Construction of Narisasakti Karan Kendra at (1) Rai Ta.Limkheda (2) Randhikpur Ta.Singvad, (3) Dhanpur Ta.Dhanpur & (4) Ved of Dhanpur Taluka under 2851 New Gujarat Pattern (TASP) 2024-2025. Package No.2. Dist.Dahod. (Total 04 Works) (Reinvited 4th attempt)

No. figures Amount

Civil Work

1 Excavation for foundation upto 1.5M depth including sorting 243.20 Cu.m. 160.89

out and stacking of useful materials and disposing of the

excavated stuff upto 50 Meter lead.in Dense or Hard Soil.

2 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 24.00 Cu.m. 2679.92

coarse sand : 8- hand broken stone aggregates 40 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

3 Brick work using common burnt clay building bricks having 34.80 Cu.m. 3853.23

crushing strength not less than 35 Kg. / Sq. Cm. in foundation

and plinth in Cement motar 1:6 (1- cement :6-fine sand) (b)

conventional

4 Providing and laying cement concrete work M-200 (1- Cement : 55.20 Cu.m. 4153.88

1.5- Coarse sand : 3- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork and

reinforcement for reinforced concrete work in ( A ) Foundations

footing base of columns and mass concrete

5 Providing and Laying ordinary cement concrete M-200 (1- 2.80 Cu.m. 10869.51

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Columan up to plinth

6 Providing and Laying ordinary cement concrete M-200 (1- 24.40 Cu.m. 7877.05

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Ground Beam

7 Filling available excavated earth (excluding rock) in 185.40 Cu.m. 137.47

trenches. plinth, sides of foundations etc. in layers not

exceeding 20cm. in depth consolidating each disposited

layer by ramming and watering.

layers of 20cm. thickness including watering, ramming and

consolidating etc. completed.

of 20cm. thickness including watering, ramming and

consolidating etc. completed.

10 Providing and laying cement concrete 1:2:4 (1- Cement : 2 32.00 Cu.m. 3653.61

coarse sand : 4- stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork in Foundation and

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

11 Brick work using common burnt clay building bricks having 97.20 Cu.m. 4141.66

crushing strength not less than 35 Kg. / Sq. Cm. in

Superstructure in Cement motar 1:6 (1- cement :6-fine sand)

brick work in superstructure above plinth level up to floor two

level (B) Conveentional

12 Providing and Laying ordinary cement concrete M-200 (1- 17.40 Cu.m. 10869.51

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Column

13 Providing and Laying ordinary cement concrete M-200 (1- 5.40 Cu.m. 10430.85

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Lintel

14 Providing and Laying ordinary cement concrete M-200 (1- 38.80 Cu.m. 7665.49

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Slab

15 Providing and Laying ordinary cement concrete M-200 (1- 23.20 Cu.m. 7877.05

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Beam

16 Providing ISI Mark T.M.T Bar 415 Fe reinfircement for R.C.C. 12400.00 Kg. 68.33

work including binding, and placing in position complete upto

floor two level.

17 Providing 10mm thick cement plaster in single coat on 284.80 Sq.m. 172.04

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:6 (1-cement:6-

18 Providing 15mm thick cement plaster in single coat on 676.00 Sq.m. 201.79

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-

19 Providing 20mm thick cement plaster in single coat on single or 500.00 Sq.m. 229.15

half brick walls for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4 (1cement :4-

20 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 270.40 Sq.m. 1434.75

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

21 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' 27.20 Sq.m. 1120.36

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement. (Double Charged)

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

22 Providing and laying Ceramic tiles 6mm thick in flooring treads of 10.00 Sq.m. 1017.30

steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1-cement : 3-coarse sand ) finishing with flush pointing in white

23 Provinding and laying white glazed tiles 6mm thick in skrting 25.20 Sq.m. 1017.48

risers of steps and dedo on 10 mm thick cement plaster 1:3

(1cement : 3coarse sand) and jointed with white cement slurry.

24 Provoding and fixing steel door with shutter with frame 50 x 50 x 23.80 Sq.m. 2751.54

6 mm. iron angle and BG 18 mm. steel platewith hinges, handle,

stopper, locking arrangement etc. steel work welded in built

section cutting hosting, Finishing on position two coats of oil paint

and one coat etc. comp.

25 Provoding and fixing steel window with shutter with frame 50 x 50 50.40 Sq.m. 4253.20

x 6 mm. iron angle and BG 18 mm. steel platewith hinges,

handle, stopper, locking arrangement etc. steel work welded in

built section cutting hosting, Finishing on position two coats of oil

paint of approved quality over one coat of primer coat etc. comp.

