Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.8 LAccepted-Finance | ₹8.8 L | L1 | Accepted-Finance Lowest |
| 2 | L2₹9.1 LRejected-Finance | ₹9.1 L | L2 | Rejected-Finance Other than lowest |
| 3 | L3₹10.0 LRejected-Finance | ₹10.0 L | L3 | Rejected-Finance Other than Lowest |
| Sl No | Description | Qty | Unit | Rajinder Kumar Thakur L3 | M/S Sidharth Bore Well L1 | Mohinder Kumar Gupta L2 |
|---|---|---|---|---|---|---|
| 1.00 | Transportation of Suitable Truck Mounted DTH and ODEX/ Percussion Calyx / RC drilling rigs along with necessary accessories etc to the site of work and errection of rig including levelling etc complete in all respects as per the directions of the Engineer - in - Charge.
. | 1 | No | 8,000 ₹8,000 | 5,000 ₹5,000 | 5,100 ₹5,100 |
| 2.00 | Drilling Bores of 200 mm dia as per IS 2800- 1979 from ground level in the overburden as per direction of the Engineer-in-Charge / hydrogeologist with suitable rigs for drilling through rocky formation consisting of sand stone, limestone, dolomites, congiomerate, boulder pebble, gravats, silt, clay or any other type of sedimentary, metamorphic and igneous rocks including cost of attachements consumables stores bils, water, POL etc complete in all respect as detailed below- | 90 | Rmt. | 6,600 ₹5.9 L | 5,800 ₹5.2 L | 5,900 ₹5.3 L |
| 3.00 | Lowering IS marked 175 mm nominal bore 6 mm thick MSERW casing plain end casing pipe as per IS 4270 -2001 with upto date amendments in a length of 300 metres including cost of cutting welding, transportation charges complete in all respect as per directions of the Engineer-in- Charge. The pipe shall be slotted at a suitable interval thickness 6 mm. | 90 | Rmt. | 4,300 ₹3.9 L | 3,800 ₹3.4 L | 4,000 ₹3.6 L |
| 4.00 | Providing and Fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of the Engineer-in-Charge. | 1 | No | 6,500 ₹6,500 | 5,000 ₹5,000 | 6,000 ₹6,000 |
| 5.00 | Collection and Preservation of soil samples in polythene bags complete in all respects as per the directions of the Engineer-in-Charge. | 1 | Nos. | 100 ₹100 | 50 ₹50 | 75 ₹75 |
| 6.00 | Development of Bore Well and yield testing with air compressor through V notch and disinfection etc, complete in all respects as per IS-2800- 1979 and as per directions of the Engineer - in - Charge. | 1 | Hour | 6,000 ₹6,000 | 4,000 ₹4,000 | 5,000 ₹5,000 |
Tender Value
₹8.8 L
EMD Value
₹17,600
Closing Date
18 Apr 2026, 5:00 pmClosed
Executive Engineer
EE JSV Mandi
Drilling and Lowering of Borewell 175mm dia 90 mtr deep at vill fagla Near Bridge NHAI-003 VKV/2025/1572 MLALAD
2026_HPIPH_134069_1
1022-1121
Open Tender
Miscellaneous Works
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹350
₹17,600
8 May 2026
11 Apr 2026
20 Apr 2026
11 Apr 2026
18 Apr 2026
11 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
Transportation of Suitable Truck Mounted DTH and ODEX/ Percussion Calyx / RC drilling rigs along with necessary accessories etc to the site of work and errection of rig including levelling etc complete in all respects as per the directions of the Engineer - in - Charge.
. | - | No | - | - | |
Drilling Bores of 200 mm dia as per IS 2800- 1979 from ground level in the overburden as per direction of the Engineer-in-Charge / hydrogeologist with suitable rigs for drilling through rocky formation consisting of sand stone, limestone, dolomites, congiomerate, boulder pebble, gravats, silt, clay or any other type of sedimentary, metamorphic and igneous rocks including cost of attachements consumables stores bils, water, POL etc complete in all respect as detailed below- | - | Rmt. | - | - | |
Lowering IS marked 175 mm nominal bore 6 mm thick MSERW casing plain end casing pipe as per IS 4270 -2001 with upto date amendments in a length of 300 metres including cost of cutting welding, transportation charges complete in all respect as per directions of the Engineer-in- Charge. The pipe shall be slotted at a suitable interval thickness 6 mm. | - | Rmt. | - | - | |
Providing and Fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of the Engineer-in-Charge. | - | No | - | - | |
Collection and Preservation of soil samples in polythene bags complete in all respects as per the directions of the Engineer-in-Charge. | - | Nos. | - | - | |
Development of Bore Well and yield testing with air compressor through V notch and disinfection etc, complete in all respects as per IS-2800- 1979 and as per directions of the Engineer - in - Charge. | - | Hour | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
Form8.pdf
Tender Documents • 1.13 MB
Form6.pdf
Tender Documents • 0.67 MB
BOQ_198259.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid