to 0.18 Sq.M 18.50 10469.20 Cumt

Providing and laying ordinary cement concrete 1:2:4 (1-Cement 2-coarse

sand: 4-graded stone aggregates 20mm nominal size) and finishing

smooth with,curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C work in (A) BEAMS :(ii)

Having cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse

sand : 6- crushed stone aggregates 20mm nominal size) and curing

complete including cost of formwork in (A) Wall Caps / Coping 17.80 4152.60 Cumt

Filling available excavated earth(excluding rock in trenches plinth, sides

of foundation etc,) in layor not exceeding 20cm. In depth consolidating

each depo sited layer by ramming and watering. 299.80 136.91 Cumt

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level 8048.40 77.28 Kg

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional 132.70 4245.09 Cumt

20mm thick sand faced cement plaster on walls up to height 10 mtrs.

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1

cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement :

sand) etc. 1860.90 342.41 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete 1860.90 120.26 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws. (A)

Plain grill 1200.00 106.23 Kg

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the

surface of all dirt, dust and other foreign matter. 40.00 92.20 Sqmt

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S.

Angle posts 40mm x 40 mm x6 mm and oil painting 3 coats fixed at

Mt,C/c. with five Horizontan lines and two diagonals of galvanised steel

barbed wire weighting 9.38 Kg. per 100 Metre, strained and fixed to

posts with G.I,staples including fixing the postsin ground with 0.5 M x

0.5.M x 0.5 M. block in C.C1:5:10 etc complete. 395.00 391.96 Rmt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF WBM WITH PAVING BLOCK FLOOR

LOCATION : Near Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-8"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a

base for road work including removing the excavated stuff and

depositing on the road side slope as directed upto all lead and sretta 714.60 109.41 Cumt

Crushed stone aggregate for machine cut quality (I) 40mm to 63mm

size all lead and lift 289.70 669.63 Cumt

Supplying of Stone Dust all lead and lift 23.20 363.60 Cumt

Spreading the stone aggregate for rolling and W.B.M. including filling

the interstices to required camber and gradient (excluding spreading of

Blindage) (ii) 40mm to 63mm size aggreagates 289.70 262.23 Cumt

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed. 23.20 154.84 Cumt

Rolling and consolidating water bound macadam (except laterite and

Kankar) including watering not exceeding 150mm thickness (Main layer

including binding materials ) including filling in depressions which occur

during the process. (A) With power roller 1931.30 15.87 Sqmt

Providing and laying cement concrete 1:4:8 (1-Cement: 4-coarse sand: 8-

Machine Cut stone aggregates 40mm nominal size) and curing

complete including cost of formwork in (A) Foundation and Plinth 193.10 2896.68 Cumt

Providing and fixing pre-cast Rubber Dye /steel Dye inter locking

concrete block 60mm thick with grade of concrete M-300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35mm Sand/stone dust/greet

layer for levelling and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete. 1797.10 706.93 Sqmt

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

mortar 1:1 including neat cement finishing, watering etc. complete. 510.00 24.28 Rmt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- PLANATION & GARDENING WORK

LOCATION : Near Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-9"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. Thickness including watering, ramming and consolidating etc.

complete. 1502.80 301.78 Cumt

Providing & laying Selection no. 1 doob grass turf with earth 50mm to

60mm thickness of existing ground prepared withproper level and

ramming with required tools wooden and than rolling the surface with

light roller make the surface smoothen and light watering the same

maintenance for 30 days or more till the grass establish properly,as per

direction of officer in charge 6500.90 88.38 Sqmt

Providing and Displaying Acalypha twisted well developed with fresh &

healthy 30 cm ht. as per direction of the officer-in-charge. 50.00 40.40 Each

Providing and stacking of Cycus cirsnallis well developed with fresh &

healthy 35 to 40 lush green leaves as per direction of the officer-in-

charge. 20.00 1919.00 Each

Providing and displaying of Lupine hybrid 20.00 424.20 Each

Jacaranda mimosifolia height 250-265 cm. in big poly bag size 25 cm 10.00 121.20 Each

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cmlength,30cm height and 15cm thick of M200 grade

concret as per approved design andincluding excavation for fixing in

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

etc complete. 635.00 402.55 Rmt

Providing erecting and fixing double coated ISI water tank of required

capacity each with all necessary fittings and connection etc. complete

on terrace 1000.00 3.95 Lit

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe (SCH- 40) for cold water including fittings as approved by engineer

in charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 340.00 72.65 Rmt

Providing and fixing Gun metal check or non-return fullway wheel valve.

(D) 32mm dia. 5.00 314.73 Each

Providing and fixing C.P. Angle stop cock 15 mm Heavy duty with cap 5.00 407.42 Each

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty non-pressure pipes I.S. Class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including

testing of joints complete. (B) 150mm 250.00 250.54 Rmt

Providing and fixing S.W. Gully trap with C.I. Grating brick masonry

chamber and water tight C.I. Cover with frame of 300mm x 300mm size

(inside) with standard weight. (i) Square mouth traps. (B) 150mm x

100mm size P or R type 10.00 1246.92 Ea.

Providing & supplying Bhogavo Sand Including all labour charges,

loading, unloading, transportations and all taxes etc complete as Per

instruction of engineer incharge. 32.00 1711.95 Cumt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- PROVIDING, INSTALLING, TESTING OF L.E.D. LIGHT WITH POLE

LOCATION : Near Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-10"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

wind speed with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to be

erected With Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (C) 5 Mtr. Long 70 mm Top

X 130 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with necessary G.I. J Bolts

.Approx Pole weight 46 kg 5.00 6874.06 No.

(G) 8 Mtr. Long 70 mm Top X 155 mm bottom dia, 3 mm thickness

with 260mmX260mmX16mm base plate, 4-M20 Bolts and 600mm

long with necessary G.I. J Bolts Approx Pole weight 84 kg 12.00 14010.72 Nos.

Providing and erecting Street Light pole bracket comprising main B Class

GI pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /80mm /

required size of pole top having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with 110 deg.with vertical plane &

suitable welded stays, reducer and with check nuts complete painted with

one coat of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms. [A] Single Arm Bracket 1.5 Mtr

[B] Double Arm Bracket 1.5 Mtr 12.00 1002.93 No.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10%, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt.LED

driver efficiency > 85% as per approved vender list make. (fittings

required LM-79 & LM-80 certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. Cat-lll (ii) above

to 60 Watts 5.00 4997.48 No.

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection. (vi)

above 160 to 200 watts 24.00 9647.52 No.

Providing & erecting approved make street light / wall mounting junction

box compression moulded from SMC (thermoset plastic) vertical sliding

cover having locking with square head stud loop in / loop out in built

terminal suitable for four core cable, waterproof of I.P. 54 protected with

clamp or bolt nut & earth bolt of following size. [A] 200mm x 127mm x

mm Size 17.00 356.53 No.

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark Cat.-III 17.00 112.11 No.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable

1.1 KV grade to be erected as directed of following size. (A) 2 core

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or floor of

following size of cables. (A-1) 4 core 4 Sq. mm 350.00 364.61 Mt.

Supplying and erecting B class Galvanized iron pipe having smooth

finished bore of the pipe on both ends erected nuts and bolts along the

pole / wall shaping the pipe as per site requirement. Pipe dia as following.

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

cable (A) 50 mm dia 345.00 62.62 Mt.

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc. hinged double door

internally supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle

of Two Nos. one is welded and other with nut and bolt for erecting

Bakelite sheet. Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be without joint with

water leakage proof & tested as per IP 55 test & followed by IS 2147 of

1962 (C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm thick

MS angle. 1.00 1884.66 No.

Supplying & erecting approved make Digital time switch having lithium

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A with,

floating contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as directed.

Pproviding and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

Supplying and erecting approved make suitable panel indicator LED type

lamp, lens cover, complete erected with necessary connections. 1.00 43.43 No.

Providing & erecting electronic overload relay with single phasing

preventer [ (L&T, Alstom, BCH,T.C., Siemens, C&S make). [a] for 30 to

Providing and erecting AC-3 duty 4 pole A.C. Coil with 2 NO & 2 NC aux

contacts complete with 415V/220V operating coil suitable for (L&T,

BCH,T.C., Siemens, C&S make) (a) for 25 / 32 A rating 1.00 1435.21 No.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

required depth for laying any size of cable or locating the fault all over

the run and back filling the same and making the surface as normal

ground. 340.00 74.74 Mt.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- PROVIDING & ERECTING VARIOUS TYPE OF CHILDREN PLAY EQUIPMENTS

LOCATION : Near Bhesan Sarovar dam, Savarkundla.

SCHEDULE - "B-11"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

CHILDREN PLAY EQUIPMENTS

Providing & Erecting various type of following children play ground

equipment as per standard manufacture and as per direction by

municipality Incl. cost of required size foundation with cement concrete

1:2:4 (1: cement: 2 coarse sand: 4-20mm nominal size crushed stone

aggregate) with curing etc. complete asper directed by Engineer-in-

charges. The work included all type of labour, Installation charges,

Material charges, transportation charges. 2 SLIDE UNIT (5 X 15 X

SPIRAL SLIDE (08 X 07 X 08FT) 1.00 84335.00 Ea

2 SEATER U TYPE SWING (08 X 04 X 08 FT) 1.00 36865.00 Ea

3 SEATER U TYPE SWING (10 X 04 X 08FT) 1.00 47975.00 Ea

08 SEATER MARY GO ROUND (5FT DIA) 1.00 47975.00 Ea

Providing & Fixing Cast Iron powder coating garden bench capicity

seater and finishing & fixing as per instruction etc. complete.

Specification: 3 Seater Seating Capacity, decorative legs design,

powder coating finish, with back & arm rest, 150 kg weight bearing

capacity. Material: Side frame cast iron, Mild steel pipe 14 gauge seat

& back rest material. Dimension: 654mm Total Height, 327mm Seat

Height, 520mm width, 1501mm Seat Wide, 1 Year warranty period with

including all types of tax, loading, unloading, transportation, etc. 10.00 8080.00 Ea

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF RCC UNDER GROUND SUMP 25,000 LITR.

LOCATION : Near Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-12"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Preparing structural design of RCC Under Ground / Partially under

ground / above high ground level Reservoir of required capacity as per

relevant I.S. standards and constructing the same, including excavation

in all types of soil strata (including rock) including shoring strutting if

required, for loose soil / to protect from collapse, casting 100 mm thick

P.C.C. levelling course in M-15, Refilling the pit with proper soil and

disposing of the surplus stuff at all lead. Including cement plaster in CM

1:2 with approved water proofing compound to all over inside container

(i.e. walls, base, top slab/dome bottom etc. all). Including all types of

labour and material charges of lowering, laying, erecting / hosting and

jointing of pipe assembly to inlet, outlet overflow, washout and bye pass

arrangement as per hydraulic design.

