Providing and fixing of Area lighting and power points for the erection of Kiran Aircraft on display pole at proposed garden near ESS-01 in North Campus of IIT Mandi

Amount

Wiring for circuit/ sub-main wiring along with earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Wiring for circuit/ sub-main wiring along with earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and making end termination with brass compression gland and aluminium lugs for 4 X 16 sq. mm (28mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and making end termination with brass compression gland and aluminium lugs for 4 X 25 sq. mm (28mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Earth work in excavation for All kinds of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge.

Providing and laying in position cement concrete of 1:3:6 (1 Cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and installation of 9W LED bollard with opal PC diffuser and IP65 protection, CCT 3000 k etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and installation of 35 W New generation, IP 65 LED post-top family, CCT 3000 K energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source and supply of 4 meter Aesthetically designed decorative hot dipped galvanized mild steel step pole with grey powder finish. Window - Plasma cut & duly chamfered opening window of 300x110 mm for terminal connections & mounting accessories. Window cover is fitted with allen screws to the pole. Decorative sleek casting ring to increase aesthetical appeal and 5to 32A SP "C" Curve MCB for lighting control and foundation bolts including as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and installation of 50 W Flood light luminaire, CCT 5700 K with polycarbonate optics, pressure die-cast housing along with IP66 ingress protection. 4kV in-built surge protection. 120 lm/W, etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and installation of 9W LED Step light, CCT 3000 K powder coated cast aluminium body & IP66 protection. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and installation of 15W Environmental friendly, new generation, energy saving, decorative IP 66 LED UP-down Luminaire with wall surface mounting using COB LED as light source & IP66 protection. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying of 4 Core x 25 Sq. mm of 1.1 KV aluminium conductor XLPE Insulated, PVC inner-sheathed amoured, Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying of 4 Core x 16 Sq. mm of 1.1 KV aluminium conductor XLPE Insulated, PVC inner-sheathed amoured, Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying of 4 Core x 6 Sq. mm of 1.1 KV aluminium conductor XLPE Insulated, PVC inner-sheathed amoured, Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and making end termination with aluminium lugs for 4 X 16 sq. mm size of PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and making end termination with aluminium lugs for 4 X 6 sq. mm size of PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

SITC of outdoor type distribution feeder panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system, fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 100 Amp capacity extensible type TPN aluminium alloy bus bars, i/c providing following switch gears :- a) 1 Nos 63 Amps 10 KA four pole MCB and 3 Nos. Phase indication LED lamps with 2 Amp back up HRC fuse, Multifunction Meter with metering FRLS (Fire retardant low smoke) Internal wiring, In-built Short-Circuit Protection, Class H Insulation, Analog Timer Switch, 65 A TP Contactor i) 40 A, 10 KA TPN MCB – 2 ii) 16 A, 10 KA SP MCB -6 iii) 16 A, 10 KA DP MCB -4

Erection of metallic pole up to 4.5 metre length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

M/s Texas Traders (BID ID -3261017)

Dhiman Elect (BID ID -3261179)