Interior furnishing ,electrical and ELV works of basement 2 shell office space at ,ISC, KTIZ, Kalamassery

Appendix 1 : Interior and furnishing

NDSR: Linear Workstations: Fabrication, Supply & Installation work station with each individual unit as per the drawing. 18mm marine IS 710 Grade plywood with 1mm laminate (Greenlam) finish on both side with 2 mm PVC edge band. Necessary wire managent so that switches to be mounted on metal back box fixed on metallic wire tray below work top and acccesed using soft closing access flap, Accessories (excluding switch and socket). Leg : Aluminium extruded powder coated leg and MS powder coated edge beams with necessary plinth screw bushes at the base. 300mm acrylic partition on table top with holder at the base. Including cost and conveyance of all materials labour charges etc Size : 1200 L x 600 W X 750 H mm

NDSR: Pedestal storage : Fabrication, supply and installation of side storage as per the size with 16mm marine IS 710 Grade plywood both side 1 mm laminated (Greenlam) finish with three soft closing drawers and profile handle . All edges are lipped with 2mm and 0.8mm PVC edge band. Bottom shall be provided with castor for mobility. Hardware: Ebco. All pieces will be joined using boring. 400x450x580 mm (beneath Table).Including cost and conveyance of all materials labour charges etc

NDSR : Mid back Chair: Supplying and placing mid back chair (Make:BosQ/Godrej/Minister /Equivalent) as per design intent with comfortable sitting posture so as to get required low and high levels. Provide Mesh back, multifunction synchro tilt mechanism and adjustable armrest with arm pad complete as per manufacture specification including all cost and conveyance of materials, labour etc complete.

50 mm diameter GI powder coated pole for wire management from tray to center of table.

Appendix III - Electrical

1.17.3 - Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq mm

Item code 1.7.2-Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.24.1- Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

1.24.3 - Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp switch

1.24.4 - Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet

1.24.5 - Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 6/16 A socket outlet

1.26 - Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.28.4 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 6 Module

1.27.2 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmX75mm)

MCCB, MCB AND DBS

2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Dismantling of 6A/16A switch & Sockets, plastic boxes and handed over to client

installing of 6A/16A Switch & socket , plastic boxes ( items supplied by department)

Appendix IV- IT&Network

Networking Passive (A)

Item code:1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required

Item code : 1.53.1 1 run cable

Item code: 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

Item code: 1.21.1 20mm

Item code: 1.21.2 25mm

Item code: 1.21.3 32mm

Item Code: 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Item code: 1.27.1 1 or 2 Module

Item code:90.9.2 Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as require

Item Code: 90.9.2.1 100 x 50 mm CMS with base and lid

Item Code: 90.9.2.3 External angle 90 degree

Item Code: 90.9.2.4 Flat angle 90 degree

Item Code: 90.9.2.5 Internal angle 90 degree

Item Code: 90.9.2.8 End Cap

Supply and installation of following sizes of hot dip galvanized perforated type cable trays from 0.6 mm thick GI sheets continuously connected and duly suspended from the ceiling/wall with minimum 8mm dia vertical GI threaded rods supported by 25mm x 25mm x 3 mm or nearest available size slotted frame, etc. complete as per specifications as required.

100 mm width X 60 mm depth X 0.60 mm thickness.

200mm width X 60 mm depth X 0.70 mm thickness.

300 mm width X 60 mm depth X 1 mm thickness.

400 mm width X 60 mm depth X 1.2 mm thickness.

Supply and installation of Information Outlet Category 6 , RJ-45 Information Outlet with IDC Connector terminations

Supply and installation of Cat 6 RJ 45 Connectors with boot.

Supply and installation of 1 Meter Cat 6 UTP Patch Cord

Supply and installation of 1.5 Meter Cat 6 UTP Patch Cord

Supply and installation of 2 Meter Cat 6 UTP Patch Cord

Installation of Cat6 UTP , Patch Panel - 24 ports fully loaded patch panel with rear strain release bar.

Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including 3x3 or suitable size moulded plastic Camera Co box on surface

Supply and installation of Fiber Optic Patch Cord LC-LC, Duplex, Single Mode, 3 metre

Networking Active (B)

Supply, installation and commissioning of Layer 2 manageable NON PoE switch with Non blocking switch fabric having 16-Port with 8x10GBase-T and 8xSFP+ Warranty and Support : Life-Time hardware replacement warranty

Supply, installation and commissioning of Layer 2 manageable Non PoE switch with Non blocking switch fabric having 24x1G , 2x10GBASE-T and 2xSFP+ Warranty and Support : Life-Time hardware replacement warranty

Supply, installation and commissioning of Layer 2 manageable Non PoE switch with Non blocking switch fabric having Full-Width 48x1G, 2x10GBASE-T and 2xSFP+ Warranty and Support : Life-Time hardware replacement warranty

Supply, installation and commissioning of 10G Single Mode SFP Module

Supply, Installation, Testing and Commissioning of 2 MP IP Survillence Camera a) Image Sensor: 1/2.8"" Progressive Scan CMOS b) Max. Resolution: 1920 × 1080 c) Day & Night: IR cut filter d) Lens Type: Fixed focal lens, 2.8, 4, and 6 mm optional e) Protocols: TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour, SSL/TLS, PPPoE, SNMP, WebSocket, WebSockets f) Ethernet Interface: 1 RJ45 g) Basic Event: Motion detection (support alarm triggering by specified target types (human and vehicle)),video tampering alarm,exception h) Video Bit Rate: 32 Kbps to 8 Mbps i) Main Stream: 50 Hz: 25 fps (1920 × 1080, 1280 × 720), 60 Hz: 30 fps (1920 × 1080, 1280 × 720) j) Should have onvif standard k)Vandal-Resistant Camera

Supply, installation and commissioning of (32 Channel NVR 2 SATA DS-7632NI-K2 OR DS-7632NXI-K2 Bundled) Warranty and Support : Life-Time hardware replacement warranty

Supply installation and commissioning of 6TB AV Hard disk