Providing and fixing accessories, CI Manhole frame and cover, water

level indicator, adequate cowl type ventilators or lantern type ventilator

with stainless steel jail. RCC chambers for valves. Providing and

applying three coats of cement paint / snowcem to the out side face of

structure. It also includes satisfactory water tightness test as per

relevant I.S. code and painting name of scheme and capacity on the

tank as per direction of engineer in charge.

List of Indian Standards for Design of GSR / SUMP :- The structural

design of GSR shall be in accordance with provisions relevant I.S

standards (1) I.S. 3370 part I & II 2009 or Its latest revision (1.1) I.S.

3370 part III & IV 1965 or Its latest revision (2) I.S. 456 – 2000 or Its

latest revision. (3) I.S. 1893 – 2000 – 1984 or Its latest revision. (4) I.S.

875, Part – 1 to 3, 1987 or Its latest revision.

General Specifications:- (1) Water depth in container shall be

adopted as per data of tender. Capacity shall be calculated excluding

free board of the reservoir. If water depth is not specified, the suitable

water depth / acceptable to field engineer in accordance with hydraulic

requirement (2) Shape of schoanltl abine eard (oinp tpeladn f)o rs

pceacpiaficeidty .by in data shall be adopted in absence circular shape

shall be adopted. (3) Size shall be fixed as per availability of space

(land area) at site / acceptable engineer in charge. (4) Effect of

overlapping of pressure bulbs on soil due near by structure and

proposed sump should be considered.

(5) Care shall be taken that no damage should occur to nearby existing

structure. Compensation shall be paid for the same by agency. (6) The

minimum concrete grade for RCC shall be M-30. (7) HYSD Fe 415 /

500 grade reinforcing bars confirming to I.S. 1786 / 1139 shall be

considered in design. CRS / TMT bars shall be provided. In saline

atmosphere corrosion resistance stainless steel / HCR rebar shall be

provided. Any other steel can be used with approval of C.E./ in situation

of non availability in market without extra cost.

(8) Minimum size (or thickness) of various components shall be

provided as per tender criteria / specifications in absence as per I.S./

Std. practice of G.W.S.S.B. Minimum dimensions specified for various

components in tender data / specifications shall be provided without

fail. (9) The safe bearing capacity (SBC) shall be referred from SBC

test report. In absence of report it shall be referred from data sheet. If

poor soil is found / water table is met with during excavation SBC shall

be scientifically ascertained and design shall be revise. No extra shall

be paid for increase in quantity. (10) DI pipes and special shall only be

used if type is not specified in tender. (11) The rate shall include cost of

dewatering during excavation making all arrangement when water table

meets within depth. (12) The structure shall be designed properly to

resist uplift due to ground water table specified in data or actual ground

water table meets with during excavation. If GWT / Uplift is mentioned

in tender and during excavation it dose not meet 7.5% rate shall be

(13) SS pipes railing shall be provided over sump perifery when sump

height is ≥ 1.5 meter above ground level. (14.a) RCC staircase/RCC

Steps should be provided from GL to sump top slab based on the

height of the GSR above/below the ground. (14.b) RCC Staircase with

SS railing to be provided inside reservoir container. BB Masonry

staircabin to be provided to cover the same with MS safety door having

locking arrangement. (15) Appearance of structure should be

aesthetically good looking acceptable to authority. (16) Any change in

size, shape, depth below GL, height above GL, water depth, F.B., size

of member etc can be permitted in exceptional case due to site

condition or hydraulic design requirement by C.E. No extra shall be paid

(17) Any change in data, dimensions, shape, water depth, reduction in

size if permitted by competent authority and if it reduces quantity then

payment shall be reduced prorate. (18) When capacity of GSR / Sump

is > 20 lakh litres two or suitable compartments acceptable to executive

engineer shall be designed and provided. (19) Agency shall engage

qualified (at least graduate) consulting engineer for designing the

structure and he / she shall visit the site for guidance of work. (20) 75%

part rate shall be payable for concrete, reinforcement and plastering

items of container until satisfactory hydraulic testing for water tightness

is performed as per tender condition. Till the work shall be treated as

Above conditions / general specifications Sr. No. 1 to 20 are part and

parcel of tender (contact) and prevail over other provisions in tender.

As above rectangular sump without water table (Sub soil water level

below foundation) Cost of 25,000 lit. capacity 25000.00 6.50 Per Ltr

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

NAME OF WORK : MULTIPURPOSE HALL PROJECT O & M (5-YEAR) FOR NEAR BHESAN SAROVAR

DAM, AT, SAVARKUNDLA, DIST. : AMRELI.

Operation & Maintenance for 5 Years

Sr. No. Description Qty. Unit Rate Amount

Operation and maintenance of Near Bhesan Sarovar Dam, At,

Savarkundla, Dist.: Amreli. Multipurpose Hall Project with

Maintenance all Materials and labour work as per savarkundla

Nagarpalika City including all taxes, insurance of whole

property and staff will be borne by contractor. The work carried

1.1 out as per condition of contract and as directed by Engineer-in-

charge of savarkundla Municipality. all components of

Multipurpose Hall Area: 10200.00 Sqmt. Civil works, Garden

Electric work (Schedule No. B-1 to 12)

O&M period for 1st Year

(2 Gardener/cleaning staff/Mali + 1-Watchman (L009) 12 Month 46628.75

O&M period for 2st Year

1.2 (2 Gardener/cleaning staff/Mali + 1-Watchman (L009)

O&M period for 3st Year

(2 Gardener/cleaning staff/Mali + 1-Watchman (L009) 12 Month 51408.20

O&M period for 4st Year

(2 Gardener/cleaning staff/Mali + 1-Watchman (L009) 12 Month 53978.61

O&M period for 5st Year

(2 Gardener/cleaning staff/Mali + 1-Watchman (L009) 12 Month 56677.54

Stamp with Signature of Contractor

Consl. Engineer Municipal Engineer

"DESIGN POINT" Savarkundla Nagarpalika

Amreli Savarkundla

Chief Officer President

Savarkundla Nagarpalika Savarkundla Nagarpalika

Savarkundla Savarkundla

(1) O&M cost above shall be inclusive cost of supply of manpower, repairs and maintenance of all units, spares,

consumables, services of any expert as required and any other work required for smooth operation and

maintenance of entire facility.

(2) Water & Power shall be supplied by employer.

Sche 13-O&M | Page

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF MAIN GATE WITH WATCHMAN ROOM

LOCATION : Near Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-14"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking

of useful materials and disposing off the excavated stuff upto all lead and

sretta 27.50 268.92 Cumt

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size) and curing complete

including cost of formwork in (a) Foundation and plinth 6.30 3095.24 Cumt

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork but excluding reinforcement for reinforced

concrete work in (A) Foundations, footings, Base of columns and Mass

concrete. 3.70 4118.64 Cumt

Filling available excavated earth,(Ecluding rock in trenches plinth, sides of

foundation etc.)in layer not exceeding 20 cm, in depth consolidating each

depo sited layer by ramming and watering. 20.70 136.91 Cumt

Filling in plinth with sand under floors including watering ramming,

consoildating and dressing etc. complete 3.90 481.80 Cumt

Providing and laying controlled cement concrete M.200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (A) BEAMS (ii) Having cross-sectional

area more than 0.08Sq.M and upto 0.12 Sq.M 4.80 9485.95 Cumt

Providing and laying controlled cement concrete M.200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (B) COLUMNS:(ii) Having cross-sectional

area more than 0.08 Sq.M and upto 0.18 Sq.M 3.40 12577.32 Cumt

Providing and laying ordinary cement concrete M-20 exposed work with

curing etc. complete including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in (iii) Slabs having more than 10 cm and

upto 13 cm. thickness 1.70 7921.43 Cumt

Providing and laying ordinary cement concrete M-200 for R.C.C lintel

including finishing smooth with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement. 0.60 8985.97 Cumt

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level 1893.30 77.28 Kg

Brick work using common burnt clay building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand) (B) Conventional 12.80 4245.09 Cumt

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) 51.80 195.42 Sqmt

20mm thick sand faced cement plaster on walls up to height 10 mtrs. above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement :

sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand) etc.

complete with interior plastering above floor two level for every additional

storey hight (2) Two coat plaster 110.50 342.41 Sqmt

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for light shade 12.50 1264.40 Sqmt

Providing and laying marble stone slab flooring over 20mm (average)base of

cement mortar 1:6 (1-cement : 6 coarse sand) and jointed with gray cement

slurry including rubbing and polishing complete. (A) Marble slab 25mm thick 5.60 2231.50 Sqmt

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x

mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white

cement slurry. 28.60 1488.23 Sqmt

Providing and laying broken chine mosaic flooring for terrace using 12 mm to

20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

using white cement including rounding off junctions and extending them upto

15 cm along the wall,clearing with water and oxalic acid etc. as directed. 11.10 779.70 Sqmt

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory

windows including Indian teak wood frames 12 cm x 7 cm. size including

anodized alluminium fixtures and fastenings including primer coat of

approved quality and two coats of oil painting etc, complete. (ii) Fully 1.90 5533.67 Sqmt

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section

no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x

31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical

member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@

Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size

mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt),

vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949

@ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc 3.50 1583.95 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of windows

etc. with M.S. flats at required spacing and frame all-round square or round

bars with round headed bolts and nuts or by screws. (A) Plain grill 926.30 106.23 Kg

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers and

sand paper with ready mixed priming paint brushing red lead. 46.40 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface of all dirt,

dust and other foreign matter. 46.40 92.20 Sqmt

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on wall surfaces to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and

sand papered smooth. 51.80 82.85 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered materials.etc

complete 110.50 120.26 Sqmt

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of

required capacity each with all necessary fittings and connection etc.

complete on terrace. 500.00 3.95 Lit

Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of

the size 110 mm diametre x 149 mm length x 145 mm heigh at every

mm center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials. 10.00 876.90 Rmt

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe

(SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials. 20.00 72.65 Rmt

Providing and fixing Gun metal check or non-return fullway wheel valve.(C)

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia. 2.00 186.83 No

Providing and fixing cast iron (Spun) Nahni trap of the following nominal

diameter of self cleaning design with C.I. screaed down or higned grating

including cost of cutting and making good the walls and floor 100mm inlet

and 50mm outlet. (C) 100mm dia. 1.00 636.38 No

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length. 4.00 101.90 No

Constructing a cooking platform 60 cm. width and 70 cm high resting on

B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (i) Fixing or precast

R.C.C.1:2:4) 8 cm. thick slab with marble chips set in C.M. (1:6) (6mm thick

terrazo) with plastering on exposed faces walls in C.M. (1:4) etc complete. 3.66 2694.17 Rmt

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected with

6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III 10.00 485.81 Pt.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat. III 1.00 674.68 No

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having

3 blades aluminium body and blade sets having ornamental design shanks

canopy erected with earthing. [Make shall be approved by Engineer in

Charge] 1.00 2311.89 No

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V.& corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt, LED driver efficiency > 85% as per

approved vender list make (fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips complete.IP20 (iii)

16-20 watts, Surge-2 KV Cat-lll 6.00 589.84 No

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (7) Blank Plate Single,

Cat.III 2.00 25.25 No

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable

to operate on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box.confirming to IS 8828/1996 with ISI Mark, Cat.III

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF WBM WITH PAVEMENT TILES MAIN ROAD

LOCATION : At. Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-15"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. Thickness including watering, ramming and consolidating etc.

complete. 1220.00 301.77 Cumt

Box cutting the road surface to proper slope and camber for making a

base for road work including removing the excavated stuff and depositing

on the road side slope as directed upto all lead and sretta 150.00 109.41 Cumt

Crushed stone aggregate for machine cut quality (I) 40mm to 63mm size

all lead and lift 112.50 669.63 Cumt

Supplying of Stone Dust all lead and lift 9.00 363.60 Cumt

Spreading the stone aggregate for rolling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

Blindage) (ii) 40mm to 63mm size aggreagates 112.50 262.23 Cumt

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed. 9.00 154.84 Cumt

Rolling and consolidating water bound macadam (except laterite and

Kankar) including watering not exceeding 150mm thickness (Main layer

including binding materials ) including filling in depressions which occur

during the process. (A) With power roller 750.00 15.87 Sqmt

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand :

8- Machine Cut stone aggregates 40 mm nominal size) and curing

complete including cost of formwork in (A) Foundation and Plinth 75.00 2896.68 Cumt

Providing and fixing of 300*300*25mm Reflective Floor Tiles grade of

concrete M-300 Rubber Mold / vibrated mechanically and as per

Quatation including 80mm Dust layer for levelling and filling the joint with

sand in proper line and level as per In Charge Engineer etc. Complete.

Providing and casting in situ controlled cement concrete M-150 for

Kerb/kerb blocks including formwork curing and finishing, complete. 15.90 4381.65 Cumt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF BOX CULVERT

LOCATION : At. Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-16"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

all lead and sretta 42.90 157.15 Cumt

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand

: 6-machine cut stone aggregates 40 mmnominal size) and curing

complete including cost of formwork in (A) Foundation and Plinth 14.70 3095.24 Cumt

Providing and Casting in situ controlled Cement Concrete M-200 for

R.C.C. Raft and cutt-off walls including necessary shuttering laying,

vibrating, ramming and curing complete. 54.20 4620.44 Cumt

Providing and casting in situ ordinary Cement concrete M-200 for

R.C.C. solid slab including centering, scaffolding curing and finishing

complete. 17.20 5326.93 Cumt

Providing and casting in situ ordinary cement concrete M-200 for

average 75 mm thick wearing coat laid as directed including tamping

,vibrating, finishing, curing and filling in joints with bitumen complete 3.70 4364.80 Cumt

Providing and placing in position FE 500/500D bar reinforcement for

following items including cutting bending hooking and tying complete as

per detailed drawing.For well :- curb, staining, cap and RCC Raft. 4.20 73858.69 Tonne

Providing and fixing post and pipe railing as per detailes drawing

including 3 coats of painting to steel works complete. 37.00 1214.22 Rmt

Providing and Laying weep hole in Aburtment and return by using A.C.

pipe of 100mm including in proper grede and jointing in cement mortar

1:1 and curing complete. 8.00 56.12 No

Providing and laying rubble for appron (each stone weighting not less

than 40Kg.) including and packing and filing in the interestices with

quarry-spalls. 11.70 1083.81 Cumt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF RETAINING WALL

LOCATION : At Bhesan Sarovar dam, savarkundla.

SCHEDULE - "B-17"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff

upto all lead and sretta 1372.50 268.92 Cumt

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto all lead and sretta 252.90 287.21 Cumt

Providing and laying cement concrete 1:3:6 (1-Cement: 3-coarse

sand: 6- machine cut stone aggregates 40 mmnominal size) and

curing complete including cost of formwork in (A) Foundation and

Plinth 137.30 3095.24 Cumt

Providing and casting in situ controlled cement concrete M-200 for

R.C.C. return as per drawings including centering shuttering,

scaffolding where necessary, laying vibrating, curing and finishing

complete. (A) Height from 0.0 to 5.0 M. (1) Piers (2) Abutment (3)

RCC return 1155.20 5227.35 Cumt

Providing and placing in position FE 500/500D bar reinforcement for

following items including cutting bending hooking and tying complete

as per detailed drawing.For well :- curb, staining, cap and RCC Raft.

Providing and Laying weep hole in Aburtment and return by using

A.C. pipe of 100mm including in proper grede and jointing in cement

mortar 1:1 and curing complete. 600.00 56.12 No

Filling available excavated earth(excluding rock in trenches plinth,

sides of foundation etc,) in layor not exceeding 20cm. In depth

consolidating each depo sited layer by ramming and watering. 476.30 136.91 Cumt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- PROVIDING & ERECTING DECORATIVE LED STREET LIGHT WITH POLE

LOCATION : At Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-18"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting Decorative Pole GI Pole 2.60mt. Hi.,With Twin

Led Light with arm Bracket deataild as per Quatation, Instruction as per

In Charfe Engineer 40.00 17978.00 No.

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS 8828/1996

with ISI Mark Cat.III 40.00 112.11 No.

