REPAIRING AND RENOVATION OF R&B ELECTRICAL DIVISION & SUB DIVISION OFFICE AT VALSAD TA./DIST. VALSAD (REPAIR OF FURNITURE DOOR-WINDOW TOILET & MISCELLANEOUS WORKS)

Name of Work :-

REPAIRING AND RENOVATION OF R&B ELECTRICAL DIVISION & SUB DIVISION OFFICE AT VALSAD TA./DIST.

VALSAD (REPAIR OF FURNITURE, DOOR-WINDOW, TOILET & MISCELLANEOUS WORKS)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 WOODEN PARTITION 57.06 Sq. Mt 2837.25

Providing and fixing of full height solid sandwitch partitions (AS PER

DRAWINGS) using 50 x 50 mm aluminium pipe for framing, 12mm ply

(both sides)of brand greenply ecotech,mr mr conkreteply,archidply etc,

teak wood beading patti etc. making of rebates and including all hardware

items, groove (if shown) with all materials, labour, lead and wastage etc.

complete. And Finished with different materials,and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

2 ABOVE CEILING PARTITION 13.59 Sq. Mt 1779.06

Providing and fixing of above ceiling partitions (AS PER DRAWINGS) using

75 mm x 50 mm x 1 mm aluminium pipe for framing,with pine

wood/ghana wood infill etc. including all hardware item, with all

material, labour, lead,scaffolding and wastage etc. and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.

3 GLASS PARTITION WITH FILMWORK 12.96 Sq. Mt 2375.95

Providing and fixing of full height glass partitions (AS PER DRAWINGS)

using patch fitting / U-channels, 12mm clear toughned glass, film work

as/drawing including all hardware item with all material, labour, lead and

wastage etc. and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.

4 WOODEN PANELLING 37.24 Sq. Mt 1377.75

Providing and making of panelling on Wall & columns using 12mm ply,

aluminium pipe for (2" x 1") framing, Ghana bidding patti (11/2" x

3/4")including all material, labour and hardware complete,including

scaffolding as per instruction of architect. And Finished with different

materials,and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.

5 MIRROR FINISH(5mm thick brown/black Mirror) 2.00 Sq. Mt 1937.15

Providing and fitting of mirror/glass (as per drawing & approved shade)of

brand ais,modiguard,etc on ply panelling / on tile cladding including all

material, labour and hardware, waste of materials and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

6 SOFTBOARD FINISH 21.06 Sq. Mt 1189.29

Providing and fitting of 12 mm SOFTBOARD with fabric wraping (as per

drawing & selection) on ply partition including all material,

adhesives,labour and hardware, waste of materials complete as per

instruction of architect and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.

7 HDF FINISH with SATIN PAINT 130.30 Sq. Mt 608.46

Providing and fitting of 6mm waterproof HDF sheet of brand green,action

tesla etc (as per drawing) on ply partition including all material, labour

and hardware, waste of materials & finished by atleast 3 COATS of satin

paint including lappi and primer and complete the work satisfactorily as

per instruction of architect or Engineer-in charge.

8 LAMINATE FINISH 130.30 Sq. Mt 762.81

Providing and fitting of 1 mm laminate (as per drawing & selection) of

brand greenlam,merinolam,shivshakti laminates etc on ply partition

including all material, adhesives,labour and hardware, waste of materials

complete as per instruction of architect.[Basic Rate of Laminate :

2000rs./sheet (8' x 4')] and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.

9 SOLID DOORS FOR WOODEN PARTITION(75 MM TK) 2.40 Sq. Mt 4260.33

Providing and fixing of 75 mm solid doors (AS PER DRAWINGS) using 50 x

50 mm aluminium pipe for framing, 12mm ply (both sides)of brand

greenply ecotech,mr mr conkreteply,archidply etc, 50 mm teak wood

beading patti at the perifery and framing etc. making of rebates and

including all hardware items,mortise door lock ,conceal door closer of

brand enox,ozone,dorma,and groove (if shown) with all materials, labour,

lead and wastage etc. complete. And Finished with different

materials,and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.

