Functional Augmentation of Meeting Hall Block Pattan Baramulla, under CD PYT, FY 2025-26

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: Rate for a lead upto 1 meter from cutting Edge: All kinds of soil :

Providing/Laying Stone soling hand packed on level in foundation trenches incl all carraiges of material.

Providing and laying in position plain cement concrete 1:4:8 mix ratio M 7.5 using 20 mm nominal size agg excluding cost of shuttering i/c curing( all works upto lintel level).

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 Cement: 6 Coarse Sand).

Centering and Shuttering I/c Strutting, Propping etc & removal of formwork for roof.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings,balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcment for R.C.C. work incl. straightening, cutting, bending, placing in position & binding all complete.

Dry random rubble masonry with hard stone in foundation & plinth using Quarry stones

12 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 mix

P/L 40mm thick flooring with 20 mm nominal size stone aggregate.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing PPR pipes complete with fittings and clamps including cutting chases and making good the walls etc, 16 mm dia.

Providing and fixing ball valve (brass of approved quality complete: 20mm nominal bore)

Providing and fixing Jaquar/equivalent make vitreous china washbasin of approved design and size (minimum 550 mm), conforming to IS:2556, with single tap hole for pillar cock, including Jaquar make CP brass pillar cock, CP waste coupling, bottle trap, angle valves, and flexible inlet pipes; fixed on wall with CI/MS brackets or pedestal (as per design), including cutting and making good the walls and floors, testing for leakages, and complete in all respects as per directions of Engineer-in-Charge.

P/F Door Tee 100 mm dia PVC of Approved make type B

P/F Plain Bend 100 mm dia PVC of Approved make type B

P/F 100 mm dia PVC Collar of Approved make type B

P/F 75 mm dia PVC Collar of Approved make type B

P/F Soil Waste Disposal Pipes 100 mm complete job

P/F Soil Waste vent Pipes 75 mm complete job

P/F PVC cowel cover over vent pipe of approved quality

P/F 100x75 mm reducer PVC of approved quality

Providing and fixing of Cp grating 100mm dia.

Providing and fixing Jaquar/approved make health faucet with 8 mm dia, 1.2 metre long flexible tube and wall hook, complete with non-return valve (N.R.V) of approved brand and manufacture; including all CP brass fittings, testing for leakages, and making good the walls/floors, complete in all respects as per directions of Engineer-in-Charge.

Providing and fixing Jaquar/approved make CP brass angle valve of size 15 mm, heavy duty, with wall flange, suitable for washbasin, sink, WC, or geyser connections, including supply of all materials, labour for fixing, testing for leakages, and making good the wall finishes, complete in all respects as per directions of Engineer-in-Charge.

Providing and fixing Jaquar/approved make CP brass bib cock of size 15 mm, heavy duty, conforming to IS standards, with wall flange, suitable for washbasin, sink, and utility connections, including supply of all materials, labour for fixing, testing for leakages, and making good the wall finishes, complete in all respects as per directions of Engineer-in-Charge.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing of toilet paper holder.C.P. brass

Providing and fixing of stainless steel soap case of approved quality and make

Providing and fixing stainless steel liquid soap container of 400 ml capacity, wall-mounted type, fabricated from 304 grade stainless steel with brushed/mirror finish, fitted with push-type dispensing mechanism for controlled flow, suitable for institutional and public utility use. The container shall be corrosion-resistant, hygienic, and easy to refill, supplied complete with mounting brackets, screws, and accessories, fixed firmly to wall surface including cutting, drilling, and making good the same, testing for proper operation, all complete as per directions of Engineer-in-Charge.

Providing and fixing of Towel rail C.P. brass 600 x20 mm together with a pair of C.P. brass brackets to fit the size of towel rail

Providing and fixing Aluminium Composite Panels (ACP) 3 mm thick in roofs and soffits, including aluminum framework and necessary accessories complete job as per direction of Engineer-in-Charge.

Providing and fixing of superior quality wall paper 3D fibre backed vinyl of approved brand/Nilaya by Asian paint or India Circus/Birla Opus, manufacture, color and design with necessary adhesive Gum powder fully chemicalised or favicol whichever is suitable including prepration of wall surface by way of sand papering, applying of POP/wall putty and other necessary repair, all complete at all heights as per specifications, drawings and as directed by Engineer In-charge etc.

Providing and fixing raised particle name board for Meeting/Conference Hall, fabricated on Aluminium Composite Panel (ACP) sheets of approved shade and thickness (minimum 3 mm), with lettering/logo in raised particle/embossed style as per approved design.

Providing and fixing recessed type LED luminaire, 2’×2’ (600 mm × 600 mm), suitable for grid ceiling installation, comprising high-efficiency LED modules with minimum system wattage 36W–45W, luminous efficacy ≥100 lm/W, color temperature 4000K–6500K (neutral/cool white), CRI ≥80, with glare-free diffuser and powder-coated housing, complete with electronic driver (THD <10%, PF ≥0.95), including wiring connections, testing, and commissioning, all complete as per directions of Engineer-in-Charge.

Dismantling of old, unstable and unserviceable existing structure including brick masonry, cement concrete (plain or reinforced), stone work, and CGI sheet roofing, carefully taking down all components, stacking serviceable materials for reuse, and disposing of unserviceable debris outside the site premises; including cost of labour, tools, scaffolding, and carriage of materials in all sorts, complete as per directions of Engineer-in-Charge.

Providing and fixing of Information sign board and three stage photographs (Pre, post and during execution)

Carriage of Sand for an average lead of 30 Km.

Carriage of Crusher Bajiri for an average lead of 30 Km

Carriage of Cement bags for an average lead of 5 Km

Carriage of Bricks for an average lead of 60 Km.

Carriage of stones for an average lead of 30 Km.