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured copper cable

1.1 KV grade to be erected as directed of following size. (E) 3 core

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables,

(A) 4 core 16 Sq. mm 800.00 153.52 Rmt

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

cable (A) 50mm dia. 770.00 62.62 Rmt

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc. hinged double door

internally supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle

of Two Nos. one is welded and other with nut and bolt for erecting

Bakelite sheet. Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be without joint with

water leakage proof & tested as per IP 55 test & followed by IS 2147 of

1962 (C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge

MS Sheet with angle iron legs 45 cm long made from 35 X 35 X

mm thick MS angle. 1.00 1884.66 No.

Supplying & erecting approved make Digital time switch having lithium

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as directed

providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III 1.00 6173.12 No.

Providing & erecting electronic overload relay with single phasing

preventer [ (L&T, Alstom, BCH,T.C., Siemens, C&S make). (Electric

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO &

NC aux contacts complete with 415V/220V operating coil suitable for

(L&T, BCH,T.C., Siemens, C&S make). (a) for 25 / 32 A rating 1.00 3253.21 No.

Providing and erecting Pipe type earthing having 150 cms.long and

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

For using salt and charcoal / coke as required for pipe type earthing. 40.00 171.70 No.

Making trench in soft soil of suitable width of 90 cm deep for laying cable

or locating the fault all over the run and back filling the same and

making the surface as normal ground. 750.00 55.55 Rmt

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover (A)

(approved make OEM has to submit test certificate including value of

earth resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane mentioned

in test Certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- <1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound:- Earthing compound should be

capable to retain moisture for long time Necessary test report must be

submitted by Agency. [A] For electrical installation up to 440 V

Length of Pipe - 1 Mtr Back filling compound - 1 Nos. of Bag of

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high

upper ground level with necessary curing and finishing in approved

manner. ( for 4 & 6 mtr pole) 40.00 809.01 No.

Supply, Installation, Testing & Commissioning of following size of Grid

Tied Solar Power Plant with Solar Panels (ALMM approved): Frame

Material : Anodized Aluminum alloy Frame With Twin Wall Profile, Front

Cover : High Transmission Low-Iron Tempered Glass (AR Coated), High

efficency and positive power tolerance Pmax: 0/+5, Module Efficiency

should be approx. 18%-21%, Normal operating temperature 45'C,

Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed

with Bypass diodes, 100% Electroluminescence test to ensure error free

Modules, Thep. temp. co-efficient of the PV module shall equal or better

than -0.45%/degree C. Solar PV modules of minimum fill factor 75% to

be used. Unit Production:- 4 to 5 Unit /kw /day (Actual) (1Year Avg) With

10 year Product warranty and 25 year Linear Power Warranty., Solar

Inverter: MPPT Range: 80-1000 V, Max efficiency: 97.5% - 98.9%, O/p

Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor:

~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Anti-

islanding Protection:

Integrated, Input Reverse Polarity Protection Integrated, Insulation

Resistor Detection Integrated, Residual Current Monitoring Unit

Integrated, Output Over Current Protection Integrated, Output Short

Circuit Protection Integrated, Output Over Voltage Protection Integrated,

Protection Degree: IP65, User Interface LCD & APP,Datalogger &

Communication: GPRS / Wi-Fi, Module Mounting Structure: Seamless

Box Pipe / 'C' Channel of suitable size for rooftop solar installations with

good stability agaist wind & weight load., Hot Dipped Galvanized steel

coils. suitable arrangement for base plate for foundation, solar panel

mounting, the structure should be suitable for carry the load of solar

panel,wiring, sprinkler system etc. with necessary foundation work/wall

mount, j bolt, anchor fastner etc. the nut bolt used for installtion of

stucture should be (SS 304) quality. and Balane of System with

necessary Swithgears (Suitabel size and protection of ACDB & DCDB),

inter connecting wiring, earthing system, lightining arrester system, all

liasoning work with various gov. dipartment like state nodal agency,

DISCOM & CEIG is included in agency scope (Excluding GEDA

Application fees, Solar connectivity Charges, Meter connectivity

Charges, Meter testing Charges.) (C) Grid Tied Solar Power

System: 11 - 25 kW (3 - phase)

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate including

value of earth resistane of installation.(a) For Electrical Installation up

to 440V in normal soil Length of pipe - 1 Mtr Back filling compound -

1 Nos Bag of 15 Kg.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10%, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt.LED driver efficiency > 85 % as per approved

vender list make. (fittings required LM-79 & LM-80 certificates) (NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply with over-voltage

protection. (vi) above 160 to 200 watts Cat-lll 4.00 9108.18 Each

Supplying, erecting, testing, commissioning approved make M.S.

Polygonal High Mast Pole having following general Specification. (a)

Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 &

Hot deep galvanized minimum 65/86 micron (as per IS 2629 /1985)

Lantern carriage with ring and rubber lines for erection of luminaries of

suitable site. (b) Maximum telescopic section not more than four (c)

Double drum gear pipe motorized winch with 6mm dia S.S. Rod (For

mtr and above size) (d) Approved make L.E.D. aviation light = 1 No.

Lightening arrestor = 1 No. with necessary wiring of 2.5 sq.mm 5 core

ISI copper cable Unarmoured. (e) Bottom most section suitable for

mounting reversible motor and switchgears having door not more than

1400mm x 300mm with waterproof gasket & hinges & locking

arrangement. (f) Pole structure comprises suitable size of reversible

motor, cable and necessary switchgears with control panel.