26 Applying two coats of putty & two coats of primer of approved 608.00 Sq.m. 40.59

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

27 Distempeing (Two coats) with oil bound washable distemper of 608.00 Sq.m. 77.30

approved brand and manufacture and of required shade on wall

surfaces to give an even shade, over and including a priming

coat with alkali resistance primer of approved brand after

thoroughly brushing the surface and other foreign matter and

also including preparing the surface even and sand parpered

28 Finishing wall with water proofing cement paint of on wall 302.00 Sq.m. 62.43

surfaces (Two coats) to give an approved brand and

manufacture and of required shape even shade after thoroughly

brushing the surface to remove all dirt and remains of loose

powered materials.

29 Providing and fixing wsh down water closet (Europeantype, W.C. 4.00 Each 1356.81

Pan) with integral P or S trap including jointing the trap with soil

pipe in cement mortar 1:1 (1cement : 1fine sand) (Seal and

cover to be measured and paid for separately) (A) vitreous china

pattern: (i) in white colour

30 Providing and fixing washbasin with single hole for pillar tap with 4.00 Each 1486.04

C.I. or M.S. brackets painted white including sutting holes and

making good the same but excluding fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In

white colour.

31 Providing and fixing Gun metal screw down bib tap (i) 15 mm dia. 8.00 Each 158.86

32 Providing and fixing pillar tap, capstan head, screw down high 4.00 Each 308.73

pressure with screws, shanks and back nuts. (i) 15 mm dia

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

33 Providing and fixing to wall celling and floor 6.0 kg. F/cm2 40.00 Rmt 107.74

working pressure poluthene pipes of the following outside Dia.

Low density, complete with special falnge compression type

fittings, wall clips etc. Including making good the wall celling and

floor. (B) 25mm

34 Providing and laying and jointing with stiff mixture of cement 28.00 Rmt 225.57

mortar in proportion 1:1 selt glazed stoneware pipes including

testing of pipes and joints complete. (A) 100mm dia.

35 Construction brick masonry chamber for underground C.I. 4.00 Each 2932.93

inspection chamber and bends with bricks having croshing

strength not less than 35kg.Cm2 in C.M. 1:5 C.I. cover with

frame and wt of frame 15kg. (R.C.C. top slab with 1:2:4 mix

foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with afloating coat of neat

cement on walls and bed concrete etc. complete. (i) inside

demensions 455mm x 610mm and 450mm deep for single pipe

36 Providing erecting and fixing double coated Syntex PVC. (ISI) 4000.00 liter 3.95

water tank of required capacity each with all necessary fittings

and connection etc.

complete on terrace.

37 Providing soak pit of 5.00 Cum volume including excavating and 4.00 Each 3285.35

filling brickbats with dry masonry work at top for 45cm. Hieight

including covering the top with stone including providing vatas in

C.M. 1:3 with finishing curing etc. complete as directed.

38 Providing C.I. manhole cover 0.60M x 0.45M size having weight 4.00 Each 958.17

not less than 35kg.

39 Providing laying an jointinh in true line and level 15mm dia. 40.00 Rmt 72.65

U.P.V.C. pipe (SCH - 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer in charge. Pipe shall be fixed on the wall

with the help or clamp of every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Total of Civil+Plumbing Work

Electrification Work

40 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm 72.00 Pts. 485.81

& earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multi strand copper wires upto max

length of 10 mt, in below type of pipe erected with 6A Tissino

Type ISI marked flush type switch / bell push and accessories

erected on Metal / PVC/Wooden Box covered with 3 mm thick

PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.(Cat.III)

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

41 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 24.00 Pts. 674.68

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete

42 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 8.00 Pts. 510.05

(Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as

per pipe erected with following type of accessories.[I] For 6A

Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board.(f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling

complete.(Cat.III)

43 Point wiring for on board Looped Plug with 6A Modular type 40.00 Pts. 257.55

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling

with following type accessories.(Cat.III)

44a Providing following type of Modular Type Accessories mounted 56.00 Ea. 25.25

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed

by Engineer In charge.(7) Blank Plate Single

44b (9) 16 Amp. SP one way switch(Cat.III) 8.00 Nos 180.79

44c (10) 6/16Amp. Universal socket (Cat.III) 8.00 Nos 199.98

45 Providing and erecting Mains with 1.1 KV grade FRLS PVC 816.00 Mtrs 82.82

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size.(A) With

medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

46a providing and erecting Mains with 1.1 KV grade FRLS PVC 368.00 Mtrs 112.11

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size.(A) with medium class

Rigid PVC pipe and accessories.(a) 2 wire 4 sq. mm

46b (c) 2 wire 10 sq. mm 40.00 Mtrs 236.34

(use earth wire of 4 sq.mm )

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

47 Supplying and erecting Flexible PVC insulated multi strand multi 24.00 Mtrs 46.46

core 1.1 kv grade ISI marked copper wires of following size to be

erected as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed

48 Providing & erecting Switch board for Computer or electric 24.00 Nos 1133.22

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white front

plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug (Cat.III)