10 SOLID DOORS FOR WOODEN PARTITION(75 MM TK) 4.56 Sq. Mt 4227.83

Providing and fixing of 75 mm solid doors (AS PER DRAWINGS) using 50 x

50 mm aluminium pipe for framing, 12mm ply (both sides)of brand

greenply ecotech,mr mr conkreteply,archidply etc, 50 mm teak wood

beading patti at the perifery and framing etc. making of rebates and

including all hardware items,mortise door lock ,conceal door closer of

brand enox,ozone,dorma,and groove (if shown) with all materials, labour,

lead and wastage etc. complete. And Finished with different

materials,and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.

11 GLASS DOOR 5.00 No 15072.23

Providing and fixing Glass door of approx size 1.00 x 2.40 mt. using 12 mm

toughned glass door with filmwork & wooden handle & floor spring AS

PER DRAWING including all acceessories, locks,aluminium glass profiles,

material, silicone, labour, installation, Hole & slote charges etc. and

complete the work satisfactorily as per instruction of architect or

Engineer-in charge.

12 STORAGE UNIT WITH LAMINATE FINISH 173.47 Sq. Mt 6794.27

Providing and Making of Storages (AS PER DRAWINGS) using ply of brand

of brand greenply ecotech,mr mr conckreteply,archidply etc, (thickness as

specified)/ sag wood and finished by 1 mm Laminate outside, 1mm tk

laminate (inside), water pu polish (as shown), drawers, shelves etc. with

all hardware, handles, lock , magnet and other acessories with all

material, labour, lead and wastage etc. and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

13 WOODEN BLIND CURTAIN 12.54 Sq. Mt 2499.75

Providing and fixing of approved quality wooden vanishing blinds 50 mm

wide slit of brand signature -essential series, with easy lift cord/chain

operation, including all acceessories, material, labour,installation etc. and

complete the work satisfactorily as per instruction of architect or

Engineer-in charge.

14 GYPSUM CEILING 142.00 Sq. Mt 812.36

Supplying and Fixing of Suspended ceiling system components which

includes Single Layer Boarding with 12.5mm thick USG Boral Standard

Plasterboard This includes of USG Boral Thundersteel Perimeter Channel

(0.50mm thick having one flange of 20mm and another flange of 30mm

and a web of 28mm) screw fixed to brick wall/partition with the help of

approved screws at 600mm centers. Then suspending of USG Boral

Thundersteel Intermediate channel (45mm x 0.90mm thick with two

flanges of 15mm each) from the soffit at 1220mm centers with of USG

Boral Thundersteel Ceiling Angle (25x10mmx0.50mm thick) fixed to RCC

Slab with of USG Boral Soffit Cleat (37x27x25x1.6mm thick) and 8mm dia

40mm long Anchor Fastener @ 600mm Centers, respectively. USG Boral

Thundersteel Ceiling Section (having web of 51 mm and two flanges of

27mm each) are then fixed to the of USG Boral Thundersteel

Intermediate channel with the help of connecting clip (2.6mm Dia) and in

perpendicular direction to the USG Boral Thundersteel intermediate

channel at 457mm centers. USG Boral Thundersteel profiles are rolled

with AZ Steel (150 GSM & 310 MPa Yield Strength) having base metal

conforming to IS 513:2016 as per IS 15961:2017/ AS 1397:2001).12.5mm

thick USG Boral Standard Plasterboards (confirming to IS 2095 Part 1) is

screw fixed with 25mm long Drywall screws at 230 mm centers. The

screw fixing of gypsum boards to the metal framing at the periphery,

openings and cut edges should be at 150mm centers.All the Gypsum

boards must be staggered. All joints to be taped & finished with

USGBORAL Paper tape & All-Purpose Joint Compound confirming to

ASTM C475. Material certificate to be provided by company. and

15 C92 METAL CEILING 58.00 Sq. Mt 1818.00

Providing and fixing of G.I metal perforated 92 C CEILING SECTIONS on

ceiling or wall of Galvanized Iron Panel OF 108 mm WIDTH like brand

Metalium, armstrong, hunterdouglas. All Baffles should be Coil coated

and shall be chromatized for maximum bond between metal and paint,

enamelled twice under high temperature, one side with full primer and

finish coat, the other side (Inner side) with a primer coating and skin coat

on continuous paint line or Powder coated panel shall be 50 microns thick

on exposed surface., Carrier shall be 20mm wide at bottom and 42 mm

deep with cutouts to hold the panel in a module of 50 mm, carrier shall

be roll formed out of 0.45 mm Galvanized steel and cut to a standard

length of 2.4 mtr. and INCLUDING ALL NECESSARY M.S FABRICATION,

mm synth pf insulation, scaffolding,all hardwares, and anchor fastners,

AND complete the work satisfactorily as per instruction of architect or

Engineer-in charge.

16 PLASTIC PAINT 279.47 Sq. Mt 202.00

Providing and applying plastic paint of approved quality, company and

shade upto finishing (min 3 coats) including all material, labour including

scaffolding etc. and complete the work satisfactorily as per instruction of

architect or Engineer-in charge. (Basic rate of plastic paint- 12 rs/sq.ft.)

17 POP PUNNING 137.47 Sq. Mt 202.00

Providing and fixing of POP Punning and finished by company approved

gypsum, taping, lapi, including scaffolding etc. and including grooves as

shown in drawing And including satin paint complete with all material,

labour with all lead, lift and transport.and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

Providing and fixing of table including side storage as per drawings and

instructions provided, using ply of brand greenply ecotech, mr

conckreteply, archidply etc., aluminium pipe for framing and finishing it

with 6 MM CORIAN of brand granium,samsung,dupont ,and 1mm unicore

laminate and 4mm HDF + 1 MM LAMINATE as selected by the architect

(basic rate of unicore laminate is 3000 per sheet and other 1mm laminate

is 2000 per sheet, of size 8'0 x 4'0 ) tagboard with fabric as per selection

and drawings, 3 mmx 3mm groove (if shown) with all materials,polish

work,beading patti, labour, lead and wastage,m.s fabrication work with

80 microns powder coatings of selected shade, nylon leg levelers etc.

complete. And Finished with different materials,and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

19 T2 - "L "TABLE WITH SIDE STORAGE(1.0 X 2.0) 1.00 No. 20705.00

Providing and fixing of L-TYPE office table of size 1.0 x 2.0 mt and side

storage of width 1.00 mt as per drawings and instructions provided,using

ply of brand greenply ecotech,mr conckreteply,archidply etc,or

aluminium pipe for framing and finishing it with 1 mm unicore laminate

and 1mm laminate of brand greenlam or selected by the architect(basic

rate of unicore laminate is 3000 per sheet and other 1mm laminate is

2000 per sheet, of size 8'0 x 4'0) ,tagboard with fabric as per selection

and drawings, 3 mmx 3mm groove (if shown) with all materials,polish

work,beading patti, labour, lead and wastage,m.s fabrication work with

80 microns powder coatings of selected shade, nylon leg levelers etc.

complete. And Finished with different materials,and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

Providing and fixing of table including side storage as per drawings and

instructions provided, using ply of brand greenply ecotech, mr

conckreteply, archidply etc., aluminium pipe for framing and finishing it

with 6 MM CORIAN of brand granium,samsung,dupont ,and 1mm unicore

laminate and 4mm HDF + 1 MM LAMINATE as selected by the architect

(basic rate of unicore laminate is 3000 per sheet and other 1mm laminate

is 2000 per sheet, of size 8'0 x 4'0 ) tagboard with fabric as per selection

and drawings, 3 mmx 3mm groove (if shown) with all materials,polish

work,beading patti, labour, lead and wastage,m.s fabrication work with

80 microns powder coatings of selected shade, nylon leg levelers etc.

complete. And Finished with different materials,and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

21 HIGH BACK CHAIR - TYPE C 3.00 No. 6565.00

Providing and fixing of highback office chair, with bifma class IV gas lift.

Oracle HB Chair, Beige frame in glassfilled nylon in reinforced grey/black

horizontal lines elastomer mesh, with adjustable headrest, Seat front tilt

with lock & seat slider, Tapered seat density mould foam to make

waterfall angle, Alluminium five prong base with silent rubber castor,

Adjustable side ways arms with additional side way angle swith, multi

locking tilting facility, wooden PVC patch at the back on nylon/PVC of size

6" x 9" for show purpose.as per selection and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.Basic

rate of chair is 8100/- per chair. BRANDS : COHUMAN, BRISTOL,

22 LOW BACK CHAIR - TYPE C (STAFF) 17.00 No. 4242.00

Providing and fixing of highback office chair, with bifma class IV gas lift.

Oracle HB Chair, Beige frame in glassfilled nylon in reinforced grey/black

horizontal lines elastomer mesh, with adjustable headrest, Seat front tilt

with lock & seat slider, Tapered seat density mould foam to make

waterfall angle, Alluminium five prong base with silent rubber castor,

Adjustable side ways arms with additional side way angle swith, multi

locking tilting facility, wooden PVC patch at the back on nylon/PVC of size

6" x 9" for show purpose.as per selection and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.Basic

rate of chair is 5400/- per chair. BRANDS : COHUMAN, BRISTOL,

23 LOW BACK CHAIR - TYPE C (STAFF) 14.00 No. 4040.00

Providing and fixing of highback office chair, with bifma class IV gas lift.

Oracle HB Chair, Beige frame in glassfilled nylon in reinforced grey/black

horizontal lines elastomer mesh, with adjustable headrest, Seat front tilt

with lock & seat slider, Tapered seat density mould foam to make

waterfall angle, Alluminium five prong base with silent rubber castor,

Adjustable side ways arms with additional side way angle swith, multi

locking tilting facility, wooden PVC patch at the back on nylon/PVC of size

6" x 9" for show purpose.as per selection and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.Basic

rate of chair is 5400/- per chair. BRANDS : COHUMAN, BRISTOL,

24 NAME PLATE 8.00 No. 808.00

Providing and fixing of 10 mm clear Acrylic cut work and fixing 3mm

acrylic on top of brand Ptglass,astari etc,with all laser and cnc

work,including all material, labour,25 mm ss studs for mounting and

other hardwares, waste of materials etc and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

25 PLANTER WITH REAL PLANTS 10.00 No. 757.50

Providing and fixing of planter/pots of frp or plastic with real indoor

plants as per selection and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.

26 WALL CLOCK 5.00 No. 454.50

Providing and fixing of wallclocks as per selection and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.(basic

rate of wall clock including gst is rs 750/-per piece)

27 OUTDOOR FLOOR MAT 2.00 No. 757.50

Providing and fixing outdoor floor matt as per selection and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.

28 INDOOR FLOOR MAT 2.00 No. 252.50

Providing and fixing indoor floor matt as per selection and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.

29 SS DUSTBIN 7.00 No. 505.00

Providing & Supplying of SS. Dustbin of brand cello,pigeon etc,having size

of 8 In. Diameter & 12" Height etc. complete as per selection & directed

by the Architect and approved by the Engineer in Charge.

30 DEMOLATION OF BRICKWORK OR LIGHTWEIGHT ACC BLOCK 5.54 CU MT. 550.40

Demolition of Brick work and stone masonry including stacking of

serviceable materilas and disposal of unserviceable materials with

all lead and lift.

In Words Twenty Five Lakh Sixty Nine Thousand Three Hundred Forty Five Rupees And Five Paisa Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 2569345.05 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by Executive

Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to Tender.

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other Construction

works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated 9/12/2005

notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no GWA/2004-

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and drainage

& water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his risk and

11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

(A) materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division