(g) bottom section shall have suitable size of thickness supports ribs

foundation bolts nuts etc. (h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including testing &

commissioning of the entire structure for following size of High Mast

poles [1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm,

No. of Sec. No. - 1, Bottom Thickness - 3 mm, Size of Base Plate -

Dia 520 mm x 20 mm thick, Foundation Bolt Size M24 x 850 mm,

Qty - 6 Nos., Suitable for mounting Fitting of Light - 6 Nos. 1.00 141616.14 No.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10%, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt LED driver efficiency > 85 % as per approved vendder

list make (fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

shown.) (B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage protection. (vii)

above 200 to 250 watts Cat-lll 6.00 10263.62 No.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or floor

of following size of cables. (A) 4 core 4 Sq. mm 25.00 364.61 Rmt

Providing & Erecting various type of Decorative Gardining LED Solat

Lemp etc. complete asper directed by Engineer-in-charges. The work

included all type of labour, Installation charges, Material charges,

transportation charges. SWPL-01WRGB 5.00 1363.50 Ea.

SDL-HYD-PK, Solar Decoration Lamp 15.00 949.40 Ea.

SDL-HYD-BL, Solar Decoration Lamp 15.00 949.40 Ea.

SDL-HYD-LR, Solar Decoration Lamp 15.00 949.40 Ea.

SDL-FW, Solar Decoration Lamp 10.00 1393.80 Ea.

SDL-03, Solar Decoration Lamp (SET OF 3) 10.00 1464.50 Ea.

SDL-CB-06, Solar Decoration Lamp 20.00 696.90 Ea.

SDL-FF-06, Solar Decoration Lamp 20.00 696.90 Ea.

SDL-HB-24, Solar Decoration Lamp 10.00 2615.90 Ea.

SDL-SF-01, Solar Decoration Lamp 15.00 797.90 Ea.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF STATUE FOUNDATION WITH CONNECTING BRIDGE

LOCATION : At Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-19"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Dewatering In all sorts of soil and soft murrum, hard Murrum and

boulders, Soft Rock, Hard Rock, upto 1.5 mt. depth from G. L. 484.30 19.55 Cumt

Dewatering Extra for dewatering in all sorts of strata’s, for each 1.5 mt.

or part thereof beyond 1.5 mt. depth. 484.30 11.50 Cumt

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

all lead and sretta 484.30 157.15 Cumt

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto all lead and sretta 484.30 170.49 Cumt

Excavation for foundation for depth from 3.0 m to 5.0 m including

sorting out and stacking of useful materials and disposing of the

excavated stuff upto all lead and sretta 20.00 300.02 Cumt

Providing and laying rubble for appron (each stone weighting not less

than 40Kg.) including and packing and filing in the interestices with

quarry-spalls. 98.20 1083.81 Cumt

Crushed stone aggregate for machine cut quality (I) 40mm to 63mm

size all lead ana lift. 51.00 669.63 Cumt

Supplying of Stone Dust all lead and lift 4.10 363.60 Cumt

Spreading the stone aggregate for rolling and W.B.M. including filling

the interstices to required camber and gradient (excluding spreading

of Blindage) (ii) 40mm to 63mm size aggreagates 51.00 262.23 Cumt

Spreading blindage or road crust filling the gaps in metal and leveling

to camber and gradient as directed. 4.10 154.84 Cumt

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand

: 6 Machine cut stone aggregate 40mm nominal size) and curing

complete including cost of formwork in (a) Foundation and plinth

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork but excluding reinforcement

for reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete. 162.60 4393.39 Cumt

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork but excluding reinforcement

for reinforced concrete work in (B) Walls, from top of foundation

level upto floor two level. 326.40 4703.60 Cumt

Providing formwork of ordinary timber planking so as to give a rough

finish including centering shuttering strutting and propping etc. height

of propping and centering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ reinforced

concrete and plain concrete work in. (C) Vertical surface such as

walls (any thickness) partitions and the like including attached

buttresses & string course & the like. 1748.20 243.86 Sqmt

Providing and laying controlled cement concrete M.250 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (A) BEAMS :(iii) Having

cross-sectional area more than 0.12Sq.M and upto 0.18 Sq.M

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (B) COLUMNS:(ii)

Having cross-sectional area more than 0.12 Sq.M and upto

Filling available excavated earth,(Ecluding rock in trenches plinth,

sides of foundation etc.)in layer not exceeding 20 cm, in depth

consolidating each depo sited layer by ramming and watering. 217.40 136.91 Cumt

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. Thickness including watering, ramming and consolidating etc.

complete. 1045.30 301.77 Cumt

Providing and casting in situ controlled cement concrete M-250 for

R.C.C. work in superstructure including centering, shuttering

scaffolding, ramming, vibrating curing and finishing complete. (A) T-

Beam and Deck slab type of superstructure (I) Deck slab 18.40 5901.30 Cumt

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto floor

two level 33955.80 77.28 Kg

Providing and laying coloured glazed tiles of the size 300 mm x

mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry. 19.00 1488.23 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws.

(A) Plain grill 3340.00 106.23 Kg

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning, oil,grease,

dirt and other foreign matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming paint brushing red

lead. 167.00 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter. 167.00 92.20 Sqmt

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on wall surfaces to give an even shade including

throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth. 276.00 82.85 Sqmt

Providing and fixing pre-cast Cobble Stone concrete block 60mm

thick with grade of concrete M-300 pnumatic compressed /vibrated

mechanically and as per approved design Confirming to IS 15658:

2006 including 50mm Dust layer for levelling and filling the joint with

sand in proper line and level as per guidlines of IRC : SP 63-2018 etc.