49 Supplying and erecting LED indoor fittings with LEDs of wattage 64.00 Nos 373.70

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.)(A) Tube Light with integral driver(iv)

22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet(Cat.III)

50 Supplying and erecting led lamps with following wattage capacity 4.00 Nos 188.87

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V

in built-surge protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >= 0.5.(A) LED

Lamps integral type, with PC diffuser suitable LAMP holder.(iii)

10 to 15 watts(Cat.III)

51 Supplying and erecting LED street light / Flood light fittings with 16.00 Nos 3345.12

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer

shown.)(A) Street Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with over-voltage

protection.(i) above 36 to 48 watts(Cat.III)

52 providing and erecting Miniature circuit breaker single pole 6A to 56.00 Nos 112.11

25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark.(Cat.III)

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

53 Providing & erecting 240 V MCB double pole switch for motor & 4.00 Nos 299.97

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity.(A)

32 Amp.(Cat.III)

54 Providing & erecting 240 V MCB double pole switch for lighting 4.00 Nos 278.76

Load (B Curve) having 10 KA breaking capacity & confirms to IS

: 8828 in existing box having following capacity.(A) 6 to

Amp.(Cat.III)

55 Sheets steel powder coated enclosure suitable for incorporating 8.00 Nos 176.75

One/Two nos. MCB.

56 Providing and erecting Sheet Steel powder coated MCB 4.00 Nos 1492.78

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for(A) single phase incoming and horizontal single

phase outgoing(iv)12 way

57 providing and erecting Approved make RCCBs conforming to IS: 4.00 Nos 1969.50

12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single

phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed (i) 25 Amps.DP (Cat.III)

58 Providing and erecting Pipe type earthing having 150 cms.long 4.00 Nos 368.65

and 2.5 cms. dia. galvanised iron pipe with coupling and buch

buried in specially prepared earth pit complete with necessary

SWG earth wire.

59 For using salt and charcoal / coke as required for pipe type 4.00 Nos 171.70

60 Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured 240.00 Mtrs 53.53

Aluminium cable 1.1 KV.grade to be erected as directed of

following size. (B) 2 core 4 Sq. mm

61 Providing and erecting Approved make Ceiling fan with double 24.00 Nos 1596.81

ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200

mm. sweep complete, canopy erected on existing hook or clamp

with earthing. [Make shall be approved by Engineer in charge]

62 Supplying and erecting 19 / 20 mm. nominal bore Medium Class 24.00 Mtrs 108.07

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing.

63 Supplying & erecting fan hook box of 10 mm M.S. round bar 24.00 Nos 108.07

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

64 Providing 2.5mm.thick laminated acrylic sheet to cover the fan 24.00 Nos 18.18

hook or Fan box.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

65 Supplying & erecting approved make low noise decorative 4.00 Nos 1703.87

exhaust fan having square frame ABS body with inbuilt lowers &

square frame.200mm with 1350RPM Cat.II

66a Supplying & erecting approved make SMC press moulded 4.00 Nos 898.90

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN rail for

mounting mob & hinged doors as per requirement having

locking arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable clamps& earth

bolt of following size of box.(A) 300mm x 200mm x 100mm

66b (C)150mm x 125mm x 100mm [deep] 16.00 Nos 476.72

67 Supplying and erecting B class Galvanized iron pipe having 16.00 Mtrs 215.13

smooth finished bore of the pipe on both ends erected nuts and

bolts along the pole / wall shaping the pipe as per site

requirement. Pipe dia as following.(B) 32 mm dia

68 Supplying & erecting approved make Digital time switch having 4.00 Nos 3168.37

lithium cell 6 years operative and operate battery backup

channel day clock with 14 memory programme, suitable to

operate on 240V + 5%, 16A with, floating contacts Minimum

switching setup time 1 minimum & LCD display. Also comprised

permanent ON/OFF switching. Programming switches & housed

in fire proof thermoplastic enclosure & transparent cover erected

as required with necessary connection erected as directed.

69 Supplying & erecting power contactor ,AC3 duty for time switch 4.00 Nos 796.89

complete erected as per direction Cat III (A) 2 Pole 250V

Total of Electrification Work

Total (Civil+Electric) TOTAL Rs.

i.e. Rupees Forty Four Lakh(s) Seventy Four Thousand Nine Hundred Forty Two And Paise Thirty Three Only

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as

per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Deputy Executive Engineer Deputy Executive Engineer

Panchayat (R & B) Sub Division Godhra Electrical Sub Division

LIMKHEDA R&B Deptt. Godhra

Divisional Account Officer Executive Engineer

Panchayat (R & B) Division Godhra Electrical Division Executive Engineer

DAHOD R&B Deptt. Godhra Panchayat (R & B) Division