Land Development and Infrastructure Development at Cheepurupadu Market Yard of A.M.C, Kotabommali in Srikakulam District

Cleaning duly using JCB including with cleaning jungle and uneven surface spreading for other items including cost and conveyance of all materials and all labour charges etc., as per standard specifications as directed by the Engineer-in-charges.

Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.

Filling with Dust (2.36mm & bellow) in trenches with an initial lead from approved source in layers not exceeding 150mm thick consolidation each deposited layers by watering and ramming including cost and conveyance of water to work site and all operational, incidental and labour charges etc., Complete.

P.C.C (1:4:8) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work.

Filling basement with Gravel brought from approved sources including watering,tamping, ramming, layers including cost and conveyance all materials and labour charges, seignorage charges etc., complete as per standard specification.

Granular sub-base/base/surface course with gravel (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rota.or at once and compacting with smooth wheel roller to achieve the desired density complete as per standard specifications and as directed by the departmental Engineer-in-Charge.

Vibrated Cement Concrete M20 Nominal mix equivalent to (1:2:4) proportion (cement: fine aggregate: Coarse aggregate) using 66.67% of 40mm HBG metal and 33.33% of 20mm HBG (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work.

VRCC M-20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. using cement 400kgs.

For Pedestals upto GL

For Plinth Beam

For Columns above 3.66mts

For Lintel @ 2.45Mts Height

For RCC Basic rate For Sunshades (1.00m wide) (75mm thick at wall & 50mm thick @ free end)

For Roof Beams @ 4.15mtr height

For Roof slab 125 mm thick

Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work.

Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 225mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength. For Basement.

Fly ash cement/ lime solid blocks in C.M. (1:6) prop. of size 290mm x 225mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength. For Superstructure.

Plastering with CM(1:5) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., of all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work.

For Superstructure

Plastering with CM(1:5) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., of all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work.

Ceiling Plastering 12 mm thick in CM (1:3) sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete.

Providing impervious coat over RCC Roof Slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work.

Flooring with Ceramic Tiles of 7.3mm thick 1st. quality of any shade as approved by Engineer - in - charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work. Excluding cost of CC bed BLD CSTN 7.6.

Dadooing to walls with Glazed Coloured Tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5) 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work. BLD CSTN 7.20.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 63.5x100 MM . The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. (BMT- N.83C) and Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 3 hinges will be required for fixing the door with the frame with fixing all fixures ( BMT N-92)(1050 X 2100 mm).

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 3 hinges will be required for fixing the door with the frame with fixing all fixures ( BMT N-92).

Fabrication and supply and fixing of 20 mm dia holding down bolts of 750 mm long including cost and conveyance of all materials and including parting with red oxide approvel brand etc., complete.

Fabrication, Supply and Erection of M.S Tublar truss of 11.45MTs Span With 72x72x3.60mm Square pipe of top & Bottom chord and Cleats for purlins 12 of size 150x65x5mm thick and 6 nos Cleats for the tie runner of size 150x65x5mm thick and internal numbers truss 50x50x3.60mm thick of size 450x300x12mm thick 2 nos Dummy plate of size 72X72X3mm 4nos. for each truss including cost and coneveyance of all materials and all labour charges fabrication and fixing for truss and all incendental charges and operational charges for fifnfished item of work as per standed specifications.

Fabrication, Supply and Erection of M.S Tublar truss of 2.89MTs Span With 50x50x3.60mm Square pipe of top & Bottom chord and Cleats for purlins 3 of size 150x65x5mm thick and internal numbers truss 50x50x3.60mm thick of size 450x300x12mm thick 2 nos Dummy plate of size 50X50X3mm 2nos. for each truss including cost and coneveyance of all materials and all labour charges fabrication and fixing for truss and all incendental charges and operational charges for fifnfished item of work as per standed specifications.

Fabrication and supply of 50 X 50 mm pipe of 3.60mm well thickness for Roof Purlins duly welding with 5mm thick elements of 150X65mm on both sides of thick pipe and long joining with 5mm both including cost and conveyance of all materials and including parting with red oxide approvel brand square pipe.

Fabrication and supply of 76.10 ODMS Pipe of 3.60mm pipes of pole duly welding with 12mm thick Base plate of size 230X230mm on both sides of pipe including cost and conveyance of all materials etc., complete.

Fabrication and supply of 76.10 ODMS Pipe of 3.60mm pipes of pole duly welding with 5mm thick cleats of size 150X65mm on both sides of pipe and long joining with 10mm bolts including cost and conveyance of all materials and including parting with red oxide approvel brand etc., complete.

Roofing With 0.5mm thick galvanized /pre painted G.I profiled sheets with crimp of 200mm length fixed to the purlins With 14 size self drilling with neoprene washer Side laps are stiched with self tapping drilling screws. End laps are to be sealed with 25x3 mm Butyl tape .the sheets are provided with anti capillary groove.including cost and labour charges etc., complete as per standard specification for finished item of work.

Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours including cost and conveyance of all materials and all labour charges complete for finished item of work.

Painting two coats with synthetic enamel paint first grade to new iron work including one coat of red oxide paint for New Iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. for New Iron work.