Complete. 304.40 961.52 Sqmt

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm.

length. 10.00 101.90 No

Providing and Fixing Statue (Shiv Mahadev) 20feet Hight with all

labour, materials and transportation charges loading, unloading,

irrection, all taxes etc. comp. as per Direction by Engineer-in-charge.

Detail As Per Attached Specification. 1.00 1111000.00 Rmt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF WBM WITH COBBLE STONE PATHWAY, KERBING & SEFTY

LOCATION : Near Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-20"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. Thickness including watering, ramming and consolidating etc.

complete. 5770.90 301.77 Cumt

Providing and laying rubble for appron (each stone weighting not less

than 40Kg.) including and packing and filing in the interestices with quarry-

spalls. 938.80 1083.81 Cumt

Crushed stone aggregate for machine cut quality (I) 40mm to 63mm size

all lead ana lift. 234.60 669.63 Cumt

Supplying of Stone Dust all lead and lift 18.80 363.60 Cumt

Spreading the stone aggregate for rolling and W.B.M. including filling

the interstices to required camber and gradient (excluding spreading of

Blindage) (ii) 40mm to 63mm size aggreagates 234.60 262.23 Cumt

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed. 18.80 154.84 Cumt

Rolling and consolidating water bound macadam (except laterite and

Kankar) including watering not exceeding 150mm thickness (Main layer

including binding materials ) including filling in depressions which occur

during the process. (A) With power roller 1058.00 15.87 Sqmt

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand :

8- Machine Cut stone aggregates 40 mm nominal size) and curing

complete including cost of formwork in (A) Foundation and Plinth 342.70 2896.68 Cumt

Providing and fixing Cobble Stone block 100 X 100 X 60mm thick with

grade of concrete M-200 pnumatic compressed /vibrated mechanically

and as per approved design including 50mm Dust layer for levelling and

filling the joint with sand in proper line and level as per In Charge Ingineer

etc. Complete. 2345.50 961.52 Sqmt

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

mortar 1:1 including neat cement finishing, watering etc. complete. 960.00 24.28 Rmt

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M 44.40 9485.95 Cumt

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M-200 grade

concret as per approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

complete. 1019.00 402.54 Rmt

Providing & supplying Bhogavo Sand Including all labour charges,

loading, unloading, transportations and all taxes etc complete as Per

instruction of engineer incharge. 125.00 1711.95 Cumt

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional 89.60 4245.09 Cumt

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete. 679.40 342.41 Sqmt

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand)

and jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete. (A) 25mm

thick 29.50 1019.39 Sqmt

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse

sand : 6- crushed stone aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Wall Caps / Coping 4.00 4152.60 Cumt

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level 5528.00 77.28 Kg

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete 679.40 120.26 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws. (A)

Plain grill 6210.00 106.23 Kg

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the

surface of all dirt, dust and other foreign matter. 310.50 92.20 Sqmt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2025-26

NAME OF WORK :- PLANATION & GARDENING WORK

LOCATION : At Bhesan Sarovar Dam, Savarkundla.

SCHEDULE - "B-21"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Preparation of beds for hedging and shrubbery by excavating 60 cm

deep and trenching the excavated base to a further depth of 30 cm,

refilling the excavated earth after breaking clods and mixing with sludge

or manure in the ratio of 8:1 (8 parts of stacked volume of earth after

reduction by 20% : one part of stacked volume of sludge or manure

after reduction by 8%), flooding with water, filling with earth if necessary,

watering and finally fine dressing, leveling etc. including stacking and

disposal of materials declared unserviceable and surplus earth by

spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m

complete (cost of sludge, manure or extra earth to be paid for

separately) 871.00 225.08 Cumt

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to

60mm thickness of existing ground prepared with proper level and

ramming with tools wooden (Dhurmos) and than rolling the surface with

light roller make the surface smoothen and light waterning with sprinkler

and maintenance for 30 days or more till the grass establish properly,

as per direction of officer-in-charge. 2755.00 216.54 Sqmt

Providing and Displaying Acalypha twisted well developed with fresh &

healthy 30 cm ht. as per direction of the officer-in-charge. 1500.00 40.40 Each

Providing and stacking of Cycus cirsnallis well developed with fresh &

healthy 35 to 40 lush green leaves as per direction of the officer-in-

charge. 100.00 1919.00 Each

Providing and displaying of Croton Golden specimen having ht. 90 cm

to 1.05 cm with 5 to 6 branches, well developed, fresh and healthy

foliage in 30 cm size of Earthen pot/Plastic pot as per direction of the

officer-in-charge. 100.00 169.68 Each

Providing and displaying of Cineraria dwarf hybrid 800.00 707.00 Each

Providing and displaying of Lupine hybrid 900.00 424.20 Each

Travelers palm well developed with fresh & healthy leaves foliage 210 to

240 cm ht specimen plant in 200 cm Cement Pot 40.00 4797.50 Each

Tabebuia sp. height 25.-265 cm. in big polybag size 25 cm 60.00 171.70 Each

Jacaranda mimosifolia height 250-265 cm. in big poly bag size 25 cm 60.00 121.20 Each

Azadirachta indicia ( Neem ) height 120-130cm in big polybag size

Providing erecting and fixing double coated ISI water tank of required

capacity each with all necessary fittings and connection etc. complete

on terrace 4000.00 3.95 Lit

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe (SCH- 40) for cold water including fittings as approved by engineer

in charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 15mm dia.

Providing and supplying in standard length ISI mark rigid unplasticised

PVC pipe suitable for potable water with ringfit joint including cost of ring