Painting to New walls Work with two coats of Plastic Emulsion paint (acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter.) of superior quality of approved brand and shade over a base coat of Cement Primer Gr I( 3 coats) in all to give an even shade after thoroughly brushing the surface to remove all loose materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work BLD CSTN 10.2 & 2011-12 SSR Amendament Datas S. No.15.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'P' trap including cost & conveyance of all materials and all operational and incidental charges etc., complete for finished item of work BMW D.13.

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacity Hindustan Sanitary ware/ parry/ Neycer with internal components including cost & conveyance of all materials and all operational and incidental charges etc., complete for finished item of work BMW D.11.

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 including cost & conveyance of all materials and all operational and incidental charges etc., complete for finished item of work BMW D.33.

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock including cost & conveyance of all materials and all operational and incidental charges etc., complete for finished item of work BMW D.26.

Cost, Supply & Fixing of 110 mm dia 6 Kg/sq.cm - Prince /Sudhakar /Kisan/ Supreme or any ISI Brand including Cost & Conveyance of all materials and all labour chareges etc., complete for finished item of work BMW-G.13.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) etc., complete for finished item of work as per standard specifications and as directed by the Engineer - in - charge at site of work.

For 28.60mm OD pipe - SDR 13.5

For 22.20mm OD pipe - SDR 13.5

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arragnement & Making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks.

Supply and fixing of 12.7 mm NP stop cock Indian make heavy duty inclduing cost and labour charges etc., complet finished item of work.

Supply and Fixing of 25mm dia 1.8mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant FRLS P.V.C. insulated 1100v grade as per IS:694/1990 sepacification of flexible copper cable (ISI MARK)of makes Ploycab/ Havells/ Suncab / Goldmedal/ million/ Fortune art / Paragon / HPL / L & T / Power flex / RPG / Anchor / Bonton in existing pipe with mini modular type 6A switch with cover frame and Ceiling rose of makes GM / Anchor / Excel / Gold medal /Million / Vimal /Maru / Miltec / CPL & 12 module covering plate of makes legrand Arteor / MK Blenge / Schneider Zen Celo, 12 module metal box to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.

Supply and fixing of batten holder / slanting holder of makes Anchor / Gold medal olive / Million Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges with 11W CFC Lamp (for new installation) of makes Wipro / GE / Philips / Crompton / Bajaj.

Supply and Run of 2 of 36/0.3mm (2.5 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., completecopper cable Makes: Finolex / RR kabel / Havells /KEI.

Supply and fixing of 20W, T8, 2400mm length LED retrofit tube light, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes: VIN/Surya / Pharox /Greenlites/ Fortune Art / Capart / GM / Goldmedal / Syska / Cosmo / Sieger/Ib LED/P romtec/Eveready/Stanjo/Enrich/Opple b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / VERLIGHT/ San'an.

Supply and fixing of 8 way SPN Distribution board with IP-20 protection suitable for 6 nos SP MCB's single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting with 40A DP Isolator / RCCB / ELCB - 1 No for incomer, 6-32A SP MCBs - 6Nos for outgoing of makes Legrand / Schneider etc., complete.

Drilling of Bore wells by with DTH rig drilling to a finished dia of 150/163mm in a formations suitable for down the hole hammer drilling such as medium hard rock formation, all consolidated formations etc., and reaming the Bore to suit inserting of 180mm UPVC casing pipe of 6kgs etc., including insertion of UPVC casing pipe couplings, caps any other relevant materials upto required depth as directed by the department, transportation of drilling rigs and supporting vehicles and including bore development flushing of Bore well at an average pressure of 100PSI conducting yield test about 1 hour crew charges required in fixation of pipes assembly completely done to the satisfaction of the department and stipulated in the Technical conditions enclosed to this schedule for anywhere in Srikakulam District but excluding the cost of casing pipe, the entire work should be carried out as per ISI specification 2000 part 11, 1979. The rate is including all taxes and TOT.

Cost and supply of 250mm UPVC Class - 3 (6 kgf) as per ISI specification IS : 4985/1988 for potable water supplies confirming to IS : 4985/1988 as amended from time to time including revisions if any and confirming to technical conditions specified in the specification with ISI mark, and Transportation etc., complete but excluding all taxes.

Cost and supply of 180mm UPVC Class - 3 (6 kgf) as per ISI specification IS : 4985/1988 for potable water supplies confirming to IS : 4985/1988 as amended from time to time including revisions if any and confirming to technical conditions specified in the specification with ISI mark, and Transportation etc., complete but excluding all taxes.

Labour charges for Slotting to the UPVC casing pipe including Cost & Conveyance of all materials and all labour charges for Slotting etc., complete for finished item of work.

Supply and fixing of 40mm dia HDPE pipe 10kg/Sq.cm including cost and conveyance of all materials and labour chargers for finished item of work.

Supply and Run of 2 of 6 Sq.mm WPSC Aluminium cable of makes Polycab / V-Guard / Million / Payal / Vimal / Nakoda along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains.

Fabrication, transportation and supply of suitable size panel board for single phase submersible motor 1HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of complete.,. Makes: As per list of recommended brands.

Supply and Transportation of, 5 star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes : As per list of recommended brands as category 1.00HP 10 